Error when inserting in dynamically created filename-file

Similar Questions

• Problems of conversion of PDF to MS Word document.  I managed to convert 4 files and now the subsequent files generate a "Conversion failed" error when you try to convert the file.  I have a big manuscript and I separated each chapter to assist with co

  Problems of conversion of PDF to MS Word document.  I managed to convert 4 files and now the subsequent files generate a "Conversion failed" error when you try to convert the file.  I have a big manuscript and I separated each chapter to help the conversion; as I said, the first 4 pieces without problem, then the conversion failure.  I tried to convert the document integer and same result.  Specifically, I bought the feature export to Word.  Please help.  I had initially export the Word Perfect PDF document and attempting to pass PDF to MS Word.

  Hi sdr2014,

  I'm sorry to hear that your conversion process is at a standstill. It seems that the problem is not specific to a single file, you have been unable to convert anything, since the first four chapters of a correct conversion.

  So, let's try this:

  If you want to convert via the ExportPDF site, please sign out, clear the browser cache, and then reconnect. If you use the drive, please choose Help > updates to ensure that you have installed the latest version.

  Please let us know how it goes.

  Best,

  Sara

• ORA-20100: error: failure FND_FILE. Cannot create the file

  Hi all
  Simultaneous application of Bellow error
  
  We using ORACLE 10 g. R12
  OS: RHEL 4.4 (LINUX)
  
  
  
  
  
  ---------------------------------------------------------------------------
  Execution of the expedition: Version: 12.0.0
  
  Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
  
  Module WSHINTERFACES: Interface travel Stop - SRS
  ---------------------------------------------------------------------------
  
  Current system time is January 27, 2013 09:58:58
  
  ---------------------------------------------------------------------------
  
  * Starts * January 27, 2013 09:58:58
  Error ORACLE 20100 in FDPSTP
  
  Cause: FDPSTP failed due to the ORA-20100: error: failure FND_FILE. Cannot create the file, l0633393.tmp in the directory/usr/tmp.
  You can find more information in the applications log.
  ORA-06512: at the 'APPS '. FND_FILE', line 554
  ORA-06
  ---------------------------------------------------------------------------
  Beginning of the FND_FILE log messages
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  End of the FND_FILE log messages
  ---------------------------------------------------------------------------
  
  
  ---------------------------------------------------------------------------
  Options, AutoComplete, the request for enforcement.
  
  
  End of query options AutoComplete.
  
  ---------------------------------------------------------------------------
  Simultaneous request ended
  Current system time is January 27, 2013 09:58:58
  
  ---------------------------------------------------------------------------

  This issue is related to the Oracle EBS, mark it as here the answer and open it

  Oracle Discussion forums' E-Business Suite

• error when inserting the values too much or miss comma

  Hai All
  
  during the insertion, I got an error when inserting
  
  I have a table called T1 and declared as date I need to insert the current date and time in this column
  
  
  So I converted a varchar column and concat with time and iam trying to insert when inserting I got error
  
  
  insert into dail_att (respondent) values (to_date (to_char (attend_date, 'ddmmyyyy') |)) ("0815',"ddmmyyyy hh24");
  
  
  Concerning
  
  Srikkanth.M

  Hello
  Please let us know

  Desc dail_att;
  

  and the sample values in

  attend_date
  

  (There is also a ')' missing in your SQL, correct SQL would be

  INSERT INTO DAIL_ATT
              (INTIME
              )
       VALUES (TO_DATE (TO_CHAR (ATTEND_DATE, 'ddmmyyyy') || '0815',
                        'ddmmyyyy hh24'
                       )
              );
  

  * 009 *.

  Published by: 009 on March 18, 2010 21:23

• Error when inserting XML file into a table in Oracle10g

  Hi team,
  
  I'm trying to insert an xml file into an Oracle 10g XMLType table. During the insertion, I get following error:
  
  ERROR on line 1:
  ORA-22285: non-existent directory or file for FILEOPEN operation
  ORA-06512: at "SYS." DBMS_LOB", line 523
  ORA-06512: at "SYS." XMLTYPE", line 287
  ORA-06512: at line 1
  
  I did following steps.
  
