ESX 4.1 on work/pick-up station supported for 64-bit guests
First off I started on the path to my VCP. I never really knew that all that VMWARE could make up to a little forced in the equation to learn and master as soon as possible. Very impressed by what I've seen so far. Workstation is a fabulous tool and ESX is visible as a very powerful.
Sorry if this is the bad forum\has was discussed.
I built environments at home using the workstation 7. With the help of Intel i7 930, 12 GB ram, windows 7 64 bit, VT turned on in the bios.
I built an ESX Server in workstation. I SSH'd in my ESX Server and downloaded an ISO file of Windows 2008 R2 64-bit edition. I can show in the properties of the cd and to boot from the ISO image of my data store. When I power on the virtual machine, I get an error saying that VT technology must be activated... continue without support 64-bit.
Can I run 64-bit servers in a virtualized (huh?) virtual environment (ESX4 loaded into my computer, then created in ESX virtual machine)
It is not that big of a deal if I don't want to form an understanding as to why this is not possible. Thank you all
Only 32-bit clients can be installed to run as virtual machines nested within an ESX host. These virtual machines can only be configured to use binary translation.
VMware Workstation 7.0 Release notes
Tags: VMware
Similar Questions
-
I have a Sony vaio laptop, model # VPCEA36FA, I know the HOME STATION support for this model
Hello
Targus USB 2.0 Docking Station model # ACP51USZ is compatible for the computers of the series E I have provided general information.
For more information about how to contact a Sony centre in another country, please visit the following site:
https://www.Sony-Asia.com/section/contactus
If my post answered your question, please mark it as an "accepted Solution".
-
Here's what I have...Computer laptop operating system: Windows 7 x 64Laptop CPU: Intel i7 Q720, BIOS enabled for Intel-VTVM Workstation Version 7I installed successfully 4.1 ESX and ESXi 4.1 operating system as a guest in VMware Workstation 7 and they work perfectly well.Note: I installed the ESX Server after adding the monitor_control.restrict_backdoor = "TRUE" in the VMX file and change the driver of virtualization of Intel VT - x in the parameter vmworkstation to the customer.But after installing the ESX or ESXi when I'm checking the CPU, it tells me that it does support virtualization. I run this command on the ESX host, which returns a value of zero, I suppose to support CPU must return the value 3, any help would be really appreciated.~ # esxcfg-info | grep "HV Support"|----HV Support............................................ 0The HV Support command output indicates the type of support available Hyper-visiere. These are descriptions for the possible values:
0 - VT/AMD-V indicates that s support is not available for this material.
1 - VT/AMD-V in shows that VT or AMD - V may be available but it is not supported for this material.
2 - VT/AMD-V indicates that the VT or AMD-V is available but is not currently enabled in the BIOS.
3 - VT/AMD-V indicates that VT or AMD - V turned on in the BIOS and can be used.The capacity of physical hardware vitualization is not passed to the guest.
-
64-bit guest with ESX 4.0 operating system installation is not possible
Hello guys,.
I just installed two servers blade full-height M710 Dell with ESX 4.0.
They definetely support 64-bit, otherwise I think that ESX 4.0 could not run on that host.
Well, the installation worked fine, they are also connected to our vCenter charges upgraded to 4.
I tried to install the virtual first with W2K8 R2 64 bit guest OS machine. But offers installing only the x 86 install wizard.
VT (Virtualization Technology) is enabled in the BIOS.
What wrong with my configuration or missing?
Thanks for any response.
Best regards
Timo
Try to select just 2008 R1 64-bit, not R2, it should work very well.
---
If you have found any of my reviews useful please consider giving points to 'Correct' or 'useful '. Thank you!!!
-
Hello world
How can buy you an IBook of UK not available in Indian store a store; When you change the status of your country, your billing information and credit cards won't work; is there a solution for this using the same method of billing
There is no solution, if it is not available in your area, you can't buy it.
-
Photos... on the view menu, the option "Show sidebar" is not highlighted, nor the keyboard command works. Photos pretty useless for me without the sidebar.
