ES1 - 111 m-c1le ram max

Similar Questions

• What is the maximum RAM that can be installed in ES1 - 111 M-C9VZ Aspire laptop?

  Some time ago, I bought an Acer Aspire ES1 - 111 M-C9VZ that has 2 GB of RAM installed.

  The manual is completely silent on the extension of the memory, i.e. what maximum RAM would be the system can tolerate. I assume that there is only one memory slot (I hate to take the unit out just to check that).

  Also I suppose you could get one 4 GB memory card to replace the existing one. But the bus system will be able to handle the extra memory.

  Any ideas would be appreciated, thanks

  Derek

  You can upgrade to the top with 8 GB of memory, you have a memory slot in your laptop and need to get one stick to replace the current stick.

  http://www.crucial.com/USA/en

• Pavilion g6-1065ej: what is the ram max must be installed in the pavilion G6-1065ej?

  Hello

  I have a G6-1065ej pavilion.

  IM under win 7 64 bit. Currently have 4 GB of ram in one location.

  What is the capacity of ram max for this laptop? can I add another identical 4 GB ram card to another location?

  I tried to read the manual, it says 8 GB max, but not strategies such configuration.

  TNX, david.

  Yes the manual does sometimes not completely meaningless. What they in fact at p. 3, is it may take up to 8 GB (4 + 4), but it was sold only with up to 6 GB (4 + 2). It can actually take up to 8 GB 2 x 4 gig modules. You need the DDR3-1333 SO-DIMM

  4 GB PC3-10600 1333 MHz shared 621569-001

  https://www.Amazon.com/HP-VH641AT-4-GB-DDR3-PC3-10600/DP/B0030L3B8E/ref=sr_1_2?ie=UTF8&QID=1474110196&SR=8-2&keywords=621569-001

  I'm sure you've seen s. 51 of the manual for 'how-to '.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Pavilion 17-ab002nm: memory ram Max on Pavilion 17-ab002nm

  Hello
  I want to buy this laptop, but I am interested in this how can I put the RAM max inside.

  It comes with 16gig ddr4 2133 ram, but I am interested by this how can I put max at the top of the Tower (I need it to work not for games).
  and how much ssd can support?

  It comes with 128 GB ssd and 1 TB of HDD, but I read somewhere that it can take up to 2 ssd

  I couldn't find any reviews for the top of the tower. -_-

  Thanks in advance

  Hello

  Maintenance and Service Guide:

  Slots PSRMemoryTwo SODIMM, are not accessible or scalable customer:

  Dual channel support ● DDR4-2133

  ● DDR4-2400 dual channel supports (bridge of DDR4-2133)

  Supports up to 16 GB memory max system by the following:

  ● 4096 MB (4096 MB x 1)

  ● 6144 MB (2048 MB x 1 + 4096 MB x 1), no support for 32-bit operating system

  ● 8192 MB (4096 MB x 2) or 8192 MB (8192 MB x 1), no support for 32-bit operating system

  ● 12288 MB (8192 MB + 4096 MB), no support for 32-bit operating system

  ● 16384 MB (8192 MB x 2), no support for 32-bit OS or Windows® 7 Home Basic Edition

  For the HARD drive. Please use page 1 of the first manual on this link because the series features many options.

  http://support.HP.com/us-en/product/HP-Pavilion-17-notebook-PC-series/10862170/model/12344230/manuals

  You must make the decision to buy options as much you can now otherwise might be very expensive when upgraded.

  Kind regards.

• RAM MAX: CQ5320F

  Nº of MODEL CQ5320F PC, rev of # M2N68 - PCB 6.01, Win 7 ultimate 64 bit: ram max?  (specification of motherboard have an error on the hp site) confusing ddr2 and ddr3 same Board of Directors are as follows:

  Hello

  You can go to the site following and he ask a scan your machine for you. It is a very reliable soure:

  http://www.crucial.com/EU/upgrade/HP+-+Compaq-memory/Presario+CQ+desktops/Presario+CQ5320F-upgrades.html

  Your machine uses the DDR3 RAM and 4 GB max.

  Kind regards.

• RAM max HPG6-2249wm

  Thinking of buying a HP G6-2249WM, but I don't want to upgrade RAM.  Does anyone know the RAM max that will support this computer?  Product card state that it has 6GB I DIMM with 2 locations that are accessible to the user.

