Essbase 2nd Instance using backup

Similar Questions

• How to use backups RMAN to restore a RAC database to single instance on another host?

  How to use backups Rman to restore a RAC database to single instance on another host?

  I tried to copy these inline for you:

  ------------

  Backups RMAN disk HowTo restore database RAC to single Instance on another node (Doc ID 415579.1)

  Down

• RMAN DUPLICATE: Use backup or CURRENT database

  Hi all

  I have a database of 32 TB, and about what I've experienced so far, using backup to duplicate the database is similar to the use of the command to RESTORE and RECOVERY manually.

  If I use the option of DATABASE ACTIVE, then I should be concerned about the missing log files?

  Hereby, I mean, text source and target are in ARCHIVELOG MODE anyway.

  Thank you

  To answer your original question, yes you are worried for your missing log file.

  RMAN automatically copies the file to the server in the destination host settings, start the auxiliary instance with server settings file, copy all database files needed and archived redo logs over the network to the destination host and recovers the database.

  If your copy of 32 TB on the network would take more than 1 day (what is your strategy of retention according to your other thread), so what, you won't be able to recover the database.

  And you must mark this thread as a response and continue in your original thread.

• Any attempt to create 2nd instance and links for Ingres Oracle conversion

  I have an oracle instance called ORCL which has been implemented with a DB link to the Ingres database and it market. I want to create
  a second instance using the same binaries so that am not a developer. Using DBCA I created CONVERT.
  
  Here was my memory is faulty as to how the first case has been implemented. I have create a db link and also the entries in the
  ORACLE_HOME\hs directory for the init.ora I have a listener clocked at it lists two instances in the sid_list...
  then, when I try to query the ingres database I get
  
  ORA-28500: connection between ORACLE and a non-Oracle system returned this message: name [Microsoft] [ODBC Driver Manager] Data Source is not found and no driver specified default.
  ORA-02063: preceding 2 of SDFA_INGRES lines
  
  
  My oracle database is on Windows. This is Oracle 11
  
  ORACLE_HOME is ORCL and CONVERT F:\apps\oracle\product\11.1.0\db_1\
  
  Db_2 is set up for the 2nd instance to only the redo logs and control files...
  
  db_1\hs has two files init... one for ORCL and CONVERT
  
  initsdfa_odbc.ora
  
  # HS init parameters
  
  HS_FSD_CONNECT_INFO = sdfa_odbc
  HS_FDS_TRACE_LEVEL = off
  
  
  TNSNAMES. ORA
  
  SDFA_ODBC = < < < this is my 2nd entry... the other is still different name... > > > > > >
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = tcp) (HOST = localhost) (PORT = 1521))
  (CONNECT_DATA =
  (SID = sdfa_odbc)
  )
  (HS = OK)
  )
  
  
  
  LISTENING PORT. ORA
  
  
  Under the SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = sdfa_odbc)
  (ORACLE_HOME=F:\apps\oracle\product\11.1.0\db_1) < < < binary for both... I have a db_2 for file locations
  (program = dg4odbc)
  )
  
  
  
  My link is public
  
  Create the database link public "SDFA_INGRES" connect "DBA" identified by "*".
  using 'SDFA_ODBC ';
  
  
  My pick is the instance to CONVERT as SYS...
  
  Select count (*) in test_table@SDFA_INGRES;
  
  and then I get the above error.
  
  What I'm missing or wrong? Can I have 2 HS services defined in a listener or a need to separate the listeners?
  
  Appreciate any assistance. Excuse my typos... I am on another system and can't cut and paste. So I might have
  a few typos... thank you.

  I don't know that it's a specific thing to Ingres. Maybe this helps:

  http://community.Ingres.com/wiki/How_to_Create_an_Ingres_ODBC_Data_Source_Definition

  -Andy

• Recovery of the system using Backup automatic backup of XP program wants a disk is there a way to let him use a CD instead?

  Recovery of the system using Backup automatic backup of XP program wants a disk is there a way to let him use a CD instead?

