Error W700 and update system 4
Hello
Since a few weeks I got a message error when I trie to upadte my ThinkPad W700 with ThinkVantage System Update 4 tool.
I always an error message like "there is no module for your system. Before it works very fine tool (!)
Is that someone has a problem even with a W700 or another Lenovo computer?
Thank you
Regis
Try to uninstall and reinstall system update.
Tags: Lenovo Products
Similar Questions
-
QuickTime and iTunes will not update. I have windows xp and tried to update quicktime and iTunes. I don't seem to have any problems with iTunes, but it worries me that my computer won't up grade to iTunes 10.2. Even more troubling, is that iTunes can not be uninstalled. I get a message "iTunes old version cannot be deleted? Product iTunes error 1714 and 1613 system error or 1612 ". I tried to uninstall iTunes and get the same message. If iTunes won't uninstall there must be a problem. What should I do?
Hi Thomas.collins,Here are some articles that might help you: -
Update Vista error 80070507 and peripheral system that does not work
Title: updates Windows Vista installs not because of error 80070507 and there is a system feature that does not work, but I don't know that that or how to fix it.
Windows Vista updates do not install due to error 80070507. He also seems to be a problem with a device in the system does not and I do not know that who or how to fix it. Had to do a system restore not so long ago and I've had problems since. Help, please.
Hello
-You are aware of any changes made on the computer before this problem?Perform the steps from the link below and check if the problem persists.Problems with installing updatesHope this information helps. -
I just changed my hard drive, stuck in a windows 7 cd, successfully installed. Chrome, dropbox and update system installed. Ran Lenovo update system and at one point the computer restarted itself, made three loud beeps (long followed by two short) and that's it.
The bluetooth led is on, as it is powered, battery and charger lamps. The screen is dead.
That's happened? What are these three beeps? What should I do?
It turns out that my new HDD is loose. Something must be done to ensure that it does not move.
It was a scary time.
-
Everything worked fine on my PC. Then the other day, he crashed and said there is a disk error and to analyze the entire disk to find the error. He finished scanning, but windows 8.1 would charge not successfully. This is why I made an update of the system through HP recovery. After having done that, windows should start normally, but I lost my activation. When I tried to activate the answer has been ' key does not work try again later "or something like that. Kept by train, no luck. I thought it might have been an error with the update system, so I did the total system reset (after registration of personal data). Now, I have the same problem with the activation and if I try to navigate in the normal way to activating the screen, the screen disappears. I can get to the activation by using the command line. but the key still does not work. The key that I use I extract from my BIOS data. Also, I ran the update and reset to the original hard disk partition.
I hope someone has a solution to this. Thanks advanced
Bill
Hello @beekster,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.
I read your post on how your desktop computer will not activate after a system refresh, and I would be happy to help you in this case!
To fix this problem, I suggest following the procedure described in this resource on the activation of Windows 8 product, which should help to activate Windows 8.1 on your system.
Please re-post with the results of your troubleshooting, and I look forward to your response!
Concerning
-
I changed my apartment av 11/5/09 and turned on Windows Defender because it was not find cookies to follow up on my system. I also installed an add-on for Iex 8.0 two days ago that I must not turn on InPrivate browsing software each session. I have run scans and run Mrt.exe and found without spyware or virus. I ran the event viewer, and there are problems, especially errors on start-up and shutdown delays and the fact that the security guard verification Center to see if I have an AV program installed. But when I go into Security Center it tells me that my
AV program is norton and my anti-spyware program is Norton and my system is all green lights. Norton has found 40 + tracking cookies. I have
delete cookies in Internet Iexplorer, individually, but not on a large scale.
That's all the news I can think are relevant-thanks in advance!Redshift905,
If you know if you're missing the updates? Usually if you run Windows Update and it says that your system is up to date so that means that he has not found the updates apply to your system. If you think that you get the updates, then you can reset Windows Update components and test again. Here is a link with instructions if you want to do.Reset the Windows Update components
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
I did not install the updates of the system since May 31, get a code error 80070641 and 641
I get an error 80070641 and 641 code. When I look in my install/uninstall list, I can't find Windows Installer
Hi Klaus,
Have Q: you used any sort of registry cleaner/tuner-top/tweaker?
If you have, that is why the installation service is 'away' {a registry entry is missing, even if the Setup is still really on your system}.
See my answer marked as answer here http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/i-cannot-download-the-new-updates-from-may-8-2012/b9b4a982-5b4d-4218-8a47-917515ede136
Please inform about the results.
~ Maurice
-
I'm trying to update to CC (2014) and get this message: 'failed to install. Setup has encountered an error. Restart your system and try again. (15) I did the reboot, the same problem.
Help!
I solved this problem by replacing the applications folder and the Adobe folder in the library - folder of Application support with the files from before the last update of Mavericks using Time machine.
It worked for me.
-
We bought my son an ACER laptop in May this year (2014) as a birthday present and (hopefull) for useUniversity (he won a place).Yesterday, the laptop has stopped working and just turned off.We took it back to the Currys PC World store (2222 Liverpool Aintree Branch) to fix them.They decided that it was not a warranty issue and that: - (I quote)"The fault details: updates Windows has corrupted operating system." "Needs a remastering and updates the resettlement".I have this in writing.It cost my son, a student, £50 and is without his laptop when it nears its first round of reviews.I need your answer before deciding on my next step.We bought my son an ACER laptop in May this year (2014) as a birthday present and (hopefull) for useUniversity (he did win a place)... Yesterday, the laptop has stopped working and just turned off.
Buy you a Windows XP computer brand new in May of 2014, is that correct?
