Error with the utility of the provision to users

Similar Questions

• Cannot synchronize with the provisioning of users

  Hello
  
  None of the users other than admin are able to connect on the planning application to SIT. I have access admin SIT, but still not able to connect to any planning application. The error I get is "unable to synchronize with the provisioning of users. See the Planning journal for more details".
  
  What could be the reasons? What paper check?
  
  version - 11.1.1.3
  
  Kind regards
  Brig.

  Have you tried to run the utility updateusers:-http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin/ch03s12.html
  This should try and HSS sync with the tables of planning, it will also display all failures.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• EPMA planning application migration: no synchronization with the provisioning of users

  Hi all
  We are migrating Production applications to dev. We have a planning EPMA and Essbase application in both environments.
  We migrated artifacts in the file system in PROD (Shared services, EPMA, planning, Essbase) and Reporting. We have copied and pasted into the folder what in DEV.
  Then, we try to migrate objects in DEV file system applications. First of all we did successfully EPMA artifacts in the migration status report, and then we deployed the application in the planning without any error. (msg showing as synchronized deployment). After that we had shared services, it is not
  MSG for error report status of migration:
  
  + 28:6571:Application < xxxxx > does not exist in the target. 28:6571:application < xxxx > does not exist in the target. 28:6571:application < xxxx > does not exist in the target. 28:6571:application < xxxxx > does not exist in the target. 28:6571:application < xxxx > does not exist in the target. ...+
  
  When I try to open the planning application, I get the error message: unable to synchronize with the commissioning, user see Planning journal for more details
  HyS9planningsyserr.log details:
  [INFO] RegistryLogger - REGISTRY LOG INITIALIZED
  [INFO] RegistryLogger - REGISTRY LOG INITIALIZED
  Rebinding of RMI thread creation
  com.hyperion.planning.DuplicateUserException: another user with hypadmin name already exists.
  com.hyperion.planning.DuplicateUserException: another user with hypadmin name already exists.
  com.hyperion.planning.HspRuntimeException: synchronization with the provisioning of users failed. Check the journal planning for more details
  at com.hyperion.planning.HspJSImpl.synchronizeUserWithProvisioning (unknown Source)
  at com.hyperion.planning.HspJSImpl.login (unknown Source)
  at com.hyperion.planning.HspJSImpl.login (unknown Source)
  at com.hyperion.planning.HyperionPlanningBean.Login (unknown Source)
  at HspLogOn.Handle (unknown Source)
  at HspLogOn.doGet (unknown Source)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3241)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2010)
  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1916)
  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
  java.lang.RuntimeException: errors occurred during synchronization: [com.hyperion.planning.DuplicateUserException: there is already another user with the name of hypadmin.]
  at com.hyperion.planning.HspJSImpl.synchronizeUserWithProvisioning (unknown Source)
  at com.hyperion.planning.HspJSImpl.login (unknown Source)
  at com.hyperion.planning.HspJSImpl.login (unknown Source)
  at com.hyperion.planning.HyperionPlanningBean.Login (unknown Source)
  at HspLogOn.Handle (unknown Source)
  at HspLogOn.doGet (unknown Source)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3241)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2010)
  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1916)
  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
  java.lang.RuntimeException: errors occurred during synchronization: [com.hyperion.planning.DuplicateUserException: there is already another user with the name of hypadmin.]
  at com.hyperion.planning.HspJSImpl.synchronizeUserWithProvisioning (unknown Source)
  at com.hyperion.planning.HspJSImpl.login (unknown Source)
  at com.hyperion.planning.HspJSImpl.login (unknown Source)
  at com.hyperion.planning.HyperionPlanningBean.Login (unknown Source)
  at HspLogOn.Handle (unknown Source)
  at HspLogOn.doGet (unknown Source)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3241)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2010)
  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1916)
  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
  com.hyperion.planning.DuplicateUserException: another user with hypadmin name already exists.
  com.hyperion.planning.HspRuntimeException: synchronization with the provisioning of users failed. Check the journal planning for more details
  at com.hyperion.planning.HspJSImpl.synchronizeUserWithProvisioning (unknown Source)
  at com.hyperion.planning.HspJSImpl.login (unknown Source)
  at com.hyperion.planning.HspJSImpl.login (unknown Source)
  at com.hyperion.planning.HyperionPlanningBean.Login (unknown Source)
  at HspLogOn.Handle (unknown Source)
  at HspLogOn.doGet (unknown Source)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3241)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2010)
  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1916)
  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
  java.lang.RuntimeException: errors occurred during synchronization: [com.hyperion.planning.DuplicateUserException: there is already another user with the name of hypadmin.]
  
