ESX disconnected and cannot connect ESX

Similar Questions

• IPad2 disabled and cannot connect to iTunes to restore

  IPad2 disabled and cannot connect to iTunes to restore

  What happens exactly?  What can't exactly?

  Are you sure that you have iTunes 12.4.1 (current version)?

• A Wi - Fi connection does not have an IP address and cannot connect to Internet

  Here's my question:

  "Wi - Fi doesn't have an IP address and cannot connect to Internet"

  But he connects.  I use the model of airport Time Capsule ME182LL/A and the last OS.

  The reason why I suspect the problem is that my Samsung smart TV will not connect to internet, but connects to the WiFi.

  Do I have a problem when the network preferences indicates my network with a point orange and says 'No IP Address'?  It doesn't have a green dot next to the Wi - Fi connection and it says connected.  I'm puzzled.

  Thanks for any idea that you can provide.

  Something wrong with the Setup program.

  After the airport utility screenshots of the configuration of TC.

  In particular this modem do you have? Actual spending brand and model please.

  Who is your ISP?

• Just bought a Macbook Pro of 2012-era and cannot connect with my Apple ID. Thoughts?

  I recently bought a Macbook 2012 used Pro and cannot connect to iCloud, App Store, iTunes with my Apple ID on the computer. I can not connect with my ID on my iPad and iPhone and Apple's site, however. I am running the latest version of El Capitan.

  What gives?

  Is this computer associated with your Apple ID?

• I have a SBS 2011 and cannot connect to internet through VERIZON FIOS.

  I have a SBS 2011 and cannot connect to internet through VERIZON FIOS. The SBS is unable to detect the IP address and gave an error message. I never get to a screen that allows me to type in the "IP address of the router" or "IP address". Verizon told me that their router address is "192.168.1.1". After a new trial, I added my NETGEAR FS105 switch between the FIOS router and my PC 2 and SBS. Result - conflict of addresses of servers.
  Any suggestions or solutions to this problem?

  Thank you
  Chuck

  Hi Chuck

  Your question is addressed in the Microsoft Answers forums.

  Please ask your question in the following forum.

  Small Business Server Forum:

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

  Concerning

• By mistake I disabled all user accounts and cannot connect to my dell latitude d610 laptop computer. Tried going into the bios and turning off everything, what does not work!

  By mistake I disabled all my user accounts and cannot connect to my laptop, the Dell Latitude d610. I tried to restart in all modes as well as rotating directors passwords and disable in the bios. Nothing works!

  Hi kathleenvickers,

  1. How you have disabled all the user accounts on the computer?
  2. What do you find in the login screen when you restart the computer?

  See the articles below and check if it helps.

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  http://support.Microsoft.com/kb/321305

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/kb/189126

• I forgot my ID Windows Live ID and cannot connect to manage my website. Anyone know how to recover a forgotten or get a new one that will allow me to access my site?

  I forgot my ID Windows Live ID and cannot connect to manage my website. Does anyone know how to recover a forgotten or the steps I must take to get a new one that won't let me access my site?

  Post Windows Live questions in the appropriate forum found here:
  http://windowslivehelp.com/

• Windows 8.1 and cannot connect to the internet even though I have full WiFi access.

  Original title: Windows 8.1 and cannot connect to internet even though I have full WiFi access-problem occurred just after working fine for over a year

  Uses Windows 8.1 for over a year with no access to the internet.  Today, I can access is no longer the internet using Explorer, Mozilla Fire Fox or store apps.  (Tried to install a game just to test the internet connection-no luck).  When I try to connect the computer just sits there with the indicator connection just spin but never passes through.  I have good indicated WiFi (Internet) access.  While they inspected the updates, the only thing that appears on the current date is some Microsoft Silverlight is.  Could that that may cause my problem?  I didn't do any changes and have no problem until today.  I'm not always well informed in this area and I am at a total loss as to how to proceed, what to check... hope someone can advise me.   Thank you, DebbieG211

  Hi Debbie,.

  You might face this problem because of wrong settings in Internet Explorer. You mentioned that you get the update of windows Microsoft Silverlight, so we can deduce that there is a problem with the Internet browser. Please write us with the following details.

  (1) do you get error messages when all websites fail to load?

  (2) what is the brand and model of your computer?

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-8

  You can also follow the steps in the link below for further troubleshooting. It is a tutorial to solve the problem of wireless and wired connections.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let us know the details asked and the status of the issue.

• Why all my files disconnect and re connect is no longer?

  Why all my files disconnect and re connect is no longer?

  @

  Hi Meg, thanks for your response. The files were imported from an SD card reader and I worked with them for weeks.

