Problems with access to blackberry.ui

Similar Questions

• I had problems with access to most of the Web sites and I noticed that HTTPS is no longer, how do I make permanent HTTPS so I can access any Web site?

  I had problems with access to most of the Web sites and noticed that HTTPS no longer appears whenever I try to access a Web site. I can easily connect to my gmail and facebook account, but the problem is that when I click on a link on FB and gmail, I get the annoying message "refused to connect.

  How to address this issue, rather how to make HTTPS permanent so I can easily access any Web site. The date and time on my laptop are both correct. I am currently using OS x 10.9.5.Please!

  How to address this issue, rather how to make HTTPS permanent so I can easily access any Web site.

  My guess is that you have a damaged or invalid certificate entry OS X KeyChain, but to directly answer this question, I would say that consider you something like HTTPS Everywhere. Note, it is not available for Safari. It is available directly through the Google Chrome browser extensions.

• Problem with access point or wireless adapter

  Hello world

  tried to connect to my WiFi, but the convenience store detects that the problem with access point or wireless adapter.
  The drivers are up-to-date and functioning normally. There were discussions on BIOS but I don't know if I would be able to complete the task without bricking your laptop.

  Is there any online support?

  Hi smert

  Your message is not really useful.
  Why? Because no one knows all the details of the laptop, wireless network card system...
  So please would you be kind enough to provide more details.

  But despite the missing information, I recommend:
  (1) reset your router WLan
  (2) check the connection to the WiFi unsecured. (of course for testing purposes)
  (3) check the different (WPA/WPA2 AES, TKIP) encryption

• Problems with access to the web pages, email, video, etc. even when I have 4-5 bars.

  I installed a Dell Wireless 1505 low-profile carrier 1.2 antenna dim/insp in desktop. Its a PCIe wireless lan card. But since last Tuesday patches have been installed I had problems with access to the web pages, email, video, etc., even when I have 4-5 bars.  Someone at - it an idea of what's going on.

  Hi William e. Swann

  1. what web browser do you use?

  Method 1:

  You can read the following article and check.

  You may experience connectivity problems or performance issues when you connect a portable computer that is running Windows Vista or Windows 7 to a wireless access point

  Method 2:

  You can also read the following article.

  How to troubleshoot network connectivity problems in Internet Explorer

  Hope this information is useful.

• Problems with access to Web sites in the laptop of my mother, both wireless and ethernet connections

  Original title: Internet issues

  My mother's laptop has suddenly stopped to access Web sites. I tried to explore, Firefox and Chrome using both wireless and ethernet... connections we both century link and I tried the two houses... my works laptop on both networks. All three browsers connect to the internet, but not all pages opens. I ran the store and he told me that I should look online for more help... which is not the case, but it cannot determine the problem. Any ideas?

  Hello

  Welcome to the Microsoft community.

  I understand that you have a problem with access to Web sites. We apologize for the inconvenience caused to you and appreciates your efforts to try to resolve the problem.

  I would like to know the details below to help you better

  1. Do you receive an error message/code when you access Web sites?
  2. Do you think that any symbol with exclamation on the icon of this internet access on the taskbar (right)?

  I ask you to try the steps in the Microsoft Help article below and check if it helps.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-7

  Also I ask you to reset TCP/IP and check if it helps.

  How to reset TCP/IP using the NetShell utility
  http://support.Microsoft.com/kb/299357/en-us

  Keep us updated on the issue to help you better.

• Problem with access policies (create several resources)

  I'm having a problem with access policies:
  
  The first policy must create a resource.
  And the following policies should create childs on the resource.
  
  The problem here is that when the policies will add the childs, the resource is not configured yet.
  And then each will create a resource but I want just a single resource of the childs.
  
  
  When the resource is already deployed, policies to update this resource correctly.
  
  How can I fix?
  