  Name of the operating system Microsoft Windows XP Professional
  Version 5.1.2600 Service Pack 3 Build 2600
  Manufacturer of operating system Microsoft Corporation
  250GB_DRIVE system name
  System manufacturer HP Pavilion 061
  EG705AA-ABA M7265C system model
  System Type X 86-based PC
  Processor x 86 Family 15 Model 4 Stepping 4 GenuineIntel ~ 2800 Mhz
  Version/Date BIOS Phoenix Technologies, LTD 3.17, 20/04/2006
  SMBIOS Version 2.4
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
  250GB_DRIVE\HP_Administrator user name
  Time zone Pacific Daylight Time
  Total physical memory 072,00 MB 3
  1.55 GB available physical memory
  Total virtual memory 2.00 GB
  Available virtual memory 1.96 GB
  Page file space 4.83 GB
  Paging file C:\pagefile.sys

  Hello

  The ASR (automated system recovery) tool must have a disk for restoration purposes. The best option, if you really want to use ASR, is a floppy of USB external as suggested by chrisamiller.

  You can also follow this procedure to create the ASR files without the floppy drive and then copy them to another location to create a floppy disk or, if you're lucky, your PC can boot from a USB key (I never tried to start ASR on a key, do not know if it will work or not, but it might be worth it) :

  "You can"trick"the ASR in the race without a floppy drive." When it gets to the point where he writes on the diskette to cancel it. He writes two files, which are used for recovery, in the Windows\Repair directory. After completing your ASR copy these two files (files asr.sif and asrpnp.sif) to a network location and then make the diskette also. Make sure you update your disk whenever you make a new ASR or your backup will be watered.

  Or, you can use a USB floppy drive. It is sometimes the only option, especially if you need to install SCSI or SATA drivers during the recovery. »

  a: when you start the backup, it may be in Wizard mode. Follow the link to the Advanced Mode.
  b. Backup tab.
  c. click on the box next to the drive you want to back up so that it has a blue box.
  d. backup media or file name: Browse.
  e. Select a new file name on your CD.
  f. start the backup.

• where can I find my document saved that I worked from an e-mail, and then saved using backup on the Word icon?

  where can I find my document saved that I worked from an e-mail, and then saved using backup on the Word icon?

  Here are two things to try:
   
  The file is saved in the Temporary Internet Files folder. To locate the path, open the attachment to new then, and now Alt, press F, and to open the Save as window. In the save window slot, right-click on another file in the list, and then click Properties. On the general tab, copy the full path to the location. Then, open a Windows Explorer window and paste the path copied into the address field. This is where the edited file was saved.
   
  Since Christmas

  Copy this line:

  Search-MS:DisplayName=temp%20Files&crumb=ext%3AZZZ*&crumb=location:shell:cache%5CContent.IE5

  Now press Windows-E, Ctrl-Alt-D-V

  ZZZ change to the extension of the file you edited, and then press enter.

  This should show all the recently saved files in temporary Internet files with this extension. Good luck!

  PS Si the file is, please copy in your documents folder before anything else. Open the copy to work.

• Clone in the 2nd instance

  Hi all

  12.1.3

  I am cloning 2nd instance as the UAT, but still I can't perfect it

  I still have another different error even, I followed the procedure, this time, the appstier:

  [APPLY PHASE]

  AutoConfig could not successfully run the following scripts:

  Directory: /u02/appuat/UAT/apps/tech_st/10.1.3/perl/bin/perl-je /u02/appuat/UAT/apps/tech_st/10.1.3/perl/lib/5.8.3-je /u02/appuat/UAT/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3-je /u02/appuat/UAT/apps/apps_st/appl/au/12.0.0/perl-je /u02/appuat/UAT/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/i686-linux-thread-multi/u02/appuat/UAT/inst/apps/UAT_erp2/admin/install

  INSTE8_APPLY 255 txkExecSetJaznCredentials.pl

  Fate of automatic configuration with State 1

  RC-50014: Fatal: failed to run the auto configuration service

  Asked by oracle.apps.ad.clone.ApplyApplTop

  ERROR: AutoConfig completed with errors. Check the logfile at /u02/appuat/UAT/inst/apps/UAT_erp2/admin/log/ApplyAppsTier_12111734.log for more details.

  ApplyApplTop completed successfully.

  # Check the race situation AutoConfig of ApplyApplTop

  WARNING: The autoconfiguration service has completed with errors.

  Please visit the auto configuration section in the log file. If necessary, you can rerun AutoConfig command line after you fix the problem

  As we always say, please look in the log file for the defective script (which is txkExecSetJaznCredentials.pl this time) and you will find more details about the error.