  
  
  
  Thank you
  Mady

  Hello

  I have the solution for this problem with the support of the Oracle.

  I have restored the database and migrated artifacts using LCM. a method is enough to make the migration of Planning (from Support of Oracle) applications

  Thank you
  Mady

• How to fix the error with the code: 0xe7210001 failed to load powrprof, object: cls

  Hello

  Dose anyone know how to fix the error with the code: 0xe7210001, message: unable to load powrprof, object: CLSD-no-it is found;
  OR: Fingerprintsoftware OR error: replicas THotkey.exe message window and the computer freezes

  Maleware scanned and virus, also in safe mode, found no infection, reinstalled driver fingerprint, but nothing has changed.

  grateful for the help!

  Hello

  > message: unable to load powrprof, object: CLSD-no-it is found;
  In my view, this would mean that there is a problem with Toshiba Power Saver
  What laptop Toshiba, you have exactly?

  Maybe reinstall Power Saver could help. You can find it on the official website of Toshiba.

• Satellite L350-214 - error with the software Reeltime

  Hello

  I have a Satellite L350-214 with Windows 7 Pro and have encountered an error with the software Reeltime, I uninstalled and reinstalled and still get the error below. Any help or assistance would be great

  Tony Miller

  Log name: Application
  Source: Windows Error Reporting
  Date: 2010-11-30 12:27:58
  Event ID: 1001
  Task category: no
  Level: Information
  Keywords: Classic
  User: n/a
  Computer: Tony-TOSH
  Description:
  Fault bucket 1223018385, type 5
  Event name: CLR20r3
  Answer: No available
  Cabin ID: 0
  Signature of the problem:
  P1: tosreeltime.exe
  P2: 1.0.0.0
  P3: 4a769d0e
  P4: WindowsBase
  P5: 3.0.0.0
  P6: 4b5950b7
  P7: a86
  P8: 18
  P9: System.InvalidOperationException
  P10:
  Attached files:
  C:\Users\Tony\AppData\Local\Temp\WER7C9E.tmp.WERIn ternalMetadata.xml
  These files are available here:
  C:\Users\Tony\AppData\Local\Microsoft\Windows\WER\ ReportArchive\AppCrash_tosreeltime.exe_25c5a6496c7 ad44943ce88637e3389e8a80bd45_07f0c745
  Symbol of the analysis:
  Recheck for solution: 0
  Report ID: d5b71327-fc74-11df-a596-00266c333aed
  State: 0
  The event XML:
  
  
  
  1001
  4
  0
  0 x 80000000000000
  
  37886
  Application
  Tony-TOSH
  
  
  
  1223018385
  5
  CLR20r3
  Not available
  0
  tosreeltime.exe
  1.0.0.0
  4a769d0e
  WindowsBase
  3.0.0.0
  4b5950b7
  A86
  18
  System.InvalidOperationException
  
  
  
  C:\Users\Tony\AppData\Local\Temp\WER7C9E.tmp.WERIn ternalMetadata.xml
  C:\Users\Tony\AppData\Local\Microsoft\Window s\WER\ReportArchive\AppCrash_tosreeltime.exe_25c5a 6496c7ad44943ce88637e3389e8a80bd45_07f0c745
  
  
  0
  d5b71327-fc74-11df-A596-00266c333aed
  0
  
  
  My system specs

  Hey,.

  If you get this error Reeltime, you should try Ccleaner. There may be a registry problem and CCleaner might solve this problem. This great freeware and easy tool which you can download here:
  http://www.Piriform.com/

  Check this box!

• Flight Simulator 2004 install stops at 97% say there is an error with the file world.cab

  While the resettlement of fs2004, the installation stops at 97% saying there is an error with the file world.cab, this damaged disc 4.  Someone at - he found a solution to this?

  Thank you

  Well, if, as you say, the disc is damaged. The solution would be to get another drive.

  Although I would have a look at the following:

  Take a look at the following: http://support.microsoft.com/kb/258496

  I hope that, if necessary, you can get a free replacement disc.

