Error unsupported with checkboxes

Similar Questions

• ERROR unsupported CPU, motherboard s5610f H-apricot-RS780L-Μatx, AMD Phenom X 4 965 hdz965fbgmbox

  I have a slimline with card s5610f mother H-apricot-RS780L-Μatx, athlong X 2 250 3.00 GHz.

  BIOS Version 6.05 07/09/2010

  Basic version 08.00.16

  The HP Web site says I can update

  AMD Phenom II X 4 9xx /9xxe/8xx Quad-Core (core Deneb)

  So I tried AMD Phenom X 4 965 hdz965fbgmbox.

  As soon as voltage, the first message I get is "ERROR unsupported CPU...". The PC stops in 10 seconds.

  You have any suggestions.

  By Newegg.com sales information for AMD Phenom II X 4 965 Black Edition (HDZ965FBGMBOX), the power is 125 watts. As 125 watts is more than 95 watts max TDP of the motherboard, the AMD Phenom II X 4 965 Black Edition is not compatible with the card mother H-apricot-RS780L-Μatx.

• Whenever I try to play a Blu - Ray, I gett error "unsupported disk in the drive.

  Original title: cannot read Blu - Ray discs

  System specifications:

  Windows 7 Home Premium 64 Bit pack for system integrators, fresh and first time install on hard drive below.

  Power of 10 DVD standard. (Also have FLV player and installed AVG Free)

  ASUS black drive Blu - ray SATA model BR-04B2T<- this="" is="" the="" problem="" drive.="" i="" have="" already="" updated="" the="" drivers="" and="" firmware="" via="" the="" asus="">

  LITE-ON DVD/CD Writer black SATA model iHAS424-08

  OCZ Vertex Series OCZSSD2-1VTX60G 2.5 "60 GB SATA II MLC internal Solid State Drive (SSD)

  EVGA 121-BL-E756-TR LGA 1366 Intel X 58 Micro ATX Intel motherboard Micro SLI

  Intel Core i7 - 920 Bloomfield 2.66 GHz LGA 1366 130W Quad-Core Processor Model BX80601920

  EVGA GeForce GTX 285, 6 GB of Ram and a nice samsung screen.

  The ASUS drive has yet to play a disc on this particular machine. Whenever I try to play a Blu - Ray, I get the error "unsupported disk in the drive." I did the following:

  -J' tried Corel WinDVD 9 Plus, same error 'is Disc.... »

  -The works of car well on a machine I built with windows XP 32 bit SP2 and running an evaluation version of powerDVD 10. On the first blu - ray I've tried, he asked in what area I would set my player (a, B, C). I haven't seen such a screen on the above 64 bit computer, even after that fresh installs of windows 7 on the other drives.

  -The same error on a separate Win7x64 install on another drive hard, even computer. ASUS incredibly useless people say it works very well on a new installation of Win7x64.

  -Have done all the steps on this post: http://social.answers.microsoft.com/Forums/en-US/w7pictures/thread/a5bf1f3f-33c4-4502-ae2e-42cbd8f9d341

  -Following the steps on this link:http://support.microsoft.com/kb/929461

  As you can imagine, it is frustrating and draining. My skill level is high with the material, but I am really confused.

  I use PowerDVD 10 Standard, which is supposed to read blu - ray discs...

  Link n ° 1 says "hardware changes may not be detected!" after the execution. No change to playback of blu - ray, I always get this message from PowerDVD 10: "There is a disc with a format not supported in drive D:"

  Second link gave the final "could not identify the problem.

  The region settings tab does not appear when I go into Device Manager. I get general, Volumes and driver details.

  Bringing the window even for my second DVD drive (LITE-ON DVD/CD Writer black SATA model iHAS424-08) makes performance a DVD region. The region is set to 1, with 4 changes remaining. However, do not use blu - ray region #, they use region A, region b... no such parameter does not appear in any window of properties of material I have seen yet.

  The third link you posted also gave the same results: no DVD region setting is available for the reader that is supposed to read blu - ray discs.

  I had almost the same problem on almost the same system with almost the same software.

  * HP DC9700 desktop with BRD Lite-ON D-4B1S
  * Windows 7 Ultimate 64B
  * PowerDVD 10

  But together with ANYDVD HD (http://www.slysoft.com/en/anydvdhd.html)

  THIS MARKET!

  Try it!

• Help! Export error 27 with only a few videos

  I exported Final Cut Pro X projects directly on my external hard drive. I got an error 27 with one of them, and given that it is exported well I don't think it's a problem with my external hard drive formatting. All the videos have been imported in the same way and the same camera. Any ideas about why this is happening? Thank you!

  Most likely, you export a FAT32 / 'Windows' formatted the disk, right?

  error27 occurs when you attempt to save a file > 4 GB - that is not supported by fat32 (very old format..)

