C7280 all in the a photosmart printer wireless problem

Similar Questions

• -What is the HP Officejet 7310 all in one able to print wireless

  -What is the HP Officejet 7310 all in one able to print wireless

  What operating system?  If Windows and with the printer connected to the router via Ethernet, download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

  What did he say?

• HP Photosmart C4580 Wireless problem - Snow Leopard

  Hello

  My HP Photosmart C4580 has worked for wireless (albeit a bit slowly) until I made 2 changes:

  (a) I changed my router SSID (network name) and password

  (b) I have upgraded from Leopard to Snow Leopard

  At first I tried to use the HP configuration utility to reconfigure the network my printer wireless.  It doesn't not work - he told me that my printer to be connected via USB, while he was already.  I tried different things and ended up reset wireless to the printer (using the printer menu).

  Then, in the HP that I read that HP utilities do not work with Snow Leopard help files.  But the instructions for wireless network with my snow leopard printer did not work.  I could install my printer via USB (and downloaded driver), but it does not appear on the list without wire.  I couldn't find a way to configure wireless with USB connection, as I already had when I initially set up my printer with Leopard.

  Video instructions to set up wireless for Mac (http://h30434.www3.hp.com/psg/board/message?board.id=Macintosh&thread.id=231) seemed promising, because it would finally give me a chance to give my printer on my network information.  Wireless Network Test report gives the network name (SSID hpsetup) (since I have reset the settings), that I found promising, although only under IP address, he said 'not applicable' (and obviously fails it test under 'Network name found' failed-it).  However, my macbook can't take any hpsetup network and on the network Page Configuration I printed the network status is 'offline', Active connection Type is None, URL is 0.0.0.0.  Apparently my printer cannot connect to this network hpsetup.

  I have spent a few days on this and I am completely at a loss to know what to do.  Can someone please advise?  Thank you very much.

  OK, we can solve the problem.

  First you uninstall the 10.5 HP software before installing 10.6?  If this isn't the case, we might as well do it now.

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt, as well as Apple and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled, this is why we do not run this thing all the time)
  Click on continue
  Let the cleaner it is.

  Then, remove the printer in System Preferences, Print & Fax.

  After that, go to hp.com and download the 10.6 complete package

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=OJ-74785-1&LC=en&DLC=en&cc=us&lang=en&OS=219&product=3418707

  Having attached to the C4580 usb cable and select Wireless when you can.  Follow the rest by.

  I noticed problems where people have "special" characters in their password wireless.  If it fails, and you have no alphabetic characters or digital, you will need to go through the process of hpsetup ad hoc, as detailed in the video you mentioned.

• Is it possible to connect the HP Photosmart C4780 Wireless printer without USB cable?

  Hello

  My family and I recently moved and while moving, something inevitably get lost or left for account.  I am fighting to get this printer and will so I don't have to bother people at the front desk at school to print my documents for me.  I have lost/misplaced both the HP Photosmart C4780 printer software disk and the USB cable.  I have no idea where these things are and have not found them within two months, we've been in the new House.

  I solved the issue of the loss of the installation disk by downloading it from the HP site.  My problem is now getting beyond the USB connection and get the currently installed software.  Because I run on a MacBook Pro, it always tells me that I need the USB key to continue the installation.  I'm on a Verizon Wireless router, and I even tried to find the printer on my wireless network with no luck.

  Help, please!

  Thank you.

  It's the type of cable you will need (ignore the color of the cable, the ends are the important part).

  

  Have a new router is not a problem, but remember the SSID and password wireless exactly, otherwise it will not work (if you decide to try Method 1). It's a bit like "trick" your printer into thinking that your new router is your old a long enough to configure the network settings for the new (desired).

• photosmart printer Wireless 4599

  I had to update my router wireless last week.  Now my printer does not work.  Although I check online and pc displays the printer such as connected, I get the message not connected wireless printer.

  Hi grandmajc,

  Method 1

  I suggest you check out the link below and run the utility on the computer network Diagnostic HP and check if the problem persists.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02114394&LC=en&DLC=en&cc=us&lang=en&product=3757826

  Method 2

  If the previous step fails, then I suggest you uninstall printer completely from the computer drivers and later reinstall, check if it helps.

  Range of all-in-one printers, HP Photosmart C4599

  http://h10025.www1.HP.com/ewfrf/wc/product?LC=en&DLC=en&cc=us&lang=en&product=3757826&

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• With the help of printer wireless HP Officejet 6500 with Windows 8.

  I have a HP Officejet 6500 wireless all-in-One printer and a laptop from Samsung with Windows 8.  How can I select print all, selection or Pages (option) when you print a document online or on my computer?

  I use a printer-E709n and thank you and all the others to try to help me with this problem, but I found the solution to my problem.  It seems that not all e-icons are not created equal.  I have internet access of the e icon on the start page of Windows 8 when I should have access through the e icon on the office page.  They take you to two different pages.  Open Web page through the e-icon of the start page has no internet tool gear symbol in the header (the symbol of charm tool gear does not bind to the printer either) and clicking on Ctrl-P does not bring to the top of the window to print even as in previous versions of Windows.  My spirit guide was able to get this information for me.

• 7520e HP photosmart all-in-one: 7520e photosmart printer, does not connect to web services

  My printer was working fine, I share wireless between your desktop 8.1 windows 64-bit, windows 7 64 bit desktop and a windows 8.1 64-bit laptop, the latter is rarely used although it remains connected.

  Now, for some reason, my printer cannot connect to web services, it says an error has occurred, but you may still be able to use some of our services.

  I can connect to e print without any problems and it is connected to my network and wireless, I managed to send faxes, but only from the top of the charger of my printer page and not my computer, but at least it works, I can do a sheet of coverage since the fax software.

  Is this one of printers who had a few apps taken away from him? If so, this may be the problem with the web services.

  I uninstalled my software to print several times and re installed as has a HP technician but still no luck.

  Any ideas please.

  It print and scan very well although I have on my desktop windows 8.1 for the moment, I still have to

  install it on my windows desktop 7. Last night, when the technology installed on my windows desktop 7, he says you correctly it installed-windows 8.1 desktop, which of course was incorrect. I am the administrator on office computers, no homegroup, or user accounts, I just choose to share.

  Hello @emma22,

  Appreciate your efforts.

  Please check the picture below:

  

  Go to printer EWS - network - wireless - IpV4

  Click the manual IP address - suggest a manual IP address.

  Select the manual DNS, then choose 8.8.8.8 and 8.8.4.4

  Save the settings.

  Let me know how it goes.

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• Help to the implementation of the ipad to print wireless

  I'm trying to set up my printer hp deskjet 3050 to print wireless from my ipad/iphone...help!

  The reason that the issue is important, the Deskjet 3050 does not support Apple Airprint.  The 3050 a supports Airprint.

  This document lists the supported Airprint printers.

  http://support.HP.com/us-en/document/c02814760

• Since USB to printer wireless problem. Help!

  My computer is a windows xp from 2002.  Recently, I spent a WiFi modem with connection wi - fi and got everything hooked up okay, except for the HP printer will not print from the computer now.  I can only use the printer manually now.  It shows that it is connected wireless now, but I get an error when I try to print anything the computer off "work has not print due to an error in the printery system".  I ran the wizard wireless to the printer, but still nothing.  I'm not very good at that kind of stuff.  I need someone who knows what to do, cause I sure can't seem to solve this problem.

  You need to "install" your printer as a wireless printer.  The icon is now displayed in the printers and faxes is connected by USB installation.  After the wireless installation is finished, you can either leave the premiera or delete it.

  For your printer user's Guide should be on the CD supplied with the printer. It may have been copied to your computer when you did the initial installation.  If you don't, go here--> http://h10032.www1.hp.com/ctg/Manual/c01856408.pdf

  The User Guide of your Motorola cable modem (which includes a wireless router) is here--> http://tinyurl.com/bayh7wt

  I'm not sure from your description, but I think that you run the "Wireless Setup Wizard" using the controls on the front panel of the printer, as described on pages 62 and 63 of the printer User Guide.  Assuming that's what you were doing, you seem to have stopped before moving on to step 6... which is actually an entirely additional process which is described on page 66 of the use and copied below Guide.  When you perform this procedure, your computer must be connected to the cable modem, or with an Ethernet cable or its own wireless connection.

  To install the HP Photosmart of Windows software on a networked computer

  1. Quit all applications that are running on your computer.
  2. Insert the installation CD provided with the product in the CD-ROM drive on your
  computer and follow the instructions on the screen.
  NOTE: If the HP Photosmart camera is not connected to a network, run it wireless
  Setup Wizard in the network menu on the HP Photosmart camera. If during software
  installation, the software cannot find the product over the network or you were
  Unable to run the Wireless Setup Wizard, you will be prompted to
  temporarily to connect the unit to the computer via the USB setup cable
  install the HP Photosmart camera on your network. Do not connect the USB installation cable
  to the computer so that you are prompted.
  3. If an on the Firewall dialog box appears, follow the instructions. If you see a popup of firewall
  messages, you must always accept or allow the pop-up messages.
  4. on the connection Type screen, select an appropriate option, and then click Next.
  The search screen is displayed as Setup search the product on
  the network.
  5. in the printer screen detected, make sure the printer description is correct.
  If more than one printer is on the network, the printers found screen.
  Select the product that you want to connect.
  6. follow the prompts to install the software.
  When you have finished installing the software, the product is ready for use.
  7. to test your network connection, go to your computer and print a self-test report
  the product.

• Interact S605 Lexmark printer wireless problem

  I recently purchased a Lexmark Interact S605 of walmart wireless printer, com  I have a HP PC with a great OS using Windows 7 pro, first with Internet Explorer 10 and now with IE 11 and tons of memory, (1 to).  This printer worked great for about 6 months and I could even, (using the wireless option), to print from another PC in the House, (one connected to the router) and the other a netbook wireless.  All of a sudden he stopped just works!  I uninstalled and reinstalled several times using the disk that came with it, or with the disc using the Internet connection and the Printer Wizard!  The printer still works like it will print once and then it will not print another article! The copy option also works fine so I know that the printer is still able to function properly!  I tried to use the most updated driver online and still when I turn it on it prints my first selection and that's all, nothing else will print! A few times if I stopped with a work always in that printer it randomly will show that the next day or later tonight, for example, while I'm checking e-mails!  This thing is haunted!  She really sucks as I finally broke down and bought a decent printer after using the printer of HP basic cheapest I could find and then this happens a month or two after that the warranty is!  I'd appreciate really no help from anyone who may have performed in it or something like that!  I even tried to connect as an ordinary printer with a wired connection and wireless with the same results!  Help!  Thank you! bogart1959

  Hi Thomas,

  I imagine the inconvenience that you are experiencing.

  I suggest you follow the steps in the article provided by the manufacturer of the printer to solve this problem.

  Incompatible print or impression of failure with Microsoft Windows 7 (32 and 64 bit) operating systems

  http://support.Lexmark.com/index?ModifiedDate=12%2F19%2F13&page=content&ACTP=LIST_RECENT&ID=SO7483&locale=en&UserLocale=en_US

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Printing - Windows 7 and HP printer wireless problem

  I'm having a problem with wireless printing on... I am running Windows 7 Home Premium, on a a new HP laptop and an hp officejet pro 8500 wireless device.  As another user on this forum... it will work if I plug in the usb cable, but it is not an acceptable solution for me.  I have two other computers on my wireless network... a mac and an office (both on different operating systems) that are printing the printer wireless without a problem.  It will remain not connected my laptop (Windows 7).  What seems to happen, is that I lose my connection to the network.  This is not moved until I started trying to print wireless.  But now that I am printing wireless I can print a job or two, and then I lose my connection.  If I run upstairs and power to the bottom of my router, I'll be able to print again... briefly... and then I lose my wireless connection and I start over again.  I uninstalled and reinstalled.  I installed the correct drivers (and I am able to print... but I'll have to restart my router every 30 minutes approximately).  If I'm not looking to print wireless from my laptop (with windows 7) I don't have this problem... I lose no connection between my laptop and the wireless network unless I'm wireless printing.  Other computers on the wireless network will continue to work very well, but I have to restart my router in order to get reactivated the ability to print.  Print a couple of jobs and then * poof * I can't print more.     My router is a Belkin N + B1F688.  My printer is connected wireless to my router and is recognized and used by two other computers.  I spent COUNTLESS hours trying to solve this problem.  I have lived my configuration of the firewall.  WHAT SHOULD I DO?

  You can post on this forum of HP printer help...