  (1) create the DIRECTORY xml_dir as 'c:\xmldata ';
  
  (2) create table xmltab XMLType;
  
  The following packages are executed by schema 'Sys '.
  
  (1) dbmslob. SQL;
  (2) prvtlob. PLB;
  
  A xmldata folder is created under "c:\". "and with data_file.xml file is stored in it.
  
  After Insert stmt is executed that returns gives above error.
  
  Insert in xmltab values (XMLType (bfilename('xml_dir','data_file.xml'), nls_charset_id ('AL32UTF8')))
  
  
  Can you please give me a solution. It is very urgent.
  
  Thanks in advance.
  
  Kind regards
  Murielle

  After selecting the data in table xmltab I just got first line of the file xmldata. That is to say
  http://baro

  This must be a display problem.
  What client tool are you using and what version?

  If SQL * Plus, you won't see all content unless you set some options:
  {code}
  LONG VALUE
  SET LONGCHUNKSIZE
  {code}

  Could you try the following?
  {code}
  THE VALUE OF 10000 LONG

  SELECT t.object_value.getclobval () IN xmltab t;

  -to force printing:
  SELECT extract (t.object_value, ' / *'). getclobval() xmltab t;
  {code}

  Published by: odie_63 on 16 Feb. 2011 08:58

• Error when inserting Blob by stored procedure

  Hi there and thank you for your time,.
  
  I am running a console application in .NET which resembles a particular file on my hard drive, runs through all files, captures the content via a FileStream, the type (by checking the registry), the name and a foreign key which he rises before insertion. This is my code:
  
  public void Insert (MyFileModel file) information gathered by the System.IO.FileInfo object //contains
  {
  Con OracleConnection = new OracleConnection (System.Configuration.ConfigurationManager.ConnectionStrings ["Oracle"]. ConnectionString);
  con. Open();
  OracleCommand cmd = new OracleCommand();
  cmd.CommandText = INSERT_FILE;
  cmd.CommandType = CommandType.StoredProcedure;
  cmd. Connection = con;
  cmd. Parameters.Add (": p_in_file_contents", OracleDbType.Blob);
  cmd. Parameters.Add (": p_in_filename", OracleDbType.Varchar2);
  cmd. Parameters.Add (": p_in_item_num", OracleDbType.Int32);
  cmd. Parameters.Add (": p_in_file_content_type", OracleDbType.Varchar2);
  cmd parameters [0]. Value = file. FileContents; Byte [], populated from a file stream
  cmd parameters [1]. Value = file. File name; string
  cmd parameters [2]. Value = file. ItemNum; int?
  cmd parameters [3]. Value = file. FileContentType; string
  cmd ExecuteNonQuery());
  con. Close();
  con. Dispose();
  }
  
  INSERT_FILE (part of a set with the other working procedures) are:
  
  PROCEDURE INSERT_FILE (p_in_file_contents IN p_in_file_content_type IN varchar2, p_in_item_num in numbers, p_in_filename IN varchar2, blob)
  
  IS
  
  BEGIN
  
  INSERT INTO mytable
  (FILE_CONTENTS, FILENAME, CREATE_DATE, ITEM_NUM, IS_DELETED, FILE_CONTENT_TYPE)
  VALUES
  (p_in_file_contents, p_in_filename, SYSDATE, p_in_item_num, 0, p_in_file_content_type);
  
  END INSERT_FILE;
  
  Here's the code LOB on the table. I do not change no matter what this code, is any of the default:
  
