Error with action on the part of the CDA of AW OLAP in OBIEE

Similar Questions

• Status.msi error with installation of the hp officejet 6500 E709n wireless

  It's frustrating.

  "I tried to install a full print driver software for my portable printer wireless hp officejet 6500 E709n and even if I can complete the process, I get this error message: the component you are trying to use is on a network unavailable resource.

  When I click 'OK', I get a "status: the path..." OK6500vE709_Full_14\setup\status\status.msi could not be found. »

  I then get a third message that appears each time you start to the top of my computer hp laptop dv6871us: "Please wait while Windows configures the status.  And... It's constantly repeated ad nauseam.

  How can I find the status.msi file and stop this endless loop of error messages?

  TX

  Yes, it's very good information.  Thank you to be thorough to me.  I actually had this happen to me personally on my Windows XP and printer Photosmart older (different error message but even constant pop up).  I could easily (but a lot of time, I might add) fix my problem of:

  1. uninstall the printer from Add/Remove programs.

  2. run cleaning disc of all programs > Accessories > system tools > disk cleanup.

  3 restart the PC.

  4 selection of a backup in CCleaner system option and then cleaning the registry using this tool. Click here and carefully read the reviews in CNET and opt to download the tool to see what I mean.

  5. restart the PC again.

  6. can download and install my printer on the site, but in your case, here are the drivers and the software feature full Officejet 6500 Wireless (the link is for the version of Windows 7 32-bit PC U.S.).

  This can become very difficult at times, so I want to provide this very comprehensive document from HP which covers your exact error message and their favorite not to try.  Mine are a little easier but a 'tad - little' more risky because I provided a link to a specific 3rd registry part cleaner that you use at your discretion (there are others out there).  I like it because I can back up my system first in the case where that something else has been removed should not have been.  I don't have that happen, fortunately.  Please read this document as well just to be on the safe side.  I'm here to help (do not do worse) so let me know if I need to explain something better, but I think that you have everything you need here to start.

  -Theresolution of the MSI boot errors-

  Let me know how it goes!

• Error with motion in the OracleDataAdapter

  I have the following query:
  
  < code > SELECT FI. FACILITY_OID, FI. FACILITY_NUMBER, FI. FACILITY_NAME, FI. TYPE_CODE,
  SCI DESCRIPTION AS TYPE_CODE_DESCRIPTION, FI. SUB_CATEGORY_CODE, SCC.NAME AS CATEGORY_CODE_DESCRIPTION,
  FI. HEADWALL_TYPE, FI. EXTERNAL_LENGTH, FI. EXTERNAL_WIDTH,
  FI. INTERNAL_LENGTH, FI. INTERNAL_WIDTH, FI. FRONT_BARRICADED,
  FI. INTERNAL_VOLUME, FI. FRAG_CONTAINED, FI. PORT_FACIL_EXCEPTION,
  FI. REINFORCED_OPENINGS, FI. SINGLE_AIRCRAFT
  OF FACILITY_INFO FI INNER JOIN TYPE_CODE TC ON FI. TYPE_CODE = TC. TYPE_CODE
  INNER JOIN SUB_CATEGORY_CODE ON FI CSC. SUB_CATEGORY_CODE = CSC. SUB_CATEGORY_CODE
  WHERE FI. TYPE_CODE ('ECM', 'AGA', 'REM', 'OSM', 'EOL')
  AND FI. INSTALLATION_ID = 1000 </postcode >
  
  The query works fine when I run it in the window of SQL command of the tool of web management OracleXE database, but when I try to use the query in the method OracleDataAdapter.FillSchema, I get the error:
  
  System.InvalidOperationException occurred
  Message = "Syntax Error: Expecting ',' or 'WHERE' (etc.) after table alias.'"
  Source = "System.Data.OracleClient"
  
  If I jump the FillSchema method and simply call Adapter.Fill it works very well - the query is run and the data is returned. So I drop just the call to Adapter.FillSchema, but I suspect that someone put this call for a reason and he will be missed I have just come out. :)
  
  Anyone got any indication of what is happening?