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/BD-p/networking

  MS - MVP Windows Desktop Experience
  "When all else fails try what the captain suggested before you started...". »

• LaserJet P1102w: Router reboot printer wireless problem cures - why?

  Ive had this printer (P1102w LaserJet) for a year now. Sometimes its been very well, other times as recently happened constantly offline. Its driving me crazy.

  I just read online that can help to restart the router and the last two times, my printer went offline, restart the router has healed (power cycling of the printer, by running a utility that stops & starts the spooler - did any of these things).

  So my question is - why reboot the router to fix this? Both times I was surfing online with this same router, and I have not noticed any problem with this router. And secondly, is there a setting that I can change into my router so that it will not goof the printer wireless?

  
  HP LaserJet p1102w

  OK, I'm about ideas.  I suggest check the firmware, there is a version 20150114 which was released end of March 2015 available here.

  It can also help to go through all the steps described in the paper here.

  If none of these solves the problem I will ask one of the HP support officers rush in this thread, they may have some additional suggestions.

• Photosmart C4795 wireless problem

  Hi, I tried to configure connect wirelessly with my mac (OS 10.5.8) but I can't seem to access it.  When I search the online ip address I can pull up all the information from the printer, but when you try to add the preferences--> printers/fax system there is no recognized printers available.  When trying to set up by the disk, that I am unable to connect wirelessly via usb - all I get is an error saying that my mac has no access on the network even if it does.  The printer wireless network test report, there is no problem found.

  I can add the printer directly by the option ip address when adding new printers through the system preferences, but the only thing that printed successfully is through the hp utility test page - whenever I try to print other documents it stalls and loses the connection to the printer.  I don't know if I added it by intellectual property through system pref properly because of this.  Everything works fine from my pc.  Thanks for any help you can provide.

  If it prints very well from your PC, then I will assume that it is connected to your network OK.  We'll take on the Mac:

  First thing to try would be to reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  If she is not there, restart your router and look again.

  Also, tell me about your network - router brand/model, type of encryption (WEP, WPA, etc.) and ISP type (DSL, cable, etc.).

• Photosmart C4580 wireless problems after installing Snow Leopard

  Hello

  I recently installed the new Snow Leopard on my macbook to see I have printer problems.  I tried to uninstall the HP printer and reinstall.  I can print if I connect with my USB, but I can't make it work wireless.  When I try to print wireless, printing opens and tries to print.  Then I get an error message saying that my printer is offline.  How can I make 'online '.  This error message disappears when I plug in the USB cable.

  I would really like my printer works as well as it did before Snow Leopard.  Maybe that's not possible, but I would at least the option of wireless printing.  I've been waiting with the help of HP for 20 min. twice and finally abandoned.  Any help anyone could give me would be greatly appreciated.

  Thank you very much.

  LSteph

  Isteph: The main reason for you trouble is that you send the job thanks to a USB print queue configured. Each queue on a Mac is specific to a single connection method. Printer offline is the Mac error, which means the cable is not connected (of course it wouldn't be).

  To fix this: open your menu Apple - system preferences - Print & Fax. Use the 'negative' at the bottom of the column to remove from the queue for this device. Click on the "plus" sign to search a new queue. You want to add a queue of bonjour for wireless connections. If a queue of Hello is not displayed then PrintDocs instructions above may help you to re-associate the printer to the network.

• Photosmart C6300 all-in-one. Not printing wireless!

  I use C6383 on Mac OS for years, it worked perfectly well with different routers.

  About a week ago I changed a router and now I have huge problems of wireless printing.

  Once I sent a file to print, it says "Looking for printer...» Connecting to the printer... Print page 1, 0% complete... "And after a while, I see the message"unable to connect to the printer. Start over in 30 seconds".

  I have connected the printer and computer to the new network, I've updated the software (downloaded from hp.ru). I also uninstalled the software and installed it again. I did everything written to support. In vain.

  Have no idea what to do, u using begging

  Mac OS X 10.6.

  OK, we're going up.  Print a network Test Wireless at the front of the printer.  The printer is connected to your network?  You can tell by looking at the IP address.  If not 0.0.0.0 or 169.254.x.x is connected to (a) network.

  Your computer has the same structure (the first three sets of numbers) IP address?  What I mean is make sure that your printer and computer are on the same network.