the essbase database access issue: Essbase cannot allocate enough blocks to perform the calculation

Similar Questions

• Cannot allocate enough memory to make the current frame

  I use after effects CC last version. I have a 3.4 GHz iMac intel Core 17 16 GB of ram and it has never happened to me before. I served to memory, restart computer. It happens to any project I opened. I can not get a preview of my work. I run mavericks 10.9

  The after effects CC (12,2) update solves this problem.

  Let us know how it works for you after installing the update.

• REP-0065: memory virtual system error REP-0200: cannot allocate enough mem

  HI I am facing this error for some time.
  
  I don't know how to rectify.
  For my report, I use like 7 ref Cursor in the database for the output data. It's been a while that I am facing this error.
  
  I tried several ways to modify my code, but still get this error. When I replace all the code in the RDF itself, then its running fine without any problem.
  I just got stuck with this report. I totally missed ideas to solve this error.
  
  If you have an idea about this error please let me know.
  
  I need to do on the database side. don't know wat to do.
  
  Thanks for posting the solution as soon as POSSIBLE, I must present. I the crazy.
  
  I use oracle 10g Builder. (10.1.2.0)

  Quick search on Metalink returns:
  * [430044.1 ID] reports 10g with a Ref Cursor in Windows platform fails with the error of system virtual memory 200 REP and REP-65 *.
  The solution in this document invites you to apply two patches:
  One-off patch 4505133
  One-off patch 5634746

• Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  Hello

  Our environment is Essbase 11.1.2.2 and work on Essbase EAS and components of Shared Services. One of our user tried to execute the Script of Cal of a single application and in the face of this error.

  Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  
  

  I did a few Google and found that we need to add something in the Essbase.cfg file as below.

  Dynamics Processor Calc 1012704 fails to more blocks ESM number for the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  Possible problems

  Analytical services cannot lock enough blocks to perform the calculation.

  Possible solutions

  Increase the number of blocks of analytical Services can allocate to a calculation:

  1. Set the maximum number of blocks of analytical Services can allocate at least 500.
     1. If you are not a $ARBORPATH/bin/essbase.cfg on the file server computer, create one using a text editor.
     2. In the essbase.cfg folder on the server computer, set CALCLOCKBLOCKHIGH to 500.
     3. Stopping and restarting Analysis server.
  2. Add the command SET LOCKBLOCK STUDENT at the beginning of the calculation script.
  3. Set the cache of data large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH parameter.
     • Determine the size of the block.
     • The size of wrestled data.

  In fact in our queue (essbase.cfg) Config Server we have given below added.

  CalcLockBlockHigh 2000

  CalcLockBlockDefault 200

  CalcLockBlocklow 50

  
  

  So my question is if edit us the file Essbase.cfg and add the above settings restart services will work?  and if yes, why should change us the configuration file of server if the problem concerns a Cal Script application. Please guide me how to do this.

  
  

  Kind regards

  Naveen
  

  Yes it must *.

  Make sure that you have "migrated settings cache of database as well. If the cache is too small, you will have similar problems.

• db_load error: cannot allocate memory

  Hello

  When I try to import a dump file, I always get this error:

  
  

  db_load: BDB2055 lock table is out of available lock entries

  db_load: cannot allocate memory

  I performed "db_load f outdb/outdb2 - h env xass.db".

  
  

  and I put max locks:

  dbenv-> set_lk_max_locks (dbenv, 1000);

  but it does not work.

  
  

  What should I do to avoid this problem?

  Thank you for your help in advance

  
  

  
  

  Mark

  
  

  
  

  Update:

  
  

  I did some tests, and I found that if I increase the number of locks by 'set_lk_max_locks' in the DB_CONFIG file, db_load operation will be a success.

  The point is that the larger db file may need a very high value of locks, then why "db_load" does not release the locks during the ongoing procedure? Is this a bug for the bdb?

  because I can not increase the infinite number of locks!

  If this is not the case, How can I cause "db_load" release of transaction locks?

  Is someone can help me?

