Essbase database size

Similar Questions

• Essbase database has exploded!

  Hello
  
  We have an Essbase database, which was about 1.9 GB until a few days back. Recently, the scenario dimension was dense to improve performance. This should have resulted in the total number of blocks and increased the block size. In our case, that the total number of blocks have increased several times - that is why the size has increased 2.5 times. There has been an increase in the size of our block (which is something that is understandable).
  
  Hourglass has also changed hourglass on stick model. I don't know if this would have caused this.
  
  There has been no change in outline.
  
  We are still investigating, but any input would really help get to the bottom of this.
  
  Thank you
  
  Amol

  You say that the number of level zero blocks has increased. that does not make sense to me that the number of intersections would remain the same and making the dense dimension, could increase the block size and reduce the number of blocks. I think something else is happening.

  You can take a level zero export of the database (I would format column) and look at the values there. I guess that since it is a writeback (planning) application that users load zeros causing the expansion as you describe. I created routines that pass through and change the zeros are missing and have decreased the number of blocks.

  Another possibility is a calc script which create blocks on the equation on or a formula that causes blocks to be created. One of my friends just having a database go to page over 100 files (before running out of space) of a formula that created blocks. He took the formula and the database is returned in a single page file and a few second calculation. Changing a dimension of sparse dense could affect your formulas and claculations.

  I know will say you that you don't have control over the change, but it's the way you need ALWAYS to test these types of changes on before going to production

• EAL: Create error Essbase database

  Hi all
  
  I am confronted because of EAL Bridge to create the essbase application. using the version 11.1.2.2. Please let me know if anyone has idea about this error.
  
  Message board:
  Validation is performed successfully
  Mapping data is reloaded with success
  Error: Could not create the Essbase database
  
  Thank you
  Kiran
  
  Published by: kirannch on October 9, 2012 18:04

  In the registry on the essbase and EAL servers go to

  HKEY_LOCAL_MACHINE\System\CurrentControlSet\TCPIP\Parameters

  Add the following DWORD key with decimal values

  MaxUserPort: 65534
  TcpTimeWaitDelay: 30

  Restart the servers

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Essbase database

  Hi all
  Can we archive essbase database dev and use it on essbase server in production?
  Thank you
  Maury

  Essbase artifacts such as contour, rulefile calc script and script report servers are compatible n/b.
  Essbase .ind and .pag files to data files are not different servers compatible n/b.
  Will any archive Archive files schema and data.
  You can't restore in different servers as data files are not compatible.

  If you want to move an application to another server, first migrate the structure by using the Migration Wizard and then load the data from the export of lev0 of the first server.

• How to refresh Hyperion application after you migrate Essbase database?

  I want to copy my planning application from one machine to another (with exactly the same operational systems)
  I did it by database Archive
  
  1. on the original machine
  EE: Application-> database database->(Right click menu)
  
  2 copied the file archived on the target machine
  
  3 on the target computer
  create THE SAME application in hyperion planning and done as follows
  EAS:application-> database database->(Right click menu) Resrore
  
  @Refresh succeeded to @.
  And changed the outline in EAS
  
  But nothing changes in the planning application. How to refresh the planning scheme?
  Thanks in advance

  John is correct, I totally missed the detail that you archived of essbase database and makes the automatic assumption that you had saved/archived planning of the SQL database.

  The "schema" in a planning application is 'stored' in planning using the SQL repository. The Essbase outline is the analytic representation of this sketch of planning.

  To really migrate a planning application, in a way or another, you must copy the repository SQL planning in the application you are setting up, and then refresh to Essbase so going this route.