  Maybe delete the ANSI syntax would be beneficial?

  SELECT
     FI.FACILITY_OID                        ,
     FI.FACILITY_NUMBER                     ,
     FI.FACILITY_NAME                       ,
     FI.TYPE_CODE                           ,
     TC.DESCRIPTION AS TYPE_CODE_DESCRIPTION,
     FI.SUB_CATEGORY_CODE                   ,
     SCC.NAME AS CATEGORY_CODE_DESCRIPTION  ,
     FI.HEADWALL_TYPE                       ,
     FI.EXTERNAL_LENGTH                     ,
     FI.EXTERNAL_WIDTH                      ,
     FI.INTERNAL_LENGTH                     ,
     FI.INTERNAL_WIDTH                      ,
     FI.FRONT_BARRICADED                    ,
     FI.INTERNAL_VOLUME                     ,
     FI.FRAG_CONTAINED                      ,
     FI.PORT_FACIL_EXCEPTION                ,
     FI.REINFORCED_OPENINGS                 ,
     FI.SINGLE_AIRCRAFT
  FROM
     FACILITY_INFO     FI
     TYPE_CODE         TC,
     SUB_CATEGORY_CODE SCC
  WHERE
     FI.TYPE_CODE       IN ('ECM', 'AGM', 'REM', 'OSM', 'EOL')
  AND
     FI.INSTALLATION_ID = 1000
  AND
     FI.TYPE_CODE = TC.TYPE_CODE
  AND
     FI.SUB_CATEGORY_CODE = SCC.SUB_CATEGORY_CODE   
  

• I receive a notice indicating that there are errors with some of the files on the server during the launch of the site

  I publish the site in HTML and then upload using FTP software.

  The reason is that I change the lines < body > to automatically resize the onLoad of the page.

  I just start getting a pop-up window when the site launches who says:

  Some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists, please contact Web site author.

  Any idea what's going on?

  Thank you

  Have you read the cited document as Vivek? "Some files on the server may be missing or incorrect" Warning Message>

  Home.css on your server file is a different version of your site as the home.html file. They must be synchronized for the page to be guaranteed to work properly.

• Error of graphics in the Menu bar on G5 with 10.5.8

  Hi friends Mac: on a PPC G5 dual 2 GHz (8 GB of RAM, ATI RADEON 9600 Pro Card) following problem: after you have reinstalled the 10.5.6 DVD 10.5.6 system 2Z691-6327-A 10 times, then run the Combo update to 10.5.8 the same error: open the menus of preferences system, Time Machine and preview, but I just see a white rectangular area no graphics. Have found no error with disk utility, the error just before and after the combo update, the PRAM resetting has not helped, no other problems with the machine. Have deleted files pref, checked with preferential treatment - no problem. All necessessary fonts are here. I don't have disk Warrior. The facility is clean, zero of installed additional programs. Does anyone know what I can do? If I could access the system from the terminal prefs I could live with it. Thank you very much!

  You have repaired permissions twice in a row and rebooted yet?

• Fatal error with insertion of PDF in Excel

  I work invoices for my general business through Microsoft Excel.

  Generally, I stick a digital receipt of Home Depot that I receive in my email that is a PDF via the insertion of an object.

  All of a sudden I get a fatal error with something in the sense of 'the instruction at 0 x 000000054 0x5e60d3c7 memory cannot be read.

  
  

  I tried to date/reinstall the drive, but I do not understand why it started to happen suddenly. Can someone guide me in the possible fixes for this error?

  Thank you

  

  Hi lukeh23197419,

  Could you please tell me which version of the operating system you are using.

  Please open Reader and try to disable the Protected Mode under ' Edit > preferences > (protection) "and see if that helps.

  Let me know how it goes.

  Kind regards

  Ana Maria

• Error-124102 when the action on the download

  I use action on download put some files on target RT. When I use the reference of the action on the download, all results of action by error-124102. Refrence seems to be valid, when I cast to I16, the value is 1.

