CS6 Illustrator error: "unable to open the Illustration."

Similar Questions

• Power on VM for the error "unable to open the disc.

  I'm getting snapshot of the virtual machine before increasing the size of the drive with the following command

  vmkfstools x < new disk size > < path of the VMDK file >

  After the above command successfully. I try to open the virtual machine. I got the error "Unable to open the disk" check the status of the size of the drive through VMware infrastructure with the help of the item. Size of the disk was always the same, I increased it manually and switch on the VM, I get error that is attached in this post again.

  Please help how can solve this problem

  I suggest you read - http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1015180.

  From my understanding, you have increased the size of the disk of the child, not the parent disk. Remove the snapshot and do what you've done before. If you want to save the parent vmdk file, it Clone. Hope this picture below will help you better understand;

  

  Thank you

  Ganesh

• VLC is unable to open the MRL

  I use vlc2.0.2.

  IAM trying to load the selection of jamendo.
  but I got error
  
  
  "Your entry cannot be opened:

  VLC is unable to open the MRL 'http://api.jamendo.com/get2/stream/track/redirect/?id=340052 '. Check the log for details".

  
  

  IAM add vlc in the firewall exceptions.

  but no change.

  Why is that.

  Hello

  (1) have you made changes before the start of this issue?
  (2) you are able to open different files using VLC?
  (3) is the specific issue of VLC Player?

  I suggest you to contact the VLC support for assistance.

  www.videolan.org/support/

• After my Acrobat reader DC crashed I'm unable to open the edit document in Acrrobat Reader option DC is this a bug in ms

  IK heb Acrobat reader DC gedownload in try some elements ITU, tijdens het bewerken van een document crashde of application. Na het opnieuw opstarten kan ik optie bewerken document niet meer openen, Kon ik niets meer in het document kan doen. Zijn er mensen die said ook against fishermen zijn in hoe IK zij have said.

  Hi Sarah,.

  There is no error message. I solved the problem by now just run the

  installation program again.

  Please help us well.

  concerning

  John

  2016-02-03 18:37 GMT + 01:00 Aadesh2789 [email protected]>:

  After that my Acrobat reader DC I'm unable to open the edit document

  option Acrrobat CD player is a bug in MS created by Aadesh2789

  https://forums.Adobe.com/people/Aadesh2789> in Acrobat Reader - view

  the discussion complete https://forums.adobe.com/message/8459496#8459496>

• [msg.dictionary.load.openFailed] unable to open the config.ini file: the system cannot find the specified file.

  Hi, I have a virtual machine with Windows server 2008 R2 x 64-bit, with SharePoint 2010 installed, it was working perfectly before and now I get this error when I take it back.

  [msg.dictionary.load.openFailed] unable to open the file 'C:\Users\MyUserName\AppData\Roaming\VMware\config.ini': the system cannot find the specified file.

  consult the file and I have not found this config.ini file, so I created an empty file with the same name, but still, I get the error

  any suggestion

  Thank you

  Take a look at http://kb.vmware.com/kb/2032746 which describes this problem. You should also see what file is causing the problem when you check vmware.log virtual machine.

  André

• A general error occurred; to open the file

  Just added a 3rd esx 3.5 server to the cluster.  Configurations correspond to one extreme I can say.  But when I try to migrate a virtual machine from one of the other two for one third of the error a general system error occurred, unable to open the file appears.  We even tried rebuilding esx server and it time to the cluster but nothing helped.

  I read in some other threads you need to right click on the virtual machines that you cannot migrate and update the virtual machine hardware.  How this is done? As far as I know this ability is in vsphere but not 3.5. Any ideas that might help?  Help, please!

  Thank you

  SB

  If you can, power off the virtual machine and perform the migration or the power off and then turn on the virtual computer and try the migration again. I've seen this several times before, usually after I completed a storage VMotion on the virtual machine in question. Update the virtual machine hardware is possible if the virtual machine is turned off so why you can currently see as an option.

  Update: Assuming that you are unable to restart the virtual machine, make sure that the data store host you ar migration has added data warehouses the same virtual machine host is currently enabled. For example, esx1 a vm1 with a store of data added by FULL domain name, esx2 will be the new home for vm1 and has the same data store has esx1, but the data store has been added by its IP address. Although the two data stores appear to be identical (i.e. going to Configuration - Storage shows them both identical) they are because they were added in different ways. This translates into different UUID, which causes the error experienced. More information on this subject can be found here: http://kb.vmware.com/kb/1004906

• ORA-39070: unable to open the log file, while using expdp

  Hello
  Please notice why I get ORA-39070: unable to open the log file.
  When you run the expdp against the default directory: the expdp DATA_PUMP_DIR is completed successfully.
  
  -current direcory on the Linux file system:

  $ pwd
  /log_files/oracle/cdl1

  -Create directory and grant of read/write on it

  $ sqlplus sys/xxxx@cdl as sysdba
  SQL*Plus: Release 11.2.0.3.0 Production on Wed Feb 22 16:36:01 2012
  Copyright (c) 1982, 2011, Oracle.  All rights reserved.
  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
  With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,
  Data Mining and Real Application Testing options
  
  SQL> create or replace directory EXPTEMPDIR as '/log_files/oracle/cdl1';
  Directory created.
  
