Error when you try to create an Application of HFM 11.1.2.3

Similar Questions

• Error when you try to run an application that worked when built with 8.6

  I have a simple program that I wrote in the 8.6 version that I've never had a problem generation and execution of applications built with it to 8.6.  Two weeks ago, I got 2009 by mail because we had very recently purchased 8.6 and I get errors when you try to run an application built with the same code using 2009.  The error relates to the Mean.vi.  He claims that he can't find it.  The error I get is as follows:

  Error loading VI 'NI_AALBase.lvlib:Mean.vi '.  LabVIEW support 3 error code: could not load façade.  I don't have access to the front panel of this vi, so I wonder if there is a problem with the runtime and not my code.  Please answer as soon as possible because it will quickly start to the impact of my calendar.  Thank you.

  Hello!

  The same problem ?

  I talked with my local OR technical support team. The application now works without any problem.

  Rule of thumb: when creating a Setup program do not forget that the option "Run Time Engine xxxx" in the category "Other installers" is selected despite the fact that the runtime is already installed.

  Best regards.

• Satellite U205-S5034 - error when you try to create the recovery disks

  Hello world

  I have problems with the TOSHIBA recovery disk creator. When you try to create the recovery disks this error pops up:
  An unexpected error has occurred. Exit this application and start it again. (Error code: F1-0F00FE-00000002)

  The machine is a Satellite U205-S5034 under XP Pro SP3.

  Any help will be greatly appreciated. Thank you and have a nice day.

  DaveMatt44

  Hello

  What kind of DVD that you use to create a Toshiba Recovery disk? I have tried Verbatim DVD-R and TDK DVD-R and never had a problem with these discs. A friend tried DVD + R and he couldn t create a recovery disk. After he tried DVD-R and everything was fine but I do not know why this happened.
  So please try other discs.

  Also, check the Toshiba page for an update of the firmware of the CD/DVD drive. Maybe it will help you.

• Error when you try to view the application latencies

  I'm not able to get see Planner to latencies report application series of tests with multiple virtual machines in them. If I run a test that has 3-2 VMs in it while I'm able to view the results of the trial very well, however when I try to run tests with more of that I get errors when I try to view the results. When I try to load the web page results to see Planner, nothing happens, and I get the following error in viewplanner.log:

  2012-10-24 20:16:13, 025 INFO {}
  Unhandled error
  Traceback (most recent call changed):
  File "/ usr/lib/python2.6/site-packages/twisted/web/http.py", line 773, requestReceived
  Self.Process)
  File "/ usr/lib/python2.6/site-packages/twisted/web/server.py", line 127, process
  Self.Render (resrc)
  File "/ usr/lib/python2.6/site-packages/twisted/web/server.py", line 147, in rendering
  body = resrc.render (self)
  File "/ usr/lib/python2.6/site-packages/txjsonrpc/web/jsonrpc.py", line 112, rendering
  () defer.maybeDeferred(function,_*args).addErrback
  -< exception that is caught here >-
  File "/ usr/lib/python2.6/site-packages/twisted/internet/defer.py", line 133, in maybeDeferred
  result = f (* args, * kw)
  File "/ tmp/ViewPlanner/web_interface.py", line 527, jsonrpc_getResultsMap
  File "/ tmp/ViewPlanner/mysql_interface.py", line 571, in getTestAverages
  exceptions. KeyError: 0

  When I try to manually execute the python script statement, it tells me that there is no result for the test.

  I just ran a test locally with 276 VMs, according to viewplanner.log, all 276 VMs transferred their results to the device. Yet I still get this error when you try to view the results.

  I tried to create new images GoldenDesktop and GoldenClient, as well as deployed a new device see Planner and reinstalled all of its agent programs, nothing helps. Anyone know what could be the cause?

  We have seen this issue for large series and I attach a patch file that you can overwrite the/root/ViewPlanner harness directory and then restart the vdiappd service, and then you can give it a try.

  For manual results extratcion by using the report.pyc script, you must use '-j' I ' and '-j' operations if you ran just 1 iteration of the workload.

• Version of Photoshop elements Windows 14 - error when you try to create a Photomerge Panorama "documents must be registered before they can be merged. I tried a few of the fixes mentioned in these forums such as Edit-&gt; Preferences-&gt; general-&gt; res

  We know the fix for the bug "documents must be registered before they can be merged" when you try to create a Photomerge Panorama in PSE 14?

  I think I have found workarounds to the question "documents must be registered before they can be merged" (no thank you lack of Adobe customer support):

  Solution #1

  My workflow template is to take pictures with my SLR and save on the memory in the form of RAW files, download the images on my PC, then open the RAW files in Adobe Camera Raw and then save the images to jpeg using PSE. I wasn't able to create Photomerge Panorama with jpeg images I've saved, but I was able to create Photomerge Panorama with the images I have saved IF I save as TIFF 8-bit files in EPS. A condition for this workaround was that I had to save the pictures at their original resolution and not at a reduced resolution.