  (STORE AS) LOB (FILE_CONTENTS)
  TABLESPACE RECENTES5
  ALLOW ONLINE STORAGE
  CHUNK 32768
  RETENTION
  NOCACHE
  NOLOGGING
  INDEX)
  TABLESPACE RECENTES5
  STORAGE)
  INITIAL OF 160K
  ACCORDING TO 1 M
  MINEXTENTS 1
  MAXEXTENTS UNLIMITED
  PCTINCREASE 0
  DEFAULT USER_TABLES
  ))
  STORAGE)
  INITIAL OF 160K
  ACCORDING TO 1 M
  MINEXTENTS 1
  MAXEXTENTS UNLIMITED
  PCTINCREASE 0
  DEFAULT USER_TABLES
  ))
  TABLESPACE RECENTES5
  PCTUSED 0
  PCTFREE 10
  INITRANS 1
  MAXTRANS 255
  STORAGE)
  INITIAL OF 160K
  ACCORDING TO 1 M
  MINEXTENTS 1
  MAXEXTENTS UNLIMITED
  PCTINCREASE 0
  DEFAULT USER_TABLES
  )
  NOLOGGING
  NOCOMPRESS
  NOCACHE
  NOPARALLEL
  MONITORING;
  
  This code works fine for all the files and all types (stores and retrieves the document in my web application), with the exception of files whose size is between 32768 and 65535 (2 ^ 15 and 2 ^ 16). On the files that are the size, this error is returned to the insertion:
  
  ORA-01460: dead letter or unreasonable conversion requested
  
  My version 11.1.0.6.0 Oracle Client is installed and the version of the Oracle.DataAccess.dll is 2.111.6.0. I know that this is not the latest version of the software, but software installation is difficult in my organization that we do not have admin privlidges. The .NET web application and this particular application is a 4.0 application web.
  
  I use a similar code of an MVC web application that sees the same results when the files came from an object HttpFileCollectionBase (Request.Files).
  
  What Miss me the code ODP.NET? My table should setting?
  
  Thank you very much for your time and help me with this!
  
  -Sean

  Suggestions for your ODP.NET code.
  1.
  using Oracle.DataAccess.Types;
  ...
  OracleBlob myBlob = new OracleBlob (con);
  myBlob.Write (Mon_tableau_octets, 0, count); where Mon_tableau_octets is filled by a file stream and count is the number of bytes to write to myBlob
  cmd parameters [0]. Value = myBlob;
  ...

  2. don't check that when he is not null, then have blob object, command object and a connection object. (No need to close the connection before eliminating)
  It is not relevant to the question.

  Edited by: shsu January 12, 2012 16:16

• Version of Photoshop elements Windows 14 - error when you try to create a Photomerge Panorama "documents must be registered before they can be merged. I tried a few of the fixes mentioned in these forums such as Edit-> Preferences-> general-> res

  We know the fix for the bug "documents must be registered before they can be merged" when you try to create a Photomerge Panorama in PSE 14?

  I think I have found workarounds to the question "documents must be registered before they can be merged" (no thank you lack of Adobe customer support):

  Solution #1

  My workflow template is to take pictures with my SLR and save on the memory in the form of RAW files, download the images on my PC, then open the RAW files in Adobe Camera Raw and then save the images to jpeg using PSE. I wasn't able to create Photomerge Panorama with jpeg images I've saved, but I was able to create Photomerge Panorama with the images I have saved IF I save as TIFF 8-bit files in EPS. A condition for this workaround was that I had to save the pictures at their original resolution and not at a reduced resolution.

  Solution #2

  If I have a right-click on an image and selected open with 14 and observed PES Editor (RGB/8) * to the right of the file changes its name, which means PSE think he has not saved to the file. The solution is to go to file-> Save-> Save (replace existing file-Yes)-> OK. You can then use this file and others you perform the same steps to create a Photomerge Panorama.

  Solution #3

  The way to save JPEG files in PSE is to go to file-> save for Web-> Save-> Save. The workaround is to select the file-> save for the Web and then check the box include the color profile , then click on save and then save again. Then I'm able to merge JPEG files using Photomerge Panorama and I don't get the error message "Documents must be registered before they can be merged". I looked back 11 of PSE that is still on my PC and found that the Embed checkbox color profile did NOT have to be checked to get Photomerge to work for jpeg files. So it appears with PSE 14 Adobe changed the Photomerge Panorama script to require the image file the color profile embedded in the image. If the color profile is not embedded, PSE think the image file has unsaved changes. BTW, this bug, or "feature" has not changed with PSE 14.1.

