Error when using INSTR function CURRENTMEMBER property

Similar Questions

• dbms_crypto - avoid error when using different key in lower environment

  Hello Experts,
  
  We use Oracle 11.2.0.2. We intend to implement dbms_crypto to encrypt some columns. Clone us the production data at the lower environment (DEV, QC).
  
  The lowest environments, we do not want to obtain the sensitive data from production and do not plan to use the same key. Instead of getting an error when using different keys, is it possible to get a different set of results.
  
  In other words, we want the implementation will be same in environments but use a different key in lower environment and obtain different results (or garbage).
  
  Any suggestions would be greatly appreciated.
  
  The test of this logic, I get following error when using the different keys to decrypt. It works fine if I use the same key.
  Error on line 1
  ORA-28817: PL/SQL function has returned an error.
  ORA-06512: at "SYS." DBMS_CRYPTO_FFI', line 67
  ORA-06512: at "SYS." DBMS_CRYPTO", line 44
  ORA-06512: at line 19
  

  DECLARE
    l_credit_card_no    VARCHAR2(19) := '1234 5678 9012 3456';
    l_ccn_raw           RAW(128) := UTL_RAW.cast_to_raw(l_credit_card_no);
   
   l_key               RAW(128) := UTL_RAW.cast_to_raw('abcdefgh');
     l2_key               RAW(128) := UTL_RAW.cast_to_raw('12345678');
  
    l_encrypted_raw     RAW(2048);
    l_decrypted_raw     RAW(2048);
  BEGIN
    DBMS_OUTPUT.put_line('Original  : ' || l_credit_card_no);
  
    l_encrypted_raw := DBMS_CRYPTO.encrypt(src => l_ccn_raw, 
                                           typ => DBMS_CRYPTO.des_cbc_pkcs5, 
                                           key => l_key);
  
    DBMS_OUTPUT.put_line('Encrypted : ' || RAWTOHEX(UTL_RAW.cast_to_raw(l_encrypted_raw)));
  
    l_decrypted_raw := DBMS_CRYPTO.decrypt(src => l_encrypted_raw, 
                                           typ => DBMS_CRYPTO.des_cbc_pkcs5, 
                                           key => l2_key); --**Using different key to decrypt
  
    DBMS_OUTPUT.put_line('Decrypted : ' || UTL_RAW.cast_to_varchar2(l_decrypted_raw));
  END;

  Thank you.

  In general, you can't get different results in different environments, no.

  Of course, you could write your routine to decrypt so that it intercepts it and returns a random string of RAW.

  However, this is not normally the way people go on hiding sensitive data in environments below. It would be much more common to use a tool that is designed for this tool. For example, Oracle has a Pack of masking of data for Enterprise Manager that allows to replace sensitive data with false, but realistic data as part of the updating of the environments below. There are also data from third-party tools like masqueur datamasking.

  Justin

• Receive the 25 (Null) error when using Flightsimulator FSX

  Receive the 25 (Null) error when using Flightsimulator FSX

  Hello

  Try to open the it to start - all programs - Games - Games Explorer, and then clicking the icon FSX.

  A disk error of 25 means that the program cannot read your disk reading.  Either the disc is scratch, dirty or defective.  If you need another drive, or you can try it on another computer. The message of Visual elements of Vista is not serious.  Vista will automatically your screen to a basic compatible mode when the application is launched.  However, it seems that your game is a failure due to the disk error and not the Vista display problem. Try to clean the disc and see if that helps.

  Last resort, it seems you'd have to do a complete uninstall and reinstall FSX.

  Cheers!

• Error when using the no_lig function in forms6i

  Oracle forms6i
  
  Hai
  
  When you use the function num row in my forms, I got an error.
  
