Network error when you try to read from C:\Windows\Installer\iTunes.msi

Original title: error when you try to install iTunes on Windows Vista
I am trying to install the latest version of iTunes available in South Africa. I use Vista to the Windows Welcome page.

I downloaded the itTunessetup.exe file, but when I try to run the installation, I get the same message "network error when you try to read from C:\Windows\Installer\iTunes.msi.
I am at a loss to understand this - I'm not much of a PC expert either.
Any suggestions? Thank you
Advertisement

Hello

Thanks for posting in the Microsoft community!
You have reached the right forum for your question. I suggest you follow the troubleshooting steps to check if this may help.

Method 1:
Run the fix it and check.
Solve problems with programs that cannot be installed or uninstalled

http://support.Microsoft.com/mats/program_install_and_uninstall

Method 2:
You can completely uninstall older versions of iTunes installed on the computer, then I suggest you to install the latest version and check.
Download link


Method 3:
You can try the form as follows article knowledge base and check if you are able to install iTunes.
Problem installing iTunes or QuickTime for Windows
http://support.Apple.com/kb/HT1926

Reference link:
Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.Apple.com/kb/HT1923

If the problem persists then you can contact iTunes support: http://www.apple.com/support/itunes/
Just reply with the results. I'd be happy to help you more

Tags: Windows

Similar Questions

  • Error 1316: a network error has occurred trying to read from C:\windows\installer\KasperskyPURE.msi

    Tried to uninstall KaperskyPURE2.0 in order to install Kaspersky 2013 and get the above message.   Running Windows 7. Thank you.

    [Moved from comments]

    There are once again this darn echo...

  • any copy forbidden error when you try to watch HBO in windows media center.

    I get all copying prohibited error when you try to watch HBO in windows media center. It seems that my PlayReady is corrupt. Whenever I try to update game ready to go in Media Center, it fails. I tried uninstalling and reinstalling PlayReady. Said again he must udpate, and always fails. Can someone at Microsoft PLEASE Playready works. It drives me crazy,

    These steps 1

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/PlayReady-update-was-incomplete/8119d0a8-6106-489D-B5CB-4979a6a9ad0e

    Still did not work.

    Then did it

    (5) download http://go.microsoft.com/fwlink?LinkId=105000 ResetDRM.exe

    (6) using winrar or winzip to extract files to ResetDRM.exe (ADVPACK. DLL CleanDRM.exe resetdrm.inf) to a temporary folder. ResetDRM does not work by itself on Windows 8 in any compatibility mode so you MUST check out it

    (7) use the Explorer to find cmd.exe to C:\Windows\System32

    (8) right click on cmd.exe and "run as Administrator".

    (9) cd to the temporary folder where you extracted ResetDRM.exe

    (10) run "CleanDRM.exe - v". A text window opens after a few seconds and check that several files have been deleted. If there is an error that a resource could not be opened for exclusive access, you may need to reboot and try again after making sure that Media Center does not start automatically

    Reset. Now works. Wow what a PITA.

    I think that it was all caused by have to swap disks.

    PlayReady my % $# ^ & $% ^ [email protected] #.

    I would mark this as an answer, but I don't see a button for that now, (fact)

  • Script error when you try to print from Windows mail to HP1012: P3200 prints well

    I use Vista Windows Mail and have done for many years without any problems. All of a sudden when I try to print from the window of e-mail for my HP1012 I get a script error message. Printing from Windows Mail on my HP3210 still works fine.

    Any suggestions?

    IE9 is not compatible with Vista Windows Mail. Maybe that's what you see.

  • Error when you try to print from web depending on program.

    When I try to print from a program based on the web that I use at work (called Innfusion) I get an error saying microsoft:

    Windows Presentation Foundation Terminal Server print W has encountered an error and needs to close.

    I have no problem printing from another program. I can also save these documents in PDF format and email it to me without any problems printing documents once they arrive in my Inbox.

    I tried the update of .net Framework; I also uninstalled and reinstalled Service Pack 3 - no luck.

    Any help is very appreciated.

    When I try to print from a program based on the web that I use at work (called Innfusion) I get an error saying microsoft:

    Windows Presentation Foundation Terminal Server print W has encountered an error and needs to close.

    I have no problem printing from another program. I can also save these documents in PDF format and email it to me without any problems printing documents once they arrive in my Inbox.

    I tried the update of .net Framework; I also uninstalled and reinstalled Service Pack 3 - no luck.

    Any help is very appreciated.