  Mark

  Hi Mark,

  If you import a dump file into an existing, open environment with flags of (can be several) DB_INIT_LOCK | DB_INIT_LOG | DB_INIT_MPOOL | DB_INIT_TXN, then it is true, you may encounter the error on "lock table is out of available lock entries" when the dump file is very large. Db_load process will not release the locks because he have to provent other processes to access the database under construction to ensure the consistency of the data in the transactional environment.

  The general average to load a database from a dump file is to specify an empty directory as the base directory. Hereby, the database will be created in a private non transactional environment, and you can copy the database in your environment running once completed the process of db_load.

  Kind regards

  Winter, Oracle Berkeley DB.

• "Unable to allocate enough memory to make the current framework (7::5)"

  I have a new computer ram 32 she's strong, but keep crashing in real-time, etc. 12803 rendered "impossible to allocate enough memory to make the current framework (7::5)".

  

  Because of this support:

  Cannot allocate enough memory to make the current frame

• AMT: cannot allocate memory - is there limit to the databases on a single box num

  Hello
  
  Specification of the server:
  Windows 2008 R2 x 64 with all updates applied
  
  Oracle 11.2.0.1 Standard Edition with Patch 16 applied (which corresponds to all the live database version)
  
  10 GB OF RAM
  
  I have a standby server that has all my databases to watch over him
  
  Recently, I added about 8 new databases on hold to take to 102 and since then I get an intermittent error of TNS. AMT-12531: TNS: cannot allocate memory
  
  I have scripts that loop in all databases one at a time, they start the standby database, apply the new recovery logs archived and close the database
  
  It worked perfectly for years but I started having problems after you have added a few other databases, it probably defective 1-3 times so it is inconsistent.
  
  With all databases only idling server use 6 GB out of the 10 GB RAM available so there is a lot of memory free
  
  If I withdraw half a dozen databases in the scripts, it starts working again.
  
  I created 2 new listeners and divide the databases for the half to run on a single listener and the other half on the other, there are still intermittent outages
  
  Server has been restarted several times and sometimes travel a couple of times before failing and sometimes will fail in the first inning thanks to
  
  Failures are normally towards the end of the script, IE. has applied the newspapers to 95 databases and fails when the 96th!
  
  I reorded the data bases in the script and it still fails at the end, not on a specific database
  
  I also added restarts listeners for scripts that made no difference
  
  I've now changed my scripts, then real windows service does not work for databases and the script makes a net start before applying the newspapers and a net stop eventually. She's now going through without a problem but I would go to the bottom of the issue and keep windows running services in the starting and stopping of their adds time for labour to apply the logs across all databases
  
  Thank you
  Robert

  Have you tried a note

  AMT-12531 on Windows 64-bit [ID 1384337.1]

  I created 2 new listeners and divide the databases for the half to run on a single listener and the other half on the other, there are still intermittent outages

  I don't think that you need several headphones if a listener is enough to support all of your databases running on a server.

• Calc Dynamics Processor cannot allocate more than 350 the heap block of

  Dear users of Essbase,

  I am trying to implement some logic in order to get my calc done by dynamic calc and formula on members.

  My dynamic member calc with formula is not limited to offsetting the conditional statement to the role of alternative only, I see no problem.

  But in order to get the correct result, I include under condition ISMBR statement and restrict level 0 patch replacement on a sparse Member, I get this ' error Essbase (10127000): dynamic calc processor cannot allocate more than the blocks [350] from the jump. The parameter CalcLockBlock is too low or the size of data cache setting is too low. Increase the setting of the CalcLockBlock or the size of data cache setting and then try again '

  IF (@ISMBR (@RELATIVE("ALTERNATIVEROLLUP",0)))

  IF (@ISUDA ("SCENARIO", "XXX"))

  do something...

  ENDIF

  ENDIF

  I looked through this forum and tried to fix my problem in making changes on Essbase.cfg of DATACACHESIZE and DATAFILECACHESIZE values.

  I also checked in the settings of CALCLOCKBLOCK and the error message shows his tent to allocate more than the default value no. blocks that is 350 blocks in my tests.

  I have CALCLOCKBLOCK with HIGH as 4900, settings default than 350. Hope this is good enough.

  As it is on the dynamic calc and formula approach based on, would like to know how to face this question set.

  If you have encountered this problem would like to take suggestions. Thank you.

