Errors on windows 2008 to uninstall using mysql

Similar Questions

• error on Windows 2008 server std edition "Windows could not update the Configuration to start the computer. Installation cannot continue. "

  I try to install windows 2008 server std edition on HP DL 380 G5 server, I am getting error while installing "Windows could not update the Configuration to start the computer. Installation cannot continue. ", please suggest?

  I tried also with HP smartstart CD, but failed.

  Thanks guys, I found the answer to my question, I used the last HP smart Start CD (V8.70B for windows 2008 server X 64) for DL380g5 for windows 2008 server STD, and it worked fine.

  For the Smart Start CD list visit: http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=344318&lang=en&cc=nl&taskId=135&prodTypeId=18964&prodSeriesId=345557
  Thank you...

• 10g BI publisher Setup get error in windows 2008 R2 64-bit

  HI friends,

  I try to install the 10.1.3.4.1. and 10.1.3.4.2 in the windows 2008 R2 64-bit server.

  Run the setup.exe from the folder its audit and getting spent in the pre requires.

  And is not to open the graphical utility from Installer instead of as its showing an error like

  "setup.exe has stopped working".

  Windows can check online solution of the problem

  close the program.

  I downloaded the software from the following location in the RTO,

  http://www.Oracle.com/technetwork/middleware/bi-Publisher/downloads/index.html

  http://www.Oracle.com/technetwork/middleware/bi-Publisher/downloads/index.html BI Publisher 10.1.3.4.2 for Windows (32/64 bit) (1 GB)

  http://www.Oracle.com/technetwork/middleware/bi-Publisher/downloads/index.html BI Publisher 10.1.3.4.1 for Windows x 86 (765 MB)

  
  

  Please suggest us to go further...

  Waiting for the answer.

  
  

  Concerning

  Kumar
  

  Hello

  Thanks for the replies.

  The problem has been resolved.

  due to unzip the software in the longest trail, we got this error.

  Solution:

  We tried to unzip the software using 7zip.

  and unpacked the software to drive direct c (shortest path as C:\BPM\)

  Then I tried to run the setup.exe file, it worked very well...

  Once again thank you for their support.

• services licensing Terminal Server in windows 2008 can be used on windows 2008 r2

  I bought windows 2008 standard terminal service license (unit 5) a few years ago. I wonder if I reinstall the server with windows 2008 r2 foundation, I will be able to use/install the same license key?

  I bought windows 2008 standard terminal service license (unit 5) a few years ago. I wonder if I reinstall the server with windows 2008 r2 foundation, I will be able to use/install the same license key?

  'CAL FAQ
  Q: can customers use a Windows Server 2008 CAL to access a license for Windows Server 2008 R2?
  A: Yes. A CAL, Windows Server 2008 can be used to access Windows Server 2008 R2. »

  page 13 of the pdf
  http://download.Microsoft.com/download/0/D/9/0D9DDF52-A855-487B-9B74-5A09A9389551/Windows%20Server%20system%20Center%20and%20Forefront%20Pricing%20and%20Licensing%20Guide.PDF
  If you need additional details post under http://social.technet.microsoft.com/Forums/windowsserver/en-US/home

  It is dedicated to server stuff

• I get the error of Windows Explorer tries to use the Control Panel Applets

  Whenever I have open Control Panel, and then select an applet (Folder Options), I get an error for Windows Explorer and everything is frozen until I have completed the task with the Task Manager.  I am running XP Home Edition with Service Pack 3.  Have passed through each .cpl file by placing each of them, one at a time in a temporary folder and then try the control panel again.  I always have the error and cannot detect what applet file could be causing it.  Any help is appreciated.

  You must run a full on your antivirus scan, until the Trojan horse is completely removed.

  Try to access the folder in this way options:

  Start > my computer > in the top menu, click Tools > choose folder at the bottom of the menu options.

  Also run the eset online scanner on.

  Once the infection has been cleared, you should be able to go into folder options without freezing the pc.

  If you were able to enter the folder through the above method options and let us know if the Trojan horse has been completely deleted.

• Windows 2008 create by using sysprep

  Hello

  I have an expereince on virtual center of windows 2003 living with sysprep, how can I do to windows 2008 where were the sysprep command do?

  Thank you

  Hi Andre,

  so when I deploy a vm from a 2008 model I can customize the virtual machine, including the new SSID without any additional file to be copied into the directory of vcenter?

  This is because win 7, 2008 and 2008 R2 have also installed Sysprep?

  Thank you very much

  ALE

• Opatch error 73 "Windows 2008 R2.

