ESX rescue mode?

Similar Questions

• BitDefender hacked me with its "Rescue Mode" on my computer - other.

  Hejsa Allesammen! En lille hilsen fra Danmark!

  -nu og til mit problem:

  I can't go in the computer - (the one I use every day...) - thanks to "Bitdefender" and it is "Rescue Mode"... I can't start. I tried all the F - F1 to F12. Nothing happens.

  I would like to know, what ISO I should use?

  I downloaded it on this PC and sent to a USB port, (- and I forgot it was still in the PC, then it began to show a lot of text, and then I saw his name.) I quickly turned off the power: Phoenix-Award BIOS v6.00PG - I think it is called.

  Can I use that one?

  And now... Well... I have absolutely no idea what to do and where to click and then, when all this text comes on the screen. I would be very grateful. If there is a manual that I could read! I would like to learn about it, myself, but I could call an expert.

  I have to use an ISO, right? Or?

  I discovered myself! I just pressed the "DEL" key and entered in the BIOS and then within 10 seconds, the good old Windows snub! BIOS has been fairly easy to understand. Never in my life I've been such a place before!

• LM 4.0, Service VM and ESX Maintenance Mode

  I'm trying to put one of my hosts LM 4.0 in maintenance mode, it hangs there because of the virtual of Service machine.  Y at - there a trick to getting the crowd to enter maintenance mode without trying to stop the virtual machine in the console?

  This is the correct behavior even though I agree that it's awkward. You can disable the host extending on that host and the VM service will get cancelled. Then, re-enable host extending on when you are finished with the maintenance mode.

  To disable the host covering, access resources, hosts, then go to the properties of host page and uncheck the "Enable host host Spanning.

• mount the partition root to esx 4.1 in rescue livecd mode

  Hi guys! I have problem with recovery of esx 4.1 upd 3 Server. To my shame, I deleted /lib64/libc-2.5.so--> link lib64/libc.so.6, then restarted a server. So now, esx makes a core dump and does not start (Kernel panic not syncing kill init). I thought it was a piece of cake to boot from livecd linux, mount the partition root of esx and recreate the link but it was not as simple as that. In rescue of the livecd mode (redhat 5), I can only mount/boot partition for esx. Command fdisk-l shows a single device (/ dev/sda1) with linux fs and other devices sdaX with extended and uknown fs types and mount error on these devices. Mount/dev/sda1 gives me a partition/boot of esx. On another host esx 4.1 with a similar configuration command df shows partition/Boot resides on the device/dev/sdd1 while other partitions as root/var/log are located on/dev/sdeX devices. After having investigated further, I found that/dev/sdd is a local protected by car while/dev/sde does not match any network SAN or raid connected locally to the readers. Tomorrow I will try to boot from the esx installation media and see if there is something simillar to rescue mode and try and do something here. I have no idea what to do if it won't help. In the hope to hear a good advise to you guys!

  Do a new installation on a disk SAN and after booting from it, I was able to solve the problem with the link. Old server is running. But after all I agree with you markdjones82 - it would be faster and easier to reinstall from scratch.

• How can I work around - printing with backup printing mode and paper drying... WAY too slow draws

  How can I work around 'backup mode printing' and 'drying page '. ?   Printing is MUCH too slow

  Yes the gray photo cartridge missing

  Hi @carp04

  To work around "printing in rescue mode" ensure that all cartridges are installed and no are exhausted.

  With respect to the drying of the page, change the print settings might help; Definitions of setting for the printer driver.

• ESX boot after power failure problems

  All, morning

  I think that this may be a simple problem to solve, but for the moment I do not know how. We had power cut which lasted longer as backup ups, where the two ESX servers has dropped recently. One came back without problem however it is not. When its turned on it gets to the boot menu, and when the normal startup mode is selected it panic the kernel with a disk error (device missing or similar - can confirm if need be).

  However, if I reboot it and select the debug mode in the start menu it starts very well, starts as usual and will run from VM. This leads me to believe that disks, files, and the BONES are fine and the problem in the config, could be damaged as a result of the unclean shutdown? I did some looking around and read a post on the repair of the boot sequence using the command: esxcfg-boot - r - could not however quantify if this was relevant in my situation or not.

  Any advice greatly appreciated.