  But if I open the session manually (with user IP name and admin), using session open, everything works correctly, I use the same paths etc. The session opened manually reference value is 2.

  Someone at - it work?

  SP1 VS 2015

  It is resolved already, I was using prefix /files/ with relative paths. Without this prefix, all functions working properly.

• How reslove an error with the dbms_redefinition.start_redef_table command?

  Command:

  BEGIN

  () DBMS_REDEFINITION.start_redef_table

  uname = > "kiku"

  orig_table = > 'pletest3_pn_kiku_api_db ',.

  int_table = > 'pletest4_pn_kiku_api_db');

  END;

  Error:

  Error report:

  ORA-12008: error path refresh materialized view

  ORA-14400: inserted partition key is not mapped with any partition

  ORA-06512: at "SYS." DBMS_REDEFINITION", line 50

  ORA-06512: at "SYS." DBMS_REDEFINITION", line 1343

  ORA-06512: at line 2

  12008 00000 - "error in the path of refresh materialized view.

  * Cause: Table SNAP$ _ < mview_name > reads lines of sight

  MVIEW$ _ < mview_name >, which is a view of the main table

  (the master can be on a remote site).  Any

  error in this way will cause this error when updating.

  For updates of the Rapids, the table < master_owner >. MLOG$ _ < master >

  is also referenced.

  * Action: Examine the other messages on the stack to find the problem.

  See if SNAP objects $ _ < mview_name >, MVIEW$ _ < mview_name >.

  < mowner >. < master > @ < dblink >, < mowner >. MLOG$ _ < master > @ < dblink >

  There is always.

  How reslove an error with the dbms_redefinition.start_redef_table command?

  As I said before, this may be reproduced if the intermediate table is not created correctly.

  SQL> --My database version.
  SQL> ----------------------
  SQL> SELECT * FROM v$version;
  
  BANNER
  --------------------------------------------------------------------------------
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  PL/SQL Release 11.2.0.1.0 - Production
  CORE    11.2.0.1.0      Production
  TNS for Linux: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production
  
  SQL> ed
  Wrote file afiedt.buf
  
    1  CREATE TABLE not_partitioned_tbl AS
    2*  SELECT object_id,object_name,created,owner FROM all_objects
  SQL> /
  
  Table created.
  
  SQL> ALTER TABLE not_partitioned_tbl ADD CONSTRAINT not_partitioned_tbl_pk PRIMARY KEY (object_id);
  
  Table altered.
  
  SQL> CREATE INDEX npt_created ON not_partitioned_tbl(created);
  
  Index created.
  
  SQL> EXECUTE DBMS_STATS.gather_table_stats('SCOTT','NOT_PARTITIONED_TBL',cascade=>true);
  
  PL/SQL procedure successfully completed.
  

  Now, I create the staging table without MAXPARTITION, so not all "created" dates cannot be mapped.

  SQL> ed
  Wrote file afiedt.buf
  
    1  CREATE TABLE partitioned_tbl (object_id NUMBER, object_name VARCHAR2(30), created DATE, owner VARCHAR2(30))
    2      PARTITION BY RANGE (created)
    3      (PARTITION pt_2005 VALUES LESS THAN (to_date('01/01/2006','dd/mm/rrrr')),
    4       PARTITION pt_2006 VALUES LESS THAN (to_date('01/01/2007','dd/mm/rrrr')),
    5       PARTITION pt_2007 VALUES LESS THAN (to_date('01/01/2008','dd/mm/rrrr'))
    6      --PARTITION pt_rest VALUES LESS THAN (MAXVALUE) -- Maxpartition  is commented out intentionally.
    7*     )
  SQL> /
  
  Table created.
  
  SQL> EXEC DBMS_REDEFINITION.can_redef_table('SCOTT','NOT_PARTITIONED_TBL');
  
  PL/SQL procedure successfully completed.
  