• Error when you try to create the Contact form PSE13

  I get two error messages when you try to create a contact sheet

  "The operation could not be completed. The file or directory is not found. »

  then

  "Could not complete the command II Board contact because of a program error"

  I'm on iMac OSX Yosemite 10.10.2

  Updated for PSE12 when PSE13 is released

  No problems with PSE12

  If you go to

  (user) Library\Preferences\Adobe\Plugins\Adobe Board Contact II PSE12\Elements

  and remove the

  Adobe Board Contact PSE12 Pref.

  
  

  If all goes well, you should be able to use the plugin Contact Sheet II again.

  To view your library, the user in the menu go to the Finder press the Option key, then you should see library listed in the menu to reach.

• Dynamically create a file using the variable

  HI, I am facing a problem in creating file on the time of execution using the variable.
  I have a variable file name. In the tab refresh, I wrote a query SELECT TO_CHAR (SYSDATE, 'YYYY, MM, DD') | 'TEST' FOR DOUBLE. I tested the variable and its value is correct.
  
  I've created an interface allowing to extract the data in the table and store it in the file. I assigned the variable file name in the file.
  
  Now when I run the interface... the file is created, but the header is created in different file and its name is ambiguous, g (19) and the data are placed in the other file with the name that matches the value of the variable filename...
  
  It is two ODI creates two files a single header and other data...
  
  When I run my interface in a package of the file created perfectly... but one i want to use package I want to create a file via the interface only running

  What is the name of the second file? (the file that does not have the name of the variable)

• Satellite U205-S5034 - error when you try to create the recovery disks

  Hello world

  I have problems with the TOSHIBA recovery disk creator. When you try to create the recovery disks this error pops up:
  An unexpected error has occurred. Exit this application and start it again. (Error code: F1-0F00FE-00000002)

  The machine is a Satellite U205-S5034 under XP Pro SP3.

  Any help will be greatly appreciated. Thank you and have a nice day.

  DaveMatt44

  Hello

  What kind of DVD that you use to create a Toshiba Recovery disk? I have tried Verbatim DVD-R and TDK DVD-R and never had a problem with these discs. A friend tried DVD + R and he couldn t create a recovery disk. After he tried DVD-R and everything was fine but I do not know why this happened.
  So please try other discs.

  Also, check the Toshiba page for an update of the firmware of the CD/DVD drive. Maybe it will help you.

• Microsoft Visual C++ Runtime Library Runtime Error when I try to open PDF files

  Original title: Microsoft Visual C++ runtime error

  I get a Microsoft Visual C++ Runtime Library Runtime Error when I try to open the PDF files. I tried to locate this application in C:\program may explorer\iexplore.ex but cannot locate. How to solve this problem?

  This error started only last month. When I try to open sites that have PDF files, he flashes a warning and then goes in a loop, try to restore. How to fix this error?

  Hi Brent,

  1. is the specific question for PDF files?

  2. have you made any recent hardware or exchange of software on your computer before the show?

  3. which PDF file you are trying to open?

  Please follow the methods:

  Method 1:

  You need perform a clean boot to prevent any third party conflicting application to interfere with the computer.

  To put the computer in a clean boot State, you must follow the steps in the article mentioned below and check with the question.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: You must follow step 4 of the article mentioned above to recover the computer to Normal startup after you complete all the steps.

  Method 2:

  To repair Microsoft Visual C++ Runtime Library Runtime Error:

  a. Quit all programs. It is Internet Explorer.

  b. click on the "Start" button on the lower left side of the screen. On the start menu, select "run".
  c. in the window "Run", type "inetcpl.cpl."

  d. in the window "Internet Options", select the "Advanced" tab Under "Reset Internet Explorer settings" section, click "Reset".

  e. click 'Close' in the window "Reset Internet Explorer settings" that appears.

  I hope this helps.

