eStn C510 printer wireless problem.

Similar Questions

• Printing - Windows 7 and HP printer wireless problem

  I'm having a problem with wireless printing on... I am running Windows 7 Home Premium, on a a new HP laptop and an hp officejet pro 8500 wireless device.  As another user on this forum... it will work if I plug in the usb cable, but it is not an acceptable solution for me.  I have two other computers on my wireless network... a mac and an office (both on different operating systems) that are printing the printer wireless without a problem.  It will remain not connected my laptop (Windows 7).  What seems to happen, is that I lose my connection to the network.  This is not moved until I started trying to print wireless.  But now that I am printing wireless I can print a job or two, and then I lose my connection.  If I run upstairs and power to the bottom of my router, I'll be able to print again... briefly... and then I lose my wireless connection and I start over again.  I uninstalled and reinstalled.  I installed the correct drivers (and I am able to print... but I'll have to restart my router every 30 minutes approximately).  If I'm not looking to print wireless from my laptop (with windows 7) I don't have this problem... I lose no connection between my laptop and the wireless network unless I'm wireless printing.  Other computers on the wireless network will continue to work very well, but I have to restart my router in order to get reactivated the ability to print.  Print a couple of jobs and then * poof * I can't print more.     My router is a Belkin N + B1F688.  My printer is connected wireless to my router and is recognized and used by two other computers.  I spent COUNTLESS hours trying to solve this problem.  I have lived my configuration of the firewall.  WHAT SHOULD I DO?

  You can post on this forum of HP printer help...

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/BD-p/networking

  MS - MVP Windows Desktop Experience
  "When all else fails try what the captain suggested before you started...". »

• LaserJet P1102w: Router reboot printer wireless problem cures - why?

  Ive had this printer (P1102w LaserJet) for a year now. Sometimes its been very well, other times as recently happened constantly offline. Its driving me crazy.

  I just read online that can help to restart the router and the last two times, my printer went offline, restart the router has healed (power cycling of the printer, by running a utility that stops & starts the spooler - did any of these things).

  So my question is - why reboot the router to fix this? Both times I was surfing online with this same router, and I have not noticed any problem with this router. And secondly, is there a setting that I can change into my router so that it will not goof the printer wireless?

  
  HP LaserJet p1102w

  OK, I'm about ideas.  I suggest check the firmware, there is a version 20150114 which was released end of March 2015 available here.

  It can also help to go through all the steps described in the paper here.

  If none of these solves the problem I will ask one of the HP support officers rush in this thread, they may have some additional suggestions.

• Since USB to printer wireless problem. Help!

  My computer is a windows xp from 2002.  Recently, I spent a WiFi modem with connection wi - fi and got everything hooked up okay, except for the HP printer will not print from the computer now.  I can only use the printer manually now.  It shows that it is connected wireless now, but I get an error when I try to print anything the computer off "work has not print due to an error in the printery system".  I ran the wizard wireless to the printer, but still nothing.  I'm not very good at that kind of stuff.  I need someone who knows what to do, cause I sure can't seem to solve this problem.

  You need to "install" your printer as a wireless printer.  The icon is now displayed in the printers and faxes is connected by USB installation.  After the wireless installation is finished, you can either leave the premiera or delete it.

  For your printer user's Guide should be on the CD supplied with the printer. It may have been copied to your computer when you did the initial installation.  If you don't, go here--> http://h10032.www1.hp.com/ctg/Manual/c01856408.pdf

  The User Guide of your Motorola cable modem (which includes a wireless router) is here--> http://tinyurl.com/bayh7wt

  I'm not sure from your description, but I think that you run the "Wireless Setup Wizard" using the controls on the front panel of the printer, as described on pages 62 and 63 of the printer User Guide.  Assuming that's what you were doing, you seem to have stopped before moving on to step 6... which is actually an entirely additional process which is described on page 66 of the use and copied below Guide.  When you perform this procedure, your computer must be connected to the cable modem, or with an Ethernet cable or its own wireless connection.