  SQL> conn sys as sysdba
  Enter password:
  Connected.
  SQL> ed
  Wrote file afiedt.buf
  
    1  BEGIN
    2     DBMS_REDEFINITION.start_redef_table('SCOTT','NOT_PARTITIONED_TBL','PARTITIONED_TBL');
    3* END;
  SQL> /
  BEGIN
  *
  ERROR at line 1:
  ORA-12008: error in materialized view refresh path
  ORA-14400: inserted partition key does not map to any partition
  ORA-06512: at "SYS.DBMS_REDEFINITION", line 52
  ORA-06512: at "SYS.DBMS_REDEFINITION", line 1646
  ORA-06512: at line 2
  
  SQL>
  

• Someone else to get errors 'droplets could not communicate with Photoshop"since the upgrade to LR2015 CC and CC 2015 PS on Windows?

  Someone else to get errors 'droplets could not communicate with Photoshop"since the upgrade to LR2015 CC and CC 2015 PS on Windows?

  I have a droplet which stretches from digimarc on my images.  Its working well for the past 2 years.  However the most recent upgrade to LR2015CC and PS2015CC its broken.  I did go back and manually install the digimarc plug-in (because it is no longer installed by default) in PS 2015 CC.  The drop works well when it is run within PS2015 CC however when I try to run it as part of "Post-processing, after export" in CC LR2015 I now get an error message "droplets could not communicate with Photoshop.  It worked in the latest versions of LR and Psalm

  Anyone have this same problem?   It is a technique of very popular workflow for those of us who use digimarc.  I wonder if anyone else has encountered this and has a fix.

  Thank you

  Work around is to install the OLD PS CC2014 and restart the computer.  Then it magically connects to CC2015 PS without errors.

• Popup error when using the AJAX or update Action for the region or a State

  Hello

  I had a problem with an application that I developed and I was banging my head against the wall with this for some time without success. Several pages in my application rely on the use of AJAX to refresh a region on the page with the updated data, running every 5 seconds. I have the following code in the foot in my region:

  var refresh_region = function (region_in) {
      try {
          jQuery(region_in).trigger('apexrefresh');
      } catch (e) {
          //Suppress error messages
      } finally {
          setTimeout(function() {refresh_region(region_in)}, 5000);
      }
  }
  refresh_region('##REGION_STATIC_ID#');
  
  
  

  What is happening is that I often have a popup with the title "Message from Web page:" and one of the descriptions following error (with the last being the most common):

  • : Error - HTTP Version not supported
  • Error: error - unknown

  The problem is that this page is used on the kiosks without keyboard, and once the error popup is displayed, the page continues to answer and user interaction to click on the Ok"" button. Another question, which is even more frustrating, is that these windows will accumulate above the other nearly one hundred sometimes profoundly, to the point where, sometimes, I need to force, exit the browser or restart the kiosk. There are also cases where the entire application stops responding and none of the pages will load. The only way to solve this problem is to have my DBA restart Glassfish. He went through some of the papers, but he sees nothing specific that helps him understand why he keeps to himself, but he believes that all these popups eat connections until the server runs.

  This has been a recurring topic since the app went live and I had hoped that with the help of a block try {} catch {} would prevent these popups errors but no luck. I also made a copy of the page today and refresh moved dynamic Action using the timer plugin but the popup always appears. I am following up to see if it happens more often than the AJAX approach.

  In the end, there are two issues here:

  1. What causes the error in the first place?
  2. How can I prevent the error popup windows until I can find #1

  I have tried everything I can find online to disable popups, all of this without a bit of luck:

  • Using try {} catch {}
  • Disable script debugging in Internet Explorer
  • Uncheck 'display a notification of every script error '.
  • Catch the window.onerror event

  Does anyone have any suggestions on how I can avoid these popups?

  I have a copy of the application on apex.oracle.com:

  • Workspace: SCCC_TEST
  • User/Pass: TEST/test
  • Page: 5

  Thank you!

  Once I started to think the ajax Manager that I started, I was wondering if ajax would actually raise an error at all, and it is not just the success of shooting when but throwing an error because it cannot handle the return (error page html for example). I'm not sure.

  You can try to use this code, which will replace the current call and will call _Appel with your own parameters. _Appel is a private member is not accessible so it's probably the best alternative. Not really a hack in my book. The structure is in place, then why not.

