Essbase Excel Add-In - Connect is not pop up the sign in box dialague...

Similar Questions

• What version of Essbase Excel add-in supports 64 bit Windows 7 on our PC?

  (1) someone can tell us what is the latest version of 64-bit supplement Essbase Excel 11.1.1.3.x and this latest version of the Essbase Excel add-in will support 64-bit Windows 7 on our PC?
  (2) we downloaded Essbase excellent complement 11.1.2 and could not connect to the server Essbase 11.1.1.3. It gave an error message - "this version is newer than the Essbase server." Is there a solution? (we hoped 11.1.2 would support windows 7 64 bit)
  
  PS. There is a knowlegebase article that teaches us how to get Smartview 11.1.2 to connect to Essbase. We could not quite follow the badly written artible KB, but Mrs. V support Oracle claims that she was able to connect and she wrote the article.
  We managed to get to connect to Planning 11.1.1.3 Smartview 11.1.2!

  The support matrix, it seems as if it was 11.1.2 that currently support your configuration. (this is not to say other versions would not work they just would not officially supported)
  If you get the version warning message you should be able to just click on ok and always connect and recover from a 11.1.1.3 database.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Essbase Excel Add-in question

  Hello

  We have Office 2010 and essbase 11.1.2.2. We are trying to install Essbase Excel add-in on new user, installation works well without any problem, launch Excel, the snap-snap-in, the user can see all Essbase - menu options, however, when the user clicks 'Connect', there NO window of fast connection to come, you have any suggestions or see simiar question?

  Thank you

  I had exactly the same problem. This is what solved it for me. Doc ID 1538600.1 in support of Oracle knowledge base

• Essbase Excel Add-In install - Popup window does not appear for the connection.

  Hi all
  
  I installed customer 11.1.2 Essbase and Spreadsheet Add-Ins 11.1.2 successfully.
  
  After that, I opened MS Excel 2007.
  
  I can able to display the add-ins tab.
  
  Then I tried to connect to Excel with essbase through the next step
  
  -> Add-ins-> Essbase-> connect
  
  I get no popup window inorder to enter the admin username and password. I'm on 64-bit Windows server 2008 and by using MS Excel 2007 32-bit.
  
  Both the s/w have been installed by using the administrator account that the Addin is active and not disabled in Excel Options. I read the related issues and proposed resolutions triggered on this before, but nothing helped.
  
  Can someone let me know anything that I'm missing that could be the cause.
  
  Rgds,
  Sandeep.

  Have a read of - Excel Add In French - Connection dialog box does not appear

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Hyperion Essbase "Excel Add-Ins" are not connected.

  HELLO Experts!
  
  I M using Hyperion 9.3.0 and external authentication (MSAD) for users.
  
  I put in "Server Access" service in the analytical server and "read" permission for Essbase App.
  
  But while I m connect via "Excel add in" with this user, there is an error message "failed to connect due to invalid credentials".
  
  Please any one suugest me the solution.
  
  Thank you
  Vivek
  
  Published by: Jeremy Vivek on June 8, 2010 18:39
  
  Published by: Jeremy Vivek on June 8, 2010 18:42

  Hi Vivek,

  You don't need to restart the service.

  you just need to synchronize the user using the sequence of commands maxl.

  change the resync sss system; --> This command synchronizes all users, groups.
  change the group Security with all applications of synchronization ;--> this can be used to synchronize the group individually
  change user Security with all applications of synchronization ;--> this can be used to synchronize the user required individually

  use the command according to the needs and try to connect again.

  -Krish

• Essbase Excel add-in does not

  Hi all
  
  I installed the hyperion 11.1.2.2 version in windows 2008 server (64-bit system)
  
  Server is in place and works very well. !
  
  I installed the Excel add-in, and then I got a problem here. When I opened excel, Smartview is indicated at the top but Essbase does not appear. I tried so many ways, but no use.
  
  give me some suggestions about solving this issue... !
  
  Thank you
  Mady
  
  Published by: mady on November 27, 2012 11:46

  Mady, I hope that you were not trying to open the supplements directly from Windows. The XLL Essbase XLA work in Excel like Add-Ins, and not as executable files. When I double-clicked the XLL and XLA, I got the Microsoft Security warning, which I assume is what you were doing wrong. You can also google Excel add-ins on the way to handle it if you don't know what to do. It is very simple.

