R100 usb LEGACY NOT WORKING ON REPLICATOR of PORT

Similar Questions

• SA30 USB do not work after reinstallation, please help!

  Hi, my SA30 USB does not work after reintalling, I don't have the original CD with the phone because it was a gift from my friend... I couldn't find the driver from the website, please could someone help me?

  I could use the USB mouse, but when I plug the external hard drive, he has no answers, I tried to get some new material, it could not detect it. Any information would be welcome, see you soon.

  When install you an OS other than the OEM OS recovery, you need to install the drivers and tools in a right order!

  This command is on the Tools & Utilities CD in a html file! When you follow these order all material must be detected!

  Also you can go to http://eu.computers.toshiba-europe.com and download the drivers

  Hans Bye

• Peripheral USB do not work correctly on the Satellite M40 313

  I have a Satellite M40 313 I bought there are about 1 1/2 years and have had some problems with.

  However, I recently bought a Canon S3 IS and a Buffalo portable HD here in Japan, where I currently work.
  These two devices do not work with my computer.

  Attach the HD produced the message that this device will work better with a USB 2.0 high speed Port, before XP decides that the HD is actually a keyboard HID device! The camera mount, for which I had installed the software provided, will produce a message that suggests that I have install usbscan.sys file and forces me to use a driver of generic digital camera that does not work with the Canon camera.
  I fetch the requested file, but it made no difference...

  It seems that it is a problem of USB, and I also noticed that some of my friends devices USB do not work well with my computer.

  In this case, what is the best way to update my software so its compatible USB? Have I been dismantled down to the USB 1.1 version by WIndows at any given time? The pilot on the hub root 5.1.2600.2180 and is dated 07/01/2001.

  Any suggestion is appreciated.

  Hello

  Perhaps a biosupdate could help you? I mean it s do not know if is it a hardware problem or software, so that you can first try to check if it s a software linked history by:
  1.), updated the Bios
  2.) recover the system with the recovery cd (backup your data first!  ;))
  3.) install the latest drivers (do not install MS updates or patches, sometimes they cause errors)

  If you have no success after completing these steps, and then give a few comments.

  Welcome them

• my super USB does not work after last update OS EL Capitan

  my super USB does not work after last update os el capitan

  Hi viral_02,

  The resources below provides a few for the SuperDrive USB troubleshooting steps.  Click on the link to see all the possible symptoms and solutions, including resetting the system management controller.

  Get help with the SuperDrive slot on your Mac computer loading

  If the problem persists, Contact Apple or an provider of services authorized Apple, or make an appointment with an Apple Retail Store additional diagnosis, evaluation, or service.

  Take care

• I installed Windows XP on my new computer (with Windows 7 PRO), but my USB does not work on Windows XP. It works fine on Windows 7

  I installed Windows XP on my new computer (with Windows 7 PRO), but my USB does not work on Windows XP. It works fine on Windows 7.

  Hello

  And much more: (XP mode requires professional, Ultimate or Enterprise).
  

  Get all the benefits of Windows 7 and continue to take advantage of your investments and more
  business and productivity programs that require a PC running Windows XP.

  Note: Windows XP Mode requires a download.
  http://www.Microsoft.com/Windows/Windows-7/features/Windows-XP-mode.aspx

  Windows XP mode
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  Windows XP Mode is supported through Technet

  TechNet - Forums - Windows 7 virtualization
  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP laptop - 15-r101na: hp 15-r101na win7 64 bit usb does not work

  Hello

  I got hp 15-r101na to win 8.1 to win7 64-bit, and you have a huge problem, all the usb ports does not work (although they provide the power).

  I was unable to update the drivers through the "Device Manager", windows just not finding them.

  I tried to download the drivers from http://support.hp.com/us-en/product/HP-15-r100-Notebook-PC-series/7234951/model/7429481/drivers#Z7_M... , but it did not help.

  Maby someone could recommend third-party drivers, or another solution?

  best regard,

  ArnoldasGr.