  //preserve original function
  var asw_orig = apex.server.widget;
  //override existing function
  apex.server.widget = function(pName, pData, pOptions){
    var lOpts = pOptions;
    //set the error handler function
    lOpts.error = function(){alert("this is my error handler function");};
    //pass along the variables to the original call
    asw_orig(pName, pData, lOpts);
  };
  

  I wondered if maybe the session may have expired at a certain time and therefor, you found these errors, because the update is not aware of this and therefore makes invalid calls. Just throw something out there.

• Help with dynamic action and the selection list item

  G ' Day Apex gurus.
  
  I have problems trying to achieve to trigger the Help window from an element automatically select. A Help window is triggered when it is clicked on the label of an item, but my customer wants to be triguered automatically as soon as the user clicks to view the options in the select list.
  
  I think I should be able to do with dynamic actions but I can't function.
  
  I know when someone clicks on the label of the item selection list trigger this JavaScript
  
  JavaScript:popupFieldHelp('277938589795252851','1545903379570909')
  
  So I want to trigger the javascript also when the user click on the item selection list and pull down the options and for that I think that the dynamic action is the way to go, but I can't do things.
  
  That's what I have to do:
  
  I created a dynamic option as follows:
  
  Name: test
  Sequence: 30
  Even: click
  Selection type: product (s)
  Article (s): P1_RATING <-a selection list item
  Condtion: - no requirement.
  
  Real Actions
  Sequence: 10
  Action: Run the JavaScript Code
  Fires when the result of the event is: true
  Fire on loading the page: checked
  Code: javascript:popupFieldHelp('277938589795252851','1545903379570909')
  
  Thank you anyone who can tell me what I'm doing wrong here or bring a solution to my problem to trigger the Help window from an element automatically select.
  
  Kind regards
  Carlos

  Hi Carlos,

  I've set up a test case of exactly in the same way and it worked fine for me. I've created a page element called P1_DA_DEMO and added some values of the static selection list, then added a help text. I used the settings are lower, I suggest you try again, but also make sure that you have no other Javascript errors on the page. Use a tool like firebug to check.

  Name: Action Dynamics demo
  Sequence: 10
  Even: click
  Selection type: product (s)
  Product (s): P1_DA_DEMO<- a="" selection="" list="">
  Condtion: - no requirement.

  Real Actions
  Sequence: 10
  Action: Run the JavaScript Code
  Fires when the result of the event is: true
  Fire on loading the page: unchecked
  Code: javascript:popupFieldHelp('277938589795252851','1545903379570909')

  Scope of the event set a Bind s.

  Thank you

  Paul

• Dynamic action - defining the value of affected parts

  Hello
  
  I'm a little trouble trying to set the value of several items affected in dynamic Action (refresh the number of the part to Page 2). Page 2 I want the user to select the order number and fill in the items combines automatically, for example part number Descr. I can make it work for Part_Number, but the same value appears when I add P2_DESCR to items assigned to set the value. I'm probably doing something really stupid!
  
  http://Apex.Oracle.com/pls/Apex/f?p=11536:2
  
  Kind regards
  
  Mickey

  Hi Mickey,

  It is not as easy as it should be, even. You certainly do not make something stupid at all!

  Currently the action 'Set value' support only 1 distinct value. You might have other 'Action' within the same dynamic action that returns the other element you want, but it's inefficient, you need to make 2 round trips to the server to retrieve each value. We are looking for the opportunity to put multiple values without needing more trips to go back out of the box in a future release, but for now I think the best approach is to use a custom mix of dynamic measurements, JavaScript and a level of page AJAX callback.

  For this example, I use the EMP table, where the user selects the number and the name of the employee and employment are returned, but the technique can be used for your situation.
  

