ESX 3.0 to 3.5 upgrade and new WITHOUT
Our courses VMware environment consists of 2 ESX 3.0.1 hosts with VMotion. They share the storage on a San. Another physical server is used for Virtual Center 2.0.1. The whole environment was not properly Setup and we want to essentially from scratch, moving to ESX 3.5 U3 as well as to move the servers to another data center and a new NO. Our current plan is as follows:
Updated current host ESX 3.5 U3 and Virtual Center 2.5.
Install ESX 3.5 U3 on another temporary host, and move all the guests to this host.
Physically move the two ESX servers to the new data center and conenct again WITHOUT.
Make a fresh installation of ESX 3.5 U3 on hosts, configure new environment, test VMotion and ensure that everything works.
Move the temporary host to the new ESX environment guests.
Y at - it no gotcha with this plan. We want to use the 30 day ESX 3.5 trial on our temporary host, because we only licenses for 2 guests and only need to this host for migration as a temporary location to permanently keep our VM customers.
Looks pretty good, though, migration will provide less downtime by comparing the upgrade on the spot. Be SURE to backup your virtual machines before. New ESX 3.5 installation would be nice, unless you want to keep the old performance data.
1. install VC 2.5 from scratch with database thus created VUM.
2. install ESX 3.5 U3 and configure all settings and networking.
3 configure the cluster HA, VMotion and DRS.
4. disconnect the ESx 3.0.2 cluster hosts and add new cluster ESX 3.5 and VMware Tools upgrade
5 perform the same procedures until everything has been on ESX 3.5 U3.
If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!
Kind regards
Stefan Nguyen
iGeek Systems Inc.
VMware, Citrix, Microsoft Consultant
Tags: VMware
Similar Questions
-
iMac 21.5 "retina - HARD drive upgrade and / or install the Fusion drive?
Hi all
I recently bought a retina-iMac 21.5 "(fin 2015 obvs), without realizing it when I did so that it came with a slow hard disk 5400 RPM that will larn me - do your research the next time Cameron!" In any case, I'm trying to sell it, but my search for a buyer continues, I also try to establish - without much success until now - if a hard drive upgrade and/or installation of a fusion player any is possible. I am aware that the RAM in this model is not extensible.
Any entry received with gratitude
Although it is possible it is a company very difficult and will void any warranty future and Apple. Have you thought from the external drive Thunderbolt?
-
To print messages in Gmail, I used to click on "Firefox" in red at the top left. I upgraded and now it's gone. I would like to print an email I received. How do I do that?
Make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Ctrl + Shift + F).
You see the orange Firefox button if the menu bar is hidden (view > toolbars).
If the menu bar is hidden, then press the F10 key or hold down the Alt key to make the call of menu bar.
Make toolbars like the toolbar 'Navigation' and the 'personal bar' are visible: "view > toolbars" or "Firefox > Options.
-
700 - 281eo envy: RAM upgrades and guaranteed
Hello!
So I have a question regarding the upgrade of my computer.
I recently had a problem when it comes to my RAM. It seems that 8 GB of RAM is not enough, that I use my computer for (mainly play games etc...), as I had many accidents because of the low amount of available ram (for example 4 Fallout, which uses almost all of it).
So my question is: if I have the RAM on my computer upgrade me a 16 GB Kit, my warranty is void? And would do no matter what kit of RAM, or I have to use strips of crucial ram?
Also on the side in question, if I decide in the future to update my graphics card to a GTX 1060 (which uses 70W less than my current 270 R9) that manages the more wins.
Thank you for reading!
Adding memory wouldn't void your warranty. "Unless you break something, do the upgrade".
You can use any memory manufacturer provided they meet your specifications.
● 204-pin DDR3-DIMM
● DDR3 PC3-10600 (1333 MHz) SDRAM memory
● Unbuffered non ECC DIMMS (64-bit)
● 1, 5V dead memory
● 16.0 GB maximum installable memory help
4 GB modules. Actual available memory that
can be used in Windows will be less.
