Error, while trying to deploy an application using the DB adapter

Similar Questions

• Windows updates fails, get "Error 1327 Invalid Drive/M" error when trying to install updates by using the stand-alone packages.

  Original title: I deleted the files from automatic update and windows update keeps trying to install

  I've done an update for a long time on an old computer unused spare XP and Windows Update said that he had to update a large number of files, so I have left to download and install.  Once the 45 updates completed, I rebooted as instructed and proceeded to clean a lot of old data.  Apparently I deleted (7) files for Office M/S that must be installed, because the Winows Update icon in the status bar telling me I had 7 sto update to install.

  Now Win Update always tells me that the files should be updated and starts the process, telling me that they are already downloaded, but it fails every time because they are not where they should be, as I deleted them without meaning to.  How can I do the update for these startup files, or where can I get the appropriate files to allow the update work properly?

  Yes, I know it was stupid, but this is the frist time that I asked for help from Windows 3.1, so I don't feel too bad.

  I have download the individual Ko * .exe files support, but get an error 1327 Invalid drive / M error whenever I try to install one of them.

  Thank you

  Paul

  You receive an "Error 80070643" error message when you try to update Office 2003 by using Software Update Services
  http://support.Microsoft.com/kb/903772

  Have you ever used registry cleaners?

  Notes in my old an assignment by Peter Foldes (long ago)-

  '0 x 80070643 error '.

  Use the following fix below. Please post back with results

  subkeys to rename 1 Office

  Note: Remove the following registry keys may reset customized user
  settings for your Microsoft Office programs.

  1. close all applications.
  2. click on start-> run, type regedit, and click OK.
  3. Locate and select the following registry subkeys:

  HKEY_CURRENT_USER\Software\Microsoft\Office\11.0
  HKEY_LOCAL_MACHINE\Software\Microsoft\Office\11.0

  4. right click on 11.0 and rename them in Old11.
  5. close the registry editor.

  2. detect and repair Office 2003

  1. on the Windows taskbar, click Start, point and click Control Panel.
  2. double-click on Add/Remove programs.
  3. click on change/remove programs in the left pane.
  4. Select Microsoft Office Professional Edition 2003 in the right pane, and then click on edit.
  5. Insert the correct CD version when she needs.
  6. Select "Reinstall and repair" and click Next.
  7. Select "detect and repair errors in my Office installation".
  8. click on install and wait for the process to end.

  3. install the updates
  --
  Peter '.

• Get the 500 error trying to create a table using the REST API

  Hello

  I tried to create a table using the REST API for Business Intelligence Cloud, but I got 500 Internal Server Error for a while now.

  Here are the details that I use to create a table.

  

  and the json to create the schema that I use is

  [{'Nullable': [false], 'defaultValue': 'dataType' [null],: ['VARCHAR'], 'precision': [0], 'length': [18], 'columnName': ["ROWID"]}]

  , {'Nullable': [true], 'defaultValue': 'dataType' [null],: ['VARCHAR'], 'precision': [0], 'length': [18], 'columnName': ['RELATIONID']},

  {'Nullable': [true], 'defaultValue': 'dataType' [null],: ['VARCHAR'], 'precision': [0], 'length': [18], 'columnName': ['ID']}

  , {'Nullable': [true], 'defaultValue': 'dataType' [null],: ['TIMESTAMP'], 'precision': [0], 'length': [0], 'columnName': ['RESPONDEDDATE']},

  {'Nullable': [true], 'defaultValue': 'dataType' [null],: ['VARCHAR'], 'precision': [0], 'length': [255], 'columnName': ['RESPONSE']},

  {'Nullable': [false], 'defaultValue': 'dataType' [null],: ['TIMESTAMP'], 'precision': [0], 'length': [0], 'columnName': ['SYS_CREATEDDATE']},

  {'Nullable': [false], 'defaultValue': 'dataType' [null],: ['VARCHAR'], 'precision': [0], 'length': [18], 'columnName': ['SYS_CREATEDBYID']},