  (Doc ID 1354796.1)

  (Doc ID 2085943.1)

  Thank you

  Hussein

• doubts in the database using backup controlfile recovery.

  Hi gurus,

  I have a doubt in database recovery using backup controlfile.

  I do not speak of "ORA-01207: file is newer than the control file - old control file.

  Here, any of our files archive / redo log have been lost and the problem of lack of update in the control file.

  So why open the database in resetlogs option, after recovering the database by using a backup controlfile. ?

  Thanks in advance

  Mahi

  In order to maintain the consistency of the data, the RCS should be the same in all the files of the controlfile & file REDO data current.

  By definition when you use 'backup controlfile' there a SNA expired in it.

  RESETLOG requires the RCS to 1 in order to get consistency across all files in the database.

  CREATE CONTROLFILE fills this new file with the most recent SNA that exist in the data files.

  It's just the way Oracle has been implemented.

• Database ALTER DATABASE RECOVER using backup controlfile with AUTO option

  Hello. I was recovering a database today and had a little blip.

  I have published the following:

  Database ALTER DATABASE RECOVER using backup controlfile

  I then chose the AUTO option, allowing Oracle to select all available log files so that it would recover to the last log found in the destination of archive

  However... has performed the following:

  ORA-00289: suggestion:
  /U03/Oracle/stk2proddata/archived_logs/arch1_242449_737547185.dbf
  ORA-00280: change 30031145558 thread 1 is in sequence #242449
  ORA-00278: log file
  ' / u03/oracle/stk2proddata/archived_logs/arch1_242448_737547185.dbf' is no longer
  necessary for this recovery

  
  ORA-00308: cannot open archived log
  ' / u03/oracle/stk2proddata/archived_logs/arch1_242449_737547185.dbf'
  ORA-27037: unable to get file status
  Linux-x86_64 error: 2: no such file or directory
  Additional information: 3

  Two messages above that I expected. However, I made then this:

  SQL > alter database open resetlogs;

  ALTER database open resetlogs

  *

  ERROR on line 1:

  ORA-01113: file 1 needs media recovery

  ORA-01110: data file 1: ' / u02/oracle/stk2proddata/system01.dbf'

  This is not what I expected. What I've done wrong? Should I once received the message "cannot open archived log", launched to CANCEL?

  I then recovered again, but used

  SQL > restore database using backup controlfile until cancel;

  ORA-00279: change 30031145558 generated at 30/04/2014 09:58:34 needed to
  thread 1
  ORA-00289: suggestion:
  /U03/Oracle/stk2proddata/archived_logs/arch1_242449_737547185.dbf
  ORA-00280: change 30031145558 thread 1 is in sequence #242449

  
  Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}

  ORA-00279: change 30031157768 generated at 30/04/2014 10:06:07 needed to
  thread 1
  ORA-00289: suggestion:
  /U03/Oracle/stk2proddata/archived_logs/arch1_242450_737547185.dbf
  ORA-00280: change 30031157768 thread 1 is in sequence #242450
  ORA-00278: log file
  ' / u03/oracle/stk2proddata/archived_logs/arch1_242449_737547185.dbf' is no longer
  necessary for this recovery

  
  Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}
  Cancel
  Cancelled media recovery.
  SQL > alter database open resetlogs;

  Database altered.

  No problem then here. Could someone please explain what I did wrong the first time and the second time right? Is this a problem with the car and using CANCEL?

  Thank you!

  DA

  11.2.0.2

  RHEL 5.5

  Bug: 4178579

• Recovery using backup Controlfile...

  Hi all
  
  I have a little doubt about the recovery process...
  
  Suppose I took a cold backup (after immediate stop).
  After that, I started the database, made a newspaper change and delete the control file.
  
  In this case when I try to recover the database by using a backup controlfile (recover database using backup controlfile), I need to provide the name of the log file manually
  to ensure no loss of data during the recovery process.
  After that, I need start the database with the RESET LOGS.
  
  
  But my question is why the database will force you to RESETLOGS even if you haven't lost all the data or you haven't made an incomplete recovery.
  
  
  Thank you...

  >
  Suppose I took a cold backup (after immediate stop).
  After that, I started the database, made a newspaper change and delete the control file.

  In this case when I try to recover the database by using a backup controlfile (recover database using backup controlfile), I need to provide the name of the log file manually
  to ensure no loss of data during the recovery process.
  After that, I need start the database with the RESET LOGS.