  Sorry for the confusion

  Kind regards
  Robb Salzmann

  SSO

  FWIW, here is a list of the major steps that I used in the past to migrate 9.3 - 11 Planning (manually):

• Backup Application Essbase, perform the export level 0
  
• Backup database to Application Planning
  
• An inventory of safety, dimensions, performance parameters, forms and States
  
• 11, create the new application with the same Types of Plan, same currency and set of business rules
  
• Stop planning in the 11 database object, move, to re-create the database object and import 9.3 database
  
• Apply upgrade SQL scripts
  
• ALTER table to reflect the version and Shared/Server location
  
• Start the Application and validate the inventory
  
• Import level 0 in Essbase
  
• Test

• Essbase database error

  Hello world
  
  I am trying to restore a planning application, and after you restore the successfully .dmp file, I am creating the workspace Essbase database: Administration-> manage the database-> check "Database"-> Create-> create; the process fails to step 31 90 with the following error message:
  
  com.hyperion.planning.olap.HspVerifyOutlineException: check the plan failed with the following errors:
  Error [102000000] detected in Member "Rem_SL": level 0 virtual members must have a formula associated with them
  
  The specified member is part of the sketch of the Plan2 and Plan2 (kind of regime) contour appears blank in the EA.
  
  Any help would be greatly appreciated!
  Thank you!

  or log in Oracle support and paste

  * Error "error [102000000] detected in Member 'XXXXX': level 0 virtual members must have a formula that they are associated with" occurs when a planning Application [ID 833958.1] refreshing *.

  The defined attribute (UDA) user of HSP_UDF has been configured for the Member in question through the planning of Hyperion Web client.

  It is necessary for the HSP_UDF UDA be configured directly via the Essbase outline because the formula of Member has been configured by the Essbase outline.

  The HSP_UDF UDA must always be enabled in the Essbase outline as the main point of the UDA must say planning member formula has been entered directly in the Essbase outline.
  Solution
  To resolve this follow the steps below.
  * 1. Remove the HSP_UDF UDA, which was entered for the Member in question via Hyperion Planning Web client.*
  This can be done through the Administration > Dimensions > select a Dimension in question > search for members in question > select a member > select Edit > select UDA tab and remove the HSP_UDF of the saved selection.

  * 2. Select the HSP_UDF UDA directly via the Essbase outline. This can be done through Services of Essbase Administration > Applications > contour > Select, right-click on the outline and select the option to edit > search for members involved in the sketch > right-click on the Member and select member properties > UDA > HSP_UDF enter the affect and the hit OK.*

  * 3. Update the Hyperion Planning database by logging into Hyperion Planning WebClient and return to Administration > manage data > select options and click on Refresh.*

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• SmartView 'Calc All' corrupted script Essbase database

  I'm not sure that anyone has any experience of this incident before. We have end-users with the SmartView Excel of Hyperion Planning installed plugin. By default, there is an option of script that end users can click on the ' Calc all "to run.
  
  In one incident, the user pointed out such a script to run on backend Essbase database 'Calc All'. As the work batch is quite laborious, we stop the lot via the Regional service console. But after the batch is stopped, we found that any level 0 data source disappeared - total lost! We tried to find a way to recover but without success. Finally, we need restore the full backup.
  
  We checked with our Oracle consultant locally and they mentioned that, to stop a batch to the service console Regional is the right way to do it. It should not corrupt the database.
  
  In any case please avoid accidental command running that script you use SmartView and Essbase. You should not prevent the lot via the Regional service console.

  I don't know why an Essbase Calc default caused your data away, or why you couldn't stop him.

  The problem with the planners of planning is to have this Essbase calc access. Why? A mystery.

  An easy way to make sure a default Calc is not make havoc is to edit the Calc by default in the EAS do a right-click on the database by choosing together-> default Calc and removing the ALL CALC; It is here and in just a '; '. (without the quotes). This will validate yet but does nothing.

