Unable to release the video of external device

Similar Questions

• Error: "unable to release the video to external device" HD DVD playback

  Hi all this makes me crazy,

  I install only the updates mentioned on the site, but I get the following message appears when you try to play a HD DVD on the notbook or through my Tv.

  + Output of the external device video impossible. Please check the external output setting after the end of the application. +

  Thanks for any help in advance.

  Stew

  Hello

  I found a good thread posted several days.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=114726𜀦

  There is exactly the same problem and a link to the document from Toshiba with the solution.

  According to this doc Realtek Audio Driver for Windows Vista installation or update should correct this problem.

  Check it out and please give me feedback.

  Good bye

• Qosmio G30-201 HD DVD "Impossible to the release of the video on a device ext.

  Hello
  Continues to have problems reading of a HD DVD on my Qosmio, using the reader of HD DVD from Toshiba running Vista Ultimate
  Getting two messages:

  "Unable to output the video to an external device. Pls change your display device by pressing end + F % keys after the end of the app '

  and

  "Cannot read. Another application can use the video function of the PC and can be running "."

  I am unable to move in these messages, and Fn + F5 does not solve the problem. I'm trying to display the Qosmio screen, not on an external device. I want to output to a TV via HDMI.

  I last updated the BIOS, driver Nvidia, HD DVD and firmware 20071005144518 and 29 [even if a firmware update said there is no such update available with downloaded.]

  This problem exists with two HD DVD, heroes and Batman Returns.

  Help

  Concerning

  Nick

  Hello

  It seems that you are using Vista Ultimate and not the original Vista that was preinstalled on the Qosmio G30.

  I think I know why Toshiba HD player produces this error message.
  Always is that the Toshiba HD player that is on the page of the Toshiba driver is not a full version but only the update. The full version of the HD DVD from Toshiba drive did not appear on the page of the Toshiba driver due to some restrictions.

  If you want to use the HD DVD player, you must install the Toshiba image, and then you could install the update of the page.
  But note; the recovery CD Toshiba which contains the image will format the whole HARD drive.
  This is why don t forget to back up your data.

• I'm unable to download the video driver for an Aspire 7540 - download is infected

  I'm unable to download the video driver for an Aspire 7540, because the download is infected. Who can be contacted to alert their site Acer seems to have infected files? I checked for a link to the webmaster but could not find one.

  Hi Simon,.

  The ATI for the Aspire 7540 driver was released over 6 years ago and has been downloaded tens of thousands of times. I downloaded and tested the file on our network of company without problem. I think that you can experience a false positive if your anti-virus is indicating that he has a problem.

  Cory

• downloaded 3.6.5 now I am unable to view the videos on you tube

  After an upgrade to firefox 3.6.5 that I find that I am unable to view the videos on you tube even if I'm still able to hear the sound of the video. I went to internet explore one could watch. any help?

  check if all your plugins are up-to-date:
  http://www.Mozilla.com/en-us/pluginCheck/

• Driver card CODE 31 and unable to update the video.

  Original title: why I'm unable to update my video driver

  I just added a new driver of "Adding of MATERIAL LEGACY" Intel(r) G35 Express Chipset Family (Microsoft Corporation - WDDM 1.1)

  but it does not work and it is showing a yellow mark "Code 31"
  Please help me with the love of God

  my device name is INTEL (R) 915 G, 915GV, 910GL, chip chart

  Hello

  Have you tried using the Intel® driver update utility to automatically scan your system?

  You can try to delete the driver installed on the computer graphics card and then reinstall the same by checking the driver updates by using Windows Update. Check if it helps.

  For more information, see the article:

  Automatically get recommended drivers and updates for your hardware

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Unable to adjust the video camera

  I can't set my video cam. The image is blurry and has spots

  Original title: my video cam. / I can't adjust my video cam. The image is blurry and has spots

  Hello

   
  1. What is the brand and model of the computer?

  2. What is the status of the webcam in Device Manager?

  Reference:
  Open the Device Manager
  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager
  
  3. it worked before?
  4. doesn't this problem occurs when you use the webcam with any particular application? (For example: Skype, MSN)?
  5. do you receive any error messages?
  6. is the built-in video cam to the computer or external? If it is external, is it connected via USB?
   

