Printing - Windows 7 and HP printer wireless problem

Similar Questions

• Windows XP and Belkin router wireless problems with error WZC871122

  original title: error wzc871122

  I have Windows xp, it worked very well. I have a router belkin on my computer, not knowing what I was doing I tried to install a belkin wireless I do not know why but I really messed up things. He wanted to even pick up my internet with out going me and loading everytime now. It says that I have something else control my internet connection, I tried everything what he tells me to do. I need help badly this is my work computer and I am lost as what to do.

  Hello

  What is the accurate and complete error message that you receive when you try to connect to the internet?

  Perform control and restoration of the system.
  How to restore Windows XP to a previous state
  http://support.Microsoft.com/kb/306084

• Windows 7 and install/recognize the problems of printer HP LaserJet P2015 error - USB Device not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

  Title: Windows 7 and install/recognize printer HP LaserJet P2015 teething problems...

  I have a dell inspiron that was originally windows Vista and I changed to windows7.  I have a LaserJet where I work, a HP LaserJet P2015 printer and when I plug in the USB, it says (peripheral USB not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

  How and what should I do to get the printer going or to get the computer to recognize.  Installation CD will not work and I looked online and downloaded drivers but still the same thing.

  Hi LOliver,

  Method 1: Run the hardware and peripheral troubleshooting tool and check if it makes a difference.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Disconnect all USB (Universal Serial Bus) devices connected to the computer (unless your mouse and keyboard). Connect the printer and check to see if the problem persists.

  Method 3: Connect the printer to a different USB port and check.

  Method 4: Reinstall the USB (Universal Serial Bus) controllers.

   First of all, please disconnect all USB devices and then perform the following steps:

  (a) click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

  (b) in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

  (c) repeat step 2 to uninstall all items under 'USB Bus controllers'.

   

  Then, restart your computer and windows will automatically reinstall all USB controllers.

   

  HP printer drivers- ensure that you download the driver appropriate for your device model package.

   

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My computer automatically installed IE 10. I have windows 7 and there is a problem with printing

  When I try to print a Web page, I get a script error telling me that I can't print.  I have windows 7 and it works fine with IE 8.

  Hi Colleen,

  Thank you for keeping us posted.

  Please answer the question-

  What exactly happens when you use adobe?

  What is the exact error when you try to print?

  I would have you look at the article-

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help

  See also-

  http://support.Microsoft.com/kb/308260

  Applies to Internet Explorer 10.

  Note: The feature reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Back to us for any issues related to Windows in the future. We will be happy to help you.

• C7280 all in the a photosmart printer wireless problem

  Photosmart c7280 All in One

  Windows 7 64 b

  Unable to connect to the modem

  no change

  This photosmart c7280 all-in-one is no spring chicken, and there were no problems so far. It is connected to 2 laptops via a Qwest wireless modem. After that be able to connect to the printer for a week or two the ability to access the printer has disappeared... printer shows offline. To resolve this problem, I had to redo the SSID and WEP information and it would be upward. Today when this 'fix' again once he could not find the modem even if I am connected to my office at the top of the page and online. I had unplugged the modem and brought up in power go online without a problem, I so I stop the 7280 and restarted, is returned to Setup Wizard wireless, put in the news and hit OK... it has started the search for the modem then hooked! Unable to do anything, power button did not work, had to pull the plug to get it to turn off. Back on and everything but the wireless worked, did this x 4 with the same result. Is there a separate card to control the wireless function? It is replaceable and it sounds like the likely cause of the problem?

  Thank you, Bob

  Looks like the wireless card has failed.  Print a network Test Wireless in the network menu on the front of the printer.

  If she does not, reset the printer by turning it off, keeping the # 6 keys while a few seconds after turning it on.

  If the radio is toast, it can be practically replaced.

• LaserJet P1102w: Router reboot printer wireless problem cures - why?

  Ive had this printer (P1102w LaserJet) for a year now. Sometimes its been very well, other times as recently happened constantly offline. Its driving me crazy.

