Error: "unable to release the video to external device" HD DVD playback

Similar Questions

• Unable to release the video of external device

  Hello

  I am trying to play a DVD in my DVD play using the Toshiba DVD player software. I get the following error message when I do (paraphrasing):
  Can't get out the video of external device. Use the FN + F5 to change device once you have closed the application.

  I did it but the "device" that I could choose was my laptop LCD - which makes sense because I am not connected to any device.

  I come to this site and saw the comments I could need to install the Realtek Audio driver. I did, restarted and tried again. Still have the same error message.

  Any ideas?
  Thank you!

  Hello

  Just a few questions:
  What cell phone do you have?
  What operating system you are using?
  Have you tried another player like VLC media player?

  Maybe you should try to update the display driver. The audio driver has nothing to do with the video output.

  I don t use Toshiba DVD Player, I m using VLC media player. It s faster and can play most audio and video files.

  Good bye

• Qosmio G30-201 HD DVD "Impossible to the release of the video on a device ext.

  Hello
  Continues to have problems reading of a HD DVD on my Qosmio, using the reader of HD DVD from Toshiba running Vista Ultimate
  Getting two messages:

  "Unable to output the video to an external device. Pls change your display device by pressing end + F % keys after the end of the app '

  and

  "Cannot read. Another application can use the video function of the PC and can be running "."

  I am unable to move in these messages, and Fn + F5 does not solve the problem. I'm trying to display the Qosmio screen, not on an external device. I want to output to a TV via HDMI.

  I last updated the BIOS, driver Nvidia, HD DVD and firmware 20071005144518 and 29 [even if a firmware update said there is no such update available with downloaded.]

  This problem exists with two HD DVD, heroes and Batman Returns.

  Help

  Concerning

  Nick

  Hello

  It seems that you are using Vista Ultimate and not the original Vista that was preinstalled on the Qosmio G30.

  I think I know why Toshiba HD player produces this error message.
  Always is that the Toshiba HD player that is on the page of the Toshiba driver is not a full version but only the update. The full version of the HD DVD from Toshiba drive did not appear on the page of the Toshiba driver due to some restrictions.

  If you want to use the HD DVD player, you must install the Toshiba image, and then you could install the update of the page.
  But note; the recovery CD Toshiba which contains the image will format the whole HARD drive.
  This is why don t forget to back up your data.

• I'm unable to download the video driver for an Aspire 7540 - download is infected

  I'm unable to download the video driver for an Aspire 7540, because the download is infected. Who can be contacted to alert their site Acer seems to have infected files? I checked for a link to the webmaster but could not find one.

  Hi Simon,.

  The ATI for the Aspire 7540 driver was released over 6 years ago and has been downloaded tens of thousands of times. I downloaded and tested the file on our network of company without problem. I think that you can experience a false positive if your anti-virus is indicating that he has a problem.

  Cory

• downloaded 3.6.5 now I am unable to view the videos on you tube

  After an upgrade to firefox 3.6.5 that I find that I am unable to view the videos on you tube even if I'm still able to hear the sound of the video. I went to internet explore one could watch. any help?

  check if all your plugins are up-to-date:
  http://www.Mozilla.com/en-us/pluginCheck/

• Problem with searching for computer on the network. Error: "unable to browse the network. The network is not present or not started. »

  Hello

  I have two NICs connected to my computer for creating hotspot Wifi network. I created successively network Wi - Fi hotspot. But after that when I tried to connect to my local network computers
  My network places-> network-> network Microsoft Windows. I get this error "unable to browse the network. The network is not present or not started. »
  Thank you.

  I am able to fix this by myself.

  The solution that worked for me:
  Run as administrator command prompt.
  Insert the Windows XP Sp3 CD in disc drive (I have xp sp3 installed)
  
  At the command prompt, type in
  
  
  SFC/SCANNOW
  
  
  
  

• Fix it fails Center with the error: unable to get the catalog of the troubleshooter. Error MatsGetSapCatalog failed

  Original title: Fix it center fails.