  Solution #2

  If I have a right-click on an image and selected open with 14 and observed PES Editor (RGB/8) * to the right of the file changes its name, which means PSE think he has not saved to the file. The solution is to go to file-> Save-> Save (replace existing file-Yes)-> OK. You can then use this file and others you perform the same steps to create a Photomerge Panorama.

  Solution #3

  The way to save JPEG files in PSE is to go to file-> save for Web-> Save-> Save. The workaround is to select the file-> save for the Web and then check the box include the color profile , then click on save and then save again. Then I'm able to merge JPEG files using Photomerge Panorama and I don't get the error message "Documents must be registered before they can be merged". I looked back 11 of PSE that is still on my PC and found that the Embed checkbox color profile did NOT have to be checked to get Photomerge to work for jpeg files. So it appears with PSE 14 Adobe changed the Photomerge Panorama script to require the image file the color profile embedded in the image. If the color profile is not embedded, PSE think the image file has unsaved changes. BTW, this bug, or "feature" has not changed with PSE 14.1.

• Error when you try to create the Contact form PSE13

  I get two error messages when you try to create a contact sheet

  "The operation could not be completed. The file or directory is not found. »

  then

  "Could not complete the command II Board contact because of a program error"

  I'm on iMac OSX Yosemite 10.10.2

  Updated for PSE12 when PSE13 is released

  No problems with PSE12

  If you go to

  (user) Library\Preferences\Adobe\Plugins\Adobe Board Contact II PSE12\Elements

  and remove the

  Adobe Board Contact PSE12 Pref.

  
  

  If all goes well, you should be able to use the plugin Contact Sheet II again.

  To view your library, the user in the menu go to the Finder press the Option key, then you should see library listed in the menu to reach.

• Error when you try to create documents printed in HR 7

  Hello
  I created a project of WebHelp HR 7 that I try to make a PDF file for, as well. Always, an error appears when you try to generate printed documentation, even if only the PDF or Word option is enabled. 7 HR processes and builds each of the pages, index, images, etc. He arrives at the end on the status bar and an error message that it was unable to generate the PDF file.
  
  In the view of output, I see that he successfully treated up to the end when he says (the last four lines are the error):
  Update the Table of contents...
  Updating the Index...
  Registration of the 'GVE_Help_.doc '...
  Generation of the "GVE_Help_.pdf"...
  Could not generate PDF "(le chemin d'accès est écrit ici mais a été supprimé pour ce post) file '..."
  Unable to save the 'GVE_Help_.doc '...
  Cleaning up temporary files...
  
  Internal error detected, impossible to generate printed Documentation.
  
  
  Is it possible to get printed documentation to work properly in RH 7? I get the same error for all WebHelp project that I opened in HR 7. I use Windows XP and Word 2003 on my PC, if that helps. I think, but not too sure, RoboPDF is still on my PC. This could be something to do with it?
  
  Thank you, in advance, for any comments and help.

  Try to build just for Word and then to create the PDF file from there. There is a known problem that affects some users, but not others. Unknown cause.

• Error when you try to download the application forms, not a valid Windows 32

  not a win32 application invalid and stop the download

  When I try to download tax forms IRS my computer says "application not valid windows 32 and stops downloading just 15 seconds before its filled! What the heck is wrong?

  Hello shelleyjane,

  Get the error: not a valid 32-bit application can have several origins:
  I have listed some of them below, and possible solutions.

  The file is corrupted, bad or missing.
  -If the hard disk is damaged or hurt it cause work programs to fail, either because not all data can be read from the hard drive the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.
  -If you run the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.
  -You can download the app again and see if you still get the error message.

  File is not designed for your version of Windows:
  -If you try to run a program that is not designed for your version of Windows, you can get this error.
  -Although many old programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will not work.
  -If the program is an MS-DOS program more former start program or Windows, you can get this error.
  -If the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.

  File is a virus, worm or other malicious program file.
  - This error can be generated by a file that is a virus, worm, Trojan horse or other type of malware file. Often, this will result because the antivirus installed on the computer will not allow the file to install or run. Try to analyze the file to check, it is not a virus or infected.
  -If the file has been checked and is clean, it is always possible that the virus protection program or a another program installed on the computer is at the origin of questions during installation or execution of the program. Start the computer in Mode safe and try to run the program. start the computer in Mode safe will be that nothing is running in the background that could cause this problem.
  
  Hardware incompatibility.
  -If you get this error during the installation of a program, it is also possible that the CD-ROM drive or the drive that you are installing the program from is not compatible with Windows or has drivers that are not compatible with Windows.
  -Download the latest drivers for your CD player or other of the manufacturer of the computer or the manufacturer of the equipment. (Microsoft does not pilot for other materials)

  Let us know if that helps.