  Check UUID in /boot/grub/grub.conf:

  (1) boot VMware ESX Server UUID (root=UUID=c087c715-534d-471e-a023-!@#$%*) is similar with your server VMware ESX (debug mode).

  (2) VMware ESX Server (root=UUID=c087c715-534d-471e-a023-!@#$%*) returns with "/" inside the / etc/fstab

  p/s: while you find how u hav thought about to reinstall your esx that can be done in a few minutes.

  vcbMC - 1.0.6 Beta

  Lite vcbMC - 1.0.7

  http://www.no-x.org

• What is the difference between standby and off mode?

  We would like to know what is the Stand of an ESX 4.0 host?

  Is there a difference whether it is in Stand By mode or he was arrested?  I guess the only difference is that an ESX host mode ensure can be started upward with VIC while the judgment cannot?

  Thank you

  Roughly, when the host is in standby mode, it is always in a power off State but you can power it on via WOL (Wake on LAN). The mainly usage case with this feature is integration with VMware DRS and VMware DPM (Distributed Power Management) which allows the cluster hosts to stop that are not actively used to save on power, once it detects a higher load, it will emit power up to guests who are in standby mode after the load.

  Here is an article shows you how to configure DPM to your hosts: http://itknowledgeexchange.techtarget.com/virtualization-pro/configuring-distributed-power-management/

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  If you find this information useful, please give points to "correct" or "useful".

• Removed password and group file/etc - please help!

  Hello

  It is a good.

  In an attempt to get the NFS shares on a Windows Server, I managed to move one of my/etc of ESX host 'password' and 'group' files to a different location. I guess me to copy instead of move.

  Now, I can not log on the server ESX 4.1 via ssh, winscp or root or console. When you try to connect to the root account it says invalid password.

  Everything can avoid me having to rebuild the host from scratch? I don't have either no image from the server backup.

  Thanks in advance!

  With the help of the ESXi installed on USB works fine. Boot in ESXi. Use the vSphere client to connect to the new ESXi installation. ESXi should have picked up the ESX datastore, and you'll see the ESX VM console. It will be called esxconsole-blabla. Create a new virtual machine and do not create a vmdk. Select use an existing one and point the vmdk for esxconsole. Get a Linux rescue disc or most distributions can boot into rescue mode. You have to force the new virtual machine to boot from the rescue cd. Once you're started in rescue mode, you can mount the vmdk from ESX console. Add your files and restart without the USB.

• Random OS freeze or crash after the Upgrade of the Sierra

  Since the upgrade to Sierra, I started experiencing random freezes or crashes, the operating system.

  In general, I keep the mouse control (connected via trackpad), for at least a certain period of time. However, only the movement is possible - applications cannot be selected, there is no reaction to the clicks, etc. Attempts to pass via cmd + tab don't produce no result.

  I tried waiting for the system to respond. She finally slept, then crashed with a wake on the lack of sleep.

  The other answer is a hard reset by holding down the power until button a restart is forced.

  I ran disk in rescue mode utility, and he reported no problems with the disk. I've yet to try some of the more esoteric answers as reset NVRAM and so on... which is probably intended. I saw a report that said this problem was happening with El Capitan, and there is no resolution. I don't know if it's the same problem carried over, or a new.

  I got exactly the same problem you describe, on an iMac of retina of 2014. I've updated all non - App Store applications I have thought (and removed dozens of them), disabled launch points, unplugged my USB hub, downloaded EtreCheck (very useful application, incidentally) and road to combing through reports in the Library/Logs folder. On a Reddit thread on the problems with the Macs wake from sleep after installation of Sierra, someone suggested using the following command in a Terminal: kextstat | grep - v com.apple

  The command shows you what non-Apple kernel extensions are running in the background. Extensions of core apps such as Airparrot, strap, and duo caused problems with macOS Sierra. In my case, officer was running a kernel extension - then I deleted this app and went through my library/LaunchAgents and records of the library/LaunchDaemon, remove all items launch left by home and others deleted apps.

  EtreCheck reports said that so-called SIMBL caused several accidents. So I got rid of this, by following the instructions on the site SIMBL.

  Here's the problem: even after all these efforts (and each variant reset, I could think of) troubleshooting, nothing has changed. My Mac always has exactly the symptoms you describe, upon awakening from sleep. Every time.