  TKS

  Ricardo,

  I had a similar problem. In a post processing Manager, I managed the membership of the user to specific through the removeMemberUser roles and the addMemberUser of the tcGroupOperationsIntf class.
  The last parameter of this method is a Boolean value that, if true, would automatically trigger access by programming strategies in post processing.
  The problem is that there also is an OOTB handler for triggering access rules, so I was basically triggering twice access policies and duplicate resources appear.

  I hope this helps.

  See you soon

• Problem with durythme, TempoControl, Blackberry "BOLD" device.

  Hi all

  I am facing a big problem with the feature "javax.microedition.media.Player". My requirement is at the time to play any song that I have to change the "sampling rate". But I have found no way to change this with something related to the sampling rate. Then I tried a different way with durythme, TempoControl PitchControl, all of which are J2ME stuff to change the playback speed of the song. But unfortunately, I get all the objects as null, so there is no way to work with tem? Is not Blackberry supports durythme, TempoControl, PitchControl API? But in the Blackberry API docs. It is written as it will support over and above JDE 4.0.0. But the VolumeControl supersingly works correctly. Is there something wrong in my access procedure?

  Durythme durythme = player.getControl("javax.microedition.media.control.RateControl") (surquantifiées);  or,

  Durythme durythme = player.getControl("RateControl") (surquantifiées);

  PitchControl pitchControl = player.getControl("javax.microedition.media.control.PitchControl") (PitchControl);   or,

  PitchControl pitchControl = player.getControl("PitchControl") (PitchControl);

  TempoControl tempoControl = player.getControl("javax.microedition.media.control.TempoControl") (TempoControl);  or,

  TempoControl tempoControl = player.getControl("TempoControl") (TempoControl);

  Please suggest me why I get this error AND that is the rigth way to change the "sampling rate" of a player or playback speed (fast or slow reading).

  Thanks to all in advance.

  Someone at - he never face this problem? Can you tell me how to get the concentration of the technical team of RIM? Because I take decession concrete on ' is it possible to change the playback rate or not?

• Adobe Flash Player 12 creates problem with access setting Kaltura

  After installing Flash Player 12, I have the following screen: problem with Kaltura ' cannot access the settings of.
  (Have screen shot, but it can not paste here...)

  ***************
  Looks like:
  Captions Settings
  FONT      SIZE
  Stroke  ON
  Background OFF
  SAVE CANCEL
  
  ******************

  The video plays, but with this window in the middle of the image. Just happened after the update.

  Jean-Jacques,

  You can download an image by clicking on the button Browse located below the reply box...

  It would help a lot for help you.

  From what I understand of the posted link iamjayakumars, Flash 12 beta will install updates in the background, but I think there could be a feature that users can configure to install Flash when they want to and not automatically push it to users.

• Problems with access to the internet - suspected hardware conflict (IP address)?

  Hello

  I wonder if you could help out me?

  I have problems with internet access on a wireless router with what appears to be a conflict between three different pieces of equipment.

  I have a laptop running Windows 7 & an Ipod Touch which access entered it internet without any problem on a Belkin 54 g wireless router.

  Everytime I turn on my Windows Vista desktop PC, both devices 'hang up' (not the o/s of just no internet access) desktop PC seems to have access to internet at the outset and then access toggle on and outside.

  I then shut down the PC and reset before internet access wireless router is available on the portable computer and the IPOD Touch. I find it very frustrating, because I want that all three devices to be able to access the internet at the same time.

  An error message came up initially on the laptop, marking an IP address conflict. I paid for for a guru PC "told" to come take a look at this - he made some changes to the IP address of the desktop computer, then it wouldn't be anywhere near the addresses of the other 2 devices, but this seems not to have solved the problem.

  Can you please specify? Any help would be welcome!

  Thank you very much

  Rob Fleetwood.

  Hello

  Method 1:

  I suggest you follow the link and check.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  I suggest you follow the link and check.

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Method 3:

  I suggest you follow the link and check.

