Essbase add existing aggregation views

Similar Questions

• Essbase "add to the existing values.

  It must add value to data Essbase using ODI.
  For example: in the Essbase cell is a value of 10. In a source of 5 should be in cell 15 Essbase.
  The procedure as a data load using the Essbase rule where I can put the parameter "overwrite the existing values" or "add to the existing values.
  I can do using ODI?
  
  Of course, I can export Essbase Data Oracle DB, compute new values and return to the Essbase charge. Can be easy way?
  
  Thank you.

  Hello

  In your interface and under the IKM "IKM SQL for Hyperion Essbase (data") there is an option for a rule to load "RULES_FILE".
  This means that you can use a rule to support essbase, in the State of charge you can set under "Data loading settings" > "add to the existing values.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Can not change the configuration of the e-mail pop up account when add existing e-mail account

  As says the issue I can change the name, but not the fields email and password in the first box pop up that appears when you add an existing e-mail account. Seems to be a bug in the pop-up edition regardless of the new account is.

  have you tried to simply type in the box. the email@example,com immediately disappears as type in the box. Same for the password

• Import the MAX configuration settings file replace or add existing entries of MAX?

  Hello

  Importing a .nce in max replaces the existing configuration of max with the imported config or import adds new MAX to MAX existing elements (so that both the 'old' and "newly imported" config can be used.)

  One or both! (sometimes none)

  in the Import Wizard, you can select what to import and what to do about the elements that are in conflict or exist with different information.  (NOR really did a beautiful job - for equipment OR!)  for some things (like Pickering VXI devices) you are unable to import the MAX settings.

• How to change the existing terminals 'view as an icon' to view data by program type

  I had a few LabVIEW code inherited from someone else. And there are tons of existing terminals, displayed as an icon. Is it possible to batch process to change all of display them as data type?

  Thank you very much!

  I created a VI that changes all that.

  Run the VI.  Go to any block diagram you want to disable the view as icons setting.  Then click on the button in this VI.

  I also created a version using the right-click framework, but I don't have access to the computer that has this code at this time.

• How to add the Web view in the screen.

  I want to add the text at the top of the screen and the Web view that open site in the lower part. Please help me that how can I do this.

  Thanks in advance.

  "I want to make the request and build BB JRE 4.7.

  No you don't really have.

  And you shouldn't, because:

  (a) as much as I know there is no performer 4.7 devices that cannot be upgraded to 5.0

  (b) the proportion of 4.7 devices autour is very small, so it is a small market

  (c) there is a lot of work

  (d) the results are not as good

  (e) a person on this forum will be able to help you.

  RIM do not support the OS 4.7 for WebView, so if nothing else has convinced you, it must give the impression that you should not try to develop for OS 4.7.

  Edit:

  Really should have said that it is just my opinion...

• Smartphones blackBerry Email Setup - Option Missing to add existing emails

  Hello

  I use a Blackberry storm 2 9520 / on O2 Germany. I recently tried to set up an email on my phone (Hotmail) account.

  -L' e-mail setup wizard shows me however that option:

  "I want to use a professional email with Blackberry Enterprise Server account"

  -It does not show me the option: "Add an existing email account option" (as mentioned in your E-mail configuration page: http://us.blackberry.com/support/blackberry101/setup.jsp#tab_tab_email )

  Can you please guide me here?

  Hi and welcome to the Forums!

  To use the Push RIM owner messaging capability, you must have an adequate data of your carrier plan. Carriers BIS (BlackBerry Internet Service) host for their BB users. In general, BIS is not available through generic data plans. Several ships make stop what is needed the Blackberry data plan. Whatever they call it, it is the carrier that delivers BIS users of BB - contact - the for assistance. Once you have a compatible BIS data plan on your BB (fees regardless of your carrier will charge, btw), then you will have personal email added to the e-mail Setup Wizard.

  http://www.BlackBerryFAQ.com/index.php/What_do_I_need_a_Data_Plan_for%3F

  Good luck!

• Add existing web page to dreamweaver template

  Hello

  How to add an existing web page created before the model has created a model Dreamweaver, I created my index page?