  My code is
  
  declare
  pin_no varchar2 (16);
  date of pin_date;
  pin_time varchar2 (25);
  Ilan varchar2 (200);
  m_file TEXT_IO. TYPE_DE_FICHIER;
  m_file_path varchar2 (100): =: global.filename;
  number of line_count;
  M_BARCODE VARCHAR2 (16);
  DATE OF M_BARDATE;
  M_BARTIME varchar2 (25);
  Number of M_No;
  Cursor c1 is
  Select the code bars, bardate, bartime,
  ROW_NUMBER() (partition by bartime barcode order): nurse - the error on this line
  of temp_attendance
  Group of barcodes, bardate, bartime
  order by bardate;
  Start
  If m_file_path is not null then
  m_file: = TEXT_IO.fopen (m_file_path, 'r');
  -ELIMINATION OF temp_attendance;
  Loop
  Start
  TEXT_IO.get_line (m_file, Mstr);
  MSTR: = ltrim (rtrim (mstr));
  M_barcode: = substr (mstr, 1, 16);
  M_bardate: is to_date (substr (mstr, 17, 8), ' DD/MM/YYYY');.
  M_bartime: = (substr (mstr, 25, 4));
  
  INSERT INTO temp_attendance (BARCODE, BARDATE, BARTIME, RN) VALUES(M_BARCODE,M_BARDATE,M_BARTIME,M_No);
  Exception
  When no_data_found then
  TEXT_IO.fclose (m_file);
  "exit";
  End;
  End loop;
  go_block ('TEST_MS1');
  clear_block (no_validate);
  To r1 c1 loop
  : bar code: = r1.barcode;
  : bardate: = r1.bardate;
  : bartime: = r1.bartime;
  next_Record;
  end loop;
  premier_enregistrement;
  end if;
  exception
  while others then
  forms_ddl ('ROLLBACK');
  message (sqlerrm);
  end;
  
  Thanks and greetings
  
  Srikkanth.M

  6i u cannot use this type of analytical functions... motor of PL/SQL forms 6i is 8.0

  Bangoura
  [My Oracle Blog | http://baigsorcl.blogspot.com/]

• Get the error when using the UTL_SMTP function in Oracle 11 g

  Hello

  I get the error when executing a trigger e-mail code in oracle 11 g:

  I have following trigger on the temporary table:

  CREATE OR REPLACE TRIGGER temp_temp_message AFTER

  INSERT OR UPDATE ON temp_message FOR EACH LINE

  declare

  Conn UTL_SMTP . CONNECTION ;

  msg VARCHAR2 (2000);

  Start

  Conn := UTL_SMTP . open_connection ( host => '10.250.1.149', port=>25 );

  UTL_SMTP . HELO ( conn, '10.250.1.149');

  UTL_SMTP . mail ( conn, '[email protected]');

  UTL_SMTP . RCPT () conn ' [email protected]');

  msg := "Hello, this is test mail." ;

  UTL_SMTP .data( conn, msg);

  UTL_SMTP . quit smoking ( conn );

  exception when others then

  dbms_output.put_line (sqlerrm);

  raise_application_error (-20000,

  "Failed to send because of the following error messages: ' " || sqlerrm);

  end;

  Insert in temp_message values ()1

  );

  When I insert the record in the table there are given the following error.

  ORA-20000: failed to send messages because of the following error: ORA-24247: access denied by access control (ACL) of network list

  ORA-06512: at the 'APPS '. TEMP_TEMP_MESSAGE', line 14

  ORA-04088: error during execution of trigger ' APPS. TEMP_TEMP_MESSAGE'

  But if I run the next plsql through sqlplus send mail successfully:

  declare

  Conn UTL_SMTP . CONNECTION ;

  MSG VARCHAR2 (2000);

  Start

  Conn := UTL_SMTP . open_connection ( host => '10.250.1.149', port=>25 );

  UTL_SMTP . HELO ( conn, '10.250.1.149');

  UTL_SMTP . mail ( conn, '[email protected]');

  UTL_SMTP . RCPT () conn ' [email protected]');

  msg := "Hello, this is test mail." ;

  UTL_SMTP .data( conn, msg);

  UTL_SMTP . quit smoking ( conn );

  exception when others then

  dbms_output.put_line (sqlerrm);

  raise_application_error (-20000,

  "Failed to send because of the following error messages: ' " || sqlerrm);

  end;

  Thanks in advance.