  I just read online that can help to restart the router and the last two times, my printer went offline, restart the router has healed (power cycling of the printer, by running a utility that stops & starts the spooler - did any of these things).

  So my question is - why reboot the router to fix this? Both times I was surfing online with this same router, and I have not noticed any problem with this router. And secondly, is there a setting that I can change into my router so that it will not goof the printer wireless?

  
  HP LaserJet p1102w

  OK, I'm about ideas.  I suggest check the firmware, there is a version 20150114 which was released end of March 2015 available here.

  It can also help to go through all the steps described in the paper here.

  If none of these solves the problem I will ask one of the HP support officers rush in this thread, they may have some additional suggestions.

• I provide an error of syntax on my laptop sony vaio windows 7 and it stops wireless connection.

  After a few minutes of being on and available Wi - Fi connection, the led goes out and the internet will disappear. The syntax error is as follows.

  Syntax: delay

  I have never seen it before. I think that it is the cause of the problem.

  The answers would be great.

  Joe

  A few things to try...

  1. Start in safe mode with network and see if the problem occurs...
  2. Perform a clean boot and see if you can identify the problem...
  3. Run the System File Checker tool and see if you have a file corrupt (s)...

• Windows 8 and Franklin U600 driver problems

  Hello

  I have a modem USB U600 at Virgin Mobile, the USB modem drivers are not compatible with Windows 8.

  When you look at Device Manager I find there something in the sense of 'Error 37, impossible to initialize the drivers'.

  Is there no workaround possible to get this thing works with Windows 8?

  I spoke to the Virgin people and believe it or not the only thing to do is to return the USB modem where we bought it (the same thing happened to me). The USB modem is not compatible with Windows 8, and nothing else can be done. I find it incredible, but there you have it... They claim they have other solutions that work with Windows 8, but it remains to be seen.

• VDDK, Windows 7 and 2008 R2 installation problem or volumes

  With the ESX update we can snapshot Windows 7 and 2008 R2 system but try to mount the volumes snapshoted with VDDK return 24305 - the specified volume is already mounted.

  Is this a known issue? We use VDDK ' VMware-vix-disklib - 1.1.1 - 207031.

  Thank you

  -Ron

  When calling for the information of the OS, it is possible that internal one or several volumes can be mounted. So a call to MountVolume can return with the return code "Volume already mounted. This should not be considered a failure. You can call to remove the volume (and close the disk) when finished.

  Thank you

  Annick

• Since USB to printer wireless problem. Help!

  My computer is a windows xp from 2002.  Recently, I spent a WiFi modem with connection wi - fi and got everything hooked up okay, except for the HP printer will not print from the computer now.  I can only use the printer manually now.  It shows that it is connected wireless now, but I get an error when I try to print anything the computer off "work has not print due to an error in the printery system".  I ran the wizard wireless to the printer, but still nothing.  I'm not very good at that kind of stuff.  I need someone who knows what to do, cause I sure can't seem to solve this problem.

  You need to "install" your printer as a wireless printer.  The icon is now displayed in the printers and faxes is connected by USB installation.  After the wireless installation is finished, you can either leave the premiera or delete it.

  For your printer user's Guide should be on the CD supplied with the printer. It may have been copied to your computer when you did the initial installation.  If you don't, go here--> http://h10032.www1.hp.com/ctg/Manual/c01856408.pdf

  The User Guide of your Motorola cable modem (which includes a wireless router) is here--> http://tinyurl.com/bayh7wt

  I'm not sure from your description, but I think that you run the "Wireless Setup Wizard" using the controls on the front panel of the printer, as described on pages 62 and 63 of the printer User Guide.  Assuming that's what you were doing, you seem to have stopped before moving on to step 6... which is actually an entirely additional process which is described on page 66 of the use and copied below Guide.  When you perform this procedure, your computer must be connected to the cable modem, or with an Ethernet cable or its own wireless connection.