  Hello

  Max RAM 8 GB (2 x 4) SODIMM DDR3 Non - ECC 1.5 v, unbuffered memory

  Manual

  http://h10032.www1.HP.com/CTG/manual/c03593126

  http://www.kingston.com/en/memory/search/Default.aspx?DeviceType=3&Mfr=HEW&Line=Pavilion%20Notebook&Model=82077&Description=Kingston_System_Specific_Memory_for_HEW_Pavilion_Notebook_HP/Compaq_-_Pavilion_Notebook_g6-2249wm

  Concerning

• Acer Aspire ES1 111 M cannot install windows 10

  I can't update my netbook. During the Windows Update 10 WHEA 8.1 (blue error screen) error message and 8.1 windows is reinstalled. I tried several times with different USB drives external used to expand the capacity of the system.

  Clean Windows 10 installation works, but I cannot activate Windows 10.

  I have regular broadcasts with the WHEA error. It was resolved by the CPU power reduction to 95%.

  The Netbook is Acer service already, but the WHEA issue has not been resolved.

  I think back again.

  It does not resemble your ES1 111 M is on the birthday list.

  http://www.Acer.com/AC/en/us/content/Windows10-update#_ga=1.178858663.264310007.1474604665

  You can read my messages in the link below to get the previous version of "November" of Windows 10 ISO and create with rufus USB installation media.

  http://community.Acer.com/T5/E-and-M-series-laptops/disgusted-51-for-Windows-8-1-recovery-disk-from-...

  The link below explains how to clean your disk and clean install Windows 8.1 (or Windows 10).  The topic is on Windows 8.1, but it's the same instructions for Windows 10.

  http://community.Acer.com/T5/V-and-VN-series-laptops/Acer-Aspire-v3-772-Windows-8-1-clean-install/TD...

• Acer Aspire E 11 ES1 - 111 M-P2YU Win 8.1 the HARD disk transfer to SDS

  I just ordered my E11 ES1 - 111 M-P2YU with 250 GB HARD drive and ordered a 250 GB SDD to speed up and reduce power consumption. How can I move Windows 8.1 since the HDD to the SDS? * Please * don't not sugguest upgrading to W10 - I would rather cut my eyes out of my skull with a rusty spoon and be eaten by the bear while the bees cover sting me for 48 hours straight.

  I hope to be able to create a recover disk/USB then reinstall Win 8.1 and do it properly recognize my installation of Windows without giving my some garbage about piracy...

  Thank you!

  That's all you need to do.

  1 create a USB factory default recovery disc

  http://Acer.custhelp.com/app/answers/detail/A_ID/26287/related/1/session/L2F2LzEvdGltZS8xNDM5ODcwMDA...

  2. remove the existing HARD drive

  3. install the SSD and put back together

  4. Insert the USB

  5 turn on the computer

  6. replace your PC.  The recovery drive will automatically format and partition your new SSD.  When the dialog asks you if you want to repartition the disk, say 'yes '.

  There are probably a few precautions normal security somewhere on youtube.  Of course, you probably want to remove the power cord and the battery before you dive into it with the disassembly.

  And when you use your recovery disk, it would probably be best that food is still plugged in... in case the battery is dead.

  There is no need to enter a key of Windows.  Everything is automatic, including windows key board BIOS recovery.

• ES1 - 111 M-C529 Windows 10 update - card SD and touchpad not installed

  Hello people!

  I upgraded my Acer for windows 10 Home edition 64-bit.

  Installation from USB to the Microsoft page.

  Chose the upgrade path.

  Win 10 installed:

  -video driver

  -wireless driver

  -bluetooth driver

  -network driver

  -sound

  -webcam

  Windows 10 has NOT detected:

  -SD card

  -touchpad

  I have donwloaded ALL drivers from acer for the model and the win10 of the official page of Acer.

  After installing ALL the Acer provided drivers / except bluetooth / wireless - I still don't see:

  -SD card

  -touchpad

  Anyone with any suggestions?

  If you please provide some real useful suggestions and not spam / copy paste things and so forth if possible

  Thank you!

  Bogdan

  Attached screenshot of the actual device manager:

  The standard SDA... with! said is waiting for another start.