  Yoann

  To resolve ORA-24247 you must:

  (1) create an acl (if it is not already created)

  (2) add the user privileges using the resources of the network

  (3) to use the ACL to a specific address

  This might be useful

  How to fix an ORA-24247: access denied by access control (ACL) of network list | DB tips

• LabVIEW VI error when executing DLL functions

  Hello OR developers!

  I have driver for windows application created by Jungo WinDriver program for PCI-E card.

  Application works very well. I have edited and compiled the project as DLL manual suite.

  I can read successfully resource information of the PCI-E card such as bars of memory, its size, disruption of functions etc.

  Next, I need to perform DMA transfers. The application supports these functions and works.

  I followed feature-by-feature and see if my code works correctly and he returned to Labview information - successful execution of the function.

  First of all is strange that whenever I close VI I have error message:

  "LabView.exe has encountered a problem and needs to close. We are sorry for the inconvenience ".

  fDebug: 0 Offset: 0083002e

  Exception information

  Code: 0xc0000005 flags 0x0

  Address record 0 x 0 0x0000000000c3002e

  ......................................................................

  ......................................................................

  But when I'm building application EXE of VI - this error do not occur.

  Maybe someone can help me or point on the string I managed properly resources LabView and C?

  LabView block sometimes after a few seconds after successful execution of VI.

  The code below:

  If an application calls a DLL written in a given buffer, the application should allocate memory buffer and release it afterwards. This is the case for all languages, not only for the LV for create a buffer tank one way would be to create a U8 array with sufficient size and to convert the table to a string using the function 'Type Cast'. See the documentation for the DLL for the minimum size of the buffer. Maybe the DLL returns an error code if the buffer size is to small. If you can get the maximum size of the tank messages, add 1 (for the trailing NULL character) as the size of the array U8 and you should be on the safe side. Same for the other settings, especially for tables.

• Error when using Google Chrome on Windows 7 x 64 BSOD.

  Hello

  I am experiencing BSOD random days on a pretty new install of Windows 7. It is not that occur when you perform heavy tasks (when making music with lots of ram and CPU in use), but (I assume) when browsing with Google Chrome. It seems completely random, can not find the problem... I have a .dmp file and downloaded to my dropbox. Maybe someone can analyze and find the faulty driver or something?
  Link: http://dl.dropbox.com/u/10938251/MEMORY.rar
  Hope to hear from someone!
  Thank you
  Pablo

  These accidents were caused by the corruption of memory (probably a driver).  Run these two tests to check your memory and find which driver is causing the problem.

  If you are overclocking reset all default before running these tests.
  In other words STOP!

  1 - Memtest.

  * Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. "http://www.memtest.org/#downiso"] Memtest86 + - Advanced Memory Diagnostic tool

  * Boot from the CD and let it run at least 5 or 6 passes.

  Remember, anytime Memtest reports errors, it can be bad RAM or a bad motherboard slot.

  Test the sticks individually and if you find a good, test it in all slots.

  Any error is indicative of a memory problem.

  If a well-known stick fails in a slot of motherboard, it's probably the slot.

  http://www.SevenForums.com/tutorials/105647-RAM-test-Memtest86.html

  2. Driver Verifier

  Using Driver Verifier is a dubious proposition. Most of the time it will crash and it will tell you what is the driver. But sometimes it will crash and will not tell you the driver. Sometimes it will crash until you can connect to Windows. If you can't mode without failure, then you will have to resort to editing the registry offline to disable driver verifier.

  I suggest that you first back up your data and make sure you have access to another computer so you can contact us in case of problems. Then do a system restore point (so you can restore the system using the functionality of Vista/Win7 Startup Repair).

  In Windows 7, you can do a startup repair disk by clicking Start... All programs... Maintenance... Create a system - with Windows Vista repair disc, you need to use your drive installation or from the "Repair your computer" option at the top of the Safe Mode menu.