  To install the HP Photosmart of Windows software on a networked computer

  1. Quit all applications that are running on your computer.
  2. Insert the installation CD provided with the product in the CD-ROM drive on your
  computer and follow the instructions on the screen.
  NOTE: If the HP Photosmart camera is not connected to a network, run it wireless
  Setup Wizard in the network menu on the HP Photosmart camera. If during software
  installation, the software cannot find the product over the network or you were
  Unable to run the Wireless Setup Wizard, you will be prompted to
  temporarily to connect the unit to the computer via the USB setup cable
  install the HP Photosmart camera on your network. Do not connect the USB installation cable
  to the computer so that you are prompted.
  3. If an on the Firewall dialog box appears, follow the instructions. If you see a popup of firewall
  messages, you must always accept or allow the pop-up messages.
  4. on the connection Type screen, select an appropriate option, and then click Next.
  The search screen is displayed as Setup search the product on
  the network.
  5. in the printer screen detected, make sure the printer description is correct.
  If more than one printer is on the network, the printers found screen.
  Select the product that you want to connect.
  6. follow the prompts to install the software.
  When you have finished installing the software, the product is ready for use.
  7. to test your network connection, go to your computer and print a self-test report
  the product.

• Printer wireless problem

  Wireless printer worked still today unable to print.  Says I'm not connected.  When I check the wireless button on the printer, it says I'M connected.  I disconnected the router, the printer and restarted everything.  Always says I'm offline.  Help!

  Hello Ray,

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. What is the brand and model of the printer?
  2. have you made any hardware or software changes to your computer recently?

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the printer Troubleshooter and check.
  Reference:
  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  If this does not help, then use method 2.

  Method 2:
  Please follow these steps and check the issue.

  a. click the Start button, and then click "devices and printers".

  b. Select the printer, right-click on it and select "printer properties".

  c. Select the ports tab.

  d. Select "configure port".

  e. uncheck "SNMP status enabled" and click ok.

  Then, if the problem persists, use method 3.

  Method 3:
  Try to Remove and reinstall the printer. Please follow these steps:

  a. click the Start button, and then click "devices and printers".

  b. right-click on the network printer, and then select 'delete the printer '.

  You can now reinstall the printer driver after downloading from the website of the manufacturer of the printer.

  Additional information:
  Network printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems
  (Also applies to Windows 7)

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Interact S605 Lexmark printer wireless problem

  I recently purchased a Lexmark Interact S605 of walmart wireless printer, com  I have a HP PC with a great OS using Windows 7 pro, first with Internet Explorer 10 and now with IE 11 and tons of memory, (1 to).  This printer worked great for about 6 months and I could even, (using the wireless option), to print from another PC in the House, (one connected to the router) and the other a netbook wireless.  All of a sudden he stopped just works!  I uninstalled and reinstalled several times using the disk that came with it, or with the disc using the Internet connection and the Printer Wizard!  The printer still works like it will print once and then it will not print another article! The copy option also works fine so I know that the printer is still able to function properly!  I tried to use the most updated driver online and still when I turn it on it prints my first selection and that's all, nothing else will print! A few times if I stopped with a work always in that printer it randomly will show that the next day or later tonight, for example, while I'm checking e-mails!  This thing is haunted!  She really sucks as I finally broke down and bought a decent printer after using the printer of HP basic cheapest I could find and then this happens a month or two after that the warranty is!  I'd appreciate really no help from anyone who may have performed in it or something like that!  I even tried to connect as an ordinary printer with a wired connection and wireless with the same results!  Help!  Thank you! bogart1959

  Hi Thomas,

  I imagine the inconvenience that you are experiencing.

  I suggest you follow the steps in the article provided by the manufacturer of the printer to solve this problem.

  Incompatible print or impression of failure with Microsoft Windows 7 (32 and 64 bit) operating systems

  http://support.Lexmark.com/index?ModifiedDate=12%2F19%2F13&page=content&ACTP=LIST_RECENT&ID=SO7483&locale=en&UserLocale=en_US

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• eStn C510 printer wireless problem.

  eStn C510a printer is not connecting wireless.  Everything else works via the tablet or USB.  Performed each diagnosis known or studied by me to reset the indicator blue wireless flashing without result.  The detachable Tablet shows that the Zeen and SSID are related as well as the IP address.  The menu, however, shows that the printer is disconnected.  I am also the force close error: "the application Reader Avenue process com.hp.ij.reader has stopped unexpectedly.  Please try again. "Help!