• Get "I/o Error" with the 0x8078002A error code when I start a backup.

  * Original title: IO Error Message - I am an amateur

  When I start a backup of my hard drive to my external hard drive, I get an error that reads "I/o Error" with the 0x8078002A error code.  I am a real novice.  I can do either fix it or work around this problem?

  Hello

  Welcome to the Microsoft community.

  Try the steps in these articles:

  Error message when you try to perform a full backup on a Windows Vista-based computer: "" the request could not be performed because of an i/o device error".
  http://support.Microsoft.com/kb/952272
  Note: It is applicable for Windows 7 as well.

  Perform a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

• How reslove an error with the dbms_redefinition.start_redef_table command?

  Command:

  BEGIN

  () DBMS_REDEFINITION.start_redef_table

  uname = > "kiku"

  orig_table = > 'pletest3_pn_kiku_api_db ',.

  int_table = > 'pletest4_pn_kiku_api_db');

  END;

  Error:

  Error report:

  ORA-12008: error path refresh materialized view

  ORA-14400: inserted partition key is not mapped with any partition

  ORA-06512: at "SYS." DBMS_REDEFINITION", line 50

  ORA-06512: at "SYS." DBMS_REDEFINITION", line 1343

  ORA-06512: at line 2

  12008 00000 - "error in the path of refresh materialized view.

  * Cause: Table SNAP$ _ < mview_name > reads lines of sight

  MVIEW$ _ < mview_name >, which is a view of the main table

  (the master can be on a remote site).  Any

  error in this way will cause this error when updating.

  For updates of the Rapids, the table < master_owner >. MLOG$ _ < master >

  is also referenced.

  * Action: Examine the other messages on the stack to find the problem.

  See if SNAP objects $ _ < mview_name >, MVIEW$ _ < mview_name >.

  < mowner >. < master > @ < dblink >, < mowner >. MLOG$ _ < master > @ < dblink >

  There is always.

  How reslove an error with the dbms_redefinition.start_redef_table command?

  As I said before, this may be reproduced if the intermediate table is not created correctly.

  SQL> --My database version.
  SQL> ----------------------
  SQL> SELECT * FROM v$version;
  
  BANNER
  --------------------------------------------------------------------------------
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  PL/SQL Release 11.2.0.1.0 - Production
  CORE    11.2.0.1.0      Production
  TNS for Linux: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production
  
  SQL> ed
  Wrote file afiedt.buf
  
    1  CREATE TABLE not_partitioned_tbl AS
    2*  SELECT object_id,object_name,created,owner FROM all_objects
  SQL> /
  
  Table created.
  
  SQL> ALTER TABLE not_partitioned_tbl ADD CONSTRAINT not_partitioned_tbl_pk PRIMARY KEY (object_id);
  
  Table altered.
  
  SQL> CREATE INDEX npt_created ON not_partitioned_tbl(created);
  
  Index created.
  
  SQL> EXECUTE DBMS_STATS.gather_table_stats('SCOTT','NOT_PARTITIONED_TBL',cascade=>true);
  
  PL/SQL procedure successfully completed.
  

  Now, I create the staging table without MAXPARTITION, so not all "created" dates cannot be mapped.

  SQL> ed
  Wrote file afiedt.buf
  
    1  CREATE TABLE partitioned_tbl (object_id NUMBER, object_name VARCHAR2(30), created DATE, owner VARCHAR2(30))
    2      PARTITION BY RANGE (created)
    3      (PARTITION pt_2005 VALUES LESS THAN (to_date('01/01/2006','dd/mm/rrrr')),
    4       PARTITION pt_2006 VALUES LESS THAN (to_date('01/01/2007','dd/mm/rrrr')),
    5       PARTITION pt_2007 VALUES LESS THAN (to_date('01/01/2008','dd/mm/rrrr'))
    6      --PARTITION pt_rest VALUES LESS THAN (MAXVALUE) -- Maxpartition  is commented out intentionally.
    7*     )
  SQL> /
  
  Table created.
  
  SQL> EXEC DBMS_REDEFINITION.can_redef_table('SCOTT','NOT_PARTITIONED_TBL');
  
  PL/SQL procedure successfully completed.
  