Your upgrade and Service Manual here.
http://h10032.www1.HP.com/CTG/manual/c02871896
REO
-
I just upgraded the new 6.01 FF and I don't like the way it is prepared and want to return to the previous version. How I do that without completely uninstall FF completely? Help... Please tell me how > thank you
Well, it's not as if you're upgrading! You don't downgrade your browser.
But don't worry, the decommissioning process, it's like the upgrade. For example, you can install an older version without uninstalling Firefox!
Don't forget to hit "resolved."
IMPORTANT NOTE: Remember that previous versions may have security problems. The latest security updates, you MUST upgrade to the latest version. That's what I would recommend. Thank you!
-
Start Windows with El Capitan upgrade and now OS advantage!
Hello:
I had Windows 7 installed on bootcamp and run without a hitch. With the upgrade to El Capitan, the entire partition and Windows startup option disappeared.
I tried to correct it and could see the Windows partition with option for (by pressing Option at startup to the top), but the error I get is now that the operating system is missing.
Here are the steps that I followed to solve the initial problem:
1. This is the result of the following commands:
Cs diskutil list
sudo TPG - vv - r see the/dev/disk0
sudo fdisk/dev/disk0
--------------------------------------------------------------------------------
Cs diskutil list
CoreStorage groups of logical volumes (1 found)
|
+ Logical Volume - Group F7087A6A-CC59-4D01-8236-EEE7F2CD70BE
=========================================================
Name: Macintosh HD
Status: online
Dimensions: 430789959680 B (430.8 GB)
Free space: 18948096 B (18.9 MB)
|
+-Physical volume EE4F25E0-6F1A-4579-BFAE-43B1E8F150A1
| ----------------------------------------------------
| Index: 0
| Disc: disk0s2
| Status: online
| Dimensions: 430789959680 B (430.8 GB)
|
+--> Logical volume family 7BC7C103-E99B-4258-B349-16A6F81853C0
----------------------------------------------------------
Encryption type: no
|
+--> Logical volume DB39C2E3-FD65-40AF-AECD-C5426AFE2F73
---------------------------------------------------
Disc: disk1
Status: online
Size (Total): 430418690048 B (430.4 GB)
Reversible: Yes (no required decryption)
Name: Macintosh HD
Volume name: Macintosh HD
Content indicator: Apple_HFS
--------------------------------------------------------------------------------
sudo TPG - vv - r see the/dev/disk0
Password:
See the TPG: / dev/disk0: mediasize = 500277790720; SectorSize = 512; blocks = 977105060
See the TPG: / dev/disk0: MBR suspicious to sector 0
See the TPG: / dev/disk0: Pri GPT to sector 1
See the TPG: / dev/disk0: GPT Sec at sector 977105059
start index size summary
0 1 MBR
1 1 Pri GPT header
2 32 table GPT Pri
34 6
40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 841386640 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC
841796280 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC
843065816 16852520
859918336 117186560 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
977104896 131
977105027 32 table dry GPT
977105059 1 dry GPT header
--------------------------------------------------------------------------------
sudo fdisk/dev/disk0
Disk: geometry / dev/disk0: 60821/255/63 [977105060 sectors]
Signature: 0xAA55
From end
#: cyl hd s - cyl hd s id [Start - size]
------------------------------------------------------------------------
1: EA 1023 254 63 - 1023 254 63 [1-409639] < unknown ID >
2: AC 1023 254 63 - 1023 254 63 [409640-841386640] < unknown ID >
3: AB 1023 254 63 - 1023 254 63 Boot Darwin [841796280-1269536]
* 04:07 1023 254 63-1023 254 63 [859918336-117186560] HPFS/QNX / TO THE
--------------------------------------------------------------------------------
2 installed gdisk
--------------------------------------------------------------------------------
sudo gdisk/dev/rdisk0
GPT fdisk (gdisk) version 1.0.1
WARNING: Open with shared lock devices will not have their
table partition automatically reloaded!