  So, here is the procedure:
  -Go to start and type "auditor" (without the quotes) and press enter
  -Select 'Create a custom settings (for code developers)' and click 'Next '.
  -Select "Select individual settings from the list complete" and click "Next".
  -Select the entire document except for "Low resource Simulation" and click "next".
  -Select "Select driver names from a list", then click "next".
  Select all drivers that are NOT provided by Microsoft, and then click "Next".
  -On the next page, select "Finish".

  Restart the system and wait as he crashed to blue screen. Continue to use your system normally and if you know what are the causes of the crash, do it several times. The objective here is to get the system crash because Driver Verifier is stressing out the drivers. If it is not planted for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

  If you are unable to Windows because it crashes too early, try safe mode.
  If you can't mode without fail, try to use the system from the installation DVD restore to bring the system back to the previous point of restoration that you created.
  http://www.SevenForums.com/tutorials/101379-Driver-Verifier-enable-disable.html

  Further reading
  "http://support.microsoft.com/kb/244617"] using Driver Verifier to identify issues with Windows drivers for users advanced

• WCF error when using the API of VSM

  VSM 9.1.4

  Oracle 10g R2

  I am attemtping to use the "MessageSendMessage" command in the VSM API to send back the client permissions and I get the following error message when running it from the VSM server.

  ERROR: The operation 'ContractUnlinkCIAsync' cannot be loaded because it has a parameter or type System.ServiceModel.Channels.Message or a type that has the MessageContractAttribute and other parameters of different types of return. When using System.ServiceModel.Channels.Message or types with MessageContractAttribute, the method should not use other types of settings.

  It's an odd error because I do not use the "ContractUnlinkCI" command which tells me that there is a problem with the generation of the class file.

  I ran the following command to generate my config file and the class in the directory "C:\Program Files (x 86) \Microsoft 4.0 Tools":

  Svcutil t:code /MessageContract. [URL ServiceManager.svc] / out: ISMAPI.cs /config:ISMAPI.config

  The class files and generated config ok. Then I copied the game config to the Web site's web.config file:

  < system.serviceModel >

  < links >

  < basicHttpBinding >

  < connection name = "BasicHttpBinding_IServiceManager" / >

  < / basicHttpBinding >

  < / links >

  < customer >

  < endpoint address = "[ServiceManager.svc URL]" binding = "basicHttpBinding" bindingConfiguration = contract "BasicHttpBinding_IServiceManager" = "IServiceManager" name = "BasicHttpBinding_IServiceManager" / >

  < / customer >

  < system.serviceModel >

  I put the ISMAPI.cs file in the App_Code to my site folder:

  

  My code works fine when I run locally and include the correct querystring values, but it returns the error above, when I run the code from the VSM server. The query string I used: default.aspx? ajaxfunction = 2 & tasknumber = 425134 & agent = 2370 & recvofficer = 2370

  using System;
  using System.Collections.Generic;
  using System.Web;
  using System.Web.UI;
  using System.Web.UI.WebControls;
  using System.Data;
  using Oracle.DataAccess.Client;
  using Oracle.DataAccess.Types;
  using System.Runtime.Serialization;
  using System.ServiceModel;

