My gfxui has stopped working
It has just stopped working. How can I solve this problem?
According to an online source, "gfxui.exe is the control panel for the Intel GMA graphics chipset." If it's related to your hardware/drivers, nothing to do with Microsoft.
Tags: Windows
Similar Questions
-
HP Elitebook 8470 laptop PC - graphics Intel HD 4000 - GfxUI has stopped working - Win 7 x 64
Hello!
Since I installed the Intel video driver and Control Panel 8.15.10.2712 22 June 2012 (sp57420.exe) - later recommended by HP.com pilot for my Elitebook 8470 p / OS, I get the error message "GfxUI has stopped working" when you click on "Options and support" in the Intel graphics card and the Media Control Panel.
Everything works well except this problem, forbidding me to access this menu.
Some details of my system:
-Laptop: HP Elitebook 8470p B6P90EA #B10 (16 GB of RAM)
-OS: Windows 7 Ultimate x 64 (service pack 1)
-J' have Microsoft.NET framework 3.5.1 active (default value of Windows 7)
-J' installed Microsoft.NET framework 4.5.1
Some attempts at solving problems (with no success), I did:
-Uninstalled and reinstalled video driver;
-Microsoft.NET framework 4.5.1 uninstalled and reinstalled the driver video;
Can someone help me to solve this issue, please?
Here is the response from the INTEL Support:
I'm sorry to hear that have had problems with the Intel graphics driver.
This problem has been reported previously, and Intel has fixed with the new drivers.
Please see the link below for more information on your problem:
http://www.Intel.com/support/graphics/sb/CS-009483.htm
Here is the link for the latest video drivers:
HP will update this version of the problem driver too, based on the INTEL update?
-
I can't open some programs and also when the computer start he says that gfxui has stopped working. What I have to do work?
Hi, Rosemary,
Do you know when this problem started? Try a system restore to a point in time BEFORE the problem started. If the first attempt fails, then try an earlier point or two. NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.
Without knowing your OS or the exact error message and everything Word to Word or the manufacturer, brand and model of your computer (especially the chipset), it is very difficult to provide you with clear instructions or recommendations; However, here is a link to another thread where someone had the same problem and there are two solutions (both different and both worth a try - if the first doesn't work, try the second): http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/gfxui-has-stopped-working/e7f88c22-7c58-4fc2-9ae9-667556d0c4fc.
If this does not help, check out some of the alternative links on this problem in the following search: http://www.bing.com/search?q=gfxui%20has%20stopped%20working&PQ=gfxUI&SP=2&QS=AS&SK=AS1&sc=8-5&form=BB07SS&pc=BB07. If you want, you can refine the search to include more information, such as your operating system or suite of the message and the results could be more useful.
I hope this helps. If this isn't the case, post back with the above-mentioned information that would help as well as what you have tried and what happened when you did.
Good luck!
-
A week ago I installed a Windows Update. Shortly after, I tried to open Moxilla Firefox and received the error message "GfxUI has stopped working". Moxilla Firefox program displays a message "Not responding." When I re - try, most often Moxilla Firefox will open on the 2nd attempt.
Your question belonged to a forum of Firefox. Start here: http://support.mozilla.com/en-US/forums
-
When I right click on the desktop and click graphics properties a message comes up saying GfxUI has stopped working and Windows is trying to find a solution.
Hello
You did changes to the computer before the show?
Follow the steps in the link given below and check if that helps.
-
get the following error message: gfxui has stopped working
have a gateway with windos 7 Home program get two error messages. Gfxui and photo frame does not has stopped working. Don't know what they mean for beginners. Can any body explain to me please?
Thanls
gfxui is part of the Intel graphics drivers. So, please update your graphics driver to resolve the message "stopped working".
"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/ -
Hi guys,.
When I start my laptop there is a popup saying "GFXUI stopped working.
Please tell me what to do...
Thank you
Ajay
The seams of this file to be part of the Intel graphics drivers [1]. Install the latest Intel graphics drivers to fix.
André
[1] http://answers.yahoo.com/question/index?qid=20100208064051AArbWBM
"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
How can I fix it
See patch here:
Intel Support community
http://communities.Intel.com/message/131637You may need to update your graphics driver:
Intel Driver Update Utility Graphics (automatically identify and find drivers)
http://www.Intel.com/p/en_US/support/detect/graphics -
When I start my computer it say the GfxUI has stopped working then the Mcafee said computer at risk that he will not keep the antivirus scan
Hello
1. do you remember make changes to your computer before this problem?
Method 1:
Step 1:
Start the computer in safe mode and see if the problem occurs. Follow the steps from the link to start in safe mode: http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode
Step 2:
If the works in safe mode and then start the clean boot computer and check to see if it helps: How to troubleshoot a problem by performing a clean Windows Vista or Windows 7 boot http://support.microsoft.com/kb/929135
Note: when you are finished troubleshooting, follow step 7 to start the computer in normal startup.
Method 2:
Try to update the graphics driver to your computer and check if it works: http://windows.microsoft.com/en-US/windows7/Automatically-get-recommended-drivers-and-updates-for-your-hardware
Method 3:
Try to do a scan of your computer for viruses using the Microsoft Safety Scanner by clicking on this link: http://www.microsoft.com/security/scanner/
-
GfxUI.exe has stopped working after rebooting the computer.