-
I have a very new computer with Windows 7 Professional, and two weeks ago, he had a critical update. Since then, McAfee has had problems. I corrected McAfee, but yesterday, when I turned on the computer, I received a message that my windows is not genuine. I accidentally clicked Ignore (or activate later) button instead of the activation button. Now none of the software or applications to work and I can't get the computer to any previous dates because of the message: file or directory is corrupted and unreadable 0 x 80070570.
I checked today and my Windows 7 is genuine.
Many updates Microsoft Office cannot run also, since that time.
How I fixed the 0 x error 80070570 and requests 0xc0000006 error?
How I fixed the 0 x error 80070570 and requests 0xc0000006 error?
Buy a new HARD drive . Your HARD drive is dying:
//
MessageId: STATUS_IN_PAGE_ERROR
//
MessageText:
//
The instruction at 0 x %p memory referenced to 0 x % the required data has not been placed in memory due to a State of error / 0 x %x.
//
#define STATUS_IN_PAGE_ERROR ((NTSTATUS)0xC0000006 L)Windows cannot read data from the HARD drive, that's why you got the errors.
André
"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
Error update system of Lenovo y550p
I installed the Lenovo system update program. But I get error on 27% when I run an update. It says "Error 76 from the center of update system".
If anyone knows, please help.
on the Security tab
Right click > properties and are, of course, it is write.
-
I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.
Hi Happyrockgeek,
Welcome to Microsoft Windows 7 answers Forum!
This problem occurs if the Windows security .dll files are incorrectly registered.
To resolve this problem, you can perform the two methods of troubleshooting, check if the problem is resolved.
Method 1:
Run (Checksur.exe) system update readiness tool.
To do this, follow these steps:
1. download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:
http://support.Microsoft.com/default.aspx/KB/947821
2. try to install the updates again.
Methods 2.
Reset the Windows Update components.
1. to reset the Windows Update components automatically, click the fix button in the link below.
http://support.Microsoft.com/kb/971058
2. click run in the file download dialog box and follow the steps described in the fix it Wizard.I also suggest you to install the latest version of Windows Installer 4.5.
Follow the link below to download:
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en
and you can also try to install after you turn off the firewall.
It will be useful.
Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum.
-
Get the error 800b0100 and 8007065E on two updates failed...
.. and the system preparation tool I have download did nothing to remedy. The updates are:
Microsoft.NET Framework 3.5 SP1 for Windows 7 and Windows Server Update...
Update security for Windows 7 for x 64-based systems (KB2347290)
I'm having trouble with this. Is there a way to fix what I can understand, some of these fixes are so complicated and and beyond my skill level.
Thanks for any help!
Please check the link for the error 800b0100
-
2 UPDATES are constantly down since 12/16/10 Update: update of security for Microsoft Works 9 (KB2431831) and update of security for Microsoft Office System 2007 (KB2288931). I tried to REINSTALL... and CONTINUED on for more than a week now with no result. I don't get the error messages or codes, so I'm not sure what to do! They are considered IMPORTANT so I guess that I need these updates and I TRIED to REBOOT after updates with NO RESULTS as well. (I am running Windows Version 6.0 with Service Pack 2) The 2 latest updates only "UPDATED successfully", before the long chain UPDATES failed, which began on 12/16/2010 (as previously mentioned) were: update for Internet Explorer for Windows Vista (KB2467659) and Security Update for Windows Vista (KB2305420) someone knows what do to update failed? Any help would be most appreciated. Thank you. {By the way... I use my computer for use at home or school.} Thank you.
This might be relevant: http://support.microsoft.com/kb/2258121 TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.
-
Windows Update error 80072efd and 0x80072efd code codes.
I have Windows Vista and my system will not allow me to do my Windows updates in Windows and Windows defender. I have error code 80072efd and 0x80072efd. I looked everywhere to help solve this problem. Pls help me to solve this problem I tried everything.
Hello
You should not have two large even antivirus programs on the same computer, much less running. Then
You must uninstall AVG, or McAfee. Please use the removal tool for the one that you want to uninstall.
If you just uninstall it without the removal tool, they will leave problem causing remains.Download - SAVE - go where you put it - right click-RUN AS ADMIN-restart when full.
AVG Remover Tool (avgremover.exe; avgremoverx64.exe)
http://www.Avg.com/us-en/download-toolsMcAfee removal tool
http://service.McAfee.com/FAQDocument.aspx?ID=TS100507SuperAntiSpyware could have a role as well, it loads several pieces memory-resident.
Rob - bicycle - Mark Twain said it is good.
Maybe you are looking for
-
Why am I not able to see the whole story?
Hello, when I click on history, anything not recent comes? I see the story of how at the time where my daughter has also used the same laptop? IM ignorant regarding the settings, programs, etc... However, I have read some tips on your page and hope y
-
Portege R500 with 3G - Instructions for the insertion of the SIM card
I have a model PPR50E R500 which I think has built in 3G. Howevere I can't find documentation on how to insert a SIM card. One of the other model seems to suggest that the SIM card is inserted behind the keyboard. Can someone point me to some trainin
-
Original title: problem in installing FSRM We are trying to install FSRM (File Server Resource Manager) in windows server 2 k 3 R2 SP2. After installation, open the FSRM in "All programs", its error message that gives as no network device connected.
-
Unrecognized command-line control internal/external errors
First of all, for anyone who believes, it's a problem of environment path. All orders are in the path. The problem is that the command line requires the full extension to type to work rather than simply the name of the executable. Here is an example:
-
BlackBerry Smartphones get photo off BlackBerry
Hello. I have a BB Curve 8300. I installed a multimedia card in it. I have a Mac. I have a cable connecting my BB back my Mac. I am able to see all the photos I have taken on the BB very well. However, when I install the cable on my Mac, and I watch