  Difficulty Center fails with the error:
  Unable to get the catalog of the troubleshooter. Error MatsGetSapCatalog failed
  I can't find the url of re - download.
  It doesn't seem to be at the Download Center.
  Thank you
  Frank C

  Vista Ultimate 64 bit sp2

  

  CF. http://answers.microsoft.com/en-us/protect/forum/mse-protect_scanning/scanning-engine-has-stopped-responding/e0f84bec-2555-4279-bfb7-aff691b8ba8d

• Cannot install software HP7310 for Windows 7 - error: unable to extract the files

  Hello

  I want to reinstall the software for my Officejet HP7310 on my Windows 7 Ultimate 32 of company laptop computer bits.

  I download the software from HP.com site: AIO_CDB_Net_Full_Win_WW_130_141.exe.

  Try to install it, the extraction of files stops at about 88%. Error: Unable to extract the files.

  It seems that the 'Autorun.inf' file is blocked by the McAfee VirusScan Enterprise. McAfee Agent version 4.0.0.1494.

  Can someone help me?

  Thank you

  The problem is resolved. The file has been blocked by McAfee Virus scan.

  After the controls in the properties of McAfee, the problem could be solved.

• Windows dream scene met a fatal error during decoding of the video

  my windows dream scene does not work there is a message that says: "windows dreamscene has encountered a fatal error during decoding of the video". My os is windows vista ultimate. I tried to update and installed the feature with enough space but always has encountered an error. What should I do to recover and use the feature?

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  If you have installed on your computer from Roxio, uninstall it and see if the problem is resolved.

  Method 2:

  If this does not work, let us perform clean boot that could help you solve the issue.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot

  Step 2: Enable half the services

  Step 3: Determine whether the problem returns

  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns

  Step 6: Resolve the problem

  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  After checking the problem, turn the computer back to the Normal mode.

  Uninstall or update the program that is causing the problem.

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• CS6 Illustrator error: "unable to open the Illustration."

  Hello

  I am struggling with a few files Illustrator CS6 which does not more open with read-only error "unable to open the illustration." My illustrator can open on its own and other files are fine, but what happened now 3 of my files and its really frustrating.

  My work around at the moment was to open the corrupted format adobe acrobat files and save as .eps, files open in illustrator, but they aren't always the same thing in the end with layers and etc.

  What can I do for 'uncorrupted' these files in order to open or it least prevent this from happening again?

  You need not go through Acrobat. Simply create a new file in Illustrator and then place (embed) corrupted files.

  To avoid this:

  Make backup copies. Save different versions of files.

  Do not save directly to removable media or networks.

• Error: Unable to get the 'platform' of undefined reference property or null

  I am updating a Web site on a computer that had Dreamweaver Cs4 installed as a transfer file from another computer. I get an error (unable to get the 'platform' of undefined reference property or null). The current computer has Windows7. How to upgrade to the operation of the platform within the program? What is the problem?

  What are you trying to do exactly?

  Files created in DW are not specific platform (they are just .html, .css, .js, etc.), but the program itself is when it's one of the older versions of perpetual license / disc.

  Adobe does not swap the platform for something else that current versions, however the current version (PCOC 2014) is not really specific platform more since you can have it installed on two machines, regardless of the platform. So, basically, ranking/cross-platform interchange is not permitted more.

  Product order | Platform, language Exchange

• Power on VM for the error "unable to open the disc.

  I'm getting snapshot of the virtual machine before increasing the size of the drive with the following command

  vmkfstools x < new disk size > < path of the VMDK file >

  After the above command successfully. I try to open the virtual machine. I got the error "Unable to open the disk" check the status of the size of the drive through VMware infrastructure with the help of the item. Size of the disk was always the same, I increased it manually and switch on the VM, I get error that is attached in this post again.

  Please help how can solve this problem

  I suggest you read - http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1015180.

