error when you try to save the .ai file
Hello
I created a business card in Adobe Illustrator CS2 and now I want to change my email address on the map. I did this and tried to save it, but when I made this error message came:
"There is no path.
I don't know why it does this. I want to be able to edit and save more later on if need be then, how can I fix? Ideas, any help would be greatly appreciated. Thank you!
ashmic19
Check your paths of old type, retype you the original line on or did you press return back on the orig line until there was nothing out there, created a new line of text and type in the new address?
That's what I think might happen watch in work/overview.
Try to Clean up, remove unused marks.
Also check your hard drive, you're out of space?
Tags: Illustrator
Similar Questions
-
Error when you try to insert the bitmap file
Hello!
I have a problem with the symbol editor in Multisim 11. When I try to insert a bitmap the entire program crashes.
I would like to have the symbol Opamp in multisim. See: http://commons.wikimedia.org/wiki/File:Normsymbol_OPV.svg
How can I do this?
Thank you!
mikcon
Hi Mikcon,
I have install Multisim 11.0 take your symbol and resize it and saved as a bitmap.
Then I opened the component wizard and try to create a new component with your symbol of OPV and everything works fine without errors or accidents.
Here some screenshots for you:
So most likely your Multisim Installation is corrupted.
Please try to repair your Multisim and again test this issue.
Kind regards
Oleg Scherling, mengg | Engineering applications. National Instruments | NIG. | -
I created an html page of cinema at home with links to movies on my hard drive. I have two types of links or href = 'file:///C:/Media/movies/Looney Tunes/MainMovie/Vol 1 Disc 3/VIDEO_TS/VIDEO_TS. IFO' for normal DVD or href = "file:///C:/Media/movies/Blu-ray/Lorax/mkv/THE_LORAX/THE_LORAX.Title800.mkv" for blu - ray. Both have worked fine (click on the link and the movie starts to play with Media Player Home Cinema) for a few years until what I recently upgraded to firefox. The .ifo files still open as usual, but now blu - ray links take me to a gray page that says "Video cannot be read because the daughter is corrupt" with a large "X" over it. If I open the html page in Internet Explorer and click on the link, it works very well (blu - ray opens by using Media Player Home Cinema). Also, if I directly open the .mkv files, they play very well (open using MPHC). Thanks for any help!
Change your links to include the attribute type with the value of video/x-matroska . Example:
<a type="video/x-matroska" href="file:///C:/My%20Videos/Cooking/Making%20Gingerbread.mkv">How to make gingerbread</a>
I also used to get the same behavior with files from web sites, when I had the extension of InlineDisposition installed.
-
Error when you try to save the PDF in Acrobat Pro
I hope this is the correct community to post this question.
I have a PDF file. When I go on record as another / reduce size PDF, I get this message: Please check if you have permission to write to this location and have enough disk space.
I have a lot of disk space, and it's my computer, so approval is a given... Any suggestions as to what will help?
Thank you.
Wonderful. In fact, I have saved the file, made some changes and was able to record that I wanted to. Thank you
-
Error 'UID without owner referenced. ' UID: U3020 class: ImageItem "when you try to save the site Muse CC converted in 2014 of the Muse
It works very well in my CC version. But will not let me save my old site. Everything I do is open and it says converted and record that it won't do anything and I tried everything
I suspect that you have purchased the model 'AgencyVisual.muse' of the forest of theme? It seems that this file contains minor corruption which requires repair by the development team. We have tried to contact the author of the model to see that the original model is repaired, but have not yet received any response.
If you send your .muse file to [email protected] as well as a link to this topic, we can repair the file and return it to you.
-
get error when you try to lower the java load error 1-4 of 4 0 x 80070643.
get error when you try to lower the java load error 1-4 of 4 0 x 80070643.
This forum is for Microsoft Security Essentials.
You question is with Oracle Java.
It is recommended to go to www.oracle.com to get help.