  To install the HP Photosmart of Windows software on a networked computer

  1. Quit all applications that are running on your computer.
  2. Insert the installation CD provided with the product in the CD-ROM drive on your
  computer and follow the instructions on the screen.
  NOTE: If the HP Photosmart camera is not connected to a network, run it wireless
  Setup Wizard in the network menu on the HP Photosmart camera. If during software
  installation, the software cannot find the product over the network or you were
  Unable to run the Wireless Setup Wizard, you will be prompted to
  temporarily to connect the unit to the computer via the USB setup cable
  install the HP Photosmart camera on your network. Do not connect the USB installation cable
  to the computer so that you are prompted.
  3. If an on the Firewall dialog box appears, follow the instructions. If you see a popup of firewall
  messages, you must always accept or allow the pop-up messages.
  4. on the connection Type screen, select an appropriate option, and then click Next.
  The search screen is displayed as Setup search the product on
  the network.
  5. in the printer screen detected, make sure the printer description is correct.
  If more than one printer is on the network, the printers found screen.
  Select the product that you want to connect.
  6. follow the prompts to install the software.
  When you have finished installing the software, the product is ready for use.
  7. to test your network connection, go to your computer and print a self-test report
  the product.

• OfficeJet 6500 E710n-z - printing wireless problems

  I recently bought a HP OfficeJet 6500 has to work in wireless mode.  I had problems to configure the device.  I have yet to set up the fax, but the scan works, but I can't print from my computer.  I run MS VISTA and I rebooted rebooted several times HP software etc. (printing software not only the remaining 6 software - no option to uninstall for the latter).  The printer can see my wireless router and printer on the PC Kit I can check the cartridge ink levels.  However, I can't print the PC (OK the printer) test pages.  I downloaded various tools on the HP site and got the following message - "missing software!  HP software required to connect to your printer on the network was not found on this computer etc."so it seems to be a matter of communication protocol between the PC and the printer

  I seem to be going round in circles here for any help/advice anyone can offer would be appreciated.

  Thank you in anticipation

  Thank you very much PrintDoc. There are some update on the 6500 has wifi problem;

  1 - to the level of security WPA2 - personal TKIP or AES. The printer can connect to the network, I can ping (192.168.1.104), but I can't print anything. Called HP customer service, then,.

  2 - start > devices and printer > add a printer > add a local printer (don't choose not low a bluetotth wireless,...) > create a new port > standard TCP/IP port > write your IP of the printer and uncheck the query the printer... > Officejet 6500 in the right box and click Hawlett-Packard (not HP) > NEXT (do NOT click on have a disk or something else) > replace the current driver > next > next > do not share this printer > finish

  3 HP support team has informed me that some routers have a problem with this printer. I have a Linksys WAG320N

  I hope this helps some of you...

  ZG

• Printer wireless problem

  Wireless printer worked still today unable to print.  Says I'm not connected.  When I check the wireless button on the printer, it says I'M connected.  I disconnected the router, the printer and restarted everything.  Always says I'm offline.  Help!

  Hello Ray,

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. What is the brand and model of the printer?
  2. have you made any hardware or software changes to your computer recently?

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the printer Troubleshooter and check.
  Reference:
  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  If this does not help, then use method 2.

  Method 2:
  Please follow these steps and check the issue.

  a. click the Start button, and then click "devices and printers".

  b. Select the printer, right-click on it and select "printer properties".

  c. Select the ports tab.

  d. Select "configure port".

  e. uncheck "SNMP status enabled" and click ok.

  Then, if the problem persists, use method 3.

  Method 3:
  Try to Remove and reinstall the printer. Please follow these steps:

  a. click the Start button, and then click "devices and printers".

  b. right-click on the network printer, and then select 'delete the printer '.

  You can now reinstall the printer driver after downloading from the website of the manufacturer of the printer.

  Additional information:
  Network printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems
  (Also applies to Windows 7)

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Interact S605 Lexmark printer wireless problem

  I recently purchased a Lexmark Interact S605 of walmart wireless printer, com  I have a HP PC with a great OS using Windows 7 pro, first with Internet Explorer 10 and now with IE 11 and tons of memory, (1 to).  This printer worked great for about 6 months and I could even, (using the wireless option), to print from another PC in the House, (one connected to the router) and the other a netbook wireless.  All of a sudden he stopped just works!  I uninstalled and reinstalled several times using the disk that came with it, or with the disc using the Internet connection and the Printer Wizard!  The printer still works like it will print once and then it will not print another article! The copy option also works fine so I know that the printer is still able to function properly!  I tried to use the most updated driver online and still when I turn it on it prints my first selection and that's all, nothing else will print! A few times if I stopped with a work always in that printer it randomly will show that the next day or later tonight, for example, while I'm checking e-mails!  This thing is haunted!  She really sucks as I finally broke down and bought a decent printer after using the printer of HP basic cheapest I could find and then this happens a month or two after that the warranty is!  I'd appreciate really no help from anyone who may have performed in it or something like that!  I even tried to connect as an ordinary printer with a wired connection and wireless with the same results!  Help!  Thank you! bogart1959

  Hi Thomas,

  I imagine the inconvenience that you are experiencing.

  I suggest you follow the steps in the article provided by the manufacturer of the printer to solve this problem.

  Incompatible print or impression of failure with Microsoft Windows 7 (32 and 64 bit) operating systems

  http://support.Lexmark.com/index?ModifiedDate=12%2F19%2F13&page=content&ACTP=LIST_RECENT&ID=SO7483&locale=en&UserLocale=en_US

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• C7280 all in the a photosmart printer wireless problem

  Photosmart c7280 All in One

  Windows 7 64 b

  Unable to connect to the modem

  no change

  This photosmart c7280 all-in-one is no spring chicken, and there were no problems so far. It is connected to 2 laptops via a Qwest wireless modem. After that be able to connect to the printer for a week or two the ability to access the printer has disappeared... printer shows offline. To resolve this problem, I had to redo the SSID and WEP information and it would be upward. Today when this 'fix' again once he could not find the modem even if I am connected to my office at the top of the page and online. I had unplugged the modem and brought up in power go online without a problem, I so I stop the 7280 and restarted, is returned to Setup Wizard wireless, put in the news and hit OK... it has started the search for the modem then hooked! Unable to do anything, power button did not work, had to pull the plug to get it to turn off. Back on and everything but the wireless worked, did this x 4 with the same result. Is there a separate card to control the wireless function? It is replaceable and it sounds like the likely cause of the problem?

  Thank you, Bob

  Looks like the wireless card has failed.  Print a network Test Wireless in the network menu on the front of the printer.

  If she does not, reset the printer by turning it off, keeping the # 6 keys while a few seconds after turning it on.

  If the radio is toast, it can be practically replaced.

• have problems printing wirelessly on my C510 estn. I get an error message that says: I'm paper when I did the paper

  off message on my c510 estn paper

  I have problems printing wireless to my C510 estn. I get an error message that says: I'm paper when I did the paper

  Hello

  1. what operating system is installed on the computer?

  2. were there any changes (hardware or software) to the computer before the show?

  Perform the steps in the article mentioned below and check if the problem occurs.

  http://bizsupport1.Austin.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=4073314&prodTypeId=18972&ObjectID=c02248120

  Hope this information helps.

• Printing Hp3650 wireless problem

  I have a macbook pro retina (1 year) and printer hp3650 that wasn't printing wireless via wifi mobile orange no problem. I've changed since mobile vodafone wifi and cant work how to change the printer to recognize the vodafone wifi. (Prints ok with usb). Any help would be greatly received

  Hi SharonCracknell,

  I'm sorry to hear you're having problems connecting your Deskjet 3650 printer to your new network wireless from Vodafone.

  I've included a link to the HP wireless printing Center.  Under Section A, "your printer was working on the network before and now is not" there is a sub-section titled ' was nothing changed or recently updated updated on your wireless router?'.  There is in the subsection detailed steps to follow when you changed your wireless router.

  Wireless Printing HP Center - Troubleshooting

  http://www.HP.com/global/UK/en/wireless/troubleshooting.html

• Photosmart B110: Problem with B110: order print wirelessly (once again!  :-()

  Hi all

  A few weeks ago, I've been here for more help (see: http://h30434.www3.hp.com/t5/Printer-Software-and-Drivers/B110-doesn-t-print-wireless-anymore-after-... )

  Then, after you apply the advice of sabretooth04 (manually in the WAP code on the LCD of the printer, it worked perfectly... until :-(a few days ago)

  Although nothing has changed: no new software, no change of position... nothing!