  SQL> grant read,write on directory EXPTEMPDIR to system;
  Grant succeeded.

  -Verify the existence of the directory:

  QL> select * from dba_directories;
  
  OWNER      DIRECTORY_ DIRECTORY_PATH
  ---------- ---------- --------------------------------------------------
  ...
  SYS        EXPTEMPDIR /log_files/oracle/cdl1
  ...

  Check for permission to write to the directory:

  [/log_files/oracle/cdl1]$ touch 1
  [/log_files/oracle/cdl1]$ ls -l
  total 0
  -rw-r--r-- 1 oracle oinstall 0 Feb 22 16:38 1

  -try to expdp:

  expdp system/xxxx@cdl FULL=y DIRECTORY=EXPTEMPDIR dumpfile=expfull220212.dmp
  Export: Release 11.2.0.3.0 - Production on Wed Feb 22 16:38:33 2012
  Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.
  Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
  With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,
  Data Mining and Real Application Testing options
  ORA-39002: invalid operation
  ORA-39070: Unable to open the log file.   <<<<<<<<=======
  ORA-29283: invalid file operation
  ORA-06512: at "SYS.UTL_FILE", line 536
  ORA-29283: invalid file operation

  Post pl OS details - it's an RAC instance?

  Error ORA-39002 ORA-39070 ORA-29283 ORA-6512 when you use Export DataPump (EXPDP) [ID 1305166.1]
  Export DataPump (EXPDP) triggers errors ORA-39002 ORA-39070 ORA-29283 ORA-6512 on RAC Instance [1317798.1 ID]

  HTH
  Srini

• When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  This has happened

  Each time Firefox opened

  I tried to download firefox.

  User Agent

  Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; AntivirXP08; GTB6.3; .NET CLR 2.0.50727; MS - RTC LM 8)

  When you click on the download link on GetFirefox.com, you should be asked if you want to run or save the file. If this situation occurs when you try to run the download, try instead to record and put the file on your desktop or in a similar place, where you are certain that you can find.

  When the download is complete, try double-clicking on the downloaded file in the normal Windows Explorer (browse your way to the file from the desktop). This should start the installation.

  If, in the Explorer window, you notice that the file seems to be missing the Firefox icon orange/blue, right click the file and select Properties. The image should look like the attached picture (except that mine is in Danish, but that is irrelevant) if saved correctly - if it don't look like this, would you please describe the content or attach a screenshot of the box. Especially what it says under "File Type" - it must be 'program '. If this isn't the case, will have to focus on what could be the problem here.

  A bit off-topic, your Internet Explorer seems to be quite a bit outdated (IE 6, where the current version is IE 8), so I highly recommend that you try to run Windows Update to get your system up to date. Is it as a society (such as a thin client Terminal Server computer) system, this is not possible, and most likely, your system administrator will have to help you.

• Satellite U405 - S2833 Fingerprint error: could not open the sensor

  Hello, I am very new to the forums so I apologize in advance if I don't give all the necessary accurate information in this thread.

  I have a Toshiba U405-S2833 and it came with the TrueSuite Access Fingerprint Software.

  I downloaded an update a few days ago, but I don't remember if it's for Vista or Toshiba. Since then, my fingerprints were all removed from the system, and when I try re - save, I get this error message "error: could not open the sensor" I can't find the material to fix the sensor manually without going through the TrueSuite software.

  Any help would be greatly appreciated.
  Thanks in advance

  I am also having the same problem.

  My boss uses a Satellite U405-2628 fingerprinting and with the sensor TrueSuite Access Manager. It worked fine, then I updated windows and it has stopped working. I was on the updates and noticed an update of TrueSuite and thought that maybe that was messed up things.

  Then there were other issues that went past me locked out of the machine (anti-virus and loss of relationship with the field... also my fault). So I decided to wipe the machine and install fresh Vista.

  I installed everything but the TrueSuite software still not able to open the sensor. After hitting my head on it, I decided enough was enough and I restored it using Toshiba recovery disks.

  It took a few hours and here I am logged in as administrator and the TrueSuite software still cannot open the sensor. I don't know what I can do, since it is to return to the factory settings.

  As the above poster said, HELP!

  Thank you.

  ... a little later...

  Well, I managed to do work, and this can be useful for some people out there since I found no easy answers. I can't guarantee anything, and it's really complicated... so here go us.

  First, I downloaded the latest update from Toshiba (util_fingerprint_27460A.exe) and nothing has worked.
  Then I uninstalled the sensor since (click right, uninstalled) Device Manager to uninstall the driver as well (it should invite you to do so)
  Then, still in the Device Manager, I scanned for new hardware and it came with my sensor. I said to look for drivers and when he could not find, I think it gave me an option for windows search for an answer... or something like that. He came back with a link to Authentec (www.authentec.com/win7update/w7wbf32.exe, I think). So I downloaded that and installed. He rose through the device under "Biometric devices" then before... I think it's under the "Personall security device" or something like that. But alas, still no luck. So I uninstalled all the device from the Device Manager (taking care of uninstalling the driver as well) and of the TrueSuite software. Then came the break I was looking for.