  Make sure that these things when you take a picture.

  
  a. increase the lighting on your desktop or in the area where you want to use the webcam. Additional light will provide photo taking images correctly and reduce the blur in images.

  b. replace the camera lenses so that sufficient distance to capture the images correctly. This is particularly useful for webcams that have a fixed focal length.

   
  I suggest you provide more information about the issue so that we can better help you.
  "Your question contains all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help. »
  See this link for more information on:
  http://support.Microsoft.com/kb/555375
  
   

• HP Support Assistant is unable to install the drivers wireless wireless device not recognized at startup

  Name and product number:

  HP Envy Sleekbook4 PC / / C2K72UA #ABA

  Intel Centrinto Wireless-N 2230

  Microsoft Kernel Debug network adapter

  Realtek PCIe GBE Family Controller

  USB - IF xHCI USB Host controller (Intel WiUSB)

  Inter 7 series / C216 Chipset Family USB Enhanced Host Controller - 1E26 (there is a similar device that works but ends with 1E2D)

  System Operalting:

  Latest Windows 8

  No error message.

  Changes:

  Uninstalled some things via the control panel (I don't know where I can find a newspaper which has been uninstalled)

  Attempt to system restore and it failed.

  My diagnosis:

  First of all, some info on why the devices do not work.

  The USB controller claims there are insufficient system resources to complete the API. However, I am only using about 20% of my memory and my hard drive. If I deactivate and reactivate the device through Device Manager it starts working until the computer passes in mode 'sleep' or reboots.

  The Realtek PCIe controller and Intel Centrino Wireless adapter simply read {operation failed}. If I disable and re-enable these devices via Device Manager they begin to work until the computer mode "sleep" or reboots.

  The Microsoft Kernel Debug network adapter "is not present, is not working properly or is not all its drivers installed."

  Intel WiUSB - windows cannot load the drivers for this device (code 31).

  The HP support assistant tries to download and install "Wireless for windows drivers 8. The download succeeds, but the installation fails.

  At startup, windows thinks that there are no network adapters (other than bluetooth). After the reboot of the devices from the Device Manager, they appear in the section of the network adapters.

  Thank you in advance for reading this and any help you may be able to offer,

  Tim

  I see. Unfortunately, the failure of the short DST means that the hard drive needs to be replaced. The computer is still under warranty?

  If so, you can contact HP Technical Support and ask them to send you a replacement. This replacement will come with recovery media. If you don't have an external CD drive, make sure you request a recovery rather than recovery disks USB. They should know that the model already, but, I would make sure. Once you have received the new hard disk, you will need to send the back of an old man in this same area, using the provided shipping label. The technician on the phone will give you the details on that.

  HP 1-800-474-6836 Technical Support

  If the computer is out of warranty, you can replace it with any HDD notebook 2.5 ". If you need help choosing a car, let me know

• Is the possible to external device recovery?

  Hi @all,

  I have a Satellite M30x-134. My DVD player damaged a moment my question:

  How can I recover my system (Windows xp) with a damaged internal drive?

  Is it possible to leave an external via USB dvd drive or a USB?

  Can you tell me the parameters of this procedure?

  Many, many thanks and greetings,
  EGGE

  It is theoretically possible, but not so easy to do. USB option does not work. What you can try is to use the external CD/DVD drive, but it won't work so easy. The reason is that this external device will be recognized automatically.

  I didn't try, but I'm sure you must start your laptop with disk boot BACK, BACK to load a driver for the external device to access and as the last step of the installation of recovery.
  It's quite complicated.
  Best solution for you is to check eBay, buy the new optical disk drive, be happy with many of the workbook.