    See these:

    http://support.Microsoft.com/kb/2021394

    http://social.technet.Microsoft.com/forums/en-us/winserverTS/thread/3eda7a79-7294-46de-b3e3-2d78d2cc980c

    There is more where that came out: Google

  • error message when you try to print from the windows photo gallery

    I can't print the Windows Photo Gallery photos: failure of the Document to print - load plain paper.  I reloaded paper, updated printer drivers and called Dell technical support, who said it was a software isue since I can print other documents as well as photos from Photoshop Elements. I get the same message when I try to print from painting and the image viewer. Looks like a problem of microsoft.
    My printer is Dell V515w and is 4 months old.
    Even if I can use Photoshop Elements, it is easier to use the Windows Photo Gallery.  Any ideas?
    Thank you
    Richn13

    Hello
    See this link:
    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/unable-to-print-only-one-page-in-a-multiple-page/737b4afc-0D0E-4cb8-8374-f6de218720b2

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/trouble-printing-from-Windows-Photo-Gallery/456cc8bf-9791-4619-82e2-de121deec9d3

    Let us know if it helps.

  • Network error when you try to download a project on a Z10

    Hello.

    I'm having a problem to download a BlackBerry World project.

    The thing is that I created a Web launcher for my application with Webworks and sandbox in the supplier portal in a draft State so that I can download on the Z10 and test it before the release. When I'm in the BB world in developer mode and enter the SKU/project ID, found but when I click on download an error appears saying "Network error" and "a network error occurred while processing your request. Please check that you have enough coverage, and try again."

    This is the second project for the same application I the sandbox. The first was ok when I downloaded it and I have downloaded and tested without any problem. But with this one I get this error.

    Any ideas?

    Thanks in advance.

    Hi all

    This issue should now be resolved.

    -Jordan

  • error when you try to synchronize from 5.1 to 5.5

    Hi, I just installed and configured a vCO 5.5 Linux appliance. At this moment we have some 5.1 devices running our PRD environment. When I try to sync anything from 5.1 to 5.5 5.5 to 5.1 (traction) I get the following error:

    org.springframework.remoting.remoteaccessexception: could not access http calling remote service to [https://IPOF5.1vCO:8281/vco/webremoting/vcofactory.service];

    nested exception is org.apache.http.nohttpresponseexception: did not receive http response successful;

    The only other odd thing I noticed is that when I set up the 5.5 server it only let me implement IP addresses rather than DNS names for all areas requiring such information. For example, when you configure authentication I tried to put in the DNS name of our DCs for example dcname.domain.com, but has not. Once I put the IP address in instead he succeeded immediately.

    Thank you!

    5.5 there are a few changes on communication protocols. vCO 5.5 uses HTTP and it's why synchronization is not supported between version 5.5 and higher.
    Syncronization will be transferred to an another vCO 5.5.

  • IO error when you try to read SD cards more

    I have a PC Compaq FS7600 I bought in December 2005.  I have Windows XP Home Edition V 2002, Service Pack 3.  I have McAfee Anti Virus software installed and running.  The problem I have is that I wanted to use a 16 or 32 GB SD card to save my files.

    My PC will read the old cards SD 1 GB or 2 but will read not the greatest.  It gives me an i/o error.  Can I download something that will make the computer to recognize larger storage devices, or should I bite the bullet and buy a new PC?

    Thank you!

    On Sunday, July 1st, 2012 16:57:53 + 0000, jltrinsatx wrote:

    My PC will read the old cards SD 1 GB or 2 but will read not the greatest.  It gives me an i/o error.  Can I download something that will make the computer to recognize larger storage devices, or should I bite the bullet and buy a new PC?

    No, you certainly don't need to buy a new PC.

    An SD card, that is 4GB or more is called a SDHC card, not a SD card
    card. No doubt your read card is an SD player, not a player SDHC.

    You have two choices:

    1. buy a SDHC reader and replace the one in your computer by the
    a new.

    2 buy a USB SDHC reader and use that instead of the built-in player.

    The second choice is very expensive (as little as $ 1.71 US to places)
    like Amazon.com) and very easy to use, so you might prefer it. Instead
    having to open your case and replace a hardware component, all you
    need to do is plug the USB drive when you want to use.

    Ken Blake, Microsoft MVP

  • Windows Media Player error when you try to read the file: error downloading codec

    Yesterday, I got no sound and video, today I have sound but no video.  What is happening with this?

    I updated my drivers and now the video does not work.  I use Windows Media Player c. 9.00.00.4510.  When I click on read the file, in the black bar at the bottom ready it flashes very fast "error downloading codec".  Before I updated the drivers, I got the video with no sound.  Where this codec disappeared to?   How can I get that back?

    I have updates for the 9 Series Player and I'm happy with it.  If I move up to 10 or 11, codecs and drivers will work with it automatically or will I have the same problem?

    OS: Windows XP sp3

    Thanks for any help, Cdee.