Scanning partition table:
MBR: hybrid
BSD: absent
APM: absent
TPG: present
Found a valid GPT with hybrid MBR; using GPT.
Command (? for help): P
Disk/dev/rdisk0: 977105060 sectors, GiB 465.9
Logical sector size: 512 bytes
Identifier (GUID) of disc: 7F7B7C2C-D4E1-463A-A358-C48DC4D06309
Partition table contains up to 128 entries
First usable sector is 34, last usable area is 977105026
The partitions will be aligned with the boundaries of sector 8
Space free total is 16852657 sectors (8.0 GiB)
Starting number (sector) end (sector), Code name of size
409639 40 1 200.0 of MiB EF00 EFI system partition
2 409640 841796279 401.2 giB AF05 Macintosh HD
3 841796280 843065815 619.9 MiB AB00 Recovery HD
4 859918336 977104895 55.9 giB 0700 BOOTCAMP
Command (? for help):
--------------------------------------------------------------------------------
3 installed TestDisk
--------------------------------------------------------------------------------
TestDisk 7.1 - WIP, utility data recovery, February 2016
Christophe GRENIER <[email protected]>
/ Dev/rdisk0 - 500 GB of disk / 465 GiB - 977105060 sectors (RO)
The hard drive (500 GB / 465 GiB) looks too small! (< 560 GB / GiB 521)
Check the size of the hard drive: HD jumpers, BIOS detection...
The following partitions cannot be recovered:
Start end partition size in sectors
> Data 977104895 1094291454 117186560 MS
Mac HFS 977105020 978374555 1269536
[Continue]
NTFS, blocksize = 4096, 59 GB / 55 GiB
--------------------------------------------------------------------------------
2 screen after [continue]
--------------------------------------------------------------------------------
TestDisk 7.1 - WIP, utility data recovery, February 2016
Christophe GRENIER <[email protected]>
/ Dev/rdisk0 - 500 GB of disk / 465 GiB - 977105060 sectors (RO)
Start end partition size in sectors
> system EFI P 40 409639 409600 [EFI System Partition]
D Mac HFS 409640 841071143 840661504
Data SM 709029896 843067392 134037497 D
D Mac HFS 841796280 843065815 1269536
Data SM 843067392 977104888 134037497 D
Data SM 859918336 977104895 117186560 D
D Mac HFS 975835488 977105023 1269536
Structure: Ok. Use up/down arrows to select the partition.
Use the arrow keys left/right to CHANGE the characteristics of partition:
P = primary D = deleted
A: keys Add partition, L: load backup, t: change the p-type: list of files.
Enter: continue
FAT32, blocksize = 512, 209 MB / 200 MiB
--------------------------------------------------------------------------------
P (list of files on the MS Data 843067392 977104888 134037497)
--------------------------------------------------------------------------------
TestDisk 7.1 - WIP, utility data recovery, February 2016
Christophe GRENIER <[email protected]>
Data 843067392 977104888 134037497 MS
Directory /.
> dr-xr-xr-x 0 0 0 14 - Sep - 2015 14:23.
Dr-xr-xr-x 0 0 0 14 - Sep - 2015 14:23...