  {'Nullable': [false], 'defaultValue': 'dataType' [null],: ['TIMESTAMP'], 'precision': [0], 'length': [0], 'columnName': ['SYS_LASTMODIFIEDDATE']},

  {'Nullable': [false], 'defaultValue': 'dataType' [null],: ['VARCHAR'], 'precision': [0], 'length': [18], 'columnName': ['SYS_LASTMODIFIEDBYID']},

  {'Nullable': [false], 'defaultValue': 'dataType' [null],: ['TIMESTAMP'], 'precision': [0], 'length': [0], 'columnName': ['SYS_SYSTEMMODSTAMP']},

  {'Nullable': [false], 'defaultValue': 'dataType' [null],: ['VARCHAR'], 'precision': [0], 'length': [10], 'columnName': ['SYS_ISDELETED']},

  [{'Nullable': [true], 'defaultValue': 'dataType' [null],: ['VARCHAR'], 'precision': [0], 'length': [50], 'columnName': ['TYPE']}]

  I tried this using postman and code, but I always get the following response error:

  Error 500 - Internal server error

  Of RFC 2068 Hypertext Transfer Protocol - HTTP/1.1: 10.5.1 500 internal Server Error The server encountered an unexpected condition which prevented him from meeting the demand.

  I am able to 'get' existing table schemas, delete the tables, but I'm not able to make put them and post operations. Can someone help me to identify the problem, if there is no fault in my approach.

  Thank you

  Romaric

  I managed to create a table successfully using the API - the only thing I see in your JSON which is different from mine is that you have square brackets around your values JSON where I have not. Here is my CURL request and extract my JSON file (named createtable.txt in the same directory as my CURL executable):

  curl u [email protected]: password UPDATED h x ' X-ID-TENANT-NAME: tenantname ' h ' Content-Type: application/json '-binary data @createtable.txt https://businessintell-tenantname.analytics.us2.oraclecloud.com/dataload/v1/tables/TABLE_TO_CREATE k

  [

  {

  'columnName': 'ID',

  'dataType': 'DECIMAL ',.

  'Length': 20,.

  "accuracy": 0.

  'Nullable': false

  },

  {

  'columnName': 'NAME',

  'dataType': 'VARCHAR ',.

  'Length': 20,.

  "accuracy": 0.

  'Nullable': true

  },

  {

  "columnName': 'STATUS."

  'dataType': 'VARCHAR ',.

  'Length': 20,.

  "accuracy": 0.

  'Nullable': true

  },

  {

  "columnName': 'CREATED_DATE."

  'dataType': 'TIMESTAMP '.

  'Length': 20,.

  "accuracy": 0.

  'Nullable': true

  },

  {

  'columnName': 'UPDATED_DATE ',.

  'dataType': 'TIMESTAMP '.

  'Length': 20,.

  "accuracy": 0.

  'Nullable': true

  }

  ]

• Get the 49 error while trying to download Photoshop CC. Retry does not resolve the problem.

  Using Creative Cloud getting 49 error while trying to download Photoshop CC. Retry problem persists. Other downloads for other correct programs.

  Dave,

  When you try to download a creative cloud application, you receive one of the following errors:
  Error - 60, error 49 error 201, 205, 206, 207, error 403 error error error

  Or when you try to download and apply a patch, you receive one of the following errors:

  U43M1D200, U43M1D204, U43M1D205, U43M1D207, U43M1D214,

  Please see this link: download, installation error or update creative Cloud applications.

  Guinot

• "There was an error while trying to delete the snapshot"

  I am running VMware Fusion on a 10.5.7 and when I try to delete the old clichés I get this error

  "There was an error while trying to delete the snapshot

  Impossible to clean deleted files:

  The specified virtual disk needs to be repaired.

  It's the performance of FreeBSD. The server has no harm actually run but gets big enough and I would like to clean it up a bit. Any suggestions?

  Thank you very much

  MacGruder says:

  I am running VMware Fusion on a 10.5.7 and when I try to delete the old clichés I get this error

  "There was an error while trying to delete the snapshot

  Impossible to clean deleted files:

  The specified virtual disk needs to be repaired.

