Error when you try to resize a hard disk

Similar Questions

• Satellite U205-S5034 - error when you try to create the recovery disks

  Hello world

  I have problems with the TOSHIBA recovery disk creator. When you try to create the recovery disks this error pops up:
  An unexpected error has occurred. Exit this application and start it again. (Error code: F1-0F00FE-00000002)

  The machine is a Satellite U205-S5034 under XP Pro SP3.

  Any help will be greatly appreciated. Thank you and have a nice day.

  DaveMatt44

  Hello

  What kind of DVD that you use to create a Toshiba Recovery disk? I have tried Verbatim DVD-R and TDK DVD-R and never had a problem with these discs. A friend tried DVD + R and he couldn t create a recovery disk. After he tried DVD-R and everything was fine but I do not know why this happened.
  So please try other discs.

  Also, check the Toshiba page for an update of the firmware of the CD/DVD drive. Maybe it will help you.

• "No disc" error when you try to access external hard drive...

  I have a USB key that I use to record music files. Whenever I try to open it, but it was giving me an error that says:
  "Windows - no disk. . There is no disk in the drive. Insert a disc into drive \Device\Harddisk\DR21.
  DR numbers change of 5, 17, 19 and 21 now. I tried to change the drive letter from the center of disk management, but who doesn't. I also uninstalled the drive and then re-installed, also without success. I have not tried reformatting the drive yet, mainly because I don't have the ability to transfer files via. I am running Windows XP.

  Any help would be appreciated!

  Hello

  1. What is the brand and model of the external drive?

  2. do you update SP3 installed on the XP machine?

  3. have you made changes on the computer recently?

  Method 1.

  Step 1.

  Plug the USB device into another computer and check if the device works on this computer.

  Step 2.

  Plug another USB device and check if this device works on this computer.

  Step 3.

  You can connect the HDD on another USB port and check.

  Method 2.

  I suggest you follow the steps in this article.

  A computer that is running Windows XP cannot detect a USB flash drive, an iPod from Apple or an external hard drive: http://support.microsoft.com/kb/925196

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 how to back up and restore the registry in Windows

  My drive does not appear in Windows Explorer: http://support.Microsoft.com/kb/330140

  Refer.

  Advanced troubleshooting tips for General USB in Windows XP problems: http://support.microsoft.com/kb/310575

  Why my computer doesn't detect my new USB device when I run Windows XP: http://support.microsoft.com/kb/314634

  "There is no disk in the drive. Insert a disk in drive \Device\hard disk\Dr1"Error Message When you start your computer: http://support.microsoft.com/kb/330137

  I hope this helps.

• When you access the virtual machine, getting the error "encountered an error when you try to use one of its virtual hard disks". Help?

  I received the "low disk space error" on a hard drive of the virtual machine dynamic expanding. I have increased my space of virtual hard disk using "My Computer" > manage > storage > "Disk management" and choose "Attach VHD" then resizing to max available (64 GB), and now I can not start the virtual machine. It gives the error: encountered an error when you try to use one of its virtual hard disks. Help?

  Hi NatalieFoster,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums to get help:

  Windows 7 Virtual PC and XP Mode TechNet Forums

• Error when you try to run an application that worked when built with 8.6

  I have a simple program that I wrote in the 8.6 version that I've never had a problem generation and execution of applications built with it to 8.6.  Two weeks ago, I got 2009 by mail because we had very recently purchased 8.6 and I get errors when you try to run an application built with the same code using 2009.  The error relates to the Mean.vi.  He claims that he can't find it.  The error I get is as follows:

  Error loading VI 'NI_AALBase.lvlib:Mean.vi '.  LabVIEW support 3 error code: could not load façade.  I don't have access to the front panel of this vi, so I wonder if there is a problem with the runtime and not my code.  Please answer as soon as possible because it will quickly start to the impact of my calendar.  Thank you.

  Hello!

  The same problem ?

  I talked with my local OR technical support team. The application now works without any problem.

  Rule of thumb: when creating a Setup program do not forget that the option "Run Time Engine xxxx" in the category "Other installers" is selected despite the fact that the runtime is already installed.

  Best regards.

• get error when you try to lower the java load error 1-4 of 4 0 x 80070643.

  get error when you try to lower the java load error 1-4 of 4 0 x 80070643.

  This forum is for Microsoft Security Essentials.

  You question is with Oracle Java.

  It is recommended to go to www.oracle.com to get help.

• HTTP 503 error when you try to deploy the project in Visual Studio

  I get a http 503 error when you try to deploy a project in Visual Studio-SQL Server 2005. What this mean and how can I solve this problem?

  Hello

  I suggest you refer to the following msdn link for the fix for the problem.

  http://msdn.Microsoft.com/en-us/vstudio/aa718325

• Windows7 64 I get C646 error when you try to install KB982331

  In Windows7 64 I get C646 error when you try to install the update of security KB982331.  I tried Windows update and download it directly.