  Online research I came across this page... http://members.driverguide.com/driver/detail.php?action=download&driverid=1194755. I had the chance before to DriverGuide.com so I thought what the heck. It is a driver of HP for the same sensor and it is dated 2006. So I downloaded and installed. Still nothing...

  Disgusted, I thought, well let's try to install util_fingerprint_27460A.exe on top of that. So I did, restarted and I couldn't believe my eyes when he said to connect and register fingerprints not seriously. And so I did. I hope this helps people, I don't really know how the sensor I so messed up, but I'm glad it worked.

  Yet one thing... and this may be important. When I took TrueSuite first after doing all this, he told me that the storage of fingerprints was full... or something in that sense. So I clicked the button remove all traces of fingers button and it I would like to register my fingerprints. I'm starting to wonder if that was all I had to do in the first place... Guess I'll never know.

  Good luck.

  Post edited by: rewind22x

• OSX 10.11.2 on end of 2008 with the graphic card Nvidea Quadr 4000 MacPro is unable to open the Nvidea driver manager in System Preferences, CUDA work and updates. Any suggestions? Have tried to install updtyer Combi for OSX.

  OSX 10.11.2 on end of 2008 with the graphic card Nvidea Quadro 4000 MacPro is unable to open the Nvidea driver manager in System Preferences, CUDA work and updates. Any suggestions? Have tried to install Combi updater for OS x, the problem persists.

  If I remember someone else reported the same problem yesterday and Nvidia suggested to reinstall OS x. If yo boot into Recovery and reinstall without formatting nothing should be lost but backup before just I case.

• Problem with searching for computer on the network. Error: "unable to browse the network. The network is not present or not started. »

  Hello

  I have two NICs connected to my computer for creating hotspot Wifi network. I created successively network Wi - Fi hotspot. But after that when I tried to connect to my local network computers
  My network places-> network-> network Microsoft Windows. I get this error "unable to browse the network. The network is not present or not started. »
  Thank you.

  I am able to fix this by myself.

  The solution that worked for me:
  Run as administrator command prompt.
  Insert the Windows XP Sp3 CD in disc drive (I have xp sp3 installed)
  
  At the command prompt, type in
  
  
  SFC/SCANNOW
  
  
  
  

• Fix it fails Center with the error: unable to get the catalog of the troubleshooter. Error MatsGetSapCatalog failed

  Original title: Fix it center fails.

  Difficulty Center fails with the error:
  Unable to get the catalog of the troubleshooter. Error MatsGetSapCatalog failed
  I can't find the url of re - download.
  It doesn't seem to be at the Download Center.
  Thank you
  Frank C

  Vista Ultimate 64 bit sp2

  

  CF. http://answers.microsoft.com/en-us/protect/forum/mse-protect_scanning/scanning-engine-has-stopped-responding/e0f84bec-2555-4279-bfb7-aff691b8ba8d

• Cannot install software HP7310 for Windows 7 - error: unable to extract the files

  Hello

  I want to reinstall the software for my Officejet HP7310 on my Windows 7 Ultimate 32 of company laptop computer bits.

  I download the software from HP.com site: AIO_CDB_Net_Full_Win_WW_130_141.exe.

  Try to install it, the extraction of files stops at about 88%. Error: Unable to extract the files.

  It seems that the 'Autorun.inf' file is blocked by the McAfee VirusScan Enterprise. McAfee Agent version 4.0.0.1494.

  Can someone help me?

  Thank you

  The problem is resolved. The file has been blocked by McAfee Virus scan.

  After the controls in the properties of McAfee, the problem could be solved.

• config file error could not open the file line column 0 0 onfig file error cannot open file row 0 column 0 - whenever I try to open my hp game console

  original title: config file error could not open the file column line 0 0

  onfig file error cannot open file row 0 column 0 - whenever I try to open my hp game console... I get this error message...

  Hello

  Was the HP works well before game console? If Yes, then do you remember any hardware/software changes, after which the problem started?

  Method 1: I would say you put the computer to boot and then check if the problem is caused by any third-party application.

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: I would say as you uninstall and reinstall the HP game console and check to see if it helps:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  You can also try posting your question in the HP Support forums.

  HP Support Forums - operating systems and software

  http://h30434.www3.HP.com/T5/desktop-operating-systems-and/BD-p/OSandSW

• Unable to open the zip file

  Music downloaded from Rhapsody to use on Windows Moviemaker. Unable to open the Zip file.

  Music downloaded from Rhapsody to use on Windows Moviemaker. Unable to open the Zip file.

  ==================================
  Open zip files is to open the folder and drag
  all of the content to another folder.

  And the following article might suddenly look:

  Windows Vista - compress and uncompress files (zip files)
  http://Windows.Microsoft.com/en-us/Windows-Vista/compress-and-uncompress-files-ZIP-files

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.