Dr-xr-xr-x 0 0 0 15 June 2015 07:02 $Recycle.Bin
Dr-xr-xr-x 0 0 0 9 August 2015 17:49 WINDOWS $. ~ BT
Dr-xr-xr-x 0 0 0 9 August 2015 17:49 $Windows. ~ WS
Dr-xr-xr-x 0 0 0 9 August 2015 start 19:33
Dr-xr-xr-x 0 0 0 15 June 2015 07:10 Intel
Dr-xr-xr-x 0 0 0 16 June 2015 01:44 MSOCache
Dr-xr-xr-x 0 0 0 14 July 2009 12:20 PerfLogs
Dr-xr-xr-x 0 0 0 20 July 2015 16:50 Program Files
Dr-xr-xr-x 0 0 0 9 August 2015 16:23 Program Files (x 86)
Dr-xr-xr-x 0 0 0 16 June 2015 01:45 ProgramData
Dr-xr-xr-x 0 0 0 15 June 2015 07:02 recovery
Dr-xr-xr-x 0 0 0 1 - Sep - 2015 22:29 System Volume Information
Dr-xr-xr-x 0 0 0 15 June 2015 07:08 users
Dr-xr-xr-x 0 0 0 12 August 2015 15:02 Windows
-r - r - r - 0 0 8192 15 June 2015 14:50 BOOTSECT. BAK
-r - r - r - 0 0 2056 15 June 2015 07:10 RHDSetup.log
-r - r - r - 0 0 383786 November 20, 2010 21:40 bootmgr
-r - r - r - 0 0 12812939264 14-Sep-2015 21:20 hiberfil.sys
-r - r - r - 0 0 17083920384 14-Sep-2015 21:20 pagefile.sys
Next
Use the change directory, h to hide the Alternate Data Stream
q to quit,: to select the course file, a to select all files
C to copy the selected files, c to copy the current file
--------------------------------------------------------------------------------
What are the measures taken subsequently.
A NEW TERMINAL WINDOW.
--------------------------------------------------------------------------------
sudo gdisk/dev/rdisk0
Password:
GPT fdisk (gdisk) version 1.0.1
WARNING: Open with shared lock devices will not have their
table partition automatically reloaded!
Scanning partition table:
MBR: hybrid
BSD: absent
APM: absent
TPG: present
Found a valid GPT with hybrid MBR; using GPT.
Command (? for help): P
Disk/dev/rdisk0: 977105060 sectors, GiB 465.9
Logical sector size: 512 bytes
Identifier (GUID) of disc: 7F7B7C2C-D4E1-463A-A358-C48DC4D06309
Partition table contains up to 128 entries
First usable sector is 34, last usable area is 977105026
The partitions will be aligned with the boundaries of sector 8
Space free total is 16852657 sectors (8.0 GiB)
Starting number (sector) end (sector), Code name of size
409639 40 1 200.0 of MiB EF00 EFI system partition
2 409640 841796279 401.2 giB AF05 Macintosh HD
3 841796280 843065815 619.9 MiB AB00 Recovery HD
4 859918336 977104895 55.9 giB 0700 BOOTCAMP
Command (? for help): D
Partition number (1-4): 4
Command (? for help): N
Partition number (default 128-4, 4): 4
Everything first in the sector (34-977105026, default = 843065816) or {+ -} {KMGTP} size: 843067392
Last sector (843067392-977105026, default = 977105026) or {+ -} {KMGTP} size: + 134037497
The current type is ' Apple HFS / HFS +'
HEX code or GUID (L to view codes, entry = AF00): 0700
Changed type of partition to "Microsoft Basic data."
Command (? for help): q
sudo gdisk/dev/rdisk0
Password:
GPT fdisk (gdisk) version 1.0.1
WARNING: Open with shared lock devices will not have their
table partition automatically reloaded!
Scanning partition table:
MBR: hybrid
BSD: absent
APM: absent
TPG: present
Found a valid GPT with hybrid MBR; using GPT.
Command (? for help): R
Recovery/processing command (? for help): O
Size of the disk is 977105060 sectors (465.9 GiB)
MBR disk identifier: 0x3F3EA8FD
MBR partitions:
Code of State sector Boot start end sector number
1 1 409639 primary 0xEE
2 409640 841796279 primary 0xAC
3 841796280 843065815 primary 0xAB
4 * 859918336 977104895 0 x 07 elementary school
Recovery/processing command (? for help): H
CAVEAT! Hybrid MBRs are flaky and dangerous! If you decide to not use one,
Simply press enter at the prompt below and your partition table MBR will be
be intact.