  Problem solved after reviewing the post on "problem with WEP.  Had changed router 9100EM Verizon Ultraline series 3 model from its default from WEP to WPA/WPA PSK 2 via FIOS.  Unfortunately I had already implemented my C510 eStn on the Verizon router before changing in the Verizon In-Home-Agent of its default WEP to WPA.  Subsequently reset my C510 value by default factory menu Zeen and Eureka!

• OfficeJet 6500 E710n-z - printing wireless problems

  I recently bought a HP OfficeJet 6500 has to work in wireless mode.  I had problems to configure the device.  I have yet to set up the fax, but the scan works, but I can't print from my computer.  I run MS VISTA and I rebooted rebooted several times HP software etc. (printing software not only the remaining 6 software - no option to uninstall for the latter).  The printer can see my wireless router and printer on the PC Kit I can check the cartridge ink levels.  However, I can't print the PC (OK the printer) test pages.  I downloaded various tools on the HP site and got the following message - "missing software!  HP software required to connect to your printer on the network was not found on this computer etc."so it seems to be a matter of communication protocol between the PC and the printer

  I seem to be going round in circles here for any help/advice anyone can offer would be appreciated.

  Thank you in anticipation

  Thank you very much PrintDoc. There are some update on the 6500 has wifi problem;

  1 - to the level of security WPA2 - personal TKIP or AES. The printer can connect to the network, I can ping (192.168.1.104), but I can't print anything. Called HP customer service, then,.

  2 - start > devices and printer > add a printer > add a local printer (don't choose not low a bluetotth wireless,...) > create a new port > standard TCP/IP port > write your IP of the printer and uncheck the query the printer... > Officejet 6500 in the right box and click Hawlett-Packard (not HP) > NEXT (do NOT click on have a disk or something else) > replace the current driver > next > next > do not share this printer > finish

  3 HP support team has informed me that some routers have a problem with this printer. I have a Linksys WAG320N

  I hope this helps some of you...

  ZG

• Last update of Windows XP and SVCHOST. EXE problems?

  Hello. My PC runs XP SP3 (HP Media Center) 3G of ram. It worked very well lately without any problem whatsoever. This morning I started as usual. I noticed the familiar Microsoft Update 'yellow shield' in the lower right of the task bar. I flew over the mouse over it and it read "download updates 0%. He never got above zero (or I couldn't open Update window). I pulled up the Manager tasks and SVCHOST. EXE has been hogging 99% of my CPU. I have everything closed and stopped and restarted. After the reboot (thinking it was a problem of Windows Update), I went on the Microsoft Windows Update site and clicked on 'Express' updates to try to update manually. He began cycling (search?) updates and soon SVCHOST. EXE, roared back to life and pegged the CPU at 99% of use (effectively maxing out the CPU at 100%). Page Update MS has never reached the point where it stated that I needed updates... He kept just cycling and research. Once the SVCHOST. EXE is happening (I tried this update 3 - 4 times today) it does not stop (if I close the window of Windows Update or not). I need to stop and restart. When I stopped, I see a prompt "end program" for RUNDLL. EXE that (when I try to 'end') translates into a prompt "unresponsive". I have to leave the program to close. As a precaution I've scanned with MSE, Malwarebytes, Spybot and SuperAntiSpyware and all were clean. No problem with MS Security Center is. I never saw my computer behaves like this before. At the time of this post, it seems fine except when I try to update on the Microsoft Site. Is there a bug or a problem with the last update?  Any thoughts appreciated. Thank you.

  Install KB2846071 for IE version 6: http://www.microsoft.com/en-us/download/details.aspx?id=39519
  Or update IE 8 version: http://www.microsoft.com/en-us/download/internet-explorer-8-details.aspx

  New info: the best way is to KB2870699.  He has the problem with high CPU.
  http://TechNet.Microsoft.com/en-us/security/bulletin/MS13-069