What version of the operating system and Photos you have - whether you use pictures you don't have OS x 10.9.4 as you say
Maybe this thread will be hep - they found that drag the larger window solved the problem - Re: Option to display the sidebar photos on Mac is grayed out.
LN
-
I worked on a large document for several years and all of a sudden I can't scroll to the bottom of the screen with my two fingers on the touchpad, well that I have no problem scrolling to the bottom of this page to search for similar issues. I can navigate only to go up and down with the arrow keys.
What version of Pages is running on your MBP?
What version of Mac OS X is running on your MBP?
The MBP is not iOS running.
-
My iPhone 6 works fine except a feature. When I use speech recognition to enter text or compose an email, the hourglass turns for a bit, but nothing fills the field. On the contrary, when I use the same function on my Google app, it works great. No idea why it's happening or how to fix it?
Hello PWBMN,
Thank you for using communities of Apple Support.
I see that speech recognition in the Messages does not work correctly. To start, I suggest that you force the Messages app to quit smoking and then follow the directions below.
After each step, see if you still need help:
- Make sure that your iOS device has an Internet connection via Wi - Fi or cellular data.
- On your iOS device, make sure that Siri is enabled under settings > general > Siri.
- Restart your iPad, iPhone or iPod touch.
- On your iOS device, go to settings > general > Siri and turn off Siri. Then turn on again.
- Ensure that the microphones on your device are not blocked. For example, if your device has a protection case, remove it.
- If you use an iOS device, try to use Siri with headphones. If the works of Siri, get more help with the microphones on your device.
- Contact Apple support.
Use Siri on your iPhone, iPad or iPod touch
Take care.
-
Original title: windows media player 11 trouble conversion playlists to Excel after obtaining bonus pack.
I downloaded the bonus pack, everything works well except the library management wizard. Comes with the message that it only works with Windows Media Player for XP only. I am currently running windows xp edition family and windows media player 11. Help, please.
Hello
You can follow this link & check if the problem persists:
How to export a playlist in Windows Media Player?
Hope the helps of information.
Please post back and we do know. -
System hangs when you work on Foxprox 2.6 for DOS
hanging system
I work in foxprox 2.6 for dos. My foxprox program hangs when system os on snare for one or two seconds how can solve this problem. the system is active and only the program hangs.
Hi Maury,
Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited on the MSDN forums. Please ask your question in the following forum.
-
Client to make VoIP calls
I recently started having problems, make VoIP calls from my computer. I use VoIP Busters (and using it for a few years without any problems). Evertime I try to call the destination phone rings a couple of times and then stop. The next thing that happens is an error message that says: "Client for VoIP calls has stopped working. Windows is checking for a solution to the problem. It is followed by another screen that says: "a problem caused blocking the program working properly." Windows will close the program and inform you is a solution available. " Nothing happens. How to overcome this problem.
I finally had to resort to the re-installation of Windows. This solves the problem. But don't forget to back up your computer and email address / addresses before you do.
-
Skype has stopped working and windows is looking for a solution.
original title: problem with Skype
I have been using Skype on my laptop for 12 months with no problems, all of a sudden, I get a message that Skype has stopped working and windows is looking for a solution. I checked my firewall, windows updates and downloaded Direct X, as suggested by Skype. I've uninstalled Skype and downloaded again to make sure that the version lasted. IHAVE had also my whole system recharged but it did not work. I am at a loss to know what to do next. Someone at - it ideas
Hello
It is a possibility that a third-party application is causing the conflict with Skype. We can perform the clean boot troubleshooting and check which program is causing the conflict.See the article below for instructions on how to start your computer in a clean boot state.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
I hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
My printer is Dell v515w Red
Currently, I can only test pages print. When I try to print from any other application, I get this error-
Host of the print driver for 32 bit applications has stopped working
Signature of the problem:
Problem event name: APPCRASH
Application name: splwow64.exe
Application version: 6.1.7600.16385
Application timestamp: 4a5bd3ca
Fault Module name: ntdll.dll
Fault Module Version: 6.1.7600.16559
Timestamp of Module error: 4ba9b802
Exception code: c0000710
Exception offset: 000000000006e3f9
OS version: 6.1.7600.2.0.0.768.3
Locale ID: 1033
Additional information 1: 3edf
More information 2: 3edf0feac74021b377b392a0115d74c0
Additional information 3: bf41
Additional information 4: bf41409fee27240aa0d3cd0ee9bc9fa9
I've updated through microsoft and dell and some solutions.