• Essbase Excel add-in on 64-bit Windows 7 and 64-bit Office 2010

  Hello world
  
  I installed 11.1.2.2 on server with Essbase and Shared Services.
  
  Now, on the client, I have 64-bit Windows 7 and 64-bit office 2010.
  
  I tried to install the Excel Addin client only (without customer Essbase) and restarted the computer after installation.
  After that install addin not launched automatically and I tried to manually set the add-in, I get an error "is not a valid add-in.
  
  Is this because I use 64-bit office and need to revert to 32-bit.
  is not supported for the last 11.1.2.2 Essbase 64-bit?
  
  Any ideas or experience in this regard will be useful to me that our society is underway for Windows 7 and Office 2010 through the users and if 64-bit Office is not supported or has problems, I wanted them to go with 32-bit Office 2010.
  
  Thank you.

  Have a read of http://essbaselabs.blogspot.co.uk/2012/04/smart-view-64-bit-office-support.html

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Essbase Excel add compatibility

  Hello
  is the complement of Exel for Essbase in Version 11 compatible with Office 2010?
  We are the Office deployment this year but are currently only using the essbase 7 Add in version

  you roll on a beta version of the software? Office 2010 is not GA yet. If you look at the matrix of support for products, I'm sure, that we won't get the snap-snap-V7 is even compatible with Excel 2007, but many people have successfully deployed.

• How to get essbase excel add in the display of the total cumulative number?

  Version 11.1.2.1
  
  When I connect firstly in my ASO application via the excel add-in, the first thing I see is a null value. My first dimension/column is 'period '. Period is marked as a dynamic calc and label only.
  
  When I drill down in the period I see obviously all rollup values. How can I get the excel to display the full cumulation (instead of having to drill down) when I connect firstly because I like to keep my options as ' delete missing values / zeros "checked.
  
  I see in Sample.Basic is 105522. I want something like that. I tried reloading the numbers and changed the properties without result.
  
  What is the logic behind this?

  If "Period" is marked as 'Label only' it will take the value of her first child, if the first child has a value of #Missing, then "Period" also will display a value of #Missing. If you want to 'Period' to show all the periods (as Sample.Basic does) then you need to take off the "Label" label only

• Where is the download link for Essbase Excel Add-In?

  My client uses v 9.3xxx and the two Windows 2003 Professional (Yes). I can't find a download for Excel Add-In for Essbase 9.3 x.
  
  Is it also available for Office 2007?
  
  Thank you very much!

  Visit http://edelivery.oracle.com/
  Enter the information and click on the boxes, select continue
  BI and select Hyperion Performance Management
  Select Microsoft Windows (32-bit)
  Click OK
  Select Version 9.3
  Download Hyperion Essbase - 9 Release System 9.3.1.3 Client Windows Installer V14763-01 81 M

• Why my laptop with bluetooth connected does not pick up the bluetooth on my laptop

  Windows does not detect the bluetooth on my desire to hdc, someone help

  Hi alia 45

  Make sure that Windows is configured to accept incoming Bluetooth connections.

  Step 1
  You can check the compatible devices Bluetooth configuration panel. Here's how:

  1. Click theStart button, select Control Panel , click hardware and sound , and then click Bluetooth devices .
  2. Click theOptions tab, select the allow the devices to connect to this computer check box, and then clickOK .

  If this step does not help, try the next step.

  Step 2

  Remove and then reinstall the device:

  1. click the Start button, select Control Panel , click hardware and sound and then clickBluetooth devices .

  2 Select the device that is not working, and then clickRemove .

  3. click on Add , press the reset button on the unit (or make it discoverable following the manufacturer's instructions), check the boxmy device is set up and ready to be found and then clickNext .

  4. If the device is not found, repeat the previous step. When the device is found, select it, and then clickNext .

  5. follow the remaining instructions in the wizard.

  ·        Make sure that the device is on and that the batteries should be replaced.

  ·        Make sure the Bluetooth adapter for your computer is turned on and that the device is in use and detectable. If you don't know how to turn on discoverability, read the instructions provided with the device or check the manufacturer's Web site.

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Nelex.

• The Bluetooth connection is not visible on the Satellite A100

  Hey,.

  I have a Satellite A100-797.
  The laptop had Vista Home Premium pre-installed.
  But I have upgraded to Vista Business (32 bit).
  Now my problem is that in Flash cards, the Bluetooth connection is not visible.
  If I press the F8 key on my keyboard, the menu appears when I normally can I enable / disable WIFI and Bluetooth.
  But only WLAN is now visible. I installed all the packages in the driver s page. And I am sure that those who are the most recent.