  Hello:

  USB 3 of the HP 250 G2 driver should work...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5449369&swItemId=ob_132256_1&swEnvOid=4059

• [Inspiron SE 7720] UEFI boot from USB does not work

  Hello

  I just bought a Dell Inspiron 17R 7720 special edition. It came with a Windows preinstalled 8 (up to 64 bits and mandatory boot UEFI). I want to use Linux (specifically, Archlinux) for the work and Windows for games, so double boot is necessary.

  I'm almost finished installing Linux except for the boot loader: I need to start Linux from UEFI and has failed to do so far. Here's what I did after I got the PC:

  • Secure Boot disabled;
  • updated the BIOS to the version A12 (maybe I shouldn't...);
  • resized the main Windows partition and created a few partitions for Linux;
  • legacy startup mode and managed to start an installation of Archlinux MBR bootable USB drive.
  • most of the system installed
  • switched back to UEFI boot mode, Secure Boot off.

  At the moment, I needed the UEFI kernel startup Setup Bootstrapper to have access to the EFI environment variables. So I created an installation of Archlinux UEFI-bootable USB drive (with a FAT partition) but so far I could not able to boot successfully to this car of UEFI instead of Windows 8.

  I think I tried every single combination, such as:

  • different USB ports;
  • different startup entries created with F2 installation boot, with different parameters.
  • different commands for start-up entries;
  • has hit my startup entries directly in the F12 boot menu.

  Anything in the startmode of the system always the Windows partition UEFI.

  Also, I couldn't find any relevant documentation manual or software on the A12 BIOS on the Dell site, I missed something?

  The solution that the user described in this thread for UEFI boot on a DVD has not worked for me with a USB key.

  If anyone had the same problem or has a solution or even information about it? UEFI is really starting to give me headaches on this machine!

  Thank you for reading.

  Try to go into the Advanced Boot Options.   Hold down the SHIFT key while as a RESTART to win 8.  This will get you to a page that will have an option called "Other devices" (from memory).    Choose that and you will have all features of the device as USB. First of all give it a try and I'm sure there is an easier way to start Linus directly more later.

• Satellite C50-A-157 Sandisk USB does not work in Recovery Media Centre

  I can't get Sandisk Cruzer USB to work in recovering from the media library. Have tried formatting but no luck.

  I read on another forum of Toshiba that Sandisk USB keys do not work and you need to use another brand.

  Anyone know if it's true?

  Thank you

  To be honest, I don't think that any USB Sandisk flash memory sticks don't work with Recovery Media Creator. But of course because of a problem of compatibility between the device and the software, it is possible that a USB flash memory stick would not be recognized.

  I have never known such problems with my Recovery Media Creator software.
  I could create a recovery media using two different USB sticks from two different manufacturers. One of them was a SanDisk flash memory stick.

• Satellite Pro 4270 - USB does not work

  Hello.

  I had this problem for a while, and I was wondering if anyone had any suggestions to solve this problem.

  I have more or less of work Satellite Pro 4270 (4200 Series) computer laptop with XP on it.

  The USB port does not work. I don't know why it does not work. I tried to replace the USB module on the motherboard that has not worked. I've updated the BIOS to the latest version, has not functioned. Removed and reinstalled the drivers in XP, not worked. I'm out of ideas.

  IrDA works very well.

  Some suggestions please. Thank you

  Hello!

  I understand, were you solder the module USB motherboard and then solder another module?

  I mean, what have you done with the module USB, replacing? Sorry, I don't remember exactly how the USB module is connected to my mobo SP4270 seen last about the half a year ago... If the welding, I don't wonder the problem... but if not, there may be a solution...

  Best regards

  Pete v.

• HP 260 G2: USB does not work with W7 x 64 installation ENT

  I have a new G2 of 260 HP, when I proceed to the installation of W7 x 64 USB business, after th e first loading, USB devices does not work. I tried with the utility of th 'Installer_Creator' from Intel, but with the same result.

  You can someone help me with this issue?