• Error - when you try to delete a file and re - install a program

  Can someone help me pls? A program has stopped working for me, so I tried to remove and reinstall and I'm having no luck.

  I don't see any more on Add/Remove Programs, but when I look under C/program files, I still see the folder here. When I try to delete the folder, I get an error ' cannot delete r2.bmp: data error (cyclic redundancy check). "

  When you try to download this same program again, it says "Setup encountered a disk write error. Please ensure that all other applications are closed before starting the installation. In addition, ensure that the destination drive has enough space and that you have the necessary access rights. "For starters, I havve nothing else open. Shows user accounts I have "administrator rights."

  I'm stuck here, without being able to delete the folder or download again. I'm new to computers (wish I knew more). I watched how do I know which system I have and I have XP.

  Can any of you help me pls?

  Cyclic Redundancy Check (CRC) errors are usually associated with the hard disk errors.  The best first approach to solve this problem is to do a complete check of the disk.  The short version of the procedure to follow is:
  Under "My Computer", right click on the C drive :-> properties-> tools (tab)-> 'Check now'
  Check out the options and 'Start '.  He will complain that it cannot do it now and tell you that it will do so at the next startup.  Accept the warning.
  Restart your computer and let it complete the disk check.

  More info is here:
  "How to perform disk error in Windows XP check"
     <>http://support.Microsoft.com/kb/315265 >

  WARNING: This control is performed before Windows starts, can take two hours or more and can not be interrupted.  Do it when you won't need your computer for awhile.  Also, it would be prudent to update your backups before the race.

  HTH,
  JW

• Windows Media Player error when you try to read the file: error downloading codec

  Yesterday, I got no sound and video, today I have sound but no video.  What is happening with this?

  I updated my drivers and now the video does not work.  I use Windows Media Player c. 9.00.00.4510.  When I click on read the file, in the black bar at the bottom ready it flashes very fast "error downloading codec".  Before I updated the drivers, I got the video with no sound.  Where this codec disappeared to?   How can I get that back?

  I have updates for the 9 Series Player and I'm happy with it.  If I move up to 10 or 11, codecs and drivers will work with it automatically or will I have the same problem?

  OS: Windows XP sp3

  Thanks for any help, Cdee.

  Hi CDEKV,

  Check to see if the following is useful.

  Method 1: Follow the steps in the below article mentioned to see if it helps.

  How to Download Codecs automatically in Windows Media for Windows XP player

  Method 2: Install the Codec Installation Package to check the issue.

  Download details: Codec Installation Package

  Method 3: Upgrade to the latest version of Media Player.

  Download Windows Media Player - Microsoft Windows

• I get this error when I try to open a file with Acrobat Reader, it is said: Adobe Reader could not open "heels 2014 001.bmp" because it is not a type of file supported or because the file has been damaged (for example: it is sent as an email to)

  I get an error msg when I try to open a file using adobe reader software.  Error States: Adobe Reader could not open ' heels 2014 001.exe bmp because it is not a supported type, file or because the file has been damaged (for example: he was sent as an attachment to e-mail and has not been decoded correctly.).

  
  

  I tried to send an email with attachments 44 and would not send the email. Ever since I tried to send this e-mail, I have been doing the error msg.

  
  

  Anyone know how I can get this to work for me again?

  
  

  Thank you, any help is greatly appreciated.

  
  

  JoJo

  The file you are trying to open is (you can see from the name) a BMP, PDF files no file. Adobe Reader can only open PDF files, just so stop trying to open it with Adobe Reader. The app, users of Windows for BMP files is painting.

• Get this error when you perform a place with file oam

  I get the following error when downloading a file OAM: muse_manifest.xml. try again latter.

  Also is there a better way to get the videos to play in the muse?

  Anyone know what this means?

  Thank you.

  Joe

  I have the screenshot of the exact error?

  Also the videos you can find this useful widget: Adobe Muse HTML5 video Player Widget | MuseThemes.com Details: Adobe Muse Widget | Customizable HTML5 video player