Original title: error GfxUI.exe
I've been running Vista business for a few years. Last week, after the reboot, I get an error message that GfxUI.exe has stopped working. After that I closed the error box, the PC works fine. I updated the graphic driver Intel, but always the message. Why now I get the message and how can I solve this problem?
Hi Kea2300,
Did you the latest changes on the system?
This error message indicates to the Intel graphics driver.
Because you tried to update the Intel graphics card, you can try to perform a clean boot and check if the problem persists.
A clean boot to check if startup item or services to third-party application is causing this issue.
You can read the following article to put the computer in a clean boot:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.
Hope this information is useful.
-
GFXUI and intel turbo boost monitor has stopped working
I get errors that gfxui stopped working, and also that the intel turbo boost monitor has stopped working. Have installed all the drivers and installed their return. Also uninstalled microsoft NET framework and installed back. Always the same mistakes. What should I do?
Almehand
in the Panel "programs and features".
Select "turn on or off windows features.
then scroll down and look for ".net Framework 3.5.1."
first disable and uninstall
then restart the PC
then, click on the checkbox to re activate .net Framework 3.5.1.
Restart the PC
Let us know if this solves the problem
-
My iPhoto has stopped working. I did clean up. Now, when I click it shows cannot be opened because of a problem. The problem has not said.
What version of OS X (or, if all goes well, Mac OS) are you running?
What version of iPhoto do you run?
iPhoto was not maintained or updated updated by Apple for about eighteen months. Photos taken app supported since that time.
-
Click force has stopped working
Hi, I'm on MacBook Pro (15-inch, mid-2015, retina), freshly updated for Sierra, force click has stopped working.
I have checked all the options, rebooted the system, still no clear sign of what is the problem.
Does anyone have the same problem? How to check weather force/pad touch works well?
Any suggestions what to do?
A pointer more, I also started to use the new keyboard to work, but my memory then click force was working well.
This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.
-
iTunes64Setup - 12.4.3.1 worked very well and no problems on Windows 7.
After the update iTunes6464Setup - 12.5.1.21 or iTunes64Setup - 12.5.1.21, APPCRASH arrived.
Get 2 x "iTunes has stopped working" and the messages to "Close the program" when you try to view the store / App Store or view account.
Possible only "close program"...
Tried to uninstall ALL Apple software (with deletion of all files) and reinstall again but still the same error!
All software average iTunes to Apple, Apple Software Update, Apple Mobile Device Support, iCloud, Hello, Apple Application Support (32-bit and 64-bit).
Checked the event viewer:
1. error message:
Name of the failing application: iTunes.exe, version: 12.5.1.21, time stamp: 0x57cfb09f
Name of the failed module: WebKit.dll, version: 7602.1050.4.5, time stamp: 0x57c11f7f
Exception code: 0xc0000005
Offset: 0x004f0e09
ID of the process failing: 0xcc4
Start time of application vulnerabilities: 0x01d218b3194e2f01
The failing application path: C:\Program Files\iTunes\iTunes.exe
Path of the failing module: C:\Program Files (x 86) \Common Files\Apple\Apple Application Support\WebKit.dll
Report ID: 68f80588-84a6-11e6-8df8-4851b741621f
2. Windows Error Reporting
Fault of type 1024926102, bucket 25
Event name: APPCRASH
Answer: No available
Cabin ID: 0
Signature of the problem:
P1: iTunes.exe
P2: 12.5.1.21
P3: 57cfb09f
P4: WebKit.dll
P5: 7602.1050.4.5
P6: 57c11f7f
P7: c0000005
P8: 004f0e09
P9:
P10:
Hello, follow the instructions If you see 7 error (error Windows 193) when you try to install iTunes for Windows - Apple Support
-
iMovie has stopped working since iOS 10
iMovie has stopped working since iOS 10
Now, all I see is a black screen and then it throws me out of the app however does not close the app and the problem does not improve. I lost my summer and extra time making a super great way to 5 hours difficulty megaforce and now I can't watch it
Hello iMovie does not work,
After reviewing your post, it looks like the iMovie app is black and take you to the home on its own screen.
I recommend you read these articles, there are a few things that we can try to get the application running again.Force an application to close on your iPhone, iPad or iPod touch - Apple Support
Restart your iPhone, iPad or iPod touch - Apple SupportThank you for using communities of Apple Support. Good day.
Maybe you are looking for
-
Strange noise on a Satellite A55 S1064
Since two days I have a strange problem with my Satellite A55S1064 aged 1 month. The cooler was very quiet because I bought the laptop, but 2 days ago it began to produce a strange noise that I can't really work on the laptop, it really of destructio
-
DeskJet 2542: How to scan a picture to an email
Hello. I have a hp deskjet printer 2542 and I would like to have some tips to know how to scan a photo to an email address.
-
x755w: x755w 128 GB Flash Drive does not work.
I recently bought two of the aforementioned usb 3.0 Flash Drives. At the same time I upgraded from Win8.1 to Win10. I tried to use one of the discs, but it would not appear. I tried on each of my machines: HP, Dell, Toshiba, Asus and it don't work
-
Where can I download the file endec.dll
My computer always asks an endec.dll file. Where can I download this file without having to download another registry cleaner or antivirus software or buy software of any kind? I'm willing to pay for the specific file I need. I just don't want all ot
-
BlackBerry Z10 how to sort messages Outlook on Z10?
How can I sort my email so that the older messages appear on the top not the bottom? I can ' find the option in the settings to achieve this.