  Then I restarted the router, then the printer and the laptop; Once again put in the WAP code... but it does not help :-(

  The printer is doing well: all the test pages out big, like the wireless network test page.

  Please, I really need help (again)

  Greetings from the Netherlands,

  Sigrid

  P.S., as wireless worked from day one, I never used the cable and now I can not find. So for the moment I have no alternative wireless...

  Hello

  Thank you for using the forum.  You can try the following:

  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PDU

  Hope that helps.

• I get an error message when I want to print from my laptop on my Lexmart printer wireless. It is said "problems connecting to the printer.

  original title: devmgmt msc

  I get an error message when I want to print from my laptop on my Lexmart printer wireless. It says "connection to the printer problems" sometimes he just complained and then prints, sometimes it won't print at all. I hate the thing!

  Hello

  I suggest you to see link below and check if it helps.

  http://www.Lexmark.fr/publications/pdfs/810/winug/Eng/UGnetwk.html

  I suggest also you see the steps from the article below and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

• problem installing printer wireless HP 4620

  Hello - I don't have many computer skills and hope someone can give some advice for a rookie, to solve this problem.

  I just bought a wireless hp printer 4620 and cannot get it set up to exploit the wireless. I can make it work with a usb cable on my main computer, which runs using Ubuntu 12.04 and it works perfectly then. However, I want to create a home network with two other computers, and I need to be able to connect and use the wireless printer. I had the imression that the hp printer may automatically connect to a wireless router out of the box.

  I have a router Linksys Wireless and N150 of D-link wireless USB adapter for my computer. I followed all the instructions wireless hp manual. The wireless feature is enabled in the printers menu, but it tells me that there is no connection. When the D-Link wireless card is connected to my computer, I get online ok, so the wireless connection running fine on my computer, but the printer does not print-it is said that it is not connected. I plug the usb cable into my computer and print it immediately. I want to create a home network with 3 computers and thought that this printer wireless would allow me to do. So I need to fix this so that I can achieve. Can anyone offer any solution please? Thanks in advance. Best regards, Tony Brown

  On the printer in the network or wireless settings, it gives you an IP address from the printer? Connect the printer to your network with the correct network key?

• Printing with Hp laserjet P1102w wireless problems

  Hi, I have problems printing wireless on my macbook with Hello. I set up the printer and it prints ok. But after awhile, it loses comunitcation. I always turn off my router to reset everytime I need to print. I tried the printer of the assign a static IP address, but it still does the same thing.

  Hello

  To address the issue of Hello, probably it depands on your router, will be helpful to know your router brand and model to better understand the reason.

  To work around the problem, you can also set the printer by IP, in my view, it should help:

  1. Go into System Preferences > Print & Fax or printing & scanning.
  2. Click on the Plus sign to add a printer.
  3. Click the icon of the IP above.
  4. Select the HP Jetdirect Socket Protocol.
  5. Type the IP address of the printer.
  6. Confirm and will create a new queue.

  Print using the print queue newly created, listed as the IP address of the printer.

  Kind regards

  Shlomi

• HP Envy 4507: Problems with printing wirelessly to my iMac

  The printer worked fine without thread when implemented since January 2015. But this week (early May) I can't print wireless. The printer is on my network. I can access it from the iMac using the ip address in the browser, and it seems OK. I uninstalled the HP utility software and it - redownloaded, but when automatic running connect it does not locate the printer. Printers and fax settings I have deleted the printer and tried to readd it. It locates the printer, but it does not automatically select the driver. I manually select and click Add and I tells me that it cannot connect to the printer. When I try and add it via the IP (even tried with a static IP address) I tells me that the printer is not on my network. As I said before this week, it was fine. I tried most of the things on the forums - even at zero complete remission of the printing system on the printer restore to the factory settings and the system prefs and resettign of the printer itself. My OS is 10.10.3 and I use a BT home Hub 5.

  Hi @DrChops,

  Welcome to the HP Forums, I'd love to help you with your envy 4507. We'll leave the router and unplug the power cable (NOTE: do not reset the router.), and then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  If please remove and re-add the printer now and let me know if the feeding cycle solves the problem.