No access after change from HTTP to HTTPS.

Similar Questions

• .htaccess code to change from http to https

  I would like to know what code I would put in my .htaccess file to make sure that all http pages are replaced by https pages if I type 'oldeworldelace.com' or 'www.oldeworldlace.com' or http://www.oldeworldlace.com in a browser window. I tried several ways but have had no success. I'm waiting for suggestions.

  My thought exactly.  HTTPS (secure socket) is going to be really slow.   It is not ideal for the pages of the site regularly. A secure socket is necessary on the URLs that handle sensitive data such as credit card info.

  Nancy O.

• Touchpad does not work after changing from Vista to XP Satellite A210

  Hello world!

  I changed my Windows and now, something is wrong with the Touchpad. It works like a mouse (the cursor moves right and left buttons are also correct).

  Before with Vista, I had the button send, Wi - Fi connection, something else and its evolution, and more he had extra blue light. Now these buttons are not active and not etrxa of light.

  Satellite A210 laptop.

  I already tried all possible drivers, but perhaps you could advice me something else.

  Thanks in advance!

  Please try this one
  http://Support1.toshiba-tro.de/Tedd-files2/0/tpdrv-20070809133247.zip

  and give us your feedback if this driver can help or not
  THX

• 160 U does not start after changing from 4 to 8 GB Ram

  Hey community,.

  I just installed two new RAM DDR3 1066 MHz 7-7-7-20 204pin modules of Corsair SO-DIMM to improve my U160 somewhat. It runs a Win 7 Pro 64 Home and already has been improved with a Samsung 250 GB SSD.

  The BIOS indicates the RAM properly but no matter if I try for a normal start or economy mode, restarting the laptop once the windows colors appear when starting. 'Last known version' does not help, nor let him start via a bootalble pen which I also installed this version of Windows. Because there is no blue or black screen I guess it's not a physical problem, but a prob of victory.

  Someone an idea?

  Thanks in advance,

  Baschdel

  Maybe run mem test a bar at a time to see if its bad? run the test of mem on a USB drive or a bootable cd. Lenovo is known to support only a certain amount of ram, I guess to avoid problems and complications. It is not their problem if you exceed nominal max and it does not work.

  http://www.memtest.org/

• A few questions after changing from Vista to Win XP on Satellite A135-S4427

  I bought a Toshiba Satellite A135-S4427 days. It comes with Vista, but some applications are not ready yet for this OS. So, I decided to remove it, then I did a new install of Win XP SP2.

  Here come the problems...
  (1) I could not find the driver for the system management Bus controller. There is an explicitly named SMBus available on the support site, but it was not accepted by the system.

  (2) after 2-3 hours of operation, when I use the mouse or the touchpad to open a file, folder, click a button, the system to freeze for a minute, then it works very well for a few minutes, then freezes, etc. Restarting the computer does not solve the problem.

  I can't explain this bad behavior :( I have not checked the security no virus was detected.

  Please, any idea to make my laptop works properly?

  Hello

  Satellite A135-S4427 seems to be a mobile US and therefore, you should check the site Web of Toshiba us for all the XP drivers.

  1.) system Management Bus Controller-> to my knowledge, you need to install the Intel chipset utility to fix this problem.

  (2.) for the most part these strange disruptions appears because of the CPU busy.
  You should check the processes running in the background of the operating system and try to defragment the HARD drive.

• drive external drive has a drive letter after changing from fat32 to ntfs

  I have an external drive seagate expansion 1 TB that has a usb 2.0 and the source of clean energy, which I transferred all music, videos ect.

  I thought I'd be smart and plug it into my xbox360 to live stream vids but all I ended up doing was changing all files to FAT32. I went through the process of change it back to ntfs and then rebooted my pc, but now the external hard drive has no drive letter or icon, although I can always find it plugged into usb as mass storage and it looks like that there are still files.

  Ive tried to make the new drive letter in disk management, but the option is not available, ive also tried ubcd but if honest im im not for sure how to run the program and connecting it to another pc does nothing. Ive tried also to update driver, but all it says it is only his good health and no new update.

  Is that what I do will allow me to open the external hard drive and keep my files that I hope is still intact to take it to a pro to fix...

  I have an external drive seagate expansion 1 TB that has a usb 2.0 and the source of clean energy, which I transferred all music, videos ect.