  Marilyn

• Error when you try to start iTunes: application not found Apple support

  How can I download apple for windows vista support

  I am trying to download itunes & when I try & open it he says, apple support application is not found, then how do I get itunes to start working again?

  Hello safy97,

  Do a search for your message of error, grown from a Forum of Discussion Apple with your same error message. See the post below. Several users used the Cr4z33 solutioin and have managed to have installed iTunes and work.

  http://discussions.Apple.com/thread.jspa?threadID=2151777

  If this does not help, I suggest you post in the Apple discussion forums. I have included a link below.
  http://discussions.Apple.com/forum.jspa?forumid=792&start=0

  Sincerely,

  Marilyn

• Error when you try to sign my application by ripple

  Can someone help me the following message when I try to sign my app with ripple "Build request failed with the message: [ERROR] unable to connect application - unable to find signature keys" I already received my key signature of BlackBerry so if anyone can help? " Thank you

  Configure you your signing keys in files that you received in the mail?

  PlayBook: http://glpr.ca/HjKWmv

  Smartphone: http://glpr.ca/HjL3i6

  And has configure you on the right SDK version? the keys must be moved whenever a new version of the SDK is installed. Instructions for the backup/restore are also these links.

  R

• BlackBerry Smartphones Firewall error when you try to use new applications of the AppWorld

  I have a BB "BOLD" (out of business).  When I try to register accounts with new App World, as SlackerRadio applications, I get this message:

  "The request... a attemtped to open a connection to a location inside the firewall and outside the firewall which is not allowed by your policy."

  Because I don't have a BB company, I'm not aware of any it policy or how I can adjust.  Everyone is having these issues?

  Thank you

  Jacquie

  • Carrier: AT & T
  • BlackBerry model: "BOLD"
  • BlackBerry OS (can be found in Options-> on): v.4.6.0.167 (Platform 4.0.0.157)
  • Version of App World (can be found by going to Options-> Advanced-> Applications) 1.0.0.28
  • BIS or BES (personal use or business use): BIS

  JacquieSamples,

  Just to be sure your BlackBerry is not a test of policy COMPUTER looking in Options-> Security-> General settings and scroll down to see if there is anything that is listed next to the field name of the IT strategy, if you see something there default even you have a COMPUTER policy.

  This article also shows how to reset a firewall prompt, you can have on your device:

  http://www.BlackBerry.com/BTSC/KB04050

  Please let us know if this solves your problem.

• Error when you try to create a region of the page generated by the anonymous pl/sql block

  Hi guys I tried to create a region of the page which is the source and anonymous pl/sql block and I have been making a few mistakes. Basically what I want this region to do, is to give the current user of the application one summarized data compared to there user name which is: app_user the code I used was

  declare

  ven_ret varchar2 (15);

  BEGIN

  ven_ret: = (select u.vendor of USERS4ARCHITEC u )

  
  

  where

  u.e_mail = V ('APP_USER')

  and not exists (select null from arch_tbl I where u.vendor = i.vendor and user_id = V ('APP_USER'))

  order u.vendor in ven_ret);

  END;

  /

  the structure of the table to the USERS4ARCHITEC table is

  User varchar2 (15) vendor2 (20)

  ----------------------------------------------------------------------------------

  user@1                                                                          sap

  user@1                                                                          oracle

  user@1                                                                           IBM                                                            <---------sample data

  user@2                                                                          Oracle

  user@2                                                                          cisco

  the structure of the table to the arch_tbl table is

  user                                                     vendor

  --------------------------------------------------------------

  user@1                                                 sap

  So if user@1 logs in the application of the region using the pl/sql code code above should display oracle and IBM, because these two sellers are always under his username that he has already used a form to insert the sap into the arch_tbl table. Please tell me what I'm doing wrong here. Thank you guys

  Why would you build a type psedu at APEX report MANUALLY when you can just build a relationship with the same selection you use now for your pl/sql dynamic region?  What is the purpose of building your own report when the tool made for you?

  Thank you

  Tony Miller
  Software LuvMuffin
  Ruckersville, WILL

• I get the message "unspecified error" when you try to create a system restore point

  That this is an autofocus of startoff a I have create, fSystem restoration returns with 'unspecified error', he never worked on my laptop.

  Can anyone help? Thks

  Hi somnop,

  1. What antivirus do you use?

  2. do you get any specific error code?

  Follow the steps below and check, if it helps.

  Step 1:

  Disable all security software and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2:

  Do SFC scan and check if the problem is related to corruption in the file system.

  Step 3:

  I know that you cannot create a restore but point as a test, try to do System Restore in safe mode and check if you are able to restore.