  From my understanding, you have increased the size of the disk of the child, not the parent disk. Remove the snapshot and do what you've done before. If you want to save the parent vmdk file, it Clone. Hope this picture below will help you better understand;

  

  Thank you

  Ganesh

• LIBTUX_CAT:582: ERROR: unable to save, the full registry table

  When we tried to call one of our service 100 times at the same time we had an error like: -.
  
  181936.547.MLXWTAIXDEV! GWWS.3568042.1.0: LIBTUX_CAT:582: ERROR: unable to save, the full registry table
  182718.591.MLXWTAIXDEV! GWWS.10432990.1.0: LIBTUX_CAT:585: ERROR: registry disabled table slot index past, impossible to cancel registration
  
  
  Can someone help us on why this error is coming.
  
  The configuration of UBB for even is like: -.
  
  MAXACCESSERS 350
  MAXSERVERS 430
  MAXSERVICES 1200
  MAXGROUPS 100
  MAXNETGROUPS 20
  MAXMACHINES 256
  MAXWSCLIENTS = 100
  MAXACLCACHE = 10
  MAXPENDINGBYTES = 100000
  
  
  'TMMETADATA '.
  SRVGRP = "M_JOLT_GRP".
  CLOPT = '- A - / dev_app/dtux5/bin/reposfile f.
  RESTART = Y
  SRVID = 1
  GRACE = 3600
  MAXGEN = 5
  
  'GWWS '.
  SRVGRP = "M_JOLT_GRP".
  CLOPT = '- A - iGWWS1'
  RESTART = Y
  SRVID = 2
  
  Wsdf file
  
  < definition
  xmlns = "http://www.bea.com/Tuxedo/WSDF/2007."
  name = "EBATEST" wsdlNamespace = "urn: salt." EBATEST.wsdl">
  < WSBinding id = "CURTEST_Binding" >
  < SOAP >
  < AccessingPoints >
  < endpoint
  address = "http://10.16.114.145:7001 / ebaapp" id = "eba_HTTP_IN" >
  < / endpoint >
  < / AccessingPoints >
  < / SOAP >
  < Servicegroup id = "ebatestGrp" >
  < name of Service = "SCD_GET_TRD_UND" > < / Service >
  < / Servicegroup >
  < / WSBinding >
  < / definition >
  
  
  And salt file used for manufacturing saltconfig
  
  < deployment xmlns = "http://www.bea.com/Tuxedo/SALTDEPLOY/2007" >
  < WSDF >
  "< import location="/dev_app/dtux5/bin/example.wsdf "> < / Import >
  < / WSDF >
  < WSGateway >
  < GWInstance id = "GWWS1" >
  < inbound >
  < link ref = "EBATEST:CURTEST_Binding" >
  < use endpoint = "eba_HTTP_IN" > < / endpoint >
  < / binding >
  < / entrants >
  Properties of <>
  < property name = "enableSOAPValidation" value = "true" / >
  < / properties >
  < / GWInstance >
  < / WSGateway >
  System <>< / system >
  < / deployment >
  
  
  
  The generated trace file is like: -.
  