  Kind regards

  Cameron Lackpour

• How to calculate my database size in essbase

  Hello

  Below the my database and Member cube dimension

  Dense1 - 143

  Dense2 - 19

  Dense3 - 23

  Dense4 - 5

  Sparse1 - 9

  Sparse2 - 62

  Sparse3 - 9

  Sparse4 - 163

  Sparse5 - 52

  Sparse6 - 6

  Sparse7 - 358

  Sparse8 - 48

  Dimension = 143 * 19 * 23 * 5 = 312455.Block dense size = 312455 * 8 = 2499640.

  Sparse dimension = 9 * 62 * 9 * 163 * 52 * 6 * 358 * 48 = 4388773529088.

  Block size = 2499640 * 4388773529088 = 10970353864249500000.

  I saw my database statistics, it seems that the block size is "2357520".

  Can you please let me know, how to calculate the size of block on my database. Please specify the dimension members.

  Thanks in advance to everyone.

  Kind regards

  Sisi.

  The dense dimension members that you specified are all STORED in nature or is he as well stocked as well as dynamic calc?... The computation of block size, you should consider only stored in the Dense breast... Still, you can find several members stored Regional service console, by going to the database-> Edit-> Properties tab and database.

• HPCM Essbase database deployment problem

  everything by deploying bases of calculation and data declaration while deploying in updating database mode we get error ' error determining export type: Essbase Cube.

  Please note that we have deployed the application of EPMA but while deploying of Essbase, we receive error.

  We tried to deploy the databases using mode replace but it didn't work as well.

  Thank you.

  Try to delete the application of essbase (seized backup level zero data and manual script created before to do), and then to deploy application EPMA HPCM using replace.

  I also suggest you to relaunch a SR with Oracle parallel.

  You can also copy HPCM newspapers as well as for the error.

  Thank you

  ~ KKT ~.

• the essbase database access issue: Essbase cannot allocate enough blocks to perform the calculation

  Hello

  I have a problem with my report and smartView and I have this error:

  «Query execution error: error: internal error Essbase JAPI: [(1012700): dynamic calc processor cannot allocate more than the blocks [1982] CAs.]» The parameter CalcLockBlock is too low or the size of data cache setting is too low. Increase the setting of the CalcLockBlock or the size of data cache setting and then try again"

  
  

  Block size: 51648

  
  

  CalcLockBlockDefault: 10000

  CalcLockBlockDefault: 20000

  
  

  Thank you.
  

  Try DynamicCalcCache 199 M in cfg, recycle essbase services... and check

  See you soon!

  SH! going

• How to export Essbase by size?

  Hi, I have a questions.

  I'm working with Essbase / Hyperion 11.1.2.0 on Windows Server 2008 Standard Edition.

  I want to make an export by dimension - as required by my client/user. However, I looked on the documentation sought on script MaxL and no good news.

  All I have is the full export (all dimensions). Is there someone at - he never experience, please share and thank you very much.

  Hello

  Please use the below URL to extract the size of ESSBASE. His third-party tool, click downloads on the left side of the download page.

  http://www.appliedolap.com/free-tools/outline-Extractor

  Purpose of reference - http://www.orahyplabs.com/2012/02/excel-based-essbase-outline-extractor.html#.Uhs1VtI3CSo

  Thank you

  Prakash

• For Essbase databases

  Hi team,
  If I use only Essbase with Shared service/APS and EAS, can you please confirm that we require only a single EMP 11.1.2.2 schema? Have we not need individual patterns for SS and EAS? I am aware that in earlier versions, we must separate schema for SS and EAS. Isn't it the same EMP 11.1.2.2?
  
  In the earlier version (11.1.1.3) I also never used to provide database information in the Essbase server configuration, but 11.1.2.2 it looks like, to provide the login information for EMP referential system.
  
  Please advice. Thank you for your help in advance

  It is entirely your choice, it's that you want to use a schema or multiple schemas, personally I prefer to use multiple schemas as it makes life easier for the recovery and the resolution of problems.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How can I create a connection of essbase database file?

  Hi all
  
  How to create a web database connection file w analysis essbase in the workspace or in the studio of web analytics?
  