  During the opatch to a new installation of Oracle 11 g version 11.2.0.1.4 that I was trying to opatch with opatch (17906982) said that I need to update to 11.2.0.1.9 before I can run this opatch. I went back to opatc (16803775) and he always says the same thing. My main question is does anyone know what opatch contains the update of 11.2.0.1.4 to 11.2.0.1.9 so that I can update to the most recent opatch.

  This forum works on a Windows Server 2008 R2 computer with all the permissions to all files of oracle connected as the system administrator.

  Please let me know also if I need to provide more information to help on this...

  Thanks in advance for any help you can provide.

  Thank you

  Print

  I ended up by not requiring the opatch 68___ because I already had the displacement. I was able to copy my another server OPatch folder on this server because they would be executed in the same database, then use the Opatch. This solved the problem and allowed me to patch the system. I ended up having only tinkering at the Aug patch (16803775) at the request of customers.

  Thank you Srini once again for all your help.

• CRS-2409: the clock on the host is not synchronous error on windows 2008 RAC

  [ctssd (9534)] CRS-2409: the clock on the host is not synchronous with the average time of cluster. No action was taken that the synchronization of time of Cluster Service is running in observer mode.

  CTSS will determine whether a Network Time Protocol (NTP) daemon is running in the system and if NTP is not running, then CTSS will be run in Active mode and perform the same tasks as the NTP daemon. If the NTP daemon is running, CTSS will be started in observer mode.

  You should check if there is a lag on the nodes.
  You must make sure that ntp is running correctly and with option - x

• cloning of windows 2008 R2 Server without reactivation

  Hi all

  I'm trying to create an image of Windows 2008 R2 sysprepd using the vmware, but after cloning, I asks me to activate windows (I use a volume with a VL of Windows version license key). Initially, I turn it on but after cloning I have to reactivate. This occurs regardless if sysprep was run or not. Can someone point me in the right direction on how to fix this? I try to avoid reactivating Windows, so I don't have to start contacting Microsoft, after reaching the number of activations.

  I have not been able to locate a post with the same subject, however if there is one please let me know where to find it.

  Kind regards

  Petar

  Hi, I'm consedering you want to activate a single win2008 and run the copy of it on your exsi, I would well sujjest you take the cliché of the victory of the assets and close down and copy the [files vmdk and vmxs] folder with a new name and add the same file in vmx to the inventory with another name and power up chnge the ip and the name of the computer ,

  its a naughty meathod

  Thank you

  svisen

• error 2155348249 when trying to backup systemstate on windows 2008 using windowsserverbackup

  Hello

  I have Windows 2008 R2 standard. Whenever I tried to backup systemstate via windowserverbackup, it failed and gave me a 521 event and error 2155348249 and saying: there is not enough space to create vs...
  However, if I did backup other files, it went fine.  I have a lot of free disk space on C.  I could not find a solution on the web.  I increased shadowstorage vssadmin and no help.
  Any ideas?

  You must go to the windows servers forum

• Windows 2008 Server Standard not install KB3099860 with error code 8000FFFF

  Hello

  I look after 3 x Windows 2008 Standard Edition servers. Two of them to date very well and are up to date with updates. One of them however, which is identical in hardware to either of the other two and even fewer programs (we use it as a simple file server), fails on the last update released December 2015:

  KB3099860 a security update for the .NET Framework 3.0 Service Pack 2 in Windows Vista Service Pack 2 and Windows Server 2008 Service Pack 2: 8 December 2015

  I tried a variety of things after having studied the problem these past few days, including:

  1 Uninstalling some updates before this one and see if they re - install. They are all re - install fine until I get to it where it fails with 8000FFFF error code so this leads me to believe that this is not in itself a problem with updates

  2. manually and also linking this Microsoft 'fixit': http://windows.microsoft.com/en-us/windows-vista/windows-update-error-8000ffff

  3. how to install the System Update Readiness Tool for Windows Server 2008 that installs but does not report errors

  4. manually by downloading the fix and trying to install - does not work.

  5. all the details here: https://social.technet.microsoft.com/Forums/windowsserver/en-US/ae6e81e9-5c49-4826-89bc-04a676992706/error-8000ffff-windows-server-2008?forum=winservergen

  including rename them the folder C:\Windows\SoftwareDistribution Windows Update and giving of right on drive C for "Network Services" - still does not work.

  6. as it is associated .NET I tried to repair .NET facilities that exist on the server (2, 3, 3.5 and and re-apply updates, but even once, fails on it.)

  So, what should I do now? The behavior may suggest that it is that only this particular associate .NET that is a failure and that future ones will work, but it's "critical" and which relates to the .NET version which is initrinsic to the Windows 2008 operating system I think I should get it fixed :)

  Any thoughts?