  As of this writing Adobe has reconnected the files automatically, YES! I think what happened was that I unplugged a disc, which was totally unrelated with

  in the project, but it was not properly disconnected. So I guess that Mac did not like this gesture...

• Satellite M30-107 - guard wireless disconnect and never connects

  My Toshiba Satellite M30-107 with Intel (r) PRO/Wireless 2200BG Network connection is not connect wirelessly. I know that there is no hardware problem, because I used this laptop to different wireless networks in the past, and just recently I formatted my laptop using the recovery disk Toshiba gave with it.

  I set up the wireless entering the SSID and network key. But the wireless connects with the Excellent signal is only for a second and then disconnects, then reconnects, disconnects. After doing this for a while, it remains offline.

  How can I do to connect and stay connected as it should?

  It is not easy to say why all this happens. I also think that your laptop works well, then maybe you should check the router. Reboot the router and check the WLAN connection again.

  For a moment turn off WLAN protection and check if the same problem happens without entering the network key.
  Setting router to run on 802. 11 b / g only and check again.

  Play with these settings. Have you bought a new router? I mean if everything was OK in the past I m wondering why you are facing this problem now.

• The blackBerry Smartphones No. MMS option and cannot connect to the application server

  Good evening

  For some reason any I can not receive or send MMS on my Blackberry 9520 Storm 2. I still do not see the ability to send a picture as a text when I go on my photos. I don't know if it's the phone or my provider. I have my 9520 unlocked on AT & T with a package data unlimited talk and text unlimited. I tried to have photos I was sent as well, but it was also no chance that I NEVER received a text.

  The second problem I have is that I can't access the Blackberry App Store. Try whenever I have it says that it cannot connect to the server.

  Any help?

  Edit: The problem of the App Store is no longer present (off the network and turned it back), but the MMS problem is still present.

  Hello!

  I suggest the following:

  (1) registry HRT

  • Homescreen > Options > Advanced Options > host Routing Table > BBKey (it matter little what line is current) > sign up now

  (2) Service reference books

  • KB02830 Send the directories for the BlackBerry Internet Service

  (3) restart to take batt

  • Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  I hope that will move things again for you! But, the fact that you can't do SMS or MMS seems to indicate that they are not part of your plan service provider - that is why, if the above does not help, then contact them to see if you who are on your plan on their part.

  Good luck and let us know!

• How to reset the State of package variables in all sessions connected (without requiring a disconnection and a connect) if they are reset in one of connected sessions.

  
  Hi people,
  Need help, the example requires that the value of packet data 'g_var' must be updated in the session/s connected everywhere without the session/s to be disconnected and reconnected.
  Here's the scenario:

  I created a table my_table having the pair name / value.
  A variable with global package "g_var' in his body and a get accessor method to access g_var variable from the outside world.
  This variable g_var is initialized within the block of the entry into force of the package and retrieves the current value of the variable from my_table.
  When I update the value in the table a trigger on my_table would reset the State of the package and therefore g_var to the most recent value in the same session
  All is well so far since the change in value is reflected in the current session, but if I've already connected session/s
  and I'm trying to retrieve the value of "g_var", it is not updated in already connected sessions and remains the same before the update.
  Can U help please how can I update this value in a session/s connected without having to disconnect and reconnect.
  because if I disconnect and reconect the existing sessions, it seems to show the updated value.

  Thanks in advance.

  Kind regards
  Gaurav Rajput

  Here are the Scripts:

  
  drop table my_table;
  create table my_table
  (
  my_variable_name varchar2 (100),
  number of my_variable_value
  );

  create or replace package my_package as
  Function get_g_var return number;
  end my_package;
  /

  create or replace package body my_package as
  number of g_var;
  
  Function get_g_var return number is
  Start
  Return g_var;
  exception
  while others then
  lift;
  end get_g_var;
  
  procedure init (my_passed_name varchar2) is
  Start
  Select my_variable_value in the g_var from my_table where my_variable_name = my_passed_name;
  exception
  while others then
  raise_application_error (-20004, "I got an error during Init");
  end init;

  Start
  init ('$'); -This is a call to time when the package is loaded into the memory of session
  exception
  while others then
  raise_application_error (-20003, 'Error in my_package');
  end my_pACkage;

  /
  create or replace TRIGGER my_trigger
  BEFORE DELETE OR UPDATE
  ON my_table
  FOR EACH LINE
  declare
  number of my_ret;
  Start
  DBMS_SESSION.modify_package_state (DBMS_SESSION. RESET);
  exception
  while others then
  lift;
  end my_trigger;

  /

  -It is initially set to null
  insert into my_table values ('DOLLAR', 62);
  commit;

  -test value for first time to package loading (62 views)
  Select * from my_table;