  partial class _Default: System.Web.UI.Page
  {
  Protected Sub Page_Load (object sender, EventArgs e)
  {
  Response.Expires = - 1;
  Response.ContentType = "text/plain";
  If (Request.QueryString ["ajaxfunction"]! = null)
  {
  Try
  {
  Int16 intFunction = Int16.Parse (Request.QueryString ["ajaxfunction"]. (ToString());
  Switch (intFunction)
  {
  case 1:
  If (Request.QueryString ["tasknumber"]! = null)
  {
  Int64 intTaskNumber = Int64.Parse (Request.QueryString ["tasknumber"]. (ToString());
  Response.Write (getTaskApprovalComments (intTaskNumber.ToString ()));
  }
  break;
  case 2:
  If (Request.QueryString ["tasknumber"]! = null & & Request.QueryString ["officer"]! = null & & Request.QueryString ["recvofficer"]! = null)
  {
  MessageRequest load = new MessageRequest();
  inStruct.sLoginUserID = System.Configuration.ConfigurationManager.AppSettings ["apiLogin"];
  inStruct.sLoginPassword = System.Configuration.ConfigurationManager.AppSettings ["apiPassword"];
  inStruct.sDatabase = System.Configuration.ConfigurationManager.AppSettings ["apiDatabase"];
  inStruct.eEntityType = CRTEntityForEmail.Task;
  inStruct.nEntityRef = Int32.Parse (Request.QueryString ["tasknumber"]);
  inStruct.ePriority = MailPriority.Normal;
  inStruct.eMMAMessageType = MessageMMAType.Approval;
  inStruct.nMessageType = 130;
  inStruct.lRecipientRef = ' ~ ' + Request.QueryString ["recvofficer"];
  inStruct.eRecipientType = MessageRecipientType.Person;
  inStruct.bEmail = true;
  MessageResponse outStruct = new MessageResponse();
  SMC ServiceManagerClient = new ServiceManagerClient();
  outStruct = SCM. MessageSendMessage (inStruct);
  Response.Write (outStruct.sMessage);
  }
  break;
  by default:
  Response.Write ("ERROR: invalid function!");
  break;
  }
  }
  catch (System.Exception Exception)
  {
  Response.Write ("ERROR:" + exception.) (Message);
  }
  }
  Response.End ();
  }

  I hope one of the other directors VSM has met this problem and knows a solution. I tried Googling this issue but with my knowledge of WCF, I don't know what I'm looking at. I also tried commenting on the problem area in the ISMAPI.cs file but it gives me an other errors so I obviously don't know what I'm doing.

  Thank you.

  If locally it works fine I guess you should compare the versions of .net framework assigned to your web applications (application pool), and all the parameters specified in the web.config file.

• Popup error when using the AJAX or update Action for the region or a State

  Hello

  I had a problem with an application that I developed and I was banging my head against the wall with this for some time without success. Several pages in my application rely on the use of AJAX to refresh a region on the page with the updated data, running every 5 seconds. I have the following code in the foot in my region:

  var refresh_region = function (region_in) {
      try {
          jQuery(region_in).trigger('apexrefresh');
      } catch (e) {
          //Suppress error messages
      } finally {
          setTimeout(function() {refresh_region(region_in)}, 5000);
      }
  }
  refresh_region('##REGION_STATIC_ID#');
  
  
  

  What is happening is that I often have a popup with the title "Message from Web page:" and one of the descriptions following error (with the last being the most common):

  • : Error - HTTP Version not supported
  • Error: error - unknown

  The problem is that this page is used on the kiosks without keyboard, and once the error popup is displayed, the page continues to answer and user interaction to click on the Ok"" button. Another question, which is even more frustrating, is that these windows will accumulate above the other nearly one hundred sometimes profoundly, to the point where, sometimes, I need to force, exit the browser or restart the kiosk. There are also cases where the entire application stops responding and none of the pages will load. The only way to solve this problem is to have my DBA restart Glassfish. He went through some of the papers, but he sees nothing specific that helps him understand why he keeps to himself, but he believes that all these popups eat connections until the server runs.

  This has been a recurring topic since the app went live and I had hoped that with the help of a block try {} catch {} would prevent these popups errors but no luck. I also made a copy of the page today and refresh moved dynamic Action using the timer plugin but the popup always appears. I am following up to see if it happens more often than the AJAX approach.

  In the end, there are two issues here:

  1. What causes the error in the first place?
  2. How can I prevent the error popup windows until I can find #1

  I have tried everything I can find online to disable popups, all of this without a bit of luck:

  • Using try {} catch {}
  • Disable script debugging in Internet Explorer
  • Uncheck 'display a notification of every script error '.
  • Catch the window.onerror event

  Does anyone have any suggestions on how I can avoid these popups?

  I have a copy of the application on apex.oracle.com:

  • Workspace: SCCC_TEST
  • User/Pass: TEST/test
  • Page: 5

  Thank you!