  So, small export projects, larger not. -.

  reformat the drive (erases all content!) to exFat or hfs + / "Mac"...

• receive the error message with every new open tab

  Whenever I open a new tab, I get a popup error message. I have screen shots that can be granted.

  At first, I thought it was a mistake to Java, but I've uninstalled and reinstalled Java.

  There are two error messages which read:

  [JavaScript application]
  evalInSandbox:Error: Permission denied for <https://facebook.com> create a wrapper for the object of class UnnamedClass.

  [JavaScript application]
  Error: Permission denied for <https://facebook.com> create a wrapper for the object of class UnnamedClass

  So I clicked on help > troubleshooting information and choose Reset Firefox.
  Now I get a new error message with every new tab open.

  [JavaScript application]
  Error: syntax error

  Please tell us how to do this.
  Thank you
  JudyLeeThurber

  1. In the address bar, type Subject: config and press enter. The subject: config "this might void your warranty!" warning page may appear.
  2. Click on I'll be careful, I promise!, to continue on the subject: config page.
  3. Type browser.newtab.url
  4. Double click on the first result, a new window should now display.
  5. Type of topic: newtab in the area.
  6. Click ok and load a new tab. It now works of mireille?

• I have Windows XP Media Center Edition Version 2002 with Service Pack 3 and I tried to run Media Center but I get an error message with ehshell.exe.

  original title: error with ehshell.exe

  I have Windows XP Media Center Edition Version 2002 with Service Pack 3 and I tried to run Media Center but I get an error message with ehshell.exe. Could you help me?

  This problem exists since the 1st Media Center. SP2 and SP3 had a difficulty, but it is obvious that it doesn't always. The same problem still exists in Vista today with a lot of other carried over from XP. System restore would work, but you do not have any good restore points so reinstall an operating system seems to be your only option.

  You probably don't want to do an OS reinstall you need for Media Center, but since it does not at all, you might want to play then remove the Media Center updates and or SP3 and reinstall them.

• error 80072F8F with windows updates.

  I run windows vista professional. have encountered error 80072F8F with windows updates. It also seems to have an impact on the renewal of McAfee. I'm not very wise computer & so very frustrated. McAfee has suggested that I have the problem of windows?

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80072F8F

  If Windows Update error 80072f8f during updates, date and time on your computer may not be identical to the date and time for the service online from Windows Update. Your computer and the service have no need to have an identical date and time, but if they vary too much it will prevent you from checking for updates.

  Make sure your internet box etc. is correct also.

  Read the entire article.

• X 230 error 1802 with the Correct WLAN card

  Recently, I ordered my brand new x 230 for the start of the University and selected the thought of WLAN card default option which would be sufficient for my needs. After the hand signal and dropouts, problems I decided to upgrade the WLAN card that would improve the signal strength.

  I know the existence of the 'white list' frustrating that means that some cards are allowed to use. So, I went in the store of Lenovo and looked for what was the best WLAN card that might come with a new order of a 230-System x, as surely they are on the whitelist.

  Later, I bought an Intel Centrino Ultimate - N 6300 card and installed correctly in my x 230. However, from the start I saw to my despair that the 1802 error was there, tells me my card has not been approved. Could someone explain how hell a card that can come already installed in x 230 is not did not whitelist checking?

  Needless to say I am not very satisfied with Lenovo, because I can't even find a list of what cards are accepted. What is the point in a white list anyway? I am a student trying to patch BIOS to remove it, but no one has yet done a patch.

  Why do I get an error 1802 with this card?
  Thank you.

  Hello and welcome,

  Doesn't have that 6300 come from the store of Lenovo, or from a vendor who said it was for a Lenovo laptop?

  The card type is not the whole story when comes to the white list.  In addition to the correct (6300) type by its PCI vendor and device ID, it must have an ID of subsystem of Lenovo.  (IIRC, it can be more precisely not the subsystem ID, but the effect is the same).  A generic 6300 will not work.

  A card must be sold by Lenovo or pass the white list.  Reputable suppliers will provide a number of Lenovo FRU (CRU) to check the FRU list for the machine.

  For example. Since the research database of Lenovo parts -> ThinkPad X 230page, the RUF for that 6300 is 60Y3233.  It was not easy to find.  The RUF are not in the hardware maintenance manual any more

  If your card has a number of Lenovo FRU, something else is in place.

  [edit] types andyP faster as I do...

  Z.

• I get this error message with my DVD player: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete."

  I get this error message with my DVD player: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete." I tried to reinstall the driver when the computer prompted me to do it, but there was an error with this as well. My computer will not all read the disks.

  Original title: Matshita DVD-R UJ 890

  Hi AJordanMiller,

  Try these methods.

  Method 1

  Run the fix - it from the link below.

  Hardware devices not detected or does not
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 2

  See the help article:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060

  Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  It will be useful.