  In the end I just gave up and restored my iMac to its State, 4 days ago in a backup using Time Machine. (It took 12 hours). With Dropbox, I didn't lose all of the work I've done in the meantime. So, I am now running a stable El Capitan, with an understanding to why people wait a few months before installing the latest OS updates.

  Sorry I can't offer more useful troubleshooting options - but perhaps some things that did not help me could help you anyway? Thanks for posting: it seems that the Sierra has been a pretty smooth update for most people, so I guess we're just out of luck?

• error: unknown file system

  Hello users of HP, I use ProBook 4530 s. Last year, I installed Microsoft Professional Home 64 bit. Yesterday, I delete the partition from my linux system and after that I get the following error;

  error: unknown file system.

  Enter rescue mode...

  grub rescue >

  I also followed the steps for recovery, but failed. How? I put the DVD in the window and the restart, after the initial stages, the screen on the install, I click on 'Recovery Option '. I received the message that the I have Window 7 is installed. After you click Next, it is said that the resovery window option is not compatible with the window. What to do in this case. I have install this window in my country, now I am in China, where every product of the window is in Chinese. Secondly, I have a lot more data research everything I hope you not own format in all cases. Please help me if possible guys.

  Best looks ahead

  as it happened after that you deleted linux I suggest to download an iso of ubuntu and start to see it if you anywhere

• LACP group does not work with stacked 2 DELL PC 6248 and ESXi 2 5.5

  I would like to use LACP/LAG in vSphere 5.5. So I created a new vDS and a group LAG. 2 NICs per host should be used for this. We use 2 hosts, so the total 4 ports are involved. Basically, you can refer to a diagram at vmwares KB article 2051826 (http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2051826)

  It's only 2 lacp group links are active, then the other 2 are inactive. Active is the only one of the esx hosts, it depends on which ports are going to be active first.

  Any advice? Someone at - it a config like this works?

  Best regards

  Alex

  The config for switch:

  ! Current configuration:
  ! Description of the system «PowerConnect 6248P, 3.3.7.3, VxWorks 6.5»
  ! 3.3.7.3 system software version
  ! Passage mode is configured as disabled
  battery
  1 5 Member
  2 5 Member
  output
  Configure

  interface ethernet 1/g8
  Auto mode channel-group 3
  Description "ESX2_vmnic5".
  Disable spanning tree
  switchport mode general
  switchport General disable filtering of capture
  switchport general allowed vlan add 20 tag
  output

  interface port-channel 3
  Description "ESX".
  hash-mode 6
  Disable spanning tree
  switchport mode general
  switchport General disable filtering of capture
  switchport general allowed vlan add 20 tag
  output

  Thanks to the good support at DELL.

  The secret is that you must create a separate group on the switch for each esx host. On the side of esx, you have the config with group a lacp/gal. But on the side of the switch, you need 2 groups for two guests. VMware should have this more clear I think.

• VWIC3-1MFT-T1/E1, showing no recorded in CUCM 10.5

  Hello

  I am trying to record E1 and FXO 8 with CUCM 10.5 using mgcp. FXOs are recorded in CUCM but not E1, it shows not registered. I have attached the configuration of the gateway and the CUCM screenshot. I use the software REL C2900, Cisco IOS Software (C2900-UNIVERSALK9-M), T3 Version 15.4 (1)
  EASY SOFTWARE. Please let me if there is no error in my configuration.

  AD_Voice_GW #show ccm-Manager
  MGCP domain name: AD_Voice_GW
  Host of priority status
  ============================================================
  Registered primary 10.20.13.9
  First backup ready 10.20.13.8
  Second backup none

  Current active call manager: 10.20.13.9
  Backhaul/redundant link port: 2428
  Failover interval: 30 seconds
  KeepAlive interval: 15 seconds
  Last keepalive sent: 14:39:48 GMT April 10, 2015 (duration: 00:00:12)
  )
  MGCP traffic last time: 14:39:48 GMT April 10, 2015 (duration: 00:00:12)
  )
  Last failover time: None
  Last hour switchback: None
  Switchback lifestyle: graceful
  MGCP rescue mode: unchecked
  Start time of last backup MGCP: None
  Last backup MGCP end time: None
  MGCP download ringtones: disabled
  TFTP retry count to close Ports: 2