  Kind regards

  Praveen

  Of course, JM, it was my test script.

  I would like to change my script to be the best :-).

  And I could get rid of the Essbase error in improving more all hides and CALCLOCKBLOCK parameters.

  The operating current system cann't be changed to try chaning type of dimension and other changes required for the TBLAST property. It is one of the obligation that I work. Then try my best to correct and come out with the best solution.

  It is easy to build the new app with fresh demands to try to include new features to the existing system.

  Thanks a ton for your time and your suggestions.

• 3407: cannot allocate space to store the property information for global cache

  Salvation of the experts on the issue of a load in ttisql as follows, statement
  
  CACHE LOAD domain_group GROUP COMMIT ALL 256 LINES;
  
  This exception is thrown, and I can't find anything with google:
  
  3407: cannot allocate space to store the property information for the global cache groups because the space in the partition of the temporary data is less than the minimum threshold of 3000000 bytes--of the Member MG2_alone2_1 of the grid
  
  My my_ttdb DSN is configed as follows:
  [my_ttdb]
  Driver=/home/TimesTen/TimesTen/tt1122/lib/libtten.so
  Data store = / home/timesten/data/database / my_ttdb
  LogDir = / home/timesten/logs
  PermSize = 4000
  TempSize = 32
  DatabaseCharacterSet = AL32UTF8
  OracleNetServiceName = amq_915
  
  The result of cachegroups is:
  
  Group cache CACHEUSER. DOMAIN_GROUP:
  
  Group cache type: asynchronous, Writethrough global (dynamic)
  AutoRefresh: No.
  Breeding: LRU on
  
  Table roots: GTLD_WHOIS_TEST. GTLD_DOMAIN
  Type of table: spread
  
  
  Child table: GTLD_WHOIS_TEST. GTLD_DOMAIN_STATUS
  Type of table: spread
  
  The County of gtld_domain table is 3,005 million records in the gtld_domain_status table.
  
  Waiting for your help, thank you.

  According to the error message you need to increase the temporary data partition which is the TempSize setting in your DSN.

  As point of departure set to 1000 and then to monitor it in ttIsql with the dssize command to see if it needs to raise more or may be reduced after a workload has been run.

  Tim

• Vista Home Premium gives the message "linked to limited accessibility" and I cannot access the internet.

  I have Vista Home Premium and trying to connect to a WiFi spot, I get the message "linked to limited accessibility" and I cannot access the internet. I understand this is common for Vista and there is a fix for this problem, but want to make sure that I get the right one and can't seem to find anything referring to this issue on the Microsoft site

  Hello

  This problem happens only when connecting to a particular place for the WiFi?

  You can follow the suggestions and check out them.

  Method 1

  You can read the article.

  Message when a device on a Windows Vista-based computer uses a network bridge to access the network: "connected with limited access".

  http://support.Microsoft.com/kb/930517

  Method 2

  Disable IPv6.

  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.

  NOTE: You should do this for each network connection.

  Method 3

  Temporary disable your security software.

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Note: Software antivirus and firewall can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attack.

  Method 4

  You can reset the TCP/IP stack.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

• Error: Access is denied, cannot delete the printer and also impossible to install programs

  Original title: access is denied cannot remove the device

  my Canon MX340 printer worked fine until the scanner stopped working advises by canon for uninstall programs / drivers and icon / as asked today did nothing working and used to install programs / drivers and can not remove the icon from the Control Panel, access is denied. Clues

  THX

  Hi Tony,.

  Please help me with the following information pricing to this question:

  1 is your computer and the printer connected to a network or domain?

  2 are logged in as an administrator on the computer?

  3. What are the programs that you are not able to install on your computer and provide also us whne exact error that you are trying to install programs?

  I suggest you refer to the suggestion provided by Waseemulla Shariff said on March 17, 2012 in the following link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/i-can-not-delete-a-printer-from-devices-and/c0d72c68-0387-45ff-b47d-38318b2090b5

  Once you remove the printer successfully, you try to install the printer drivers from your printer manufacturer's website and check the functionality. Consult the following link:

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx340#DriversAndSoftware

  If you are not able to install any program on your computer, I suggest refer you suggestions provided by Sandeep Dsouza said on June 13, 2012 in the following link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/access-is-denied-unable-to-remove-device-HP/1a45f1dd-ba47-47af-90E7-00310a988fcb

  Please answer us on the State of the question to help you further.