• front usb ports are unable to detect the large capacity external hard drive (250 GB)

  Hello
  I have 250 GB external hard drive, whenever I connect to my front usb ports it detected, but pen drives, are to detect flash drives, one of my friends said that you need to update my bios & I here is the motherboard.

  motherboard: Mercury 945gcm

  It is possible that the USB 1.1 and not 2.0 ports that can explain the problem.  In addition, sometimes USB ports out enough power to run an external device that is not powered separatelly.  I don't know if updating the BIOS will help, but if there is an update available for your system (and it MUST be for your system - big bad can occur if you install the wrong BIOS so get with the computer manufacturer, and speak to a representative to confirm that they are appropriate for your system AND your version of Vista) then by all means install it and see if that solves the problem.  You can also get the updated drivers for the motherboard manufacturer, at the same time and see if that helps as well.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• See the video on external HD display in PP 5.0.3

  Hello, I am new to first CS5, and I searched for a few hours and can't figure out how HD video to an external monitor for HD in Premiere Pro 5.0.3 and Blackmagic Design card.  I can see and choose all presets of Blackmagic, watch the video Source and the monitor in the first program, but nothing doesn't appear on my Samsung HDTV. It works in FCP where I can choose from more than 2 dozen HD video monitor or Apple Cinema Desktop playback options.  Any guidance will be greatly appreciated.

  Jim

  You put the player affecting Blackmagic in preferences AND all have on a timeline of sequence type Blackmagic?  You need both.

• iPhone 6 is unable to play the video in the ios 10

  As the title, my iphone cannot play videos on my phone. My iPhone is running ios 10. Please help me. Thank you.

  have you tried to restart it? Restart your iPhone, iPad or iPod touch - Apple Support

  have you tried to record a new video and see if the phone that will play?

  have you tried to import the videos to a computer and try to play them?

• Unable to see the videos

  I have a HP Pavilion g7, produced #D1C31UA #ABA.  I can't watch videos all of a sudden.  Just get a green screen.  Not updated anything before it happens

  Hello

  If this problem is only with online such as Youtube videos, try a new installation of the Flash plug-in as follows.

  First, download the Flash uninstall utility on the link below and save it in your downloads folder.

  Flash Player Uninstaller.

  Once the download is complete, close all the browser windows, open your downloads folder and run the program uninstaller.  After this has completed, restart the laptop.

  Then (unless you already have it), download and install Firefox , then using Firefox, download and install the latest version of Adobe Flash. Note: You can deselect the option to include McAfee Security Scan Plus before download. 

  Close all browser windows before you run the installer of Flash.

  Start Firefox and see if the videos etc. play Ok in this browser - if they do, close Firefox, open Internet Explorer and click the Adobe Flash even link above to get a prompt to install Flash.  Once completed, restart Internet Explorer.

  Kind regards

  DP - K

• Unable to save the files to my device (Flash disk)

  Unable to save the files in my flash drive. It is given the message that it is complete, although it is not even half full. Furthermore, when I tried to eject, there will be a message that I have shuold close all files using even when there is none.

  Thank you

  First of all, I would like to make a backup of all the files somewhere safe. Just in case something goes wrong. I would like to make a copy of the files on the computer. Format the USB. Then copy the files over. If after a format, it still has the same problem or she leaves you nothing copy on then the memory stick may be dying on you and her is to buy another.

  Good luck

  Free Support Tools

• Windows Media Player unable to play the video

  -Player multimedia Windows no longer works on Windows Vista Edition Home Premium

  Windows Media Player for Vista Home Premunin

  When I go to play the videos I get an error message that windows meda player no longer works. I went in my programs and control panel and there seems to be no program for medai player. Can I download a new version and where?

  Thank you

  Hi redese,

  (1) what is you receive the exact error message?

  (2) remember to make changes to the computer before this problem?

  Step 1: Launch Windows Media Player

  Click the Start button > type in Windows Media Player in the search box and press enter

  I would like to know if you can start the player and play audio files

  Step 2: You can run the fixit available in the link below and check if this solves the problem.

  When I try to use Windows Media Player 11, the program does not start, or some UI elements are blank

  http://support.Microsoft.com/kb/925704/en-us

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.