  But my question is why the database will force you to RESETLOGS even if you haven't lost all the data or you haven't made an incomplete recovery.
  >
  It's the RESETLOGS forcing resynchronization of the control file.

  A control file "backup" is a copy and is supposed to be an older file so it needs to be synchronized with the redo log using RESETLOGS files.

  See the doc of SQL language
  http://docs.Oracle.com/CD/B28359_01/server.111/b28286/statements_1004.htm
  >
  RESETLOGS. NORESETLOGS clause determines if Oracle database resets the current sequence number to 1, archives logs not archived (including the active log) and eliminates any information redo that was not implemented during recovery, ensuring that it will never be applied. Oracle database using NORESETLOGS automatically except in the following specific situations, which require a framework for this clause:

  You must specify RESETLOGS:

  After completing the incomplete media recovery or media recovery using a backup control file

• How to restore a virtual computer to another computer using Backup Exec virtual

  Hi all

  I tested VMware 3.5.  We have little budget, so we intend to convert 5-10 dev servers into virtual machine running on an existing ML570 HP.  I created a test VM; I could back up and restore the entire virtual machine using Backup Exec to a physical server without problem.  However I can not restore a virtual machine to a different VM.  Let's say I dv01; I backed up using Backup Exec dv01 on the physical server.  Pretending the host has no I have rebuilt a new host, created a new virtual machine with the same name dv01 and same features.  I restored dv01 from the backup.  The restoration is properly; However, he got a blue screen when I rebooted the virtual computer.  The blue screen went so big that I don't remember what it was, but it's the kind of a dll error.

  We want to keep the budget as small as possible using our existing Backup Exec agents, but it doesn't seem to work here.  Is Backup Exec for VMware agent a MUST?  Catering to the same VM is good, but restore to a different VM is not so simple.

  THX.

  As you can see in http://www.vmware.com/products/vi/buy.html, VCB is included in all editions of VI 3.5.

  André

• Error while you're using backup consolidated backup

  Hello

  We are facing a problem with the servers while using backup consolidated backup.

  When the backup runs through scritp, it just create a snapshot of the server of th. and the name of the hard disk goes from the original for example abc1.vmdk to abc1 - 000033.vmdk

  There are several snapshot files. Like this.. which is not allowing us to make the backup

  I tired to change name to onec .vmx files HARD drive system startup and original. but its still looking for the other snapshot, VMDK fies

  PL. help.

  Thank you

  Smail

  If you go into the directory of the virtual machine and "mv vmname.vmsd vmname.vmsd.old", then delete all the snapshot files since you can not use the more anyway, then you should be able to successfully take a snapshot of the virtual machine and then delete it (aka "remove all" in the Snapshot Manager).

  In the future, just move the file to another name vmsd, then create a snapshot and delete all snapshots. and it should solve your problem.  Starting the virtual machine on the "basic" disk will result in losing you any data that was in the virtual machine, since the first snapshot was taken.

• Recover using backup controlfile

  A binary restoration of the controlfile requires incomplete recovery of the database and a database open with resetlogs.
  
  But I understand why it is necessary to specify 'using backup controlfile' with the recover command - what is the difference. With the help of Oracle 11.2.
  
  Since Oracle 10 g, it is more necessary to back up the database after a database opened with resetlogs and the recovery process is able to recover a database to a previous, provided incarnation archivelogs are available. What is the history please?

  I just came across this old post of mine. Actually, I don't really remember what it was. However, I think the confusing part was simply that I didn't, that SQL * MORE and RMAN recovery is not the same.

  When you use SQLPLUS to recover the database "with the HELP of BACKUP CONTROLFILE' is necessary. Under RMAN is not necessary because it automatically determines a BACKUP CONTROLFILE. If the question was probably SQL vs RMAN database recovery.

• ORA-01194 and ORA-00604 when using backup controlfile set #2

  Oracle 11.2.0.1 database version
  Enterprise Linux 5.4
  Database is in archivelog mode.
  
  I'm trying to recover a database according to a backup controlfile to trace #2. Create the controlfile works very well, but recover the database fails.
  
  From what I understand, the recovery fails because it cannot roll forward - 39 sequence is in the online missing redo log file. However, the database opens with the restlogs option and I understand that it should use the archivelogs in order to roll back. Since it is a new controlfile he does not know the archivelogs, but he does not accept to register or use archivelog files.
  