    Hi CDEKV,

    Check to see if the following is useful.

    Method 1: Follow the steps in the below article mentioned to see if it helps.

    How to Download Codecs automatically in Windows Media for Windows XP player

    Method 2: Install the Codec Installation Package to check the issue.

    Download details: Codec Installation Package

    Method 3: Upgrade to the latest version of Media Player.

    Download Windows Media Player - Microsoft Windows

  • network error when you try to load the Messenger. Can help out you in line/Tech support

    Why can't I load the new version of live messenger? Why my hard drive does not start a DVD disc or data automatically when placed in player?

    Hello
     
     
    The question you have posted is related to Windows Live Messenger and would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the best support.
     
  • Windows Install Cleanup Tool error when you try to install it on Windows Vista Business

    After a failed installation of Adobe CS 4 on my Windows Vista Business 32-bit system, I am now unable to update or uninstall anything Adobe on my PC. I had read several forums, Adobe specifically, when users suggested to install and use the Windows Installer Clean up tool.  I have successfully used this app in the past with Windows XP, but when I try to install on my Vista box cleaning tool I am immediately presented with the error:

    Windows Script Host: There is no script engine for file extension ".vbs".

    Does anyone know a solution for this?  I tried hunting one down a few months ago, but could not find something that solved this problem.  Or are the users of Vista GROUND just when it comes to this cleanup tool? I want desperately to remove/repair my Adobe products (which work, but cannot be updated) without the need to make a nuclear weapon and to open and lose time reloading of each piece of software, to restore the profiles of boards, etc...

    Hello NMITGuy,

    You can view the following information about the error: there is no script engine for file extension ".vbs".
    http://www.Winhelponline.com/blog/error-there-is-no-script-engine-for-file-extension-when-running-vbs-files/

    Please let us know if that helps.

    Thank you

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Error when you try to play a DVD: Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

    Windows Media Player help

    I bought a netbook and have an external CD drive to dvd. When I want to play the video, I get this error.  I can't find a solution.  Any Advisor.  Error is... Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

    Hi Rains27,
     
    1. were you able to play the same DVD sooner?
    2. must arrive with a particular DVD or all of them?
    3. do you have a DVD decoder installed on your computer?
    4. you use starter edition of windows 7?
    5. What is the resolution on your computer?
    6. have you installed a codec on your computer?
    If you have installed a codec on your computer the I suggest you to uninstall the codec.
     
    Method 1:
    Try running Windows Media Player DVD Troubleshooter utility and check if this may help:
     
    Open the troubleshooting Windows Media Player DVD Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click
     
    Troubleshooting, click View all, and then click Windows Media Player DVD.
    http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter
     
    Method 2:


    Method 3:

    Try to reduce the hardware acceleration again and check if it makes a difference.
     
    a. open the screen resolution by clicking the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.
    b. click on advanced settings, troubleshoot tab and then click on change settings.
    c. move the hardware acceleration slider toward none to reduce or turn off video hardware acceleration.
    d. click OK and then click Restart now.

    For more information, see this link: thanks and regards:
    I. Suuresh Kumar - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Network error when you try to update

    I have the Acer Iconia A200, game of Google tablet, I don't know what else you need for the info but I'm trying to make sure that it is updated. It has become very slow. When I go to check the software updates I get the message: "network - network coverage coverage is currently low. Please move to a location with better coverage to continue. "I had full signal and still not received the same error. I did a restore to factory on it and went through the installation process and still not received the same error. I can get online, download games, etc. I look at things like Netflix or whatever it is, it of extremely slow and takes a long time to load. I brought the tablet to work today to see if it's maybe just something with my WIFI. I logged on the network it and I still get the same error of network coverage. Help, please!

    OK thanks a lot for your help IronFly!

  • Error when you try to play audio files: Windows Media Player has encountered a problem reading the file. for further assistance, click web help

    8007007E tips

    There is also another number which is C00D11B1, but both have to do with the lock of the music in windows media player, the message said:-"Windows media player has encountered a problem reading the file; for help click web help. ""- and that of all, but when ' web help ' click on the show numbers that are 8007007E and C00D11B1 and average music, not Windows media player, y at - it someone with the same problem that has been able to solve? Thank you, let me know, if you don't mind, thank you again.

    I suggest re-download you WMP 11 from the following link and install it on top of the current installation:

    http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1d224714-e238-4E45-8668-5166114010ca

    Who help me?

    If this isn't the case, please report the file type (extension) of the file you are trying to play. For instructions on how to make Windows Explorer shows the file types, see this link:

    http://www.windowsreference.com/Windows-XP/how-to-view-all-file-extensions-in-Windows-XP

Maybe you are looking for