  Backhaul link info:
  The link protocol: TCP
  Remote Port number: 2428
  Remote IP address: 10.20.13.9
  Current link status: OPEN
  Statistics:
  Recvd packages: 1
  Recv failures: 0
  Xmitted of packets: 2
  Xmit failures: 0
  PRI ports in return:
  Slot 0, VIC 0, port 0
  Automatic download of configuration information
  =======================================
  The current version id: 1428657466-23cb555c-fb36-457e-81fa-58438df308d4
  Last downloaded-config: 00:00:00
  Current situation: waiting for orders
  Configuration of download statistics:
  Download tried: 1
  Successful upload: 1
  Download failed: 0
  TFTP download failed: 0
  Configuration has attempted: 1
  Successful configuration: 1
  Setup Failed (Parsing): 0
  Configuration (config) Failed: 0
  Last command upload config: new registration
  FAX mode: disable
  History of configuration error:
  AD_Voice_GW #.

  ==============================================================================

  D_Voice_GW #show ISDN status
  Global ISDN Switchtype = primary-net5

  %Q.931 is back at CCM MANAGER 0 x 0003 lis 0. Out of layer 3 can not appl
  There

  ISDN Serial0/0/0: interface 15
  DSL 0, the interface ISDN Switchtype = primary-net5
  L2 Protocol = 0x0000 L3 = MANAGER of CCM protocols Q.921 0 x 0003
  Layer 1 status:
  SHUTDOWN
  Status of layer 2:
  TEI = 0, CES = 1, SAPI = 0, status = TEI_ASSIGNED
  Status of layer 3:
  0 active Layer 3 call (s)
  CCBs active dsl 0 = 0
  The free channel mask: 0x00000000
  Number of L2 ignores = 0, ID of Session L2 = 0
  Total allocated ISDN TSC = 0
  AD_Voice_GW #.

  =====================================================================================

  AD_Voice_GW #show mgcp endpoint

  E1 0/0/0 interface

  GIS-TYPE V-PORT ADMIN ENDPOINT NAME
    [email protected]/ * / 0/0/0 _Voice_G: 15 place
    [email protected]/ * / 0/0/0 _Voice_G: 15 place
    [email protected]/ * / 0/0/0 _Voice_G: 15 place
    [email protected]/ * / 0/0/0 _Voice_G: 15 place
    [email protected]/ * / 0/0/0 _Voice_G: 15 place
    [email protected]/ * / 0/0/0 _Voice_G: 15 place
    [email protected]/ * / 0/0/0 _Voice_G: 15 place
    [email protected]/ * / 0/0/0 _Voice_G: 15 place
    [email protected]/ * / 0/0/0 _Voice_G: 15 place
    [email protected]/ * / 0/0/0 _Voice_: 15 place
    [email protected]/ * / 0/0/0 _Voice_: 15 place
    [email protected]/ * / 0/0/0 _Voice_: 15 place
    [email protected]/ * / 0/0/0 _Voice_: 15 place
    [email protected]/ * / 0/0/0 _Voice_: 15 place
    [email protected]/ * / 0/0/0 _Voice_: 15 place
    [email protected]/ * / 0/0/0 _Voice_: 15 place
    [email protected]/ * / 0/0/0 _Voice_: 15 place
    [email protected]/ * / 0/0/0 _Voice_: 15 place
    [email protected]/ * / 0/0/0 _Voice_: 15 place
    [email protected]/ * / 0/0/0 _Voice_: 15 place
    [email protected]/ * / 0/0/0 _Voice_: 15 place
    [email protected]/ * / 0/0/0 _Voice_: 15 place
    [email protected]/ * / 0/0/0 _Voice_: 15 place
    [email protected]/ * / 0/0/0 _Voice_: 15 place
    [email protected]/ * / 0/0/0 _Voice_: 15 place
    [email protected]/ * / 0/0/0 _Voice_: 15 place
    [email protected]/ * / 0/0/0 _Voice_: 15 place
    [email protected]/ * / 0/0/0 _Voice_: 15 place
    [email protected]/ * / 0/0/0 _Voice_: 15 place
    [email protected]/ * / 0/0/0 _Voice_: 15 place

  [email protected]/ * / _Voice_GW
  [email protected]/ * / _Voice_GW
  [email protected]/ * / _Voice_GW
  [email protected]/ * / _Voice_GW
  [email protected]/ * / _Voice_GW
  [email protected]/ * / _Voice_GW
  [email protected]/ * / _Voice_GW
  [email protected]/ * / _Voice_GW

  AD_Voice_GW #.