Type one to three GPT partition numbers, separated by spaces, to be
added to the hybrid MBR, in order: 2 3 4
Partition of EFI GPT (0xEE) place first in the MBR (good for GRUB)? (Y/N): Y
Create entry for the #2 GPT partition (partition MBR #2)
Enter a hex code MBR (default AF):
Set the bootable flag? (Y/N): N
Create entry for the #3 GPT partition (partition MBR #3)
Enter a hex code MBR (default AB):
Set the bootable flag? (Y/N): N
Create entry for the #4 GPT partition (partition MBR #4)
Enter a hex code MBR (default 07):
Set the bootable flag? (Y/N): Y
After that, I had the option of Windows start show on the charger of bootcamp, but no operating system (Windows) is available. Any help with this would be welcome. Thanks in advance.
O.T.
-
The site
https://Fourwinds.com/OCF/login.php
only works with Firefox as browser. The webmaster does not have upgraded and debugging for use with Firefox 4. I'm hoping to find a copy of the version 3.0 - ish to be able to access this web site. Any suggestions?
You can get Firefox 3.6 http://www.mozilla.com/en-US/firefox/all-older.html
If it's just for a site, an alternative is to keep Firefox 4 but install the portable version of the earlier version of Firefox on your hard drive. You can get http://portableapps.com/apps/internet/firefox_portable - section version inherited at the bottom of this page contains links to older versions of Firefox.
-
Envy 15 t-j000: upgrade of 15 t-j000 to win 10 and new SSD at the same time
Hello
My cell phone is 8 GB, 1 TB with the 24Go running Windows 8.1 MSSD.
I want to upgrade to 10 windows, but do not want to 'upgrade' this particular configuration. What I would do is update my 16 GB ram and my HD to a 1 TB SSD.
(1) upgrade to 16 GB means that I can't use the WSSD of 24 GB than anything more correct? I guess if I upgrade the essential motivation for one SSD I more need for MSSD. Or is - that's a good idea to upgrade the WSSD to 32 GB then the swap file on a drive "distinct"? (is this obsolete technology, old school board?)
(2) is there a way to download Windows 10 and burn on a DVD or USB installation and then install "fresh" of without first upgrading my mechanical drive Windows 8.1? The reason is, I'm a student, I can't have my laptop down for awhile so I can't afford a 1/100 chance I'm going to kill my laptop and Miss assignments. I think if I start the upgrade and have problems, I can put the old drive, remove the extra memory and get until I can afford more downtime.
Anyway, any help on this is appreciated. My computer works very well for being a 2 years, so if I can't do it a bit without pain, I'll go ahead and leave it as what. Thanks for any idea you may have.
The clean install with Windows 10 will require that buy you it and the upgrade is free, updates and I did probably 15 to 20 of them, went virtually flawless for me. If you clone, just do a "sizing" of leave and small differences will be accrued.
-
I have a HP ENVY 750-177c and has been upgraded and 2 thin black wires were disconnected from the motherboard. They have loops at the end of the wires that look like they might slip on the pins. The wires connect to the upper part of the box of the computer. Where to reconnect?
Find this card in your system. It is the M2 half-bridge Wireless card. The other end of the wires must always be fixed. There are 2 heels left and right of the '2 '. If everything is correct, it is your physical WI - FI antenna. Just re - stick inside the case. The small clips are used for an external aerial connection.
PS<> > have a good day...
-
Corrupt upgrades and their blocking effects
I recently had someone treats a number of improvements uninstalled for me which some were corrupt. It seems that I'm now the same problem again. How can I identify which updates are corrupted / blocking installation of other upgrades and how to change upgrades corrupted those not corrupt?
I went to the last part of my story update here but can't eat it.
Hi yesprimeminister,
1. What is the error message that you receive when installing updates on the computer?
2. did you of recent changes on the computer?
Try the following steps only if you are referring to the Windows updates
In order to solve the updates to install, we will have to check the update history for the details of the failure
View update history to know which update is not installing.