• Problem in BBM blackBerry Smartphones - I do not have a display picture bbm Board and the State. I cannot access it and cannot access my photo or status of the contacts Panel

  I don't have a display picture bbm Board and the State. I cannot access it and cannot access my photo or status of the contacts Panel. Help, please!

  Thank you!

  Then you can try upgrading the BBM to the latest version available for your device?

  Make that first make a local backup of your BBM contacts, after backup, delete or uninstall any existing version of your BlackBerry. On your home screen, go to Options > Advance Options > application > BlackBerry Messenger > delete BlackBerry Messenger of this list (highlight BBM press on the menu key and select delete)

  KB10040 : How to view or delete the application installed on a blackberry smartphone 

  Once it is perform a battery pull reboot by removing the battery while your unit is powered, wait a min, then reinsert back.

  Finally, after the reboot, use your BlackBerry browser and go to www.blackberry.com/bbmdownload and download the latest available for your device.

  _______________________________________________

  Please note :

  If you encounter BBM7 or higher then your BBM Contacts are integrated into your BlackBerry ID after installation when you log in with your BlackBerry ID Contacts is restored back, but if you experience any previous Kathy then first make a backup local, you can save on your press card, see this KB for additional assistance

  KB20554 : How to back up and restore the BlackBerry Messenger contacts list

• Access is denied, cannot delete the hp LaserJet 1320 PCL 5 device

  HP LaserJet 1320 PCL 5 can not delete from my PC (Windows 7). Get the message "access is denied, cannot delete the hp LaserJet 1320 PCL 5 device".
  Any help will be greatly appreciated.

  Hello

  Method 1:

  Run the fixit available in the link below and check if that makes a difference

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: Perform a clean boot and check.

   

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  
  Please note:  After troubleshooting, be sure to start your computer in normal mode by following step 7.

  If the problem persists, I will be asked to contact the hardware manufacturer for assistance:

  http://h20000.www2.HP.com/bizsupport/TechSupport/home.jsp?cc=us&lang=en&prodSeriesId=410622&prodTypeId=18972

  Hope the above information is helpful.

• Ask about the segregation of database access by using the authentication of the os in the windows environment

  Hello

  I have a question about the segragation of database access using authentication of the os (like sqlplus "/ as sysdba") in the windows environment. Let me briefly explain my requirement: -.

  Assume that you have two DBA viz DBA1 and DBA2 and 4 resideds of databases in a windows server say A, B, C and D.Now I want to configure it in a way if DBA1 opens a session on the server then it may connect to the database A and B using only OS and DBA2 authentication can connect to database C and D only use OS authentication.

  Please let me know how to configure for this requirement.

  Version of the database is 11.2.0.3

  Hello

  This doc is 11.1 but I guess it's the same in 11.2 roles on Windows and administering external users

  You create a group ORA_SID_DBA and doing it this way - in recent years I have done but it used to work ok...

  See you soon,.

  Harry

• Automate the calculation against Essbase ASO through the calculation Manager

  Hi all

  Anyone know if I can automate the calculation stored in calculation on a cube Essbase ASO Manager?

  I need calculation automated directly against an Essbase cube as it is not a planning application.

  I tried to use CalcMgrCmdLineLauncher.cmd , but it seems not to be able to find the application. I'm assuming that she tries to locate a planning instead of an application of Essbase application.

  Currently I have a number of calculation parameters in the calculation Manager but I would like to automate the process, as well as on a daily basis, the cube is rebuild and recalculated.

  Any ideas if CalcMgrCmdLineLauncher.cmd should work or if there is another method, in addition to my calculations in MaxL.

  Thank you

  Jimmy

  What version? If it's so 11.1.2.3 for Essbase you use a launcher separated in % EPM_ORACLE_HOME%\common\calcmgr\11.1.2.0\lib, calcmgrCmdLine.jar file if it is an earlier version and then probably will need to use MaxL

  See you soon

  John

  http://John-Goodwin.blogspot.com/