• BlackBerry smartphones dreaded 0x3b21 error sync with Curve 8310 DM 4.7 on XP pro 3

  No joy with 4.7 DM to DM 4.6 (4.7 by the grip of way on the recording of "modules" when installing like 4.6 done so!)

  Here's the video:

  http://www.YouTube.com/watch?v=u6tS8vvokEM

  (I have many more like this for 4.6, the DM is facing problems in my humble OPINION)

  CK on:

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB01451&sliceId=SAL_Pub...

  (where is the Permanent URL of tracing?)

  I'm not alone in this struggle, so I hope that some will benefit from the demo above.

  I had no SUCCESS in sync my curve for more than two weeks... (I'm looking more to the Iphone and Android now).

  That said, I need of those in the know to decipher this cryptic message. In fact, I need a fix. Let someone else read this and tell me the solution or workaround.

  This is my journal of trace

  Mon Dec 15 20:36:59 2008 - Intellisync Log file.

  Mon Dec 15 20:36:59 2008: error loading system failed - {F64973FB-7CB0-460E-9DCC-36A023757617}.4151 a.\iluptbl.cpp line 245
  Mon Dec 15 20:37 2008: error loading system failed - {F64973FB-7CB0-460E-9DCC-36A023757617}.4151 a.\iluptbl.cpp line 245
  Mon Dec 15 20:37:03 2008: error 0 x 80040107-2147221241-2088370138 a.\olkfolders.cpp line 393
  Mon Dec 15 20:37:03 2008: error 0-2088370138 a.\olkfolders.cpp line 322
  Mon Dec 15 20:37:03 2008: error - 2088370138.0 at la.\OlkFolders.cpp line 152
  Mon Dec 15 20:37:03 2008: error 4237.4237 to la.\callback.cpp line 1103

  Landry says:

  I had the same error occur with DM 4.6 with my Curve 8310. I got the job of synchronization at the beginning, but it has stopped working shortly after. Once I made the debug log, I found the same error 0 x 80040107 a.\olkfolders.cpp. So I decided to create a new Outlook profile and switched DM to use instead and everything is good! Just to let you know, I couldn't even change the Configuration of the synchronization without seeing the error.

  I just got the phone recently so I guess while I was trying to understand the configuration that I had made a change somewhere in Outlook or DM and that caused the errors occur. DM uninstall and delete all settings are a complete waste of time.

  Create a new Outlook profile seems to be the fix for me. And like you, the uninstall has been a waste of time. Moreover, I had no joy with the edition of the Configuration of the synchronization without seeing the error.

• WINDOWS WITH OUTLOOK 13 8.1. MAIL server error RETURNED WITH MESSAGE 550.

  I USE WINDOWS 8.1 WITH OUTLOOK 13. MAIL server error RETURNED WITH MESSAGE 550. Please login to use this mail server. How can I do this?

  So that we can look into this further, please provide the affected email account and complements of NDR (or error), you received so that we can determine the cause of this problem. To do this, please follow the steps below:

  1 right click on the message to bounce on your Inbox.

  2 choose the option show message source on the menu drop-down. You will see a window containing the headers of e-mail messages and content.

  After doing so, to validate the source of the message with all components of the notification of non-delivery such as:

  > Final destination

  > Action

  > Status

  > Diagnostic code

• I created a form with checkboxes.  A question has two boxes for a 'yes' another being a 'no '.  I just want to be able to select a single box, but currently, I choose both

  I created a form with checkboxes, I have currently two checkboxes in a question that I wish I could only check a box and make it mandatory that should be checked only one box.  Currently, I am able to select the two check boxes.

  Give them the same field name, but export values.

• When downloading an app from the trial of creative cloud app error ocured with the message "Download appers corrupted.please try to download again(-60), please provide a guide step by step to solve this problem."

  When downloading an app from the trial of creative cloud app error ocured with the message "Download appers corrupted.please try to download again(-60), please provide a guide step by step to solve this problem."

  Contact adobe support using a Web browser that accepts cookies and allows pop up windows, click here and as soon as it is available, click "still need help," https://helpx.adobe.com/contact.html

• I installed my own copy of Lightroom 5 to 5.7. Now all files I try to develop gives me a message "there was an error working with this photo. What should I do?

  I installed my own copy of Lightroom 5 to 5.7. Now all files I try to develop gives me a message "there was an error working with this photo. What should I do?

  Thanks Tanuj

  My fault. I restarted my computer and everything is still OK

  Thanks again

  Paul

• When I try to publish, I get an error that says: "an unknown authentication error occurred with your AdobeID. (SHARED_UNKNOWN_ERROR)

  When I try to publish, I get an error that says: "an unknown authentication error occurred with your AdobeID. (SHARED_UNKNOWN_ERROR)

  You can try the solution in this discussion?

  An unknown authentication error occurred using your Adobe ID (AUTH_UNKNOWN_ERROR)