  
  
  1. Add a page 'AJAX Callback' called 'GET_EMP_INFO', make the type "PL/SQL" with a "Point of process" of "On Demand - run this process when requested by AJAX ' and add the following code:

     begin
         for c in (select ename, job from emp where EMPNO = to_number(:P1_EMPNO)) loop
          apex_util.set_session_state('P1_ENAME', c.ename);
             apex_util.set_session_state('P1_JOB', c.job);
             /* Add more set_session_state calls here if you want to return more item values */
         end loop;
         apex_util.json_from_items('P1_ENAME:P1_JOB');  /* Add more here for returning more values */
     end;
     

  2. Create a dynamic action "Advanced" (because we need to use the action "Run JavaScript Code"), with the following attributes:
     
     
     
     • 'Change' - to the fire of the dynamic action every time the number value used change event.
     
     
     • Selection of Type 'Article (s)' - to be able to select the element of page employee number.
     
     
     • Article (s) "P1_EMPNO" - the page employee number element.
     
     
     • Real Action "to execute JavaScript Code. If you want details on the loading of the page as well, make sure that the 'Fire when loading the Page' checkbox is checked. Add the following "Code":

       var get = new htmldb_Get(null, $v('pFlowId'), 'APPLICATION_PROCESS=GET_EMP_INFO', $v('pFlowStepId'));
       get.add('P1_EMPNO', $v('P1_EMPNO'));
       gReturn = get.get();
       json_SetItems(gReturn)
       get = null;
       

     
     
     
     
  
  
  
  So, basically, that's all. I recommend this approach for now, until better support us in native mode to set multiple values, or a plug-in dynamic action arises that does just that!

  Hope that helps.

  Kind regards
  Anthony.

• task of ant clientgen in error with the URL of the WSDL

  I am using weblogic 8.1
  
  I assembled and deployed my service web and make of error trying to generate the client code by using the task clientgen Ant and the WSDL URL.
  
  I want to use URL WSDL to generate the client code so that I can validate my WSDL file also.
  
  What is the reason behind this error, is there something missing in my .ear file or my deployment is missing someghing?
  
  ASSEMBLY
  < target name = "ear" depends = "compile" >
  < servicegen
  destEar="${staging.dir}/${service.name}.ear".
  contextURI = "${contextURI}" >
  < service
  javaClassComponents = "${package.name/}. ${service.name} '"
  targetNamespace = "http://www.bea.com/webservices/basic/statelesSession."
  serviceName = "${service.name} '"
  serviceURI = "/ ${service.name} '"
  generateTypes = 'True '.
  expandMethods = "True" / >
  < classpath >
  < pathelement path = "${staging.dir}" / > "
  < / classpath >
  < / servicegen >
  < / target >
  
  DEPLOY
  < target name = "deploy" >
  < wldeploy
  action = "deploy".
  adminurl="http://${host.name}:${port}.
  User = "${WL." User} ".
  Password = "${WL.pwd}" "
  target = "admin_dmwls".
  source = "${Staging.dir} / ${service." "Name} .ear" / >
  < / target >
  
  CLIENTGEN
  < target name = "gclient" >
  < clientgen wsdl = "kuldeep / http://ffstestmisws02.nat.bt.com:61069 / MyFirstService?" WSLD.
  packageName = 'clientpkg. '
  clientJar="${staging.dir}/${service.name}_client.jar"/ >
  < / target >

  Hi Kuldeep,

  The question is: http://localhost:61069/WebService/MyFirstService? WSLD

  
  
  A correct should be
  "http://localhost:61069/WebService/MyFirstService? WSDL.

  Correct the spelling of WSDL in your task of Clientgen just...

  In reality the incorrect spelling of "WSDL" is the origin of the problem...
  weblogic.webservice.tools.wsdlp.WSDLParseException [clientgen]: could not retrieve the WSDL of the Web service / http://localhost:7001 / MyFirstServiceImpl? WSLD. Please check the URL and make sure that it is an XML file valid [java.io.IOException: error:weblogic.xml.stream.XMLStreamException: line: 255 '=' expected, got float [62] - with the nested exception:]
  [clientgen] [[Error on line: 255 col: 47 line: 255 '=' expected, got float [62]]]

  Thank you
  Jay SenSharma
  http://jaysensharma.WordPress.com

• An error with Firefox to manage the box of Pandora/DMX

  With the latest version of Firefox, I now have the following error code when it is tempting to connect to the controller based on the web for hardware DMX boxes used to run Pandora for businesses: sec_error_extension_value_invalid

  Previously, Firefox would provide an invalid certificate warning of security with the ability to proceed; by choosing to continue, the login page of material would be then responsible. Now the error is received and the Palestinian occupied territory of page never loads.