What is a dell problem or a problem of microsoft?
My features are-
Studio Dell XPS 1645, Win7 64 bit, IE8
extacy1375,
Unplug the printer.
Uninstall the printer.
Restart your computer. Make sure that the printer is deleted. Driver Manual printer removal
Download 64-bit Vista drivers and save them on your desktop. Install the drivers for Vista 64 bit in compatibility mode.
Links to the 64 bit Vista drivers are to...
Wireless printer Dell V515w All In One Printer - owners (RED) wire
Rick
-
MS Streets & Maps works in Windows 7 Home Premium 64-bit.
It cannot get MS Streets & Maps works on Windows 7 Home Premium 64 bit.
See the title.
Hello Gemard,
Streets and trips 2008, 2009 and 2010 are compatible with Windows 7. Earlier versions may not work, however you can try and use Compatibility Mode.
If the program is not compatible, then you try to install and run the program in compatibility mode.
Use the following steps:
(1) right click on the program
2) click Properties
3) click on the Compatibility tab
(4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.
Check out the link here: make sure to run older programs in this version of Windows
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
If compatibility is not successful, then try and run the program compatibility problems:
1. open the troubleshooting program compatibility Troubleshooter by clicking the Start button.
Then click on Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under programs, click on run programs for previous versions of Windows.
2. follow the instructions in the troubleshooting.
If you are unable to install a program, insert the installation disc for the program and, using the Troubleshoot utility, navigate to the program setup file, usually called Setup.exe, Install.exe, or something similar. This utility is not designed to work on programs that have an .msi file name extension.
If it is not a success, since you're under Windows 7 Home Premium, you can search for 3rd party software of vitualization that works on Home Premium and run Streets and Trips in a virtual environment.
If please reply back and let us know if it helped to answer your questions.
Sincerely,
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Original title: games
When I start my X Microsoft Flight Simulator (Deluxe Edition), it is running propely for some time (15 to 20 minutes) that it no longer works and gives me a message "Microsoft Flight Simulator has stopped working. Windows is looking for a solution to the problem"and he have me to close the program. (I have Windows 7)
Help, please. :)I just "uninstalled" pack of the accelerator, and it worked fine.
Maybe you are looking for
-
Connected with the fake apple on iCloud ID
On iTunes and AppStore I connected my correct apple ID but in icloud I don't know how some different apple id is connected, and I do not know the password of it. Im not able to disconnect from icloud, because it requires the password. so, help me to
-
When I use either the scroll down bar on the right side or the up/down arrows of the screen on the screen wrong at an angle as it moves upwards or downwards. does not reset the time
-
MacBook Pro 2015 EI 10.11.4
Sometimes, when you use a Macbook pro, the system will be blocked suddenly. Then I need to manually restart the macbook or it no longer works. And another question I have activated the FileVault feature, after system reboot on the logon screen, I can
-
By mail to Outlook conversation configuration
e a Macbook 2015 with Retina display. I use an Exchange account in the Mail from Mac application. When sending mail to an Outlook on a PC, it reconfigures the email icon at the top of the email. It will not be on the page, the enamel in standard conv
-
Question to the users who have TPT2 model 367927U, MUCHO IMPORTANT
Hello I just ordered this model for 645 USD of B & H and I must be sure that this model has the ability to digitizer. For someone who already owns this modelnumber tablet, can confirm you, that it is able digitizer and work ok? / Jan