  I thought I'd be smart and plug it into my xbox360 to live stream vids but all I ended up doing was changing all files to FAT32. I went through the process of change it back to ntfs and then rebooted my pc, but now the external hard drive has no drive letter or icon, although I can always find it plugged into usb as mass storage and it looks like that there are still files.

  Ive tried to make the new drive letter in disk management, but the option is not available, ive also tried ubcd but if honest im im not for sure how to run the program and connecting it to another pc does nothing. Ive tried also to update driver, but all it says it is only his good health and no new update.

  Is that what I do will allow me to open the external hard drive and keep my files that I hope is still intact to take it to a pro to fix...

  Your description of what you did does not sense, so it is difficult to determine what are the things to the State in so it is difficult to give you advice on how to solve this problem.

  As a first observation, although when you got first the reader he might well have been formatted in FAT32, storage of files on it has no "Edit."  Because Windows understands FAT32, files would have stored on the HDD external and recovered as usual.  However, FAT32 imposes a 4 GB file size limit, so if you work with video, you probably want to reformat the drive to NTFS.  Sure, reformatting the drive erased everything that was on the disk, so I hope you kept your files to their original location before formatting.  If you format the drive without saving files AND that you have not used the drive, you can recover the data by using a tool likeRecuva data recovery.  Of course, the recovery of a 1 TB drive will take time...

  Please, step by step in detail what you were doing as "the process of change to ntfs.

  Please describe what shows disk management, in the upper pane, both in the lower pane.

  There should be 10 columns in the upper pane:
  Volume
  Page layout
  Type
  File system
  Status
  Capacity
  Free space
  % Free
  Fault tolerance
  Overhead

  The lower pane should have a color bar (or bars) that indicates if the space is used as a partition primary, unallocated, etc..  You can see the colors associated with different types on the view > settings > appearance tab.  The lower pane should also indicate if the drive is "online".

• How to save a scanned document after change from Portrait to landscape mode?

  I'm so frustrated that I used to be able to do without any problem and now registration is grey and when I send the document attached to an e-mail it is not oriented correctly.  Any suggestions?

  Thank you

  If you have Acrobat Reader you cannot save a document turned, because you can not actually turn the document (only the current view). You do have Acrobat Pro?

• Cannot access the files from the internal hard drive that has been converted to drive external hard after the motherboard is dead

  I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.

  I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.

  Uhm... I think the issue here is a misunderstanding of what you watch.

  If you want to access your files from the old hard drive - you need to look in the right place.  If the old system was "Windows 7", "Documents and Settings" is the * wrong * place to look and "Users" would be the place to go.

  You * will * take ownership and change permissions on ALL (you want to propagate to all subfolders/files when do - to save time) in order to get them properly.

  New-->: Windows Vista/7 would have your files located in the directory 'Users' of the root of the drive - and then under your username.

  • \USERS\\Desktop\
  • \USERS\\Downloads\
  • \USERS\\Favorites\
  • \USERS\\Documents\
  • \USERS\\Music\
  • \USERS\\Pictures\
  • \USERS\\Videos\

  ... etc...

  Documents and settings to WIndows Vista/Windows 7 is a symbolic link and would lead to what you see if you tried to use it.

• Can we change port HTTPS configuration manager 12345 please?

  Hi guys,.

  
  

  There is a review of security, and we need to change the HTTPS port number of configuration manager 12345 by default, can we and how please?

  
  

  Thank you

  Katherine
  

  Katherine,

  You must change the port number in the private.xml file, which is is /configmgr//settings/config folder.

  Restart the service after the change, you should fine.

  K

• How to change the table definition after upgrade from 9 to 10?

  after update from 9 to 10, DOF tables still as 9i:
  
  ................. PCTFREE, PCTUSED, INITRANS 40 10 1 MAXTRANS 255...
  ... inndex PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS...
  
  
  Is there a method to convert all tables to new style 10g without re-creating thousands of tables and emp/imp one then?
  
  
  Thank you

  You can use the package dbms_redefiinition to Redefine tables.
  You can find more information in this regard on the following links

  Syntax
  http://download.Oracle.com/docs/CD/B19306_01/AppDev.102/b14258/d_redefi.htm#CBBFDJBC

  All tasks
  http://www.Oracle.com/pls/db102/search?word=DBMS_REDEFINITION&PartNo=

• How can I change my HTTPS thing, so it isn't always pop up and ask questions about the sites Web secure when I play some games?