  Hello

  Here's what I recommend you do:

  1. Tower of AUC. Down comes the restrictions - turn it off completely.
  2 restart your computer for the change to take effect.
  3 re - download the update of security for Microsoft Office System 2007 (KB982331) from the link below:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=7f89a734-cda4-4abb-9a10-f6dfe560e8d0&displaylang=en
  4. install. It should work fine.
  5. If it still does not work, try to open all or part of your MS Office applications (such as MS Word, MS Excel, etc.).
  6. follow step 3.

  Let me know your results.

• code 80070017 error when you try to downland microsoft office service pack 2 on vista

  code 80070017 error when you try to download microsoft office service pack 2 for vista

  0 X 80070017-2147024873 - ERROR_CRC
  Data error (cyclic redundancy check).

  This problem may occur if there is a failure of control of cyclic redundancy (CRC) check during the update process. This failure can occur if the received file is not the file that is expected by Windows Update

  Run the Chkdsk.exe tool to check the drive for errors

  If this does not help, then manually download the update you need and see if that fixes the problem.

  Description of 2007 Microsoft Office Suite Service Pack 2 (SP2) and of Microsoft Office Language Pack 2007 SP2
  http://support.Microsoft.com/kb/953195 TaurArian [MVP] 2005-2010 - Update Services

• Windows XP SP3: Access denied error when you try to change the beginning upward in MS CONFIG. Director of applications but I am the administrator.

  original title: access denied errors when you try to change the beginning upward in xp sr CIP 3 msconfig. I am the administrator, please the administrator

  I am a user with privileges under windows xp pro service PAC 3. I recently received an access denied error message acusing me of not being the administrator when I tried to limit the start up programs in msconfig. What should I do these changes in safe mode?

  You have scanned your system for malware? It seems its infected with something. Download ccleaner install / run. Then go to tools / startup. Delete the entries that you want here

• Error when you try to install the software update of tax

  It is for the HR Block Tax software,

  Update installs successfully on the XP machine, but on windows 7, I get this

  "Windows Installer does not allow patching of managed advertised products. At least one characteristic of the product must be installed before applying the patch.

  I made sure that it is running as an administrator. Tried to use the previous version of windows. Still lost.

  Google and seems that it may occur with other programs as well. Have not found a solution very clear.

  Hello Joslinm,

  1. do you get this error when you try to install any other application?

  I suggest that you contact the H & R support and check if the application is compatible with Windows 7. Here is a link you can follow to contact support:

  http://www.hrblock.com/support/index.html

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• msncon.dll Outlook 2010 error when you try to open outlook

  msncon.dll Outlook 2010 error when you try to open outlook

  Outlook:

   

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  http://answers.Microsoft.com/en-us/Office/ee861097.aspx

  Outlook Help Forums at the link above.

  They will help you with your Outlook questions when repost you in the Office Forums above.

  See you soon.

  Mick Murphy - Microsoft partner

• Network error when you try to read from C:\Windows\Installer\iTunes.msi

  Original title: error when you try to install iTunes on Windows Vista
  I am trying to install the latest version of iTunes available in South Africa. I use Vista to the Windows Welcome page.

  I downloaded the itTunessetup.exe file, but when I try to run the installation, I get the same message "network error when you try to read from C:\Windows\Installer\iTunes.msi.
  I am at a loss to understand this - I'm not much of a PC expert either.
  Any suggestions? Thank you

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question. I suggest you follow the troubleshooting steps to check if this may help.

  Method 1:
  Run the fix it and check.
  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/program_install_and_uninstall

  Method 2:
  You can completely uninstall older versions of iTunes installed on the computer, then I suggest you to install the latest version and check.
  Download link

  http://www.Apple.com/iTunes/download/
  
  Method 3:
  You can try the form as follows article knowledge base and check if you are able to install iTunes.
  Problem installing iTunes or QuickTime for Windows
  http://support.Apple.com/kb/HT1926

  Reference link:
  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
  http://support.Apple.com/kb/HT1923

  If the problem persists then you can contact iTunes support: http://www.apple.com/support/itunes/
  Just reply with the results. I'd be happy to help you more

• Continually, I get an error when you try to update KB968930

  Continually, I get an error when you try to update the following: Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista (KB968930) I tried the solutions provided and it still does not work.  What can I do?.

  Both are optional, non-security updates - don't hesitate to hide them.

• Error 0 x 00000643 error when you try to install a Kodak wireless printer. When tried to install the wireless printer is located and ready to install, I get a PnPx device then error

  Error 0 x 00000643 error when you try to install a Kodak wireless printer. When tried to install the wireless printer, wireless printer is ready to install I get a PnPx device Microsoft authorization. Runs like it is installing then error is presented. I tried fixit did not work... Frustrated

  You could settle on a previous installation. Try this:

  Go to your device manager and see if you have an old installation of the printer and right click Uninstall. You can also check if there is an old facility of the printer in Control Panel, printers, right click and delete it. Install the printer using the Add Printer Wizard. If it fails again with the same error, go to Device Manager right click on the name of your computer, click on "Scan for harware changes". He must find the printer and install it. Now you can check your printer if its work. If this does not work, please indicate your model of printer on your next reply.

  Open the Device Manager
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager