Establishing connection between PC through GPIB-USB_HS and AQ6315-E

Similar Questions

• Connectivity between 8.0.3.6 and 10.2.0.4

  Hello gurus,
  is it possible to establish connectivity between versions of oracle 10.2.0.4 and 8.0.3.6?
  
  Thank you very much
  Charles

  This version is not yet listed in Note 207303.1MOS, so it is not supported.

• Impossible to establish a connection between microsoft router, modem, motorola and dell/windows xp computer

  I have not set up a connection between my computer dell/windows XP, Microsoft router and my Motorola modem. After reading the instructions for the router and set up like it says anything I've set up my computer say it is connected but is not really plugged. My ipod says that there is this WiFi but when I try to access the internet on it, it gives me a message saying "unable to connect to the internet, there no connection detected." The only time where I have Internet on my computer is when I unplug the Ethernet to the router and modem and have the modem only connected to one computer. This problem is can cause because my modem is configured with a cable from cox and not connected to a phone cord? (My router is a Microsoft Broadband networking Base station wireless MODEL: MN-500) (My modem is a modem cable Motorola surfboard implemented with internet helmsman) (My computer a DELL Dimension E521 with a windows XP service pack)

  SP3 is on it? Wireless is enabled on the router? Try this

• Connection between 1510 all-in-one and my laptop

  I just bought the above printer, but it was sold without a connection between my computer and the printer cable. However, my printer previous 2050 all-in-one who died has what appears to be a similar cable but I can not get the impression of working with her. Do I need a new connection? and why?

  Thank you for your help but I took the advice of a previous writer who is returned to the supplier.

  He sold me a rope he was sold as a matter of course with all the printers of this group number. The printer costs R700 and the R68 cord so not a bad deal

• Establish connectivity between storage ESX3.5 and windows Server 2003

  Hello

  I installed the server on HP Blade BL 460c ESX3.5 evaluation copy which has 60 GB of space. I have HP AIO 600 box with 1 TB of capacity and running win2k3 server OS storage. I want to use partion on HP AIO 600 box for all my vitual servers.

  How can I configure NFS partion on the storage win2k3 server and add on ESX3.5 server so that I can even use all virtual servers?

  Do not know the server storage, but I guess that NFS is what you would use

  Check

  http://www.RTFM-ed.co.UK/?p=228

  http://VMblog.com/archive/2007/01/23/using-Windows-based-NFS-in-VI3.aspx

• Cannot restore the connection between the computer wireless laptop and printer

  I have a Photosmart 6510 and a HP laptop computer connected wireless.  They worked together wonderfully since a few months ago, I installed the printer.  The wifi was briefly in standby.  When I sleep and tried to print I get an error message that the printer is not found.  The printer indicates that the wifi is on (blue light is on and the internet window shows that it is connected ad gives all network information, including the IP address.  I tried all my usual electronic bugs: turn the printer off and back on, unplug the printer and let it rest, reboot the laptop, etc.   I am running Windows 7.  With my old HP printer, I get an error message when the printer is offline, that would allow me to go to a "fix" and click to get back online.  I couldn't find this option now.

  Nothing works (the mobile web access so I know it is related also).

  Are there other things I can try before I have to go through the hassle of reinstalling the printer?  I hope there is an easier difficulty.

  And, if I have to reinstall it, I have to write it?

  Thank you.

  I fixed it.  I unplugged the router and the modem, plugged them back in and click on the reset button on the router and the laptop and printer now talk to each other once more.

  There is a problem with this laptop.  Before even I had a wireless printer, I have everything reset completely to the laptop if there is a power failure (but not to the modem in stanby mode).

  My second question is always true since I have to reinstall Windows 7.  Once that I have reinstall the printer do I need to re-register it?

  Thank you.

  Yay for me!

• Remote connection between family windows 7 laptop and vista desktop premium office... it's possible... Thanks in advance

  Can I do it? and how safely if possible... is this possible without charge?

  Hello

  You can connect to the laptop Windows 7 to Windows Vista Home premium desktop using remote desktop, even it's free service, I suggest you go through the following links for more information.

  Connect to another computer using Remote Desktop connection.

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-another-computer-using-Remote-Desktop-connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-another-computer-using-Remote-Desktop-connection

  Remote Desktop connection: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows7/Remote-Desktop-connection-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/Remote-Desktop-connection-frequently-asked-questions

• How to set up a wireless connection between my computer windows 7 and my printer?

  Laptop running windows 7 and HP wireless printer.

  What printer wireless HP do you have?

  Is the printer connected to your wireless network and online?

  If so I just used the software provided from HP who asked me if I wanted to connect to a USB port or wireless router. I choose the option Wireless for my HP J4680 AiO device and the software installed the driver appropriate printer and other associated software, IE. Center solutions HP, etc and I could use my wireless printer.

  Click here to download manuals updated, how - to, of, software, drivers, etc for your machine.

  http://welcome.HP.com/country/us/en/welcome-copy.html#support

  If your printer is not connected to your network, you may need to set up a temporary ad hoc wireless between the printer and a PC. Once you do this, you can enter the printer wireless configuration pages and configure the SSID of the network, wireless, encryption type, encryption key, etc.. Also, FWIW, I have set my HP machine with a static IP address to make it easier for me to access any pages of any PC on my network config.

• Connection between servers and opening default home

  Question about cross-server logon, if a customer has changed their rules of routing so that the default value at the opening of "wishes" is no longer used and a different call handler is used instead, will be this connection between breaking servers? Looks like that connection between servers using backdoor functionality (# and some numbers) which works with the 'Opening of wishes' system, I understand this right?

  No, it is not hardcoded to opening greeting Manager of appeal, but he needs to finish a greeting (whether for a Subscriber or call handler) - the logic is handled in the PHGreeting conversation (the guy that is used for the treatment of the call manager/subscriber wishes) - so if you have a routing rule that say, load the sign the Subscriber in conversation, then you're going to break.

  But as long as the call is handled by _some_ greeting, the hand of logic should work because the conversation PHGreeting is looking for a specific series of TTS to indicate that it is a grip of calls.

• is it possible to establish a direct connection between two computers, one running on windows xp sp2 and other running on windows xp sp3?

  Hello
  I connected two computers, one running on windows xp sp2 and others running on windows xp sp3 via com using RS232 port via link Modem DFM-562E ++.
  I am able to dial numbers from a PC successfully.
  But when I do a direct link between them (one as a host, the other guest) through the com port, I get error 777.
  Is this because the two PC's using different service packs?
  Help, please.
  Thank you & best regards
  Ravi

  It is not the service pack - although you should have installed sp3 now.

  Your message is not clear: have you been able to connect successfully computers using your modem D-Link?  How did you do that?  Will there be a modem in the second computer?

  What cable are you using to establish a direct connection between the com ports on both computers?  If you have purchased this cable online, please provide a link to the site where you bought it.

  Please describe the physical connection between the two computers.  For example, this is how you connect to the Internet by dial-up services:

  computer 1-{(9 broches) RS-232 serial port}-{RS-232 cable supplied with the modem}-{modem}-{phone cord (RJ-11 modular plugs at each end)}-{telephone wall jack}

• Establishing a socket connection between a .swf file and a current-test program (TCP/IP generator - Windows), in AS3.

  I have a problem with a college project, I'm trying.

  Using Actionscript 3, I did a program simple .swf, a smiley face, lively and interactive, which "reacts" number entered in an input box.

  For purposes of this project, I now do the framework for establishing a connection socket with the smiley .swf and another program.

  That's where I run into problems. I have very little knowledge of the AS3 programming, so I'm not sure how the connection - what is required for it, it is.

  To test the connection, I try to use the "TCP/IP builder" program for windows, which allows me to set up a server socket. I need to program the .swf file into a client - to recognize, connect to it, then be able to receive data (so that data then allows for the smiley "react" him--like how he does now with the input-box, 'automatically' as it gets the data, rather than by manual input).

  My attempts at codification it are as follows, with the help of a tutorial (link HERE):

  INSERT HERE THE SOCKET STUFF

  //****************************************************************

  var socket:XMLSocket;

  Stadium. addEventListener () MouseEvent. ( CLICK, doConnect ();

  It connects to the local port, 9001 and applies event listeners

  ( function doConnect ()evt:MouseEvent():void

  {

  Stadium. removeEventListener () MouseEvent. ( CLICK, doConnect ();

  socket = new XMLSocket()'127.0.0.1', 9001);

  outlet. addEventListener () Event. ( CONNECT, onConnect();

  outlet. addEventListener () IOErrorEvent. ( IO_ERROR, onError ();

  }

  This locates the connection (allows us to see what has happened or failed)

  function onConnect () evt:Event():void

  {

  trace ("Connected"();

  outlet. removeEventListener () Event. ( CONNECT, onConnect();

  outlet. removeEventListener () IOErrorEvent. ( IO_ERROR, onError ();

  outlet. addEventListener () DataEvent. ( DATA, onDataReceived ();

  outlet. addEventListener () Event. ( NARROW, onSocketClose ();

  Stadium. addEventListener () KeyboardEvent. ( KEY_UP, keyUp ();

  }

  ( function onError() evt:IOErrorEvent():void

  {

  trace ()"Login failed"();

  outlet. removeEventListener () Event. ( CONNECT, onConnect();

  outlet. removeEventListener () IOErrorEvent. ( IO_ERROR, onError ();

  Stadium. addEventListener () MouseEvent. ( CLICK, doConnect ();

  }

  Here, the flash titles what keyboard key.

  If you press 'q', the connection ends.

  ( function keyUp() evt:KeyboardEvent():void

  {

  if (evt. ( keyCode == 81( ) / / key for q code is 81

  {

  outlet. Send ("exit");

  }

  on the other

  {

  outlet. Send (evt. keyCode );

  }

  }

  It must manage the data that we get from the server.

  ( function onDataReceived ()evt:DataEvent():void

  {

  try {

  trace ()"Server:", evt. data );

  }

  catch (e:Error) {

  trace ('error');

  }

  }

  ( function onSocketClose ()evt:Event():void

  {

  trace ()"Closed connection"();

  Stadium. removeEventListener () KeyboardEvent. ( KEY_UP, keyUp ();

  outlet. removeEventListener () Event. ( NARROW, onSocketClose ();

  outlet. removeEventListener () DataEvent. ( DATA, onDataReceived ();

  Try to connect to the Jack gives me no result (other than a "Connection failed" message when I click the .swf) or the following error message:

  Error #2044: unhandled securityError:. text = Error #2048: security sandbox violation: file:///C|/Users/Marko/Desktop/Završni/Flash%20documents/Smiley%5FTCP%5FIP%5Fv4.swf cannot load data from 127.0.0.1:9001.
  to the Smiley_TCP_IP_v4_fla::MainTimeline/doConnect()()[. Smiley_TCP_IP_v4_fla ] [MainTimeline: frame1:12]

  127.0.0.1 could be supported through your HTTP software, I'm not familiar with the tool you are using. It could also have been show in your hosts file (in Windows you will find here: C:\Windows\System32\drivers\etc). Check to see if something is the substitution of 127.0.0.1 (local loop).

  Apart from that, I've given you source to a rapid AIR server that has just opened a listener to 127.0.0.1:8910 so you would need no other tools to test the client, even if you have a. I just include the source and a product AIR installer so you can reproduce them to see that I do anything malicious. The Server.air file must be "installed" to test it. When you double-click it, it is a Setup. He moved to C:\Program Files (x 86) \Server (should have called something less common in hindsight). It also has a checkbox to run it after installation. If you don't you will see the server pop up a standard window of 550 x 400 with a text inside the box there letting you know that it is listening. Everything connects, messages (channels) and disconnects the will displayed in the Server text box.

  The customer is the only SWF file, you must run, after 'something' listening on the IP address and port configure you with.

  Here is a picture to show you the server is not running in the same folder the SWF did, tell the server and it only run the client exactly how I should it look like all together:

  

  I'll show you that after running the Server.air Installer, here is the the path of the executable file is running from and the client SWF isn't here. No problem connecting despite being in different places.

  The server is running and says that it is listening on 8910. Feel free to modify the source and reproduce for a different IP/port.

  -J' open the Client.FLA and just run. It creates a new socket, add headphones, connects to 127.0.0.1:8910.

  -The server responds that he sees and accepts the client connection. The server sends a message "connected." (10 bytes) to the customer immediately.

  -The client receives data (String), he draws. The customer sniffs for this specific message, and then sends the server a string "thanks for the connection!

  -The server receives and is coded only to echo the string in the "Echo - thank you to connect!" back to check that the chain is correct.

  -The customer receives the echo of servers (30 bytes), he draws.

• Establish a persistent connection between client and server

  My application must keep in touch with my servers, the HTTPConnection gives the ablitity to make one request per connection. Then the HttpConnection might not make persistent connections in the BB. I think I can use Socket connections. I am wonding if some body can confirm that and give some sugustions how persistent connections between clients and servers.

  Thank you RexDoug and Marchywka. Your suggestions are appreciated.

• Bluetooth connection between iPhone and iPad

  My iPhone 6 does not connect to my iPad via bluetooth.

  I previously used the bluetooth connection between my iphone and iPad to connect the iPad to the internet. Despite the two devices were among the recognized bluetooth devices and they were previously linked/partner, it was not possible to establish a connection.

  Perform the actions recommended for repair/reissue apple support - 1. Toggle bluetooth, 2. turn on/off the unit, 3. remove the iPhone/iPad bluetooth connections - 4. Reset network settings - 5. Reset all the settings-, nothing works.

  IPhone/iPad devices isn't even on the list of bluetooth devices available on the iPhone, or iPad. Everything that happens is the animated icon turns all the time.

  Deleting a connection to a device and bluetooth speaker/amp from the pairing of the speaker/amp system process made a new connection.

  iPhone 6:

  Model: MG4F2QN/A

  SN: C31NLG8KG5MR

  Version: 9.2 (13 c 75)

  iPad:

  Model: ME898LL/A

  SN: DLXM42LHFK13

  Version: 9.2 (13 c 75)

  Please give instructions for the previous maintenance work bluetooth connection between iPhone and iPad.

  Thanks in advance

  To use the Hotspot feature (that you described for the connection), you must use the instructions below.

  Share your Internet connection with Personal Hotspot - Apple Support

• I have a SBS 2011 and cannot connect to internet through VERIZON FIOS.

  I have a SBS 2011 and cannot connect to internet through VERIZON FIOS. The SBS is unable to detect the IP address and gave an error message. I never get to a screen that allows me to type in the "IP address of the router" or "IP address". Verizon told me that their router address is "192.168.1.1". After a new trial, I added my NETGEAR FS105 switch between the FIOS router and my PC 2 and SBS. Result - conflict of addresses of servers.
  Any suggestions or solutions to this problem?

  Thank you
  Chuck

  Hi Chuck

  Your question is addressed in the Microsoft Answers forums.

  Please ask your question in the following forum.

  Small Business Server Forum:

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

  Concerning

• The connection between your cable modem, router or access point, and Internet are broken.

  What is the average message "the connection between your cable modum, router or access point, and internet are broken" and how to fix it?  We use internet provider time warner.  Can I access online using mini jetpack, but not through time warner.  Is the problem with our internet service or hardware problem?

  Hello Terri,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem may occur because of damaged or incorrect network settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooting and check.
  Reference:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Note: You can run utilities times 'Internet connection' and 'network card'.

  If this does not help, use method 2.

  Method 2:
  Reset TCP/IP and check the issue.
  Refer to this article:
  How to reset TCP/IP using the NetShell utility
  https://support.Microsoft.com/en-us/KB/299357

  I hope this information helps.

  Please let us know if you need more help.

  Thank you