  Feel free to change the title

  How can I change my HTTPS thing, so it isn't always pop up and ask questions about the sites Web secure when I play some games?

  You're talking about Facebook?

  Try the gyration of the Secure Browsing

  http://www.Facebook.com/help?page=1079

• How to change the HTTPS Console Weblogic admin port

  Hello
  
  
  I want to change my HTTPS Console port which was default port 7799 to other ports and also weblogic admin port 7101 to another port.
  How we change that. Thank you
  
  
  Thank you
  Sachin Bhadauria

  you need to change the powers of oversight for the EMGC_GCDomain reflect the new administration server port.
  Go to the target-> Middleware-> EMGC_Domain
  Select Configuration of the target-> supervision of the identification information in the drop farm
  Change the Port field
  Return to the menu drop-down firm and select Refresh WebLogic Domain-> Add targets to update
  The objectives of OHS and Server Admin should now appear in the console. I checked on my test site.

• HARD does not work after changing the disk partitions recovery media creator

  Hello world

  After installing windoows 8.1 April major upgrade (win 8.1 presents as OEM), and have shrunk C partition to create a data partition "D", "Troubleshooting" option under advanced start menu is no longer available.

  Toshiba Recovery Media Creator does not work, too (it can not find any hard disk recovery partion).
  I got in the OEM recovery partition.
  I am also able to create a recovery using the Windows tool unit.
  You have no idea about it?

  Thank you very much!

  Hello

  Sorry to hear about all this. Unfortunately, you now have a big problem. I don't understand why you didn't create support of recovery before you started to change the factory settings, including to change the structure of the partitions of HARD drive.

  Mobile offered with factory settings a structure specific partitions and recovery recorded image is saved on the partition of drive specific and marked with invisible markers. These markers are visible for preinstalled Toshiba recovery media creator tool and when you start the tool can find points of reference and has full access to specific files.

  Unfortunately, after changing the original scores structure Toshiba tool cannot find these markers more and is not able to copy files from recovery media recovery. What you need now is the original recovery disk. Using this disk, you can install original recovery image and after doing this, you will have new factory settings.

  I know it sounds stupid now but you must order the original recovery disk and it can be done on https://backupmedia.toshiba.eu/landing.aspx

  If you have any other questions you are welcome.

• Outlook Express has stopped to let me access the internet from an e-mail.

  Outlook express

  A week ago, Outlook Express stopped allowing me to access the internet from an e-mail.  If someone sends you an e-mail with a WEB address, that it does not connect to it just says connection.  Could not find a way to fix this.  If anyone can help.  Thank you

  Hyperlinks do not work in Outlook Express or in Word (revised 29-Apr-09)
  http://support.Microsoft.com/kb/823301

  Hyperlinks do not work in Outlook Express after you put upgraded to IE7 [or IE8] (revised 29-Apr-09)
  http://support.Microsoft.com/kb/929867

  If still no joy:

  With the permission of MVP Frank Saunders. [RIP]

  If nothing happens when you click on a link:
  Open Windows Explorer or on the control panel.
  Go to tools | Folder options | Types of files.
  Scroll to [NONE] URL: HyperText Transfer Protocol (NOT the shortcut URL: Internet) and select it.
  Click Edit or advanced, depending on your version of Windows.
  Choose 'open '.
  Click on change.

  "Application used to perform action" should read:

  "C:\PROGRAM may EXPLORER\iexplore.exe" - nohome (check the path to)
  Iexplore.exe to ensure that it is correct and use the double quotes).

  DDE should be checked and in the boxes below, you should have:

  #1:
  « %1 »,,-1,0,,,
  #2
  IExplore
  #3 (white)

  #4
  WWW_OpenURL

  Protocol URL: HyperText Transfer with Privacy should be the same.

  If the foregoing is correct, uncheck the box: use DDE.
  

• Fan noise after changing graphics - Qosmio F10-101

  Two months ago, I had my graphics from nvidia fx 5700 for nvidia geforce go 6600.
  Since my computer toshiba qosmio f10-101. After changing the old graphics card there is a fan noise that starts and stops every 2 minutes, it makes me crazy whenever I'm hear.

  Can someone tell me if this is normal and if they know if the specific card is noisy in any laptop? or if there are ways to remove this noise or to maximize the speed of the noise. ??

  Post edited by: marlena

  Hello Marlena

  The Qosmio forum, you can find some similar topics with some interesting comments. On the http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=10944&messageID=42103

  Good bye