  Once I started to think the ajax Manager that I started, I was wondering if ajax would actually raise an error at all, and it is not just the success of shooting when but throwing an error because it cannot handle the return (error page html for example). I'm not sure.

  You can try to use this code, which will replace the current call and will call _Appel with your own parameters. _Appel is a private member is not accessible so it's probably the best alternative. Not really a hack in my book. The structure is in place, then why not.

  //preserve original function
  var asw_orig = apex.server.widget;
  //override existing function
  apex.server.widget = function(pName, pData, pOptions){
    var lOpts = pOptions;
    //set the error handler function
    lOpts.error = function(){alert("this is my error handler function");};
    //pass along the variables to the original call
    asw_orig(pName, pData, lOpts);
  };
  

  I wondered if maybe the session may have expired at a certain time and therefor, you found these errors, because the update is not aware of this and therefore makes invalid calls. Just throw something out there.

• error when calling a function package

  any idea why my object is slip out during a function call. the error is
  oracle.apps.fnd.framework.OAException: java.sql.SQLException: ORA-06502: PL/SQL: digital or value error: character of number conversion error
  ORA-06512: at line 1
  
  It errors when cs.execute () is. What is the investment? Thanks for the help...
  
  
  then the pkg func is xxx.get_log
  Get_Log (rmode in NUMBER, doc_type IN VARCHAR2 DEFAULT 'SUCH', IN VARCHAR2 DEFAULT NULL, annual
  doc_num IN VARCHAR2 DEFAULT NULL-, p_out out varchar2.
  )
  RETURN varchar2 IS...
  
  the co
  _______________
  ParamDocLocatorParamList serializable [] = {paramRMODE, paramDOC_TYPE, paramDOC_ID, paramDOC_NUM, p_out};
  
  Am = (OAApplicationModule) pageContext.getApplicationModule (webBean) OAApplicationModule;
  OADBTransaction dbtrans;
  OAViewObject docLocator = (OAViewObject) am.findViewObject ("DocLocatorVO1");
  
  rtxt0. SetValue (pageContext, "here it is" + am.invokeMethod ("getHTMLString", paramDocLocatorParamList));
  docLocator.executeQuery ();
  
  
  am.invokeMethod ("getHTMLString", paramDocLocatorParamList);
  
  
  _____________________
  
  the impl
  
  public String getHTMLString (String paramRMODE, String paramDOC_TYPE, String paramDOC_ID, String paramDOC_NUM, String p_out)
  {
  System.out.println ("enter the Impl AM");
  
  
  CallableStatement st = null;
  // {
  TXN OADBTransaction = (OADBTransaction) getDBTransaction ();
  Connection Conn = txn.getJdbcConnection ();
  
  String sql = "START: 5: = test_proc.get_log (: 1,: 2: 3: 4);" END; ";
  
  CallableStatement cs = txn.createCallableStatement(sql,1);
  String ErrorExist = "";
  String getHTML = "";
  
  Try
  {
  cs.setString (1, paramRMODE);
  cs.setString (2, paramDOC_TYPE);
  cs.setString (3, paramDOC_ID);
  cs.setString (4, paramDOC_NUM);
  cs.setString(5,p_out); -param
  
  / * cs.registerOutParameter(1,Types.CHAR);
  cs.registerOutParameter(2,Types.CHAR);
  cs.registerOutParameter(3,Types.CHAR);
  cs.registerOutParameter(4,Types.CHAR); * /
  cs.registerOutParameter(5,Types.CHAR);
  CS. Execute();
  getHTML = cs.getString (5);
  
  / * System.out.println ("getHTML is" + getHTML);
  
  CS. Close();
  If ("E".equals (ErrorExist))
  throw new OAException ("payment request is already cancelled");
  
  // */
  }
  
  catch (SQLException sqle)
  {
  try {cs.close (;})
  catch (Exception e) {}
  throw OAException.wrapperException (sqle);
  }
  Doctype string = paramDOC_TYPE;
  String docnum = paramDOC_NUM;
  