  I use Dreamweaver CS6

  The index of test file has a header and a column on the left with links and then a contained right column and footer.

  The content column has "editregion4" on it, so is locked. I want to update other areas and have other pages that I created prior to the model being created was updated too.

  I created the index.dwt model and saved as index.html

  I have update the model and updates the index.html page too. So far, but so good...

  I created separate pages to test how to add to the model without changing the "content" section.

  Question: How do I add the other pages that I have created?

  These are just the test pages. The next page is called: about.html and I added some random text in the content area that I want to keep.

  The only areas that would update are the header, column and footer to the left.

  Another question: would you have only the one file model?

  What I would like.

  David

  Would you only file one model?

  Yes. It makes the management of the site a lot easier if you stay with a Template.dwt.

  A well-designed template everything including your site have some items may not appear on all pages of the child.  Some examples are slideshows, galleries or calendars. This is where the optional regions come into play.

  Use Dreamweaver templates to create a presentation

  Nancy O.

• Can we add existing 5.1 to 6 Vcac Vcenter

  Hi, I want to add my existing environment from Vcenter5.1 to Vcac6 which has a lot of production THAT VM is - this recommended? Otherwise, I need to build a new environment vsphere environment my Vcloud?

  You can add vCenter 5.1 to vCAC 6 as its supports it. No trouble there.

  If this is to test the goal then I recommend to set up an another vCenter and add it. If its use prod, you can go ahead and add it and later you will be able to manage computers through cloud.

  Here's a pdf of reference compatibility matrix.

  http://www.VMware.com/PDF/vCloud-Automation-Center-60-support-matrix.PDF

  Check under hypervisor management support

• Add existing hard drive peripheral invalid... vmx-08, required min is vmx-09

  I had a VMDK file and I can't add to the same virtual machine it is just attached to the past.

  I get this error.

  This virtual disk has been copied form an ESXi host without converting them. The option, I can think of are:

  1. Add a new virtual disk on the virtual computer and file name of the new virtual disk in the configuration (.vmx) file and replace the existing file descriptor hard name. Ensure that VMware Workstation or at least tab of the virtual machine is closed when you edit the .vmx file, so it will be re-read of VMware Workstation.
  2. Use the vmware-vdiskmanager command-line tool to convert the virtual disk to a format of VMware Workstation.
  3. Change the file descriptor as shown below (most likely not supported, so be sure that you have a backup of all files hard)

  # Disk DescriptorFile

  version = 1

  Encoding = 'UTF-8' --> = "windows-1252" encoding

  CID = 8a43c1b1

  parentCID = ffffffff

  isNativeSnapshot = 'no '.

  createType = "vmfs" --> createType = "" monolithicFlat' "

  # Description of the measure

  VMFS RW 1468006400 '% OURSERVER%flat.vmdk' --> RW 1468006400 FLAT '% OURSERVER%-flat.vmdk' 0

  # The database disk

  #DDB

  ddb.adapterType = "free".

  DDB. Geometry.Cylinders = "91379.

  DDB. Geometry.Heads = "255".

  DDB. Geometry.sectors = "63".

  ddb.longContentID = "fab1ab5a6dcc52db8dc07b4b8a43c1b1".

  DDB. UUID = "60 00 C2 97 ff 55 b6 26 - 76 d2 7A 0 b e5 2d e3 c9.

  ddb.virtualHWVersion = '8 '.

  André

• Add existing ESX without formatting data warehouses

  Hi all, I am new to scripting, trying to find a script that adds disks to host ESX just as we do on vcenter.

  Rescan Disks - storage add - select disk/Lun - naa ID is known - Keep existing signature - finishing

  Scenario is that: I have 50 + replicated discs that I have to import the site of recovery with a known naa.ids

  Lun ID as below:

  Disk Fibre Channel (naa.500506680180831a8000000000000505): 1

  Disk Fibre Channel (naa.400503480180821a8000000000000502): 1

  Disk Fibre Channel (naa.300503380180811a8000000000000511): 1

  Disk Fibre Channel (naa.200502280180851a8000000000000435): 1

  ...