  Note: Restart the computer in normal mode after the test.

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• When you try to create an application Windows in DPS In - App purchases wont let me go further

  Hello

  I'm going through the process of trying to create a Windows application using the dps application builder.

  I get through the General and active this part very well, but when I get to the In - App purchase page I am stuck on the default price level. In the example, it shows com.adobe.dps.199

  The app that I produce doesn't have any In - app purchases. And it's already setup of Microsoft with no in-app purchases

  I tried to type in the price level Adobe box but no indication of the present key actually be at my disposal.

  Any ideas?

  Do not put anything in the box in-app purchase, just leave it blank.

  If the Send button lights means you have missed something on one of the pages required earlier. Make sure that there is a green check mark next to each item in the list of the pages on the left. If one of them doesn't have a green check mark means that you forgot a field that is required.

  If I had to guess I got say you forgot to specify the background color for the home screen on the active page. He often drops below the bottom of the screen on the small screens (such as my notebook), and is easy to Miss

  Neil

• Error when you try to deploy ADF application Java Cloud Service - SaaS Extension

  Hello guys,.

  I am trying to deploy a simple application of ADF in 'Oracle Java Cloud Service - SaaS Extension' and I'll always have the below error

  Work turns to failure to step to "Deploy the Application":

  

  Someone already had this error?

  Thanks in advance

  SID

  2014-12-10 11:06:20 PST: start action "deploy the Application.

  2014-12-10 11:06:20 PST: deploy Application started

  2014-12-10 11:06:28 PST: weblogic.application.ModuleException: weblogic.application.ModuleException:

  at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1531)

  at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:488)

  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

  at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)

  at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)

  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

  at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)

  to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:671)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

  at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:44)

  at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

  at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)

  at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:573)

  at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)

  at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)

  at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:327)

  at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)

  at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)

  at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)

  at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)

  at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)

  in weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$ 100 (DeploymentReceiverCallbackDeliverer.java:13)

  to weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$ 2.run(DeploymentReceiverCallbackDeliverer.java:68)

  to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:545)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  Caused by: java.security.AccessControlException: access denied ("java.net.NetPermission" "specifyStreamHandler")

  at java.security.AccessControlContext.checkPermission(AccessControlContext.java:372)

  at java.security.AccessController.checkPermission(AccessController.java:559)

  at java.lang.SecurityManager.checkPermission(SecurityManager.java:549)

  at java.net.URL.checkSpecifyHandler(URL.java:649)

  at java.net.URL. < init > (URL.java:373)

  at weblogic.application.io.MergedDescriptorFinder.getSource(MergedDescriptorFinder.java:46)

  at weblogic.application.io.DescriptorFinder.getSource(DescriptorFinder.java:44)

  at weblogic.utils.classloaders.MultiClassFinder.getSource(MultiClassFinder.java:67)

  at weblogic.application.utils.CompositeWebAppFinder.getSource(CompositeWebAppFinder.java:71)

  to weblogic.servlet.internal.War$ ResourceFinder.getSource (War.java:1213)

  to weblogic.servlet.internal.War$ ResourceFinder.getSource (War.java:1203)

  at weblogic.servlet.internal.War.getResourceAsSource(War.java:512)

  at weblogic.servlet.internal.WebAppServletContext.getResourceAsSource(WebAppServletContext.java:3436)

  at weblogic.servlet.internal.WebAppServletContext.getResourceAsSource(WebAppServletContext.java:3427)

  at weblogic.servlet.internal.WebAppServletContext.getResourceAsStream(WebAppServletContext.java:872)

  to com.sun.faces.config.ConfigureListener$ WebXmlProcessor.scanForFacesServlet (ConfigureListener.java:805)

  to com.sun.faces.config.ConfigureListener$ WebXmlProcessor. < init > (ConfigureListener.java:768)

  at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:178)

  to weblogic.servlet.internal.EventsManager$ FireContextListenerAction.run (EventsManager.java:481)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)

  at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1871)

  at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3173)

  at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1529)

  2014-12-10 11:06:28 PST: State action WL: failure

  2014-12-10 11:06:28 PST: Action FAILED with State action WL: failure

  2014-12-10 11:06:28 PST: check the server log of your cloud service Java for more information about the failure.

  2014-12-10 11:06:28 PST: Application Deployment failed.

  2014-12-10 11:06:28 PST: 'Deploy the Application' complete: FAILED status

  I don't think that you would be able to update the library in the 'SaaS Extension' of JCS version and the version of JDeveloper using must be 11.1.1.7.1. He has however separated 'Service of Cloud Computing Java' that gives you complete control over the WLS...

  --

  Jani Rautiainen

  Relationship with the developers of Applications in fusion

  https://blogs.Oracle.com/fadevrel/