  The recovery as shown in set #2 doesn't seem to work as expected. Any ideas?
  
  Following errors:
  

  SQL>  CREATE CONTROLFILE REUSE DATABASE "RCAT" RESETLOGS  ARCHIVELOG etc.
  Control file created.
  
  Tyring to register on of the archivelogs does not work:
  SQL>  ALTER DATABASE REGISTER LOGFILE '/u02/fra/RCAT/archivelog/2010_09_19/o1_mf_1_33_69bfo5tx_.arc';
   ALTER DATABASE REGISTER LOGFILE '/u02/fra/RCAT/archivelog/2010_09_19/o1_mf_1_33_69bfo5tx_.arc'
  *
  ERROR at line 1:
  ORA-00604: error occurred at recursive SQL level
  
  
  Applying an existing archivelog during recovery does not work:
  
  SQL> recover database using backup controlfile until cancel
  Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
  /u02/fra/RCAT/archivelog/2010_09_19/o1_mf_1_33_69bfo5tx_.arc
  ORA-00310: archived log contains sequence 33; sequence 39 required
  ORA-00334: archived log:
  '/u02/fra/RCAT/archivelog/2010_09_19/o1_mf_1_33_69bfo5tx_.arc'
  
  
  ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
  ORA-01194: file 1 needs more recovery to be consistent
  ORA-01110: data file 1: '/u02/RCAT/datafile/o1_mf_system_6959kz7l_.dbf'
  
  
  ls -l /u02/fra/RCAT/archivelog/2010_09_19:
  -rw-r----- 1 oracle dba 49313280 Sep 19 00:01 o1_mf_1_33_69bfo5tx_.arc
  -rw-r----- 1 oracle dba   312320 Sep 19 00:03 o1_mf_1_34_69bft63b_.arc
  -rw-r----- 1 oracle dba 20343808 Sep 19 02:10 o1_mf_1_35_69bo6y6j_.arc
  -rw-r----- 1 oracle dba    40960 Sep 19 02:12 o1_mf_1_36_69boc9t8_.arc
  -rw-r----- 1 oracle dba    20992 Sep 19 02:13 o1_mf_1_37_69bofng4_.arc
  -rw-r----- 1 oracle dba   794624 Sep 19 02:15 o1_mf_1_38_69bokwbf_.arc

  Thank you
  Markus

  Markus Waldorf wrote:
  I think that I am aware and do not suggest to use the hidden setting.

  What worries me is that the value #2 of the controlfile to trace the contours of the database backup can be recovered even with the lack of recovery online newspapers, but apparently this is not the case. What I also don't understand, is why he simply not restore using the information of the archivelogs. The database was not shut down properly, but isn't always the case when you lose again-online newspapers?

  Here is the text of the controlfile.sql

  -Set #2. RESETLOGS case
  --
  -The following commands will create a new control file and use
  -to open the database.
  -The data used by the Recovery Manager will be lost.
  -The content of online newspapers will be lost and all backups
  -be invalidated. Use this option only if online newspapers are damaged.

  Published by: Markus Waldorf Sep 20, 2010 09:34

  You are right. But it is especially the case.perform, create the new database and will stop immediately (without demolition) and remove newspapers online OS level. And try to recover the database using backup controlfile until cancel or just recover database until cancel then enter Word Cancel and resetlogs option database open. It will work. Because it actually do not need any recovery operation. But your case you need to recover the database. You consider backup restore las and perform incomplete recovery. I think you can do the first test.

• Essbase/smartview customers use jsk/java/jre?

  Hello Experts,
  
  Please clarify me on the following:
  
  Essbase/smartview customers use jsk/java/jre, if so what versions.
  
  Can I use Java in the client side?
  
  Who would influence customers essbase or smartview if Java is upgraded to one of the following versions.
  
  1.4.2_19 / 1.5.0_20 / 1.6.0_15
  
  
  Environment: Essbase 9.3.1
  
  
  Thanks in advance
  
  Kind regards
  Jingle

  Hello

  View excel addin/Smart clients use a JRE if it matter what JRE you have installed on the client.

  The web client for EAS and Studio Analysis Web use a JRE.

  You can certainly use the Java API if you want to write an application and connect to essbase however.

  See you soon

  John
  http://John-Goodwin.blogspot.com/