  It's the performance of FreeBSD. The server has no harm actually run but gets big enough and I would like to clean it up a bit. Any suggestions?

  Firstly it goes without saying, but I'll say it anyway...  Always back up all of the Virtual Machine with the Virtual Machine within the OS, not suspended, and Fusion to stop closed before trying to make repairs on a virtual hard disk.

  This may not work if it's the basic disk that needs to be repaired and the Virtual Machine has snapshots, but I go through it.  You can try to use "/ Library/Application Support/VMware Fusion/vmware-vdiskmanager ' with the '-r' option.  Note: If the basic disk do not while snapshots are at stake, because it will cause more problems so my suggestion is first try to create a new basic without snapshots disk using the information below (see another option).

  Also one of the reasons to delete a snapshot may fail if there is no adequate free disk space for the operation ends so make sure you have a lot of free disk space.

  Another option would be to create a new basic disk, and then use dd by using an Image of CD/DVD/ISO Linux Live in the image of the old drive so written delta in snapshots to a new basic disk.

  I like to use the ISO Image of KNOPPIX_V5.1.1CD - 2007-01-04 - IN .iso to start the Virtual Machine and use dd to leave because it works well with VMware SCSI virtual hard disks.

  Also in Fusion 2.x, configuration the target Virtual Machine's .vmx file must be changed manually to have the present following parameters when using Knoppix.

  usb:0.deviceType = "mouse"
  usb:0.present = "FALSE"
  mouse.vusb.enable = "FALSE"
  

  Note: The first two parameters may already exist but if the other exists and is set to true, then set it to FALSE and the third are probably already so just add it.

• Why I get this error message: error while trying to synchronize audio and midi?

  I just updated Logic Pro and all of a sudden my lexicon alpha interface does not work correctly.  I get this error message: error while trying to synchronize audio and midi. Check for conflicts between Logic Pro and the external device. Help

  Start by making sure that the project in logic settings are set correctly - I think that the lexicon only supports 44.1 or 48.

  If it is software used to Setup place the lexicon make sure you that the sampling frequency is set to the same logic.

  Sometimes that power and the lexicon solves the problem...

  If none of the help above - make sure you use a multi-out or comprehensive audio device (OS X)

  

• Get a permissions error while trying to open Adobe illustrator "to work properly, Adobe Illustrator requires the permission of folder preferences to" reading / writing ".» The current permission setting is incorrectly set to "read only".

  Get a permissions error while trying to open Adobe illustrator "to work properly, Adobe Illustrator requires the permission of folder preferences to" reading / writing ".» The current permission setting is incorrectly set to "read only".

  I put permissions in the preferences and on hard drive - the same error.

  What is a current version of CC (CC2015.2.1) or an earlier version. Your best bet may be uninstalled, run the cleanup tool (Google it) and reinstall.

• Runtime error while trying to run prgram sample Login.java in order to establish the connection to the Hyperion workspace

  Hello

  I was able to set up compilation SDK and successfully the example program Login.java. But while trying to run it I get the following error: Please help me solve this problem.

  com.sqribe.rm.ReportMartException:GsmNotFound
  at com.sqribe.rm.SessionImpl.convertError (unknown Source)
  at com.sqribe.rm.AASessionImpl.open (unknown Source)
  at com.sqribe.rm.AASessionImpl.internalInit (unknown Source)
  to com.sqribe.rm.AASessionImpl. (Unknown source)
  at com.sqribe.rm.SessionFactory.getInstance (unknown Source)
  When connecting. (Login.java:28)
  at Login.main (Login.java:69)

  Hello

  Check if the GSM service is running. Also check if the user is able to access the workspace without any problem.

  Thank you

  Nirmala

• The podcast is not included in the iTunes Store podcast directory. An error occurred while trying to play an episode of the podcast

  I submitted my podcast feed to iTunes Connect three times. It shows the same error: the podcast is not included in the iTunes Store podcast directory. An error occurred trying to play an episode of the podcast.

  I can't find anything wrong with my workflow. It is validated. I subscribed it to iTunes as Apple suggested in the email. It works as well in iTunes.