  

  I solved the problem:

  I started to look for drivers for the whole family ES1 - x 11 and compare versions.

  For the Intel I/o drivers:

  ES1 - 111M page:

  Drivers of e/s

  Intel

  Driver e/s series

  604.10135.1001.53001

  2.9 MB

  27/07/2015

  File name: IO Drivers_Intel_604.10135.1001.53001_W10x64_A

  Size on disk: 2.91 MB (3 053 605 bytes)

  ES1-311 page:

  Drivers of e/s

  Intel

  Driver e/s series

  604.10135.1001.53001

  3.0 MB

  21/07/2015

  File name: IO Drivers_Intel_604.10135.1001.53001_W10x64_A

  Size on disk: 3.01 MB (3 163 333 bytes)

  Additional SD card reader exist only on ES1-311 page for reasons...

  Card reader

  Realtek

  Driver card reader

  6.3.9600.21275

  9.0 MB

  21/07/2015

  Currently, there are 2 files with the same name and the version with different sizes and different publication date.

  1, I installed the card reader - don't know if it was necessary or not, and then I discovered that the drivers of e/s are different version and I have installed the version of the ES1-311.

  The ES1-311 (more large size / published on 2015.07.21) worked perfectly on ES1 - 111 M and now I paved tactile and SD card.

  So for the future, dear users, please start and search all the site drivers Acer because probably, they are not paid for it or don't know not what grounds they may have to perform less steep than a 10 yo kid.

  Have a good day all!

  B.

• Aspire eRecovery ES1-111 Medium

  Hi, I have an Aspire ES1-111 who had a breakdown of its Members, the recovery partition is slaughtered and the bios has trouble booting from the recovery key. The acer store does no stick eRecovery for ES1-111 and repair-page said that the SNID is not eligible for the service.

  I'm basically left with a brick because there is no legal way to get another copy of 'Make 8.1 with Bing', because it is OEM stuff and I'm obviously not a reseller. Short buying win 8.1 for half price the unit, what can I do?

  Have you checked in with the SNID and the serial number on the appropriate regional site.

  If your computer is under warranty, you can contact Acer German technical support here support German Acer

  You can contact them directly and check the warranty information and send it for repair.

• Acer aspire ES1-111 questions

  Hi all

  I decided to enroll in this community to get some tips and reviews the problems I am experiencing with this laptop. I own an Acer Aspire ES1-111 I bought a week ago.

  Since its first configuration, I noticed problems using it with windows 8.1 (its native operating system). For example, touchpad or keyboard not working not properly and, especially, shutdown problems. In this case specific I could never stop the device correctly, because he remained with the power indicator which continued into 'works' although it seems that the system is freezed was arrested. However, in order to really stop I had to press the power button / stop.

  First of all, I decided to reset the system with built-in software eRecovery but problems remain.

  Secondly, I decided to do a clean install of the operating system and I tried the two Windows 8 and Windows 8.1. In both cases, installation process complete without problems, but when you try to install all the drivers, I experienced freezes and once again the shutdown problems. I followed an order to install drivers (Chipset first, only VGA, etc), but in most cases, I had problems of supra. I also tried to disable "Fast start (recommended) turn" without success. 

  But now comes the strange part.

  I finally decided to give it a try for Windows 7 and, to my surprise, everything works fine! I was able to install the drivers correctly and to stop or restart my laptop without a problem. Now I use Windows 7, but, as it is under warranty, I would ask you what you think of this questions.

  I find it quite strange that a laptop does not properly with its native operating system but it is very good with an older operating system! Do you think I should send to Acer support or ask to change it (although, I don't know if I'm still able to pursue this second option).

  Thanks for your attention!

  MIC

  I think I found the reason why I was unable to run Windows 8.1 smoothly after a new installation. I tried to install it during the configuration of the Bios in LEGACY mode, which is good for the BONES before Windows 8 (like Windows 7, as it was working perfectly) but not for Windows 8/8.1 as it probably some issue when install drivers etc.

  So I decided to reset the Bios original UEFI mode. It was the right decision. Not only touchpad was recognized well when loading the USB bootable (expecially since the Touchpad has been on "Advanced", which in legacy mode, would not work), but also because, when the operating system installation process has been completed, I was able to install all the drivers hardware properly and stop/restart of operations fully worked without problems / freezes and so on.