  
  184541.717.MLXWTAIXDEV! GWWS.2277636.1034.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
  184541.717.MLXWTAIXDEV! GWWS.2277636.1034.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
  184541.717.MLXWTAIXDEV! GWWS.2277636.1034.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
  184541.718.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
  184541.722.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281396]
  184541.723.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x 1 x4f1968af: SESSION: TIMEOUT VALUE IS [9999]:
  184541.727.MLXWTAIXDEV! svr_errlog.11956518.1.0: username: mamu2:
  184541.727.MLXWTAIXDEV! svr_errlog.11956518.1.0: Sbaw id: 281396:
  184541.727.MLXWTAIXDEV! svr_errlog.11956518.1.0: company id: B21001:
  184541.727.MLXWTAIXDEV! svr_errlog.11956518.1.0: business msg: invalid user: ID entered is not valid
  184541.727.MLXWTAIXDEV! svr_errlog.11956518.1.0: name of the Service: SVC_SESSION
  184541.727.MLXWTAIXDEV! svr_session.11043070.1.0: no data in the Session table for: mamu2:,: 281396:
  184541.728.MLXWTAIXDEV! GWWS.2277636.1.0: GWWS_CAT:21: WARNING: Tuxedo service returns TPFAIL.
  184541.729.MLXWTAIXDEV! GWWS.2277636.777.0: TRACE: ms: Send a http message net, index of SCO = 4095
  184700.521.MLXWTAIXDEV! GWWS.2277636.1291.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
  184700.521.MLXWTAIXDEV! GWWS.2277636.1291.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
  184700.521.MLXWTAIXDEV! GWWS.2277636.1291.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
  184700.522.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
  184700.522.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
  184700.523.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 2: SESSION: TIMEOUT VALUE IS [9999]:
  184700.524.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 2: SESSION: SESSION [281397] IS VALID:
  184700.538.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
  184700.538.MLXWTAIXDEV! GWWS.2277636.1034.0: TRACE: ms: Send a http message net, index of SCO = 4095
  184707.691.MLXWTAIXDEV! GWWS.2277636.1034.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
  184707.691.MLXWTAIXDEV! GWWS.2277636.1034.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
  184707.691.MLXWTAIXDEV! GWWS.2277636.1034.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
  184707.692.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
  184707.693.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 3: SESSION: TIMEOUT VALUE IS [9999]:
  184707.694.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 3: SESSION: SESSION [281397] IS VALID:
  184707.710.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
  184707.711.MLXWTAIXDEV! GWWS.2277636.1291.0: TRACE: ms: Send a http message net, index of SCO = 4095
  184707.718.MLXWTAIXDEV! GWWS.2277636.1548.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
  184707.718.MLXWTAIXDEV! GWWS.2277636.1548.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
  184707.718.MLXWTAIXDEV! GWWS.2277636.1548.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
  184707.718.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
  184707.718.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
  184707.719.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 4: SESSION: TIMEOUT VALUE IS [9999]:
  184707.719.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 4: SESSION: SESSION [281397] IS VALID:
  184707.732.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
  184707.732.MLXWTAIXDEV! GWWS.2277636.1548.0: TRACE: ms: Send a http message net, index of SCO = 4095
  184707.738.MLXWTAIXDEV! GWWS.2277636.1034.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
  184707.738.MLXWTAIXDEV! GWWS.2277636.1034.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
  184707.739.MLXWTAIXDEV! GWWS.2277636.1034.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
  184707.739.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
  184707.739.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
  184707.739.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 5: SESSION: TIMEOUT VALUE IS [9999]:
  184707.740.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 5: SESSION: SESSION [281397] IS VALID:
  184707.756.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
  184707.756.MLXWTAIXDEV! GWWS.2277636.1034.0: TRACE: ms: Send a http message net, index of SCO = 4095
  184707.769.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
  184707.769.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
  184707.769.MLXWTAIXDEV! GWWS.2277636.777.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
  184707.769.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
  184707.770.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
  184707.770.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x 6 x4f1968af: SESSION: TIMEOUT VALUE IS [9999]:
  184707.771.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x 6 x4f1968af: SESSION: SESSION [281397] IS VALID:
  184707.798.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
  184707.799.MLXWTAIXDEV! GWWS.2277636.777.0: TRACE: ms: Send a http message net, index of SCO = 4095
  184707.807.MLXWTAIXDEV! GWWS.2277636.1548.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
  184707.807.MLXWTAIXDEV! GWWS.2277636.1548.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
  184707.807.MLXWTAIXDEV! GWWS.2277636.1548.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
  184707.807.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
  184707.807.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