  Some argue, there should be at least three ready episode in animal feed. I only have three. What is the problem? Can someone help me? Thank you!

  It comes to my diet:

  http://aizhe.FM/feed/episodes

  I checked the power supply in Podcasts connect and validated it and says "ready for submission. It validates in CastFeedValidator;

  However when you subscribe to iTunes the main episodes in animal feed, E000 (i.e. only Apple controls) downloaded only to half way and then stopped - although on the subscription again, it worked OK. These strange kinds of glitches happen sometimes, and maybe that's what caused the problem. I should try to submit it again and see what happens. (You do not have to have three episodes in the power - one is enough).

• Impossible to deploy my application on the Simulator more

  Since there are 4 days, I can't deploy and run my application on the Simulator more, I get this message all the time:

  Failure of deployment: Info: request shipment: install and launch
  Info: Action: install and launch
  News: Native debugging: on
  Info: File size: 482774
  Info: Installing eir.bb10.CorporateContacts.testDev_ateContacts1e5ecb89...
  Info: Treatment 482774 bytes

  What could be the problem? I later use NDK, reinstalled all, using 3 different simulators, including the most recent, but without success.

  I'd appreciate any help. It is very annoying, because I can't do any work and ship expected app updates, I face the environment of dev for 4 days! I have worked on many platforms and with many different tools, but I've never experienced anything like this.

  Thanks for the reply!

  I managed to get things running in a similar way. I uninstalled everything, including the NDK and start over. I returned to VMWare Player v.4. I work mainly with outdated Simulator, we run the fastest for me, although later runs now too.

  Yet EACH deployment on a Simulator takes several attempts, I don't remember when was the last time that the deployed application and runs correctly on the first attempt. I also change the download settings, switching between 'install bar' and 'clean install', these two works more often for me. Another thing to try in the meantime is to go for debugging directly, if the race does not...

  It is a terrible experience and it's very laborious, as I end up losing most of my time trying to run my application on the Simulator, instead of productive coding. Sorry BlackBerry, but it's worse that develop for Android, iOS, Windows Phone, Java ME... I develop for these systems and has never had any topic also with any of them.

  One of the reasons for the app started working again maybe do something with the code, because it contained errors, but the construction still successfully passed and they never showed me any error message in the IDE or in the Simulator. Anyway, I'll never know if my code had something to do with the cause of the problem, because the 'hack' held an older VM etc. But I write this so that people know that it can theoretically hinder deployment too.

• Problem installation AutoVue - deployment of application in the field has failed;

  Full of the error:

  Deployment of application in the field has failed; Deployment error - Exception has occurred in the javax.xml.ws.WebServiceException of wsgen process: cannot create JAXBContext deployment error - Exception has occurred in the javax.xml.ws.WebServiceException of wsgen process: cannot create JAXBContext.

  Sun GlassFish Enterprise Server v2.1.1

  This error occurs when == > http://localhost:4848 / | Console mgt GlassFish 2.1.1 | Web applications | Deploy | Web application, AutoVueWS.war

  
  

  Background:

  I am an Adobe Flex coder threw in a Silverlight project, trying to get a JavaBean to work.

  My task is to get a DGN file to display in my Silverlight application. I tried to fix this using AutoVue as a web service returns an image and displaying this image on my control. This, of course works fine on the last machine of developers. However, I've been totally failed to install on the client server. I have no real idea of what I'm doing with the GlassFish/Java/AutoVue for this project section. Any help would be greatly appreciated

  
  

  -I have have Glassfish installed v2.1.1 and seems to work correctly.

  -I used it C:\Program Files (x86)\Java\jdk1.7.0_21\bin\jar.exe' cvf - AutoVueWS.war - C AutoVueWS.

  to compile the war file.

  -Server = Pro, 2 GB, Windows 7 64-bit * Virtual Machine
  

  Post edited by: 6bf38c5b-5aea-4186-9e77-bf1326cfd283

  New "6bf38c5b-5aea-4186-9e77-bf1326cfd283," Hi

  If all you need to AutoVue for is the conversion of an input format (for example, DGN) in a PNG image format, so yes, it's a case of using the AutoVue Web Services API (more precisely "convert it" Web Service). In this case, you should proceed with the question of GlassFish forums so they can help solve the deployment problem.