(a) open Windows Update by clicking Start , all programsand then click Windows Update.
(b) in the left pane, click view update history.
(c) to view more information about an update, double-click it.
Once you know the update's KB number then visit the Microsoft Download and put the number in the search box, download and install the update manually.
http://www.Microsoft.com/downloads/en/default.aspx
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I reformatted my Dell 2.4 ghz pc (only 512 MB of ram) to the original state of xp. It was incredibly FAST. But to run programs, I was forced to upgrade to service pack 2. Service this pack 3. It is slower than molasses in January in Chicago. Microsoft has an XP consolidated and updated that includes all the security updates and new features in 1 integrated fast program?
Spin Norton - bought after that it came with the machine.
Ah! Norton applications are notorious for not not upgrade (or uninstalling) itself. This gives a whirlwind:
1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe
2. close all open applications (that is, anything with an icon on the taskbar).
3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) via Add/Remove Programs.
4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.
NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!
5. double-click on the file that you saved in #1 above to run the utility. DO TAP not your keyboard until the race ends, then restart.
6. do a clean install of your Norton application, using your product ID & reboot: http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN
TIP: Do not activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.
7. manually and repeatedly run LiveUpdate until you get a prompt "no update more".
8 test cycle.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Can I upgrade to vista without deleting my xp programs and files?
upgrade
Can I upgrade to vista without deleting my xp programs and files? I don't want to lose my programs/files downloaded, but I don't want to argue with remove them and reinstall later
Yes, you can perform an upgrade "On the spot" and all your personal data and software applications will be available in Vista (provided that they are compatible Vista).
As always, you should create a backup Image in XP before you begin the upgrade, just in case. Also check that you still have your XP product key. If this isn't the case, then use one of the below product key finders.
Also: http://windows.microsoft.com/en-US/windows-vista/Upgrading-from-Windows-XP-to-Windows-Vista
-The key finder software product-
Here are some utilities, which will display your product keys:
Belarc Advisor: http://www.belarc.com/free_download.html
(He did a good job of providing a wealth of information.)Also: http://www.magicaljellybean.com/keyfinder.shtml
and: http://www.nirsoft.net/utils/product_cd_key_viewer.htmlNote: Also check the side of your PC case or at the bottom of the laptop for the
Key OEM code. If there is a sticker with the code, it will probably not
corresponds to what is displayed by the utilities mentioned above as OEM such as
Dell use an internal key code when they build your PC.The key on the sticker code should be used with your Windows CD
(who came if everything goes well with your PC) If you need to reinstall Windows.--------------------------------- Image Backup Software ---------------------------------------------
Acronis True Image 2011 - has a fully functional trial version of 30 days available.
(Note: install Acronis and then create a bootable media restoration/rescue CD before you start creating your first image backup)
http://www.Acronis.com/homecomputing/products/TrueImage/
The version comparison: http://www.acronis.com/homecomputing/products/trueimage/comparison.html
True Image User Guides and documentation:
http://www.Acronis.com/homecomputing/download/docs/Free alternative:
EASEUS Todo Backup home V2
(Note: Todo Install, then create a diskette "emergency" before you start creating your first image backup)
http://www.TODO-backup.com/J W Stuart: http://www.pagestart.com
-
CANNOT UPGRADE AND CAN NOT UNINSTAAL
COULD NOT UPGRADE AND WAS NOT ABLE TO COMPLETE UNINSTALL SYSTEM CRASHED AND NOW WHEN I TRY TO UNINSTALL IMPOSSIBLE MSSE FOND. MSI FILE
Hi oschmerber,
· What you're trying to upgrade or uninstall?
· How you are trying to upgrade?
You can check this link that might be useful for you.
Uninstall, update msse.msi does not
Please provide us with more information about the issue so that we can provide you with the necessary assistance.