  Since ISDN layer 1 was showing as Deactivated/Shutdown, crc4 framing so could cause.

  regds,

  Aman

• Incompatible print cartridge error message

  Below you can find a video on setting a cartridge print Incompatible error message in an Officejet J4680 printer. The steps it will show you how to do the following procedures.

  1. Remove and inspect the cartridges

  2. how to clean cartridges and what materials to use for this process.

  3. replace the cartridge

  4. printing in the mode back.

  The stages of care cartridge will work on all printers that have the HPI cartridges.  IPH cartridges are those who come in all black and tri-color and have no individual cyan, magenta, and yellow colors. This is also true when the video talking about printing in backup mode as some printers with cartridges IPH are able to print in rescue mode when a cartridge is missing from the printer.

  I hope the community finds this video to be useful.

• Inspect traffic over the policy apply

  Hi people

  I use Virtual Center of 64-bit version 5.3.1.4 defense and I'm trying to understand this option under the access control strategy - Advanced tab. What I try to do, is to allow the loss less than policy changes, at the moment with this option enabled, there are a few seconds interruption of network traffic when the policy is applied. I use inline module of firepower on an ASA5525 by the way. It seems natural that there should be an interruption while the configuration is reloaded on an online service, but the manual is not very clear about the box.

  Someone has a better idea what is this option?

  Concerning

  Fredrik

  Hi all

  Let me add in it.

  Power module of fire ASA because of changes in policy or any other reason causing snort recharge. Feature 'feature inspect during the policy applies"does not work for the SAA. The reason behind this is the architectural difference between the devices of firepower (material of the series 7000 and 8000) and modules ASA firepower. In devices, there is a charging wire that supports policy changes without affecting the current treatment of traffic.

  Old behavior (5.4.0.4, 5.4.1.3 and before)

  ASA in rescue mode is based on the heartbeat sensor dplane response to work around the packages. But what snort process restarts due to policy change or driver of any other ground of the sensor responds to the heartbeat ASA and ASA never understands if Snort processes are declining. In this case, ASA continue to send packets to sensor (with Snort down) as well as the packages are removed causing a breakdown of small network size.

  Ill CSCuv91730 (for ASA) and CSCuu68273 (firearms) were introduced to solve this problem.

  New behavior (5.4.0.5, 5.4.1.4 and later versions)

  With the new behaviors introduced ASA will send rescue configuration to sensor backplane header. This information is sent to basic package by the context. ASA expects this sensor to return the package if the flag is set, and even Snort fell. Then, when ASA will receive the same package the snort is down.

  ASA press release fixed side has been published on ORC, but we are still waiting for Sourcefire side fixed (it was fixed, we are waiting for fixed output but I guess a fix is available for this.)

  Thank you

  Dinkar

• After system upgrade...

  Hi, today I had update my laptop due to black screen problem...

  However, now I have the following problem. It won't let me access the C drive,

  Download files or install programs. And it gives me some error messages from radom.

  And yes I am the admin of this laptop I have to ensure that.

  does anyone know the solution for this problem?

  My laptop: Sony Vaio E 14 p Win8, 16 GB of RAM, 1 TB of HDD, CPU intel i7 quad core

  A refresh has not worked or due to corruption or you might try an initial software configuration recovery.

  • Turn on the unit by pressing help
  • Select recovery (F10) option
    (The VAIO logo will appear)
  • Select your language (US)
  • Select Troubleshooting
  • Select the restoration and maintenance
  • Select Windows 8
    (VAIO Care rescue mode will launch)
  • Select Start the Recovery Wizard
    (Here you have the possibility to save data with data Rescue, or you can Skip Rescue to start the recovery)
  • Click on the box "Yes, I'm Sure" and click on Start Recovery
    (all data will be wiped off of the reader)