  Set serveroutput on

  declare
  my_variable varchar2 (100);
  BEGIN
  my_variable: = my_package.get_g_var;
  dbms_output.put_line ($my_var);
  END;

  -run the same block of end to start in another session it shows 62. All is well so far
  -check if the value after the update in the same session (shows 38), also check in another before the connected session as well (shows 62 and not 38)
  Update my_table set my_variable_value = 38 where my_variable_name = "DOLLAR";
  commit;

  Select * from my_table;

  Set serveroutput on

  -It displays 38 in this session, but there in an already connected session 62 and only after you log out shows 38
  declare
  my_variable varchar2 (100);
  BEGIN
  -my_variable: = my_package.g_var;
  my_variable: = my_package.get_g_var;
  dbms_output.put_line ($my_var);
  END;

  Package variables are stored in the private memory (PGA). The value is not visible in the session. A package variable is therefore not approach appropriate to your problem. You can look at in the context of the Application, as Solomon has said.

  http://docs.Oracle.com/CD/B28359_01/network.111/B28531/app_context.htm#CIHFJHCG

• F12 button orange light is on and cannot connect to internet

  Hello

  My son has a laptop HP Pavilion g6 which operates Windows 8.1

  Everything works fine up until yesterday, when the orange light on the f12 key came and laptop does not connect to the internet.  We cannot turn this light off.

  Any help would be grateful

  Thank you!

  Hello

  You have a few options in my opinion please try these steps can help you solve your problem.

  (1) disconnect the battery & adapter then press on & press and hold the power button for laptop for 30 seconds then switch on and check if the wireless led lights.

  (2) go to Device Manager then uninstall the drivers wireless network card and restart the device and check if the light is on.

  (3) Please update the Bios & Wireless driver from the HP website.

  (4) click on start search type Recovery Manager and then click on it once select Yes on user access control, and then select I need immediate help and then select driver and select request recovery driver wireless and install it and then restart the device.

  (5) If you are comfortable with reinstalling the wireless card that will be on the rear panel of your device you can try this steps as well.

  If you still have the same issue then you need to call HP tech support and get the replaced part.

• I can get some future Web sites and others do not. When I try to connect to any site, I get this message and cannot connect

  The secure connection failed

  An error occurred during a connection to mail.yahoo.com. The peer certificate has an invalid signature. (Error code: sec_error_bad_signature)

     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
     Please contact the website owners to inform them of this problem.
  

  The most common reason for the 'sec_error_bad_signature' many sites seems to be the shield of Web of Avast. Web Shield intercepts your navigation and filter, but to filter sites secure, it has "fake" certificates for Firefox. Avast have set Firefox to rely on its false certificates, but which seems to fail on a regular basis.

  To test this theory, try disabling scanning of encrypted sites. I saw these steps in another post:

  1. Open the Avast dashboard on an affected system.
  2. Select settings in the left side menu.
  3. Adopt a Protection Active.
  4. Click on customize next to the Web Shield.
  5. Uncheck the option "Enable HTTPS analysis", and then click ok

  If that solves the problem, but you want to filter encrypted communication, you need to import the Avast! signature in Firefox Certificate Manager of certificates, References tab.

• Administrator account has been disabled and cannot connect at ALL.

  I own a 'HP G71-340US Notebook running Windows 7"and I'm trying to restore my computer completely (for delete). Then at some point when I turned on the computer a few days ago, it took me in the Recovery Manager, I couldn't do anything. I try to restore the computer like new and said, it will reboot several times. I let him, then I see an error saying that it cannot restore. I click Ctrl, Alt, Del and was able to connect outside of that. Then after that he showed what to connect to. I click on administrator (because I'm the administrator of this computer) and it says disabled account, see your system administrator. Then I click on another user, he gave me the opportunity to put a username and password, but it keep saying that the username and password is incorrect. So I turned the computer off, waited 10 seconds, then he tries to put in place like new, it took about 20 seconds and then a different error comes up saying, 'Windows cannot install, please restart to install. I did so many times that I think I messed up my computer. I can't even contact HP to the computer in the Recovery Manager, and I can't go to Safe Mode.

  Due: I got more than 458 Trojans, rootkits 2 and 0 viruses on my computer (as it is said when I scan the computer until errors have shown).

  And please do not ask about Trojan horses, I don't know how that happened on my computer.

  NEW PROBLEM: I turn on my computer this morning, it says «Set up as new computer...» "then he takes me to the screen host then within 20 seconds, he said that" windows cannot install and the computer must restart. " "I let it restart about 3 times and still nothing. I try to get into Safe Mode, but it won't load at all.

  The error of hard disk 1 is a failure code for the short test on the hard drive. This means that the hard drive is faulty or failed and must be replaced. Which may have been the reason that failed to install originally.