Concerning
Joel S
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Original title: I have an an OEM vista upgrade and the pc will not take my product code. It is said that it will expire in 2 days. Thanks, Mike
I have an an OEM vista upgrade and the pc will not take my product code. It is said that it will expire in 2 days. Thanks, Mike
Hi Mike,
Thanks for posting your question in the Microsoft Community.
I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:
1. What is the error message that is accurate or complete?
2. have you made any recent hardware or exchange of software on your computer before the show?I suggest you to go through the following articles and check if that helps.
Error message when you start Windows Vista: "your activation period has expired".
http://support.Microsoft.com/kb/925616Resolve activation problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-activation-problemsHow to activate Windows Vista
http://support.Microsoft.com/kb/940315How to contact a Microsoft Product Activation Center by phone
http://support.Microsoft.com/kb/950929For more information:
Validation failed? These scenarios may help to explain why.
http://www.Microsoft.com/genuine/downloads/FailureScenarios.aspx?displaylang=enIf anything in my post is not clear or if you have other questions, do not hesitate to let us know. It is our pleasure to be of service.
-
Original title: error upgrading and installation of iTunes 10.5 for Windows 6.
I tried all kinds of ways to solve this problem, but I can't seem to find a solution. This all started when I tried to update my iTunes to version 10.5. Then came the error message 7 on unidentified signature etc. I could not even run my iTunes more then. I started download iTunes again to repair and it just doesn't work. I don't have problems with the installation of my iTunes for the first time a year ago and upgraded whenever I allow it.
All other methods I tried to correct the error includes:- Uninstall iTunes completely and everything that it supports the programs and files (Quicktime, supporter of Mobile, Hello, Safari etc.)
- Download Quicktime separately after you have uninstalled it as suggested by other users in some forum.
- Update the frame Microsot.NET as suggested by the Apple Support site.
Manually started the installation of such Windows program suggested by one of the answers on this site:
a. click the Start button, and then type services.msc in the start search box and press ENTER.
b. Locate the Windows Installer service.
c. check that the status is started. If the condition column is empty,
d. right-click on Windows Installer, and then select start.
e. If you get error trying to force start the Windows Installer service, then try to change the Startup Type to automatic.
f. restart the computer.I have tried for at least 10 times and I have not yet set and am frustrated. Would be really grateful a solution to this soon.
Windows Version: Windows Vista Home Premium - Version 6.0 (build 6002: Servie Pack 2).
Thank you.
Hi Junetyl,
What is the complete error message you get?
Method 1:
You can see the article next to the Apple support and check if it helps.
Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
You can also consult the following article:
iTunes for Windows: "Error 7" message when you open iTunes
You can also try the following steps and check.
Method 2:
You can run scanning of the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.
For more information, you can consult the following link.
Method 3:
You can also perform a clean boot and check if you can install iTunes.
A clean boot to check if startup item or services to third-party application is causing this issue.
You can read the following article to put the computer in a clean boot:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.
You can also get in touch with Apple using Arthur support.
Hope this information is useful.
Maybe you are looking for
-
My iMac can't see SD cards as before gradually. Disk utility cannot see the SD cards. All of my SD cards are good. They can be read by other computers.
-
The show all function downloads shows no download even when there is current downloads
29 Firefox on Mac OS X 10.9. The browser icon shows a bar indicating the download in progress. The download on the toolbar button, when I select the all downloads displays a tab that says no download. I can see is more details about the files that ar
-
HP mini 110 computer: verification of password failure fatal system error stopped 2MC9391TF4
Please help get the password
-
Qosmio F30-112 drivers for linux
Hello I need help. I have a Qosmio F30 - 112 and I have linux on my pc. I need drivers for the graphics card. Thank you
-
Satellite A100 - hard drive upgrade
Hi all I want to improve my Satellite A100-847 with disk bigger and harder. I chose hitachi "travelstar", like the original, but running on 7200 RPM. My question is can I use SATA II 3 Gb/s model, or should I choose SATA I 1.5 Gb/s as the original. b