-
original title: access denied errors when you try to change the beginning upward in xp sr CIP 3 msconfig. I am the administrator, please the administrator
I am a user with privileges under windows xp pro service PAC 3. I recently received an access denied error message acusing me of not being the administrator when I tried to limit the start up programs in msconfig. What should I do these changes in safe mode?
You have scanned your system for malware? It seems its infected with something. Download ccleaner install / run. Then go to tools / startup. Delete the entries that you want here
-
Get 800b0100 error when you try to install the update KB905866 (Mail filter spam for x 64 systems). It keeps failing even though I followed the steps all the recommended (in aid) and installed some other stuff. Tried several times but nothing helped. I saw a recommendation to install a Wups2.dll file but do not know if I should do it because the recommendation is for Windows XP and I have Vista Home.
Hello
I suggest check the link below and try do a SFC (System File Checker) scan and check if it helps.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
I would also say that you reset Windows update components and check if this may help.
How to reset the Windows Update components?
-
Error when you try to play the game: memory access violation
memory access violation
I have redownloaded a game that has been previously loaded on my computer, now I get this error when you try to play the game "Memory Access Violation".
Your sound card that is more than adequate.
If the game was previously installed and worked fine then maybe it is not been completely uninstalled.
I suggest you uninstall the game, look in the registry for any left over entries that can refer to the game.Then restart and reinstall the game.
Alternatively, you can try to install in compatibility mode. If the program is not compatible, then you try to install and run the program in compatibility mode.
Use the following steps:
(1) right click on the program
2) click Properties
3) click on the Compatibility tab
(4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.Check out the link here: make sure to run older programs in this version of Windows
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-WindowsLet us know if that helps.
Marilyn
-
I am trying to set up Parental controls for the user account of my son and I get the following error: error when you try to set the Parental control 'Unable to set settings for administrators user or unknown users.
I tried to use the administrator account.
When I ran the System File Check sfc/scannow
TI completed indicating certain files may be damaged and cannot be repaired and check the convertible bonds. LOG file.
How can I know which files are corrupted.
Any other Suggestions on how to fix this user profile? Do I have a profile that I don't know?
Hi wimuggss,Step 1: Disable UAC (User Account Control) and check the result
See How can I change the behavior of user account control by using the cursor?Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.Important: Enable UAC after you complete the steps.Step 2: If the problem persists, try to set the parental control in safe mode and check the result. If you are able to apply settings in safe mode, this means that some program is causing this problem, mainly the security software.
See Start your computer in safe modeKind regards
Syed - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Lightroom will stop when you try to save the image to the Gallery
Lightroom will stop when you try to save the image to the gallery. It just stops without warning. And he always seems to be synchronization?
I have a Huawei p7 Please help!
Hi AnnCicilie,
Make sure that if the application is up to date.
If this does not help, could you please share the newspapers of diagnosis by PM so that we can check more?
Follow these steps to collect logs:
- Open Mobile with Lightroom application
- Click on the LR icon at the top left:
- Press and hold the Lr icon at the top left that mentions your Adobe ID and click on generate Diagnostic log
- Send email to yourself so that you have them on the desktop and then, share with me by PM
Concerning
Claes
-
Disabled-Adobe Acrobat 9 Pro on old PC. Implementation error when you try to install the new PC. "Invalid serial number."
Please see the following documents.
Let us know if that helps.
-
Error when you try to view the application latencies
I'm not able to get see Planner to latencies report application series of tests with multiple virtual machines in them. If I run a test that has 3-2 VMs in it while I'm able to view the results of the trial very well, however when I try to run tests with more of that I get errors when I try to view the results. When I try to load the web page results to see Planner, nothing happens, and I get the following error in viewplanner.log:
2012-10-24 20:16:13, 025 INFO {}Unhandled errorTraceback (most recent call changed):File "/ usr/lib/python2.6/site-packages/twisted/web/http.py", line 773, requestReceivedSelf.Process)File "/ usr/lib/python2.6/site-packages/twisted/web/server.py", line 127, processSelf.Render (resrc)File "/ usr/lib/python2.6/site-packages/twisted/web/server.py", line 147, in renderingbody = resrc.render (self)File "/ usr/lib/python2.6/site-packages/txjsonrpc/web/jsonrpc.py", line 112, rendering() defer.maybeDeferred(function,_*args).addErrback-< exception that is caught here >-File "/ usr/lib/python2.6/site-packages/twisted/internet/defer.py", line 133, in maybeDeferredresult = f (* args, * kw)File "/ tmp/ViewPlanner/web_interface.py", line 527, jsonrpc_getResultsMapFile "/ tmp/ViewPlanner/mysql_interface.py", line 571, in getTestAveragesexceptions. KeyError: 0When I try to manually execute the python script statement, it tells me that there is no result for the test.