  Thank you.

  It is recommended that you create a data source connection Essbase Studio WebAnalysis. Later it is available from the workspace.
  You can move using file-> New-> database-> analytical Services connection

• problem with not setting is not unicode mode in the Essbase database schema

  I get this error
  
  Rule reading information SQL for the database [DP]
  Rule of reading of the purpose of the database rule [DP]
  Active parallel loading: [1] block to prepare the discussions, block [1] write discussions.
  Loading data encoded in Unicode application in mode non-Unicode is not supported
  Unexpected error Essbase 1003048
  
  
  I also I migrated my applications in unicode mode after installation
  
  I have a system using SQL
  
  and
  
  With a 11rG2 Oracle
  
  Please advise
  
  Published by: level according to December 10, 2011 19:07

  So I take it worked?

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• The total size of the backup database and Total database size.

  Hi Experts,
  
  How can I find the size of the size of the database and the size of the backup with only the RMAN catalog help.
  I use Oracle 10.2.0.5. and Tivoli TSM
  
  I have

  Hello

  See this doc...
  http://download.Oracle.com/docs/CD/B28359_01/backup.111/b28270/rcmreprt.htm#CHDBIGHG

  Connect to SQL * for the database you intend to question the backup history.

  Ask the view V$ RMAN_BACKUP_JOB_DETAILS for more information on the backup type, status, and the start and end time.

  The following query shows the history of the backup jobs sorted by the session key, which is the primary key for the RMAN session:

  COL STATUS FORMAT a9
  COL hrs    FORMAT 999.99
  SELECT SESSION_KEY, INPUT_TYPE, STATUS,
         TO_CHAR(START_TIME,'mm/dd/yy hh24:mi') start_time,
         TO_CHAR(END_TIME,'mm/dd/yy hh24:mi')   end_time,
         ELAPSED_SECONDS/3600                   hrs
  FROM V$RMAN_BACKUP_JOB_DETAILS
  ORDER BY SESSION_KEY;
  

  Ask the view RMAN_BACKUP_JOB_DETAILS V$ at the rate of tasks of backup in an RMAN session.

  The following query shows the speed of backup job sorted by the session key, the primary key of the RMAN session. The in_sec and out_sec columns columns display the input data and output per second.

  COL in_sec FORMAT a10
  COL out_sec FORMAT a10
  COL TIME_TAKEN_DISPLAY FORMAT a10
  SELECT SESSION_KEY,
         OPTIMIZED,
         COMPRESSION_RATIO,
         INPUT_BYTES_PER_SEC_DISPLAY in_sec,
         OUTPUT_BYTES_PER_SEC_DISPLAY out_sec,
         TIME_TAKEN_DISPLAY
  FROM   V$RMAN_BACKUP_JOB_DETAILS
  ORDER BY SESSION_KEY;
  

  Ask the view RMAN_BACKUP_JOB_DETAILS V$ for the size of the backups in an RMAN session.

  If you run the DATABASE BACKUP, then V$ RMAN_BACKUP_JOB_DETAILS. OUTPUT_BYTES indicates the total size of backup games written by the backup task for the database that you are backing up. To view the backup set sizes for all registered databases, ask RC_RMAN_BACKUP_JOB_DETAILS.

  The following query shows the speed of backup job sorted by the session key, the primary key of the RMAN session. The in_sec and out_sec columns columns display the input data and output per second.

  COL in_size  FORMAT a10
  COL out_size FORMAT a10
  SELECT SESSION_KEY,
         INPUT_TYPE,
         COMPRESSION_RATIO,
         INPUT_BYTES_DISPLAY in_size,
         OUTPUT_BYTES_DISPLAY out_size
  FROM   V$RMAN_BACKUP_JOB_DETAILS
  ORDER BY SESSION_KEY;
  

  The following sample output shows the speed of the backup jobs:

  I hope this will help...

  Kind regards
  Levi Pereira