  184707.808.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x 7 x4f1968af: SESSION: TIMEOUT VALUE IS [9999]:
  184707.808.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x 7 x4f1968af: SESSION: SESSION [281397] IS VALID:
  184707.821.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
  184707.821.MLXWTAIXDEV! GWWS.2277636.1291.0: TRACE: ms: Send a http message net, index of SCO = 4095
  184707.831.MLXWTAIXDEV! GWWS.2277636.1291.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
  184707.831.MLXWTAIXDEV! GWWS.2277636.1291.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
  184707.831.MLXWTAIXDEV! GWWS.2277636.1291.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
  184707.831.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
  184707.831.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
  184707.832.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 8: SESSION: TIMEOUT VALUE IS [9999]:
  184707.832.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 8: SESSION: SESSION [281397] IS VALID:
  184707.843.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
  184707.843.MLXWTAIXDEV! GWWS.2277636.1291.0: TRACE: ms: Send a http message net, index of SCO = 4095
  184707.855.MLXWTAIXDEV! GWWS.2277636.1291.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
  184707.855.MLXWTAIXDEV! GWWS.2277636.1291.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
  184707.855.MLXWTAIXDEV! GWWS.2277636.1291.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
  184707.855.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
  184707.856.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
  184707.856.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 9: SESSION: TIMEOUT VALUE IS [9999]:
  184707.857.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 9: SESSION: SESSION [281397] IS VALID:
  184707.869.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
  184707.869.MLXWTAIXDEV! GWWS.2277636.1548.0: TRACE: ms: Send a http message net, index of SCO = 4095
  184707.876.MLXWTAIXDEV! GWWS.2277636.1291.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
  184707.876.MLXWTAIXDEV! GWWS.2277636.1291.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
  184707.876.MLXWTAIXDEV! GWWS.2277636.1291.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
  184707.876.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
  184707.876.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
  184707.877.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af xa: SESSION: TIMEOUT VALUE IS [9999]:
  184707.877.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af xa: SESSION: SESSION [281397] IS VALID:
  184707.899.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
  184707.899.MLXWTAIXDEV! GWWS.2277636.1291.0: TRACE: ms: Send a http message net, index of SCO = 4095
  184707.906.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
  184707.906.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
  184707.906.MLXWTAIXDEV! GWWS.2277636.777.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
  184707.907.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
  184707.907.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
  184707.907.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af xb: SESSION: TIMEOUT VALUE IS [9999]:
  184707.908.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af xb: SESSION: SESSION [281397] IS VALID:
  184707.918.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
  184707.919.MLXWTAIXDEV! GWWS.2277636.777.0: TRACE: ms: Send a http message net, index of SCO = 4095
  184707.932.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
  184707.932.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
  184707.932.MLXWTAIXDEV! GWWS.2277636.777.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
  184707.932.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
  184707.932.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
  184707.933.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af xc: SESSION: TIMEOUT VALUE IS [9999]:
  184707.933.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af xc: SESSION: SESSION [281397] IS VALID:
  184707.945.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
  184707.945.MLXWTAIXDEV! GWWS.2277636.1034.0: TRACE: ms: Send a http message net, index of SCO = 4095
  184707.957.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
  184707.957.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
  184707.957.MLXWTAIXDEV! GWWS.2277636.777.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
  184707.957.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
  184707.957.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
  184707.958.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af xd: SESSION: TIMEOUT VALUE IS [9999]:
  184707.958.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af xd: SESSION: SESSION [281397] IS VALID:
  184707.973.MLXWTAIXDEV! GWWS.2277636.1.0: LIBTUX_CAT:585: ERROR: registry disabled table slot index past, impossible to cancel registration
  184707.973.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
  184707.973.MLXWTAIXDEV! GWWS.2277636.1548.0: TRACE: ms: Send a http message net, index of SCO = 4095
  184707.980.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
  184707.980.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
  184707.980.MLXWTAIXDEV! GWWS.2277636.777.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
  184707.980.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
  184707.980.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
  