  Thank you

  Dan

  You need to ask this Technet as they manage the server issues:

  https://social.technet.Microsoft.com/forums/WindowsServer

  hope that helps

• Upgrade to Windows 2008 R2 SP1 - error code: DS_S_SUCCESS (0x0)

  I don't know why, but I keep getting this error code no matter what I do.  It seems that the upgrade has completed, but when I connect to the box I have 'Installation failed' with the error code "DS_S_SUCCESS (0x0).  It is not sensible for me as this success would be good right?

  I managed to install SP1 in a different area of Windows 2008 R2 as well.  So I do not understand why it would fail.

  In any case, the error code appears when using the stand-alone installer for x 64 SP1.

  After reset manually Windows Update and then attempt the update through Windows Update, it worked.

  http://support.Microsoft.com/kb/971058

  I guess something is wrong in the standalone installer that could conflict with something else.  I received the error message has no sense.  DS_S_SUCCESS = error code?  Is not supposed.

• I m unable to turn on windows Defender. It displays error 0 * 800106ba. I m using microsoft security databases since then I m having this problem

  I m unable to turn on windows Defender. It displays error 0 * 800106ba. I m using microsoft security databases since then I m having this problem

  Hello

  Are you running MSE or other antivirus/security programs stop Windows Defender running?
  Whether Windows Defender is blocked from running by them. McAfee, AVG and many others to do this.
  MSE includes features of Windows Defender inside run that separately it would be redundant.

  ------------------------------------------------

  Troubleshooting of Windows Defender
  http://support.Microsoft.com/kb/555957

  "%ProgramFiles%\Windows Defender\MsAsCui.exe" is the folder of the default Defender

  Start - type in the search box-> Windows Defender - find top - make a right click on it.
  RUN AS ADMIN

  If no joy using Start - computer or Windows Explorer to access this folder and create a
  Shortcut to put on the desktop and the Start Menu. You can also right click on a shortcut this and
  see if they point to here.

  Goal
  "%ProgramFiles%\Windows Defender\MsAsCui.exe".

  Start in
  "%ProgramFiles%\Windows defender.

  How to enable or disable the Windows Defender
  http://www.Vistax64.com/tutorials/93118-Windows-Defender-off.html

  --------------------------------------

  Maybe something here if necessary:

  What is display / causing the error message? Some anitvirus/security/antispyware products can
  cause this error. On those who use you, including those that your never had even those
  uninstalled (the remnants can cause problems). McAfee is just an example of what many can do.

  Start - type in the search box - Services - find top - Right Click - Run as Admin

  Windows Defender - value STARTED and AUTOMATIC

  or set MANUAL and STOPPED if necessary

  Fix for the problem of 800106ba.
  http://support.Microsoft.com/kb/931849

  Error (an example) of McAfee report.
  http://service.McAfee.com/faqdocument.aspx?ID=TS100610&lang=en_US&prior_tid=2&AnswerID=16777216&Turl==http://KB.McAfee.com/InfoCenter/index?page%3Dcontent%26id%3DTS100610%26actp%3Dsearch

  Check also:

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/574fb871-034C-4B42-B800-328af16a9177

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Get errors when you try to activate Windows 2008 Standard Server

  I upgraded my server from Windows 2000 to Windows 2008. When I try to activate Windows, I have the error first:

  Activation error: Code 0x8007232b
  DNS name does not exist
  So find kbase ID of Article: 929826
  http://support.Microsoft.com/kb/929826
   
  Tried to load my product key again from the command prompt:

  slmgr - ipk

   

  Now I get error:

  0xC004C003 error code
   
  the activation server determined that the specified product key is in use

  This forum is not compatible Windows Server, you need to create a new post on the TechNet forums for assistance: http://social.technet.microsoft.com/Forums/en-US/winservergen/threads

• Always get errors when you try to activate Windows 2008 Standard Server (0xC004C003 error Code)

  I upgraded my server from Windows 2000 to Windows 2008. Initially when I try to activate I get the error:

  Activation error: Code 0x8007232b
  DNS name does not exist
  So find kbase ID of Article: 929826
  http://support.Microsoft.com/kb/929826
   
  Tried to load my product key again from the command prompt:
  slmgr - ipk
   
  Now I get error:
  0xC004C003 error code
   
  the activation server determined that the specified product key is in use

  I went through all the information on product activation, sought help windows, answers, google, still cannot find how to solve this problem.

  Made through the Windows Server 2008 Product Activation helps too.

  I don't want to go beyond the 90 days for activation and started having problems with my Windows Server!

  Please repost your request in the most appropriate Forums of Windowsserver.  Thank you.