I just ran a test locally with 276 VMs, according to viewplanner.log, all 276 VMs transferred their results to the device. Yet I still get this error when you try to view the results.
I tried to create new images GoldenDesktop and GoldenClient, as well as deployed a new device see Planner and reinstalled all of its agent programs, nothing helps. Anyone know what could be the cause?
We have seen this issue for large series and I attach a patch file that you can overwrite the/root/ViewPlanner harness directory and then restart the vdiappd service, and then you can give it a try.
For manual results extratcion by using the report.pyc script, you must use '-j' I ' and '-j' operations if you ran just 1 iteration of the workload.
-
Problems of conversion of PDF to MS Word document. I managed to convert 4 files and now the subsequent files generate a "Conversion failed" error when you try to convert the file. I have a big manuscript and I separated each chapter to help the conversion; as I said, the first 4 pieces without problem, then the conversion failure. I tried to convert the document integer and same result. Specifically, I bought the feature export to Word. Please help. I had initially export the Word Perfect PDF document and attempting to pass PDF to MS Word.
Hi sdr2014,
I'm sorry to hear that your conversion process is at a standstill. It seems that the problem is not specific to a single file, you have been unable to convert anything, since the first four chapters of a correct conversion.
So, let's try this:
If you want to convert via the ExportPDF site, please sign out, clear the browser cache, and then reconnect. If you use the drive, please choose Help > updates to ensure that you have installed the latest version.
Please let us know how it goes.
Best,
Sara
-
Error when you try to install the browser first elements 10 Inspiration
On the Adobe Premiere elements 10 welcome screen, I get an error when you try to install the browser of Inspiration (IB).
Sorry, an error occurred.
This application cannot be installed because this installer has been misconfigured. Please contact theauthor of the support application.
I have uninstalled/reinstalled the latest Adobe Air. I have connected to photoshop.com while trying to install IB as well.
OS = Windows 7 64 bit
Adobe products installed
Photshop CS5
Lightroom 3.5
Thank you
The team and I worked to create this document on the issue. Can you try the solutions listed and see if it solves the problem?
Can not launch/install Inspiration browser from the home screen. First 10 items | Win 64 bit
http://kb2.Adobe.com/CPS/926/cpsid_92680.html
-Dave
Maybe you are looking for
-
When I open the Firefox browser a normal icon appears for a few moments and then is replaced by a link to a video. When I played the video it shows two young women shopping and a young man talking on his cell phone comes and seems to describe the cho
-
ADC inforation with UART for Labview
Hello I'm tryin to send a voltage of environ.2 v of CDA on my MCP3903 Board with microchip dspic33f. I am able to communicate with labview by UART, but not able to get the sine wave I hope. I'm not sure how the data are plotted as if just garabage or
-
I just bought a hp a6750f with 750 GB HDD 8 GB memory, quad processor works great, but it fills slowly with stuff 2 or 3 concerts a day, I think it's to get it online, CV Tech took control and just delete the temporary files, that is not the problem.
-
BlackBerry smartphones to organize videos into folders BB 9720
Just a a 9720 - on my micro SD memory card, photos and videos are arranged in folders on the card - as seen if I look at the map in "files" on the phone, or when connected to my PC in 'Windows explorer '. On my old 9320 Phone showed those files and y
-
I've upgraded to windows 7 from windows vista. is someone can you please tell me what should I do to open the XLR/WPS files in windows 7. any info is greatly appreciated. Thank you