  Get help with the message "There is an IP address conflict"

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-there-is-an-IP-address-conflict-message

• Problem with access: local only for wireless in Vista

  A few weeks ago, we got a new router at home. It works fine, but a few days ago, my computer suddenly could no longer access the internet wireless on this subject. (He had been able to before). Other computers in the House can use it for the wireless, and my computer can get on the internet by cable. My computer can also access wireless to other places, but not at home, and more.

  So far, I tried everything what I found on the internet to solve the problem without success. I tried:

  1. the solution proposed on this page http://support.microsoft.com/kb/928233.

  2. make sure that windows is completely updated.

  3 disable IPv6 and IPv4 (although not at the same time).

  4 turn off the power management feature that allows the computer to turn off the wireless card.

  5. disabling and re-enabling the network card.

  so far, nothing has worked. Can someone, please?

  Hello

  In most cases, this problem is created by the problem with wireless security.

  Try to connect with the security temporarily turned off.

  Or firewall blocking local traffic.

  Wi - Fi in general.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Dependency problem with the new Blackberry Plugin for Eclipse

  I just encountered a problem with the new version of the JDE Eclipse Plugin. I set up my application project so that it uses two other projects such as libraries. Both of these projects are on the way to build Java in the settings of the application project, and the manufacturer Eclipse compiles without errors.

  But when I try to run on the Simulator, the application loader throws an Exception stating that it could not find one of the classes listed in library projects. Since it is the importation of first class in the main class, I guess that it was unable to find the entire library.

  I tried to have the application project to import the project two library, but nothing alx files has changed.

  In the old version of the Plugin, there is a property of the project "Blackberry project dependencies" or something like that, which should be set for library and rapc.exe projects and the simulator would be their. That went away, and I was told during Devcon now suffice to add libraries to the classpath. Apparently, this is not so for me.

  Can you give me an indication of what goes wrong?

  The problem seems to be that I imported my projects since the previous version of Eclipse plug-ins, Blackberry. I have now created a new workspace and new projects, completely maintaining the source files, and it works.

• My wireless on my laptop network card has stopped working. Error: problem with access point or network adapter.

  The message bed "problem with the network adapter or access point.  Is there anyway to solve this because convenience store could not.

  Hello

  1 did you change on your computer before this problem?

  2. What is the brand and model of your computer?

  Follow the suggestions and see if it helps.

  Method 1

  You can follow the procedure in the article.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2

  Check to see if the problem exists in the boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  See also:

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Use Network Troubleshooter event logs to solve network problems

  http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

• I have a problem with access to a Web site on the computer.

  I just had to Comcast replace a defective modem/router this morning & now there's a site I can't access it on my desk. I can access it fine without thread through my Smartphone or tablet. But not through my office. I have no problem with all other sites as far as I KNOW

  I managed to find the cause of my own. There is no error message, no timeouts. Just went to a blank window. I have disabled the Microsoft Virtual WiFi Miniport card & Realtek PCIe FE Family controller & it solved the problem

• Problem with the browser blackBerry Smartphones.

  Hello

  I have a problem with my Bold 9700... Open dosent browser if I click the icon and there is no problem with the other.

  I tried to reinstall the software, updated the OS, but I'm unable to solve the same. Shortly after installation, it will work for one time, while connected to the computer and if I unplug it, it's the same problem.

  Does anyone have a suggestion for the problem.

  Please find the procedure to perform a clean OS reload, share, if it is not working

  http://BTSC.webapps.BlackBerry.com/BTSC/ViewDocument.do?externalId=KB11320&sliceId=2&cmd=displayKC&d...

• Problem with Wifi of blackBerry Smartphones

  There is a problem with the wifi on my 8520 because whenever I'm on wifi I have to turn on the data service and use my credit. My friends who have a blackberry say they do not have to activate the data service

  Please help someone

  Kelly

  When you connect to WiFi, you see the symbol blackberry as the image I linked above?  If so and it still does not work, you will need to take it to the store.  You should not disable your data service either.  With the symbol next to WiFi, it's that the connection of the device is using ge on the web, etc.