  String html;
  
  
  System.out.println ("paramDOC_TYPE in IMPL is" + doctype);
  System.out.println ("paramDOC_Numb in IMPL is" + docnum);
  
  
  GetHTML return;

  Hello
  Your package is to have different input parameters types,
  then the pkg func is xxx.get_log
  Get_Log (rmode in NUMBER, doc_type IN VARCHAR2 DEFAULT 'SUCH', IN VARCHAR2 DEFAULT NULL, annual
  doc_num IN VARCHAR2 DEFAULT NULL-, p_out out varchar2.
  )

  But you spend all String, could you please do it
  setInt rmode value,
  as

  cs.setInt (2, Integer.parseInt (paramRMODE));

  If paramRMODE is very large number, use setLong.

  Thank you

  With respect,
  Kali.
  OSSi.

• Tecra 8100 system error when using Bank B

  Hello

  I get Bluscreens and system errors when you use Bank B. When you use Module1 in the Bank, everything is ok. When the same module as Bank A Bank (Bank A + B) b, I get errors.

  So, what would it be? What I have to 'turn on' the use of BANK B anywhere or not it looks like its defekt?

  Thanks for any help

  Hello

  Well, you must replace the motherboard if the memory bank has a defect. In this case, the only good way to connect with the service partner. They might give you detailed information.

  Good bye

• unknown error when using vi express daq devices

  Hi there I have unknown error when you try to use express DAQ of VI. I downloaded and installed device drivers OR who needed to generate EXE since then this problem was occurring what should I do I've done everything that has been mentioned in the following thread

  (http://forums.ni.com/ni/board/message?board.id=170&message.id=336246&query.id=2154746#M336246), but no use, I'm not able to understand the problem can someone help me.

  Hi david thank you for everything my problem is solved by formatting the c drive that was the only solution... Thanks anyway bye...

• Moved to the new server and updated applications upgraded to the APEX, 4.2.6.00.03 and get the random error when using IE 11.

  Hello

  I just moved a set of applications on a new server running Oracle 12 c and APEX 4.2.6.00.03, applications where initially on Oracle 10 G database with APEX 3.2.

  When you access via IE 11 users receive the error message after, when it appears that the only way to clear it is to close IE and reopen the application.

  

  There is an application that uses a database to MYSQL link, but the error when you use applications that do not use the link, so I'm not sure how to solve the problem.

  The error does not appear when you access applications through Chrome, but not all users have installed chrome.

  Thank you

  Ronnie

  Well Ronnie,

  This thread suppose to have a problem like yours and resolved. Please try on your side:

  After the footer I use: dbms_session.close_database_link ('mysql_databaselink_name');

  Please Urgent help on ora_sqlcode :-28500

  It will be useful.

  Thank you

  Sunil Bhatia

• Error when using the plugin

  Hello
  
  I get a strange error when I try to use a plugin.
  
  On page 5 of the Wizard after you press on create a new element on a region, it gives me the following error:
  ORA-06502 pl sql numeric or value error character string too small buffer
  
  I guess that's the page where the wizard is supposed to show me the attributes of plugins, because if I continue the wizard I have all of the attributes listed in the plugin either.
  
  Anyone knows what is the cause?
  
  Here is the error:
  http://test.Kolonist.dk/SQL_ERROR.jpg

  Hello

  Yes, this is a known issue that will be fixed in our 4.0.2 group of hotfixes.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• In Oracle 10 g error when using COLLECT

  I get the error when you use collect in 10g
  
  SQL > ed
  A written file afiedt.buf
  
  1. SELECT deptno
  2, COLLECT (ename) AS PGE
  3 FROM emp
  GROUP 4 BY
  5 * deptno
  SQL > /.
  COLLECT (ename) AS PGE
  *
  ERROR on line 2:
  ORA-00932: inconsistent data types: expected NUMBER obtained -
  
  Please give me the solution.

  you use the old version of SQL * more. If you use the later version, it will give you correct the result.

  Published by: ūnōrum on March 14, 2010 04:25