  
  Kind regards
  Anurag

  Hello

  Tuxedo documentation, LIBTUX_CAT:582 is described as follows with a recommended action.

  >
  582

  ERROR: Unable to save, the full registry table

  Description

  The BEA TUXEDO system was trying to find a location in the registry table for a process, but the registry table was full.

  Action

  Increase the MAXACCESSERS parameter in the UBBCONFIG file, rebuild the TUXCONFIG file, and then restart the application and try again.

  >

  So try increassing MAXACCESSERS and see if the problem goes away.

  Kind regards
  Todd little
  Chief Architect of Oracle Tuxedo

• R12 rapidwiz error on node2 - AC-00002: error: unable to create the log file

  Over multiple node R12 on Enterprise Linux 4 installation fees. below error is encountered on node2
  
  AC-00002: error: unable to create the log file
  The installation was successful on the database node and the main node of the Application. On the primary Application node only ' lot
  
  Treatment services are enabled.
  
  However, when installing on the application additional node the rapidwiz is errors
  
  "AC-00002: error: unable to create the log file - $INST_TOP/$CONTEXT_NAME/logs/12202114.log.
  Exception in thread "AWT-EventQueue-0" java.lang.RuntimeException: AC-00002: unable to create the log file.
  $INST_TOP/$CONTEXT_NAME/logs/12202114.log
  
  I tried to install several times but every time it failed with the same message
  
  I think that the reason for the failure:
  
  I am writing on a mounted NFS on Node2. If I access a NFS mount from one server other than of its origin, the root of the application server user is considered person not the user.
  I checked this by pressing a file being logged in as root:
  
  -rw - r - r - 1 person person 0 20 Dec 10:59 abc
  
  I mounted node2 successfully using
  Mount-t nfs nas1: / erparch /erparch
  
  Rapidwiz version is 12.0.0.20
  
  What are the steps to take in order to proceed with the installation on the second node.

  user10126380 wrote:
  I think that the reason for the failure:

  I am writing on a mounted NFS on Node2. If I access a NFS mount from one server other than of its origin, the root of the application server user is considered person not the user.
  I checked this by pressing a file being logged in as root:

  -rw - r - r - 1 person person 0 20 Dec 10:59 abc

  I think you've correctly identified the source of your problem. By default, the NFS mounts are usually created with the 'root_squash' option, where the user root on a remote system creates its files as the anonymous user ('nobody' in most cases) on the exported NFS volume. It is usually a good practical security; However, in your case, you need to export the NFS volume with no_root_squash to allow the user root on Node2 to create files as expected when you run RapidWiz. Once installation is complete, you should be able to go back to using the default root_squash option, as the following files in the filesystem level of demand will be created by non-root users.

  Your system administrators may not be happy with the idea of an export of no_root_squash, and I wouldn't blame them. :-) If there is dispute, make sure that they understand that it is only for the duration of the installation of the EBS, and she can (and should) be powered once the installation is complete and verified to work.

  These two articles offer a brief explanation of the purpose and value of the NFS mount root_squash/no_root_squash export options.

  Kind regards

  John P.
  http://only4left.jpiwowar.com

  Published by: jpiwowar on December 21, 2009 21:38

• Unable to adjust the video camera

  I can't set my video cam. The image is blurry and has spots

  Original title: my video cam. / I can't adjust my video cam. The image is blurry and has spots

  Hello

   
  1. What is the brand and model of the computer?

  2. What is the status of the webcam in Device Manager?

  Reference:
  Open the Device Manager
  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager
  
  3. it worked before?
  4. doesn't this problem occurs when you use the webcam with any particular application? (For example: Skype, MSN)?
  5. do you receive any error messages?
  6. is the built-in video cam to the computer or external? If it is external, is it connected via USB?
   

  Make sure that these things when you take a picture.

  
  a. increase the lighting on your desktop or in the area where you want to use the webcam. Additional light will provide photo taking images correctly and reduce the blur in images.

  b. replace the camera lenses so that sufficient distance to capture the images correctly. This is particularly useful for webcams that have a fixed focal length.

   
  I suggest you provide more information about the issue so that we can better help you.
  "Your question contains all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help. »
  See this link for more information on:
  http://support.Microsoft.com/kb/555375