  SQL> conn sys as sysdba
  Enter password:
  Connected.
  SQL> ed
  Wrote file afiedt.buf
  
    1  BEGIN
    2     DBMS_REDEFINITION.start_redef_table('SCOTT','NOT_PARTITIONED_TBL','PARTITIONED_TBL');
    3* END;
  SQL> /
  BEGIN
  *
  ERROR at line 1:
  ORA-12008: error in materialized view refresh path
  ORA-14400: inserted partition key does not map to any partition
  ORA-06512: at "SYS.DBMS_REDEFINITION", line 52
  ORA-06512: at "SYS.DBMS_REDEFINITION", line 1646
  ORA-06512: at line 2
  
  SQL>
  

• Error offline - we are sorry, but there was a communication error with the server. Please try again and if the problem persists, contact Adobe Techincal Suport...  (INVALID_QUERY: XMLList object)?

  After a number of years of service, my Adobe Premiere CS4 gives me the following error message:

  Error offline - we are sorry, but there was a communication error with the server. Please try again and if the problem persists, contact Adobe Technical Support...  (INVALID_QUERY: XMLList object).

  I use this software on an old Dell desktop computer to two year with many members and drive.  It is a stand-alone application, not connected to a server.

  Anyone have any ideas on how to solve this problem?

  I think it has to do with the central resource is no longer supported.  Everything works OK if you ignore the message?

• I'm in photoshop and I'm trying to adjust the pressure of my pen. However, I get this sign of error with the sign of exclamation on the side and the pressure is not resolved.

  I'm in photoshop and I'm trying to adjust the pressure of my pen. However, I get this sign of error with the sign of exclamation on the side and the pressure is not resolved.

  
  

  I'm running on Windows 8, I'm using the latest version of Photoshop (2015) and I have a Wacom Intuos tablet. What should I do?
  

  Thanks, I forgot actually download wacom itself. It works now. Thank you!

• communication error with the server. callback failed for the data entry page

  Hello
  
  We have recently applied the corrective update EMP on EMP 11.1.2.0 111.2.1.
  We have following the architecture,
  
  database server: sql server 2005
  Server Foundation (OS = windows server 2008): HSS, EPMA, Manager Calc, EAS, EIS, provider's server, planning
  Essbase Server (OS = windows server 2008): essbase
  
  After you apply the patching EMP 11.1.2.1, we apply after Electrodes for IE 9 compactibility i.e EMP 11.1.2.1.600 patches
  
  1. patch 14119724 (Workspace)
  2 14142678 patch (Shared services)
  3 patch 14224664 (EPMA)
  4 patch 14464109 (planning)
  
  After you apply above patches, all users get error when opening planning web form through the workspace of all client computer.
  
  "* error communication with the server. callback failed for the data entry page. "
  
  
  
  
  When restore us only planning patch 14464109 , issue of "communication error with the server. callback failed for the data entry page "get resolved for all users, but failed for a single user IE"user xyz" "
  
  the user xyz have OS = windows 7 and IE 8
  user xyz can take foundation server RDP can open any form of planning successfully in vain get when doing the basic machine.
  
  I have following question:
  1. Why do we get error "error communicating with the server. callback failed for the data entry page"after you apply the fixes to IE9
  
  2. after cancellation all patches or planning one patch, why the user xyz always get the error but not other users
  
  
  Thanks in advance
  
  Published by: 922755 on June 7, 2013 16:08

  It might be useful to have a read of the following doc Oracle Support - "error:"error Communication with the server. " "Callback failed for the data entry page" when you open a Web form of planning with the members of the Type of text [ID 1392689.1].

  And then this question should be resolved en.600

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• vCenter 4.1/ESXi 4.1 material status "Communication error with the server.

  I am slot that a brand new installation of vCenter with two new installs of ESXi 4.1 connected on it. I use on Dell PowerEdge 2950 s ESXi servers. I tired the customized version of Dell and vmware ESXi vanilla version. My host vCenter is Windows 2008 R2.

  In vCenter, the two server ESXi, any version of ESXi, I run, I get "Communication error with the server" error when I click the tab hardware state. No data appears in the hardware status tab.

  Only suggestion of Dell has been updated with firmware/BIOS on the server level. I did and it did not help.

  Anyone has any suggestions or ideas what would cause this?