  Can someone help me please?

  Thank you
  Mathijs

  Hi Mathijs

  Thanks for your second assignment and useful comments.

• 8900 comm http hangs after the second connection (do not view with the 83XX devices or 8900 Simulator)?

  Hello

  I currently have a j2me application that is deployed in production on different devices of BB. The application is pretty simple and mainly collects the data of the user (via text fields, drop-down list boxes etc.) and send these data to our server via an http connection

  The application was deployed in production for more than 6 months and work with end users using various BB devices, like the 8310, 8320 and 9000.

  Our end users now upgrade to the 8900 and we assumed that our application would work in the same way as the 8320-I even tested my app on the Simulator to 8900 and everything works fine.

  However, using the app on a real 8900 device connected to the network Vodafone here in the United Kingdom has cast some weird problems. The app installs fine OTA, communicates initially very well (as we connect via an http post), but then any attempt further communication over http hang everything simply no error thrown?

  Closing the application does not have any change, and blocking any attempt at communication. If I restart the device (battery etc) and start the application then I can connect once more, and then the app just crashes again.

  I can't find the cause, and the fact that other physical devices and even the Simulator to 8900 work very well is weird!

  Any help or pointer to start looking in my code/settings would be appreciated?

  Daniel

  Please make sure you close your connection. or check if the current connection is close before opening another.

• Ipad Cisco ipsec VPN connects but not access to the local network

  Hi guys,.

  I am trying to connect our ipads to vpn to access network resources. IPSec cisco ipad connects but not lan access and cannot ping anything not even not the interfaces of the router.

  If I configure the vpn from cisco on a laptop, it works perfectly, I can ping all and can access resources on the local network if my guess is that the traffic is not going in the tunnel vpn between ipad and desktop.

  Cisco 877.

  My config is attached.

  Any ideas?

  Thank you

  Build-in iPad-client is not useful to your configuration.

  You have three options:

  (1) remove the ACL of your vpn group. Without split tunneling client will work.

  2) migrate legacy config crypto-map style. Here, you can use split tunneling

  3) migrate AnyConnect.

  The root of the problem is that the iPad Gets the split tunneling-information. But instead of control with routing traffic should pass through the window / the tunnel and which traffic is allowed without the VPN of the iPad tries to build a set of SAs for each line in your split-tunnel-ACL. But with the model-virtual, SA only is allowed.

• Info connect/disconnect not saved in the database?

  Hi I was searching through the tables to check the timestamp of a user login and logout of the system, but I can't seem to find it, is this information not stored in the database?
  
  So I went to check the query for the "active users" that I thought that 'this should have any information about this', and I come across this:
  
  < td > SELECT dName,
  dFullName AS wwSctrCHFull_Name,
  dUserType AS wwSctrCHUser_Type,
  dUserArriveDate AS wwSctrCHCr_Date
  USERS
  WHERE NOT IN dName
  (SELECT s.comp_username
  OF s SctAccessLog
  WHERE s.comp_username IS NOT NULL AND
  (Users.dName = s.comp_username) AND
  (s.SctDateStamp > =?) AND
  (s.SctDateStamp < =?) AND
  (s.comp_validRef IS NOT NULL) AND
  (sc_scs_eventType = 'Access content' OR)
  sc_scs_reference = 'web'))
  ORDER BY dName
  < table >
  < td >
  Date of SctFmtFromDate
  Date of SctFmtToDate
  < table >
  
  It is certainly not get 'no active users in period'!, don't stellent really keep the timestamp of the log-in times? According to the present application no.
  
  Thank you

  Because content tracker to track any service, and none of the data transmitted with this service, you can set it up to track (or maybe it's out of the box, I do remember everything on time) the CONNECTION service. For example, you might pay attention to the data passed to the LOGIN function, with a variable named auth. If it is set on the Internet is IdcSecurity. If it is set ot Intranet it attempts to use the Microsoft AD integration (or probably). So you could track that data, and then create a report to show how many connections of each type, you had, etc.

  I don't currently have the installed extranet component sorry. You need find the logout button and see that it has a convenience store. Then you could follow the logouts thus.

  With respect to the actual process of configuration Content Tracker, I'll first you point to the documentation on that and on the back with specific questions.

  Good luck Olivier! Give us an update!