  Hope this information is useful for other users.

• What is the ram max usable in each grade in my 1119tx want m6 notebook

  What is the ram max usable in each grade in my 1119tx want m6 notebook

  Hello

  It supports up to 16 GB, as noted on page #4 the third manual in the link follong

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&LC=en&product=5344330

  Kind regards.

• Capacity of RAM Max unofficial for x120e

  Can someone confirm that using more the official 4 GB RAM max in x120e works?

  I am running WIndows 7.

  I saw a post elsewhere online 8 GB ("2 x Kingston KVR1066D3S7/4 = 8 GB DDR3 1066 MHz CL7 SODIMM") works, but there is no documentation.

  Welcome to the Forum!

  This has been confirmed several times: x120e certainly supports 8 GB of RAM. As a matter of fact, a person reported same installation of 16 GB of RAM! http://forums.Lenovo.com/T5/X-series-ThinkPad-Laptops/X120e-4GB-or-8gb-Max/TD-p/413327

  I'm not sure about 16 GB, but if you read the whole carefully thread you will find several confirmations of the members and moderators on this Forum than 8 GB really works without problem in x120e. When people have problems, it's because of some brands of RAM of low-end manufacturers or a problem with their system map. In this same thread, you will find many specific manufacturers of 4 GB of DDR3 RAM of the recommendations that have been confirmed to work gently to bring the x120e up to 8 GB. Use one of the recommended brands and specific model numbers mentioned and you will be OK.

  Make sure you have Windows 7 64-bit installed to access all of the 8 GB, Windows 7 32 bit can recognize more than 3 GB of RAM.

• Upgrading RAM for Aspire ES1 - 111 M-P156 possible?

  Is it possible to upgrade the RAM on this laptop Aspire?

  If so, should what kind I?

  Thank you.

  ianwuk

  Hello

  Watch this video of a similar product.

• HP Pavilion 15-au074sa: HP Pavilion 15-au074sa RAM Max upgrade

  Hi guys,.

  I am looking to buy a HP Pavilion au074sa 15, its currently on sale in PC world UK, he says, it comes with 8 GB of RAM

  PC WORLD LINK - http://www.pcworld.co.uk/gbuk/computing/laptops/laptops/hp-pavilion-15-au074sa-15-6-laptop-silver-10...

  I want to max out the RAM, but online help is that it goes up to 8 GB, on the HP website for the laptop above, it says its equipped with 1x8gb of ram and no mention of the total capitacy of avaibale places,

  HP WEB site - http://support.hp.com/us-en/product/HP-Pavilion-15-Notebook-PC-

  Doesn't anyone have / updated this model or whether it can have eztra RAM added and if so how.

  Tanks

  series/10862158/model/12079287/document/c05182233 /.

  Certainly, it has 2 memory slots and can take up to 16 GB DDR4:

  Two locations SODIMM - customer not available/no upgradable DDR4 - 2133 Dual Channel Support (bridge of DDR4-2400 to DDR4-2133) supports up to 16 GB memory max system

  Above is a quote from the repair.

  Manual

  Start the p. 29 and note the warnings on opening the laptop computer is allowed only for service technicians and, unfortunately, I must tell you will proceed at the risk of the guarantee. Yet, many people choose to do and it's a services of this Forum, run by people not HP, can you bring, including HP itself can not, but don't say you were not warned. It is actually fairly difficult. Removal of the motherboard is not necessary, but demand close attention to tighten management and you will be OK. There is also the issue of finding the compatible memory. DDR4 is fairly new on the market.

  See p. 35 and this is the memory module you need to reference HP:

  8 GB 2133 MHz 1.2V shared DDR4 820570-005

  It works:

  https://www.Amazon.com/Ballistix-single-PC4-19200-SODIMM-260-pin/DP/B01DGOF7EA/ref=sr_1_6?ie=UTF8 & qid = 1469112251 & SR = 8-6 & Keywords = DDR4-2400 + SO-DIMM

  I have a Zbook 15 G3 using DDR4 and I used the Patriot DDR4 in mine (from Frys) and it worked fine. Stable performance and in dual channel mode.

  http://www.frys.com/product/8752041?site=SREARCH:MAIN_RSLT_PG

  If it's 'the Answer' please click on 'Accept as Solution' to help others find