  However, depending on how you obtained your Silverlight solution implemented, it might be even more efficient/transparent to avoid the conversion completely process and simply stir the applet AutoVue in the interface of your solution. In this case, users would see their files (in whatever format or DGN) directly within the AutoVue applet, and you can customize the user interface of applet according to the needs (in terms of menus/toolbars tools/etc). If this is of interest to you, check out the Guide of AutoVue API at http://docs.oracle.com/cd/E37436_01/otn/pdf/E37455_01.pdf

  And to answer your last question - no, there is no way to communicate directly with the server of AutoVue. The AutoVue API and the API of Services Web AutoVue are the two APIs on the client side.

  Thank you

  Graham

• VI Analyzer in an application using the built

  I have an application which is designed for a continuous integration server.  This application uses the VI Analyzer API (Labview 2009 for the moment) to run a series of tests on a case of the screws.  The problem is that when the program is run like VI all is happy, that the folder is added using the 'Add VIAn Item.vi' and the task runs on the four VI in the folder.  But when the VI is built and comes as an exe file, 'VIAn Add Item.vi' appears to add the folder but no vi is analyzed and if a specific VI is given then error 53 is thrown by "NI_FileType.lvlib:Get leader Type.vi.  Is it just a case of not being able to use the VI Analyzer API in a built application that is running as an exe?  I have attached the front panel of the application built after he was executed and the rear panel of the source code in question; There is more that the rest is just to determine the paths to analyze.

  The VI Analyzer API is not supported in a built EXE.

• an error occurred trying to rename a file in the destination directory code 5

  When I try the installed software on this time its error getting
  ; an error occurred trying to rename a file in the destination directory code 5

  Hi Sissi,

  1. What is the full error message do you get?

  2. This only happens when you try to install a particular program?

  3. using the administrator account?

  Step 1:

  You can try to take ownership of the file or the folder and check.

  How to capture a file or a folder in Windows

  Step 2:

  I also suggest you temporarily disable the antivirus software third and firewall on the computer and check to see if that fixes the problem.

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.

  Note: Make sure that you enable the antivirus software, other security and firewall after the test programs.

• I am trying to perform a recovery using the "HP Recovery Manager", but I don't know what I should choose to do so.

  Update Code error 80070490

  There, I had a update failed on Windows Vista Service Pack 2 (KB948465).  I tried the Mr. fix it, but the execution software failed.  Some time later, I'm now at the point where all of the updates fail and gives me the error code 80070490.  I tried the system tool - didn't work.  My computer is preinstalled with vista home premium, so I have no disks.  I am trying to perform a recovery using the "HP Recovery Manager", but I don't know what I should choose to do so.  Choose 'The essential system updates for Microsoft Vista SP 1'?  If so, he wants that I uninstall first.  How can I do this?

  Hello

  For any questions about the HP recovery process, contact HP.

  Here is their Web site about this link:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

  This is the Microsoft Information about your error code 0 x 80070490

  'You receive a "0 x 80070490" error code when you use Microsoft Update or Windows Update Web sites to install updates'

  http://support.Microsoft.com/kb/958044

  To make the Installation of repair upgrade in the Microsoft link, borrow Microsoft Vista DVD a friend.

  Here is the information on how to do it:

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

• I'm trying to publish my site using the Publish drop and the FTP host option.

  I'm trying to publish my site using the Publish drop and the FTP host option. I enter the details requested and all it gives me, it is an error message of "could not sign you [suite failed to read].» Check your user name and password'. I'm the host my site on One.com. There is no place for me to choose the 20 port (although it should use anyway) and I have spent hours on the design of Web sites and do not want to go to waste. I use a trial version but Adobe say he has all the features of the paid version, which, at this rate, I will not get! I've updated the app 12 days ago. Csomeone help?

  As the error says it's a problem with the user name and password. If your host requires that you use port 20 just add: 20 at the end of your address of the remote host.

  For example: yourRemoteHost.com:20