  I had exactly the same problem what is to have everyone on this thread.  I finally called VMware support.  It is certainly a problem with Tomcat.  Apparently, during my initial installation of tomcat server vCenter (on a Win2k8R2 vanilla Server / unreleased) na not create a database file.  The vCenter Server uninstalled eventuall tech and went through the Setup again.  For some reason any Tomcat created db it's good the second time.  After installation, it takes about 5 minutes for the db should be created.

  On Windows 2k8R2 it is located here: C:\Program Files\VMware\Infrastructure\tomcat\lib\xhiveConfig\data

  The name of the comic is VcCache-by default-0. XhiveDatabase.DB

  My server didn't have one at all.  The relocation has created, at the beginning it is 0KB in size.  After 5 minutes, it grows up to 25, 600KB.

  Everything in my vCenter works now correctly.  I'm on 4.1.320137

  I hope this helps.

  Dave

• Defined column ambiguous error with the Merge statement

  Hi guys,.
  I get the ' Error (136,4): PL/SQL: ORA-00918: column ambiguously defined "error with the following query of fusion,

  MERGE INTO Inv_Stk_Trns_Tail a
     USING (SELECT b.*, c.*
     FROM OLR b ,Inv_Stk_Trns_Tail c 
     WHERE b.Trn_Type <> '0'
       AND b.VoucherType IS NOT NULL
       AND b.VoucherType = 'SF'
       AND b.Item_Code = c.Item_Code
       AND c.PROPERTY = 0) src
     ON (a.Sl_No = src.Sl_No and a.Ref_No = src.Ref_No )
     WHEN MATCHED THEN UPDATE SET Item_Avg_Ppr = src.Opn_Avg_Cost,
                                  Rate_Bc = src.Opn_Avg_Cost;

  I tried to solve the problem in a lot of ways, but no use. Please help me solve this problem. If you want more details, I'll give you.
  Thank you
  RAM

  SELECT B.*, c.

  Try all the (necessary) columns on the code and the name of each column a unique alias.

• How to install correctly the Provisioning of users DB management

  Hello!
  
  As a beginner, I try to configure the provisioning of users for Oracle 10g DB.
  Software installed:
  -Oracle Database 10g (10.2.0.3)
  -Oracle WebLogic Server 10.3
  -V9.1.0.1 oracle Identity Manager
  I put everything in a virtual lab on MS WinServer 2008 environment to test things...
  
  I am going through these steps (IOM connector database management © 9.0.4 User Guide):
  http://download.Oracle.com/docs/CD/E11223_01/ doc.904 /e10425/toc.htm
  
  My PROBLEM:
  1. I completed all the steps from the Documentation until the "Connector feature 4 tests:
  http://download.Oracle.com/docs/CD/E11223_01/ doc.904 /e10425/testing.htm#CEGDGBDA
  
  2. I edited the "config.properties" like this (according to the documentation):
  http://img2.imageshack.us/img2/3743/ConnectU.PNG
  
  3. then I run OIM_HOME\xellerate\XLIntegrations\DatabaseAccess\scripts\DBAccess.bat
  
  * 4. And the test is a failure, see below for the error: *.
  http://img527.imageshack.us/img527/994/error2l.PNG
  http://img79.imageshack.us/img79/3647/errori.PNG
  
  
  Your response is greatly appreciated!
  I thank very you much in advance!

  Hello

  There is a notion of 'reconciliation of search' you need to understand.

  To any target system if there is no field for which there is a set of predefined values (only these values must be fulfilled here), then we write a kind of reconciliation looking to schedule a task. In the backend code will link actually to the system target, reads all the valid values and then fills these values for corresponding in the IOM associated with this field of the process shape.

  In 'Database UserManagement' connector 'Rôles' are the type of fields that have a research associated with it. The latest connector pack for it is 9.0.4.5. If you need to find a scheduled task that must reconcile these values of the roles of the target with the IOM by deposit in the attributes of required task. Once these values are filled to the IOM, you can very well use these values in the screens configuration of workflow for this resource by clicking on the icon of the field search.

  Let me know if you need more information.

  Sunny

• What is the situation with the mac pro users and map of cuda for ray-tracing work?

  What is the situation with the mac pro users and map of cuda for ray-tracing work? If it is not necessary or should I try to install a?

  CUDA acceleration is no longer under development, and I've only played with traced to the RADIUS on a few test projects. If I need 3D dimensions objects I used C4D Lite, which is now included in EI