  Firefox can still access other hardware devices with webmail (routers, WAP, etc) with the warnings invalid ever normal, which suggests that the problem may be partially or entirely a problem with the firmware of the DMX/Pandora box (I'm not yet had the opportunity to see if there is a firmware update for hardware that could solve the problem).

  Current versions of Chrome, Internet Explorer, Opera and Safari will load the login page of the material after the confirmation to proceed after an invalid certificate warning.

  It seems that the problem has been resolved in Firefox version 33.1.

• Action of 'Reply with template' missing the Message filters choice "perform these Actions."

  Hello

  I just installed the latest version of Mozilla Thunderbird (24.4.0) and I am trying to create a "vacation response." I read on Mozilla's Support site:

  Another option is to create a message filter and respond to all incoming messages with a model.

  (see https://support.mozilla.org/en-US/kb/vacation-response?esab=a & s = out + of + the + office & r = 3 & as = s )

  I created a template and saved, and then I tried to create a message filter. However, there is no option for "Reply with template" in the list of choices for the action to perform. I see choices of action, for "Copy Message To", "move the Message to ' and"Forward Message To", but not"answer with model.

  Why is it missing and how to get what it appears?

  Thank you for helping.

  Hi sfhowes,

  I think I knew what is happening.

  First of all, I am a new user of Thunderbird. I have been using e-mail program from Apple on my Mac for many years. Since the upgrade to Maverick, his remark that the Mac mail program is unstable sometimes causing my Mac to freeze, sometimes lose my ability to change windows desktop, and slow clumsy scrolling problems in the e-mail program, but also the temporary e-mail program freeze.

  I installed the latest version of Thunderbird this weekend and am just become familiar with it. I have configured all 8 of my email accounts and they all worked very well. Then I added the Conversations module and I wanted to be able to rearrange the order of my eight accounts and found that Folderpane Tools was the ticket and it worked... had not noticed it was only up to 23... but it worked on 24.

  I said incorrectly that the Folderpanes changed the way that my folder pane displays things. It's the Conversation that made... FolderPane Tools let me reorganize and that's all. But information changed the way the things that have been presented in that in records added to organize by inboxes, sent, trash, etc. And models was one of these records, he added.

  Being unfamiliar with the models as I'm new to Thunderbird. Here is what happened. I created a message and saved as a template. I didn't realize that it was married to a particular account. And when I looked at the file of models I do not remember to see a subfolder for the specific account, for which the model was.

  After reading your last email that I removed the two add and my accounts appears in the folders pane as they did originally, most notable was the Inbox and folders of model disappeared.

  I tried to create a filter for a specific account and the problem remains, but I was wondering where my registered design went because I couldn't find it. So I created another and discovered that has created a new folder called Templates for the account that I was trying to make the filter "reply with template". And then I could see the "reply with template" option when creating a filter.

  To understand what was wrong in the first place, I reinstalled the Conversations, and all folders (Inbox, sent, trash, models) have been reinstated. I looked in the template folder and saw two subfolders, one for the account that I just created the new model and one for my default account. In my default account was the original model I've saved. And now when I try to create a filter by using the original template, I see the answer with the template option.

  I can no longer reproduce the problem since the Conversations, creating a second template and then uninstalling reinstalling Conversations.

  So, the problem is solved, but something is not quite write when the first model created during the installation of the add-on of Conversations. I don't remember see a subfolder in the Templates folder when I created the first model... I could be wrong, but all I remember is the model itself in the Template folder, and not in a subfolder. So I guess that the answer with the Template option did not appear because the model I made did not seem to be assigned to an account.

  Thanks for help.