  ..

  Let's say I have 2 ESX hosts nonclustered.

  ESX1 and ESX2

  How do you want to add these 50 disks to the ESX host with a powercli script?

  I'm working on this problem awhile, but could not find a satisfactory answer.

  PS: Keep existing signature is not a must, could be assigned a new signature. All I need is not for formatting the disk cause there no are data inside.

  Thank you...

  It's what

  $esxcli.storage.filesystem.mount

  allows you to do.

  Take a look at Management VMFS volumes

  You can do the same thing, with the same settings, with the Get-EsxCli cmdlet

• Essbase Add-In

  Small Question:
  
  Can add essbase 11.1.2.1 be installed on a Mac computer?

  There is no mac :) version

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Get "specified VMs is not found" when using Add-ManualPool in view PowerCLI

  Add-ManualPool-pool_id MyPoolName displayName - MyDisplayName - powerPolicy AlwaysOn - autoLogoffTime immediately - isUserResetAllowed 1 - allowMultipleSessions 1 - vc_id ' % IDREMOVED % ' defaultProtocol - PCOIP - allowProtocolOverride 1 - id ' VirtualMachine-VM-75557 "»

  This is the command I am trying to use.  I am just running directly in with the cmdlet view loaded PowerCLI powershell command window.  The Virtual Machine name (-id) is obtained using the command Get-DesktopVM, so I know it's good.  I tried with a couple of virtual machines.  The query Get-DesktopVM also States that isInPool = false so that can't be buggered me upward.

  Here is my result when you use the command above.

  Add-ManualPool: PowershellService::AddManualPool FAILED, error = one or more of the specified virtual machines is not found. Continued lack of VM-75557
  On line: 1 char: 15
  + Add ManualPool < < < < - pool_id MyPoolName displayName - MyDisplayName-AlwaysOn - autoLogoffTime immediately - isUserResetAllowed power politics 1 - allowMultipleSessions 1 - vc_id ' % IDREMOVED % ' defaultProtocol - PCOIP - allowProtocolOverride 1 - id ' VirtualMachine-VM-75557 "»
  + CategoryInfo: InvalidResult: (vmware.view.pow... s.AddManualPool:AddManualPool) [Add ManualPool], Exception
  + FullyQualifiedErrorId: PowershellService::AddManualPool FAILED, vmware.view.powershell.cmdlets.AddManualPool

  Thanks in advance for any guidance.  It seems that everything simply, it does not find the virtual machine... but the name is correct, and various data collection 'get' commands work with this ID. VM unfortunately, not much good information out there on view PowerCLI and diddly for Add-ManualPool examples.

  Just tried this and I think that the field id is case-sensitive - you must use a virtual machine in tiny i.e. VirtualMachine-vm-75557

  Mike

• How to add existing members of creative cloud to cloud creative teams

  I have a group of creative cloud members who wish to settle in creative cloud for teams. So after that I subscribe to CC for teams and add the CC members, what happens to their composition settings and account existing CC?

  Or is there a way to "convert" existing members of CC to CC for teams?
  

  Hi dmgendron,

  If you have an individual membership of creative cloud, you can re-enroll as part of your business team membership and cancel your individual membership without penalty. For more information, please visit http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html?a1.

  Kind regards

  Romit Sinha

• Add total to view table

  Hello
  
  I add a total to the table view, there is no problem. It is written "Grant Total" as default.
  
  and I click on "format of labels."
  
  new window open,
  
  I write new value 'TOTAL '.
  
  and I get error EIRWWH9E
  
  Please please notify

  Hello

  Sound know a bug in obiee11.1.1.5.0 version and this problem has been corrected in OBIEE 11.1.1.6.0

  BUG: 11772408 -ERROR XML IN a TABLE crossed DYNAMICS WITH TOTAL IN TRYING to LABEL formatting

  check my oracle support:
  OBIEE error: "bad Xml Instance! Error codes: "Eirwwh9e" when you change the label Total column Pivot [ID 1378892.1]

  Thank you
  Deva