  Thanks in advance

  Mauro Caputo

  Hello:

  You must run this utility...

  https://Downloadcenter.Intel.com/download/25476/Windows-7-USB-3-0-creator-utility

  Your only other option would be to use a PS/2 keyboard and mouse to complete the installation and then install the drivers for Chipset and USB3 you need.

  or see this post for an alternative solution.

  http://h30434.www3.HP.com/T5/business-PCs-workstations-and-point-of-sale-systems/HP-prodesk-600-G2/m-p/5485092#M11107

• Re: Satellite C660 - One USB does not work

  Hello

  As the title says, I have a c660 that has only a working USB port. The other is dead and has been dead since day 1.

  I tried to uninstall the USB controllers, re-boot and allowing the automatic hardwarediscovery run and install again. This has not solved the problem unfortunately.

  I am running windows 7 by the way.

  Another had a similar problem or has any ideas?

  Thank you

  TFM

  If only a single USB port does not work and if the other is OK then I think it is a dysfunction of the USB port and not related to any software.

  So in this case, I think you should visit the ASP from Toshiba for a verification of the motherboard.
  The USB ports are part of the motherboard and possibly you need new mobo.

• HP Probook G3 450: USB does not work

  I formatted my hard drive and installed windows 7.

  None of the usb drives to work. It is common in the sub player but nothing appears in Windows Explorer, when I plug in a flash drive. When I plug in a mouse, it does not work.

  It is a platform of Skylake has no USB 2.0 driver for Windows 7 does not work. You must install the USB 3.0 driver and probably a lot of other drivers, as well.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7834518 & swItemId = ob_163291_1 & swEnvOid = 4060

  There is a whole page of WIndows 7 supported for this model.

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=7834518 & lang = to & CC = US #Z7_3054ICK0KGTE30AQO5O3KA30B3

  Make sure that the drop-down menu to select the operating system is set to Windows 7. I assume that you have installed the 64 bit version.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Nighthawk AC19000 sound Readyshare USB suddenly not working not

  Hello

  I have a scandisk USB plugged into the USB3.0 port that worked for more than 1 month.

  Suddenly, the reader is therefore more accessible. I tried to connect another external hard drive and got the same results.

  When I use the genius NG may not find the USB drive.

  The two discs are finding work when connected to my pc.

  I have reboated the modem.

  Usb ligth comes on when I plug in the external hard drive but not the scandisk USB.

  I use the Readyshare function to listen to the music via the Sonos application.

  Thank you

  Luke

  Hi lamluc01,

  Please reset the default router and reconfigure it manually. Furthermore, what is the version of the firmware on the router? If you happen to have the 1.0.6.28 firmware version, you can try to go back to v1.0.4.30 if the reset did not work.

• HP Pavilion usb does not work with Windows 7

  I have HP Pavilion dv9910us. I've updated from Vista to Windows 7 Ultimate 32 as soon as he was released.

  It worked fine until a couple of weeks. My two side usb drives stop working. When I plug something in them their power led lights, but they do not appear on the computer. I tried to uninstall the hub USB root, but that did not help. Today one of the USB ports on the right side has begun to do the same. Which leaves just a USB port work.

  I think to go back to Vista and see if they work, but I don't want to unless there is no other way.

  Someone at - it solutions.

  It is also a good way to decide the question.  So you have narrowed down to the bottom of the system board.  In the meantime, you can always pick up a cheap USB hub that would give you more ports.  Or ask a Santa.  Happy holidays.

• 17-e112dx HP: hp 17-e112dx usb does not work

  I install the new Windows 7 64 bit on this computer: HP 17-e112dx.

  But the USB 3.0 port does not work.
  What can I do?

  Hello

  Here is the link to download the driver USB 3.0 Chipset for your windows operating system 7

  https://Downloadcenter.Intel.com/download/21129/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-7-series-C216-chipset-family

  Write back to us if you need additional assistance. I hope it will work.

  Although I work for HP, but I am personally.

  Please click "Accept as Solution" If you feel my post solved your problem, it will help others find the solution. Click on the 'Bravo Thumbs Up' on the left to say 'Thank you' for helping!

  Concerning

  Aks3621