VWIC3-1MFT-T1/E1, showing no recorded in CUCM 10.5
Hello
I am trying to record E1 and FXO 8 with CUCM 10.5 using mgcp. FXOs are recorded in CUCM but not E1, it shows not registered. I have attached the configuration of the gateway and the CUCM screenshot. I use the software REL C2900, Cisco IOS Software (C2900-UNIVERSALK9-M), T3 Version 15.4 (1)
EASY SOFTWARE. Please let me if there is no error in my configuration.
AD_Voice_GW #show ccm-Manager
MGCP domain name: AD_Voice_GW
Host of priority status
============================================================
Registered primary 10.20.13.9
First backup ready 10.20.13.8
Second backup none
Current active call manager: 10.20.13.9
Backhaul/redundant link port: 2428
Failover interval: 30 seconds
KeepAlive interval: 15 seconds
Last keepalive sent: 14:39:48 GMT April 10, 2015 (duration: 00:00:12)
)
MGCP traffic last time: 14:39:48 GMT April 10, 2015 (duration: 00:00:12)
)
Last failover time: None
Last hour switchback: None
Switchback lifestyle: graceful
MGCP rescue mode: unchecked
Start time of last backup MGCP: None
Last backup MGCP end time: None
MGCP download ringtones: disabled
TFTP retry count to close Ports: 2
Backhaul link info:
The link protocol: TCP
Remote Port number: 2428
Remote IP address: 10.20.13.9
Current link status: OPEN
Statistics:
Recvd packages: 1
Recv failures: 0
Xmitted of packets: 2
Xmit failures: 0
PRI ports in return:
Slot 0, VIC 0, port 0
Automatic download of configuration information
=======================================
The current version id: 1428657466-23cb555c-fb36-457e-81fa-58438df308d4
Last downloaded-config: 00:00:00
Current situation: waiting for orders
Configuration of download statistics:
Download tried: 1
Successful upload: 1
Download failed: 0
TFTP download failed: 0
Configuration has attempted: 1
Successful configuration: 1
Setup Failed (Parsing): 0
Configuration (config) Failed: 0
Last command upload config: new registration
FAX mode: disable
History of configuration error:
AD_Voice_GW #.
==============================================================================
D_Voice_GW #show ISDN status
Global ISDN Switchtype = primary-net5
%Q.931 is back at CCM MANAGER 0 x 0003 lis 0. Out of layer 3 can not appl
There
ISDN Serial0/0/0: interface 15
DSL 0, the interface ISDN Switchtype = primary-net5
L2 Protocol = 0x0000 L3 = MANAGER of CCM protocols Q.921 0 x 0003
Layer 1 status:
SHUTDOWN
Status of layer 2:
TEI = 0, CES = 1, SAPI = 0, status = TEI_ASSIGNED
Status of layer 3:
0 active Layer 3 call (s)
CCBs active dsl 0 = 0
The free channel mask: 0x00000000
Number of L2 ignores = 0, ID of Session L2 = 0
Total allocated ISDN TSC = 0
AD_Voice_GW #.
=====================================================================================
AD_Voice_GW #show mgcp endpoint
E1 0/0/0 interface
GIS-TYPE V-PORT ADMIN ENDPOINT NAME
[email protected]/ * / 0/0/0 _Voice_G: 15 place
[email protected]/ * / 0/0/0 _Voice_G: 15 place
[email protected]/ * / 0/0/0 _Voice_G: 15 place
[email protected]/ * / 0/0/0 _Voice_G: 15 place
[email protected]/ * / 0/0/0 _Voice_G: 15 place
[email protected]/ * / 0/0/0 _Voice_G: 15 place
[email protected]/ * / 0/0/0 _Voice_G: 15 place
[email protected]/ * / 0/0/0 _Voice_G: 15 place
[email protected]/ * / 0/0/0 _Voice_G: 15 place
[email protected]/ * / 0/0/0 _Voice_: 15 place
[email protected]/ * / 0/0/0 _Voice_: 15 place
[email protected]/ * / 0/0/0 _Voice_: 15 place
[email protected]/ * / 0/0/0 _Voice_: 15 place
[email protected]/ * / 0/0/0 _Voice_: 15 place
[email protected]/ * / 0/0/0 _Voice_: 15 place
[email protected]/ * / 0/0/0 _Voice_: 15 place
[email protected]/ * / 0/0/0 _Voice_: 15 place
[email protected]/ * / 0/0/0 _Voice_: 15 place
[email protected]/ * / 0/0/0 _Voice_: 15 place
[email protected]/ * / 0/0/0 _Voice_: 15 place
[email protected]/ * / 0/0/0 _Voice_: 15 place
[email protected]/ * / 0/0/0 _Voice_: 15 place
[email protected]/ * / 0/0/0 _Voice_: 15 place
[email protected]/ * / 0/0/0 _Voice_: 15 place
[email protected]/ * / 0/0/0 _Voice_: 15 place
[email protected]/ * / 0/0/0 _Voice_: 15 place
[email protected]/ * / 0/0/0 _Voice_: 15 place
[email protected]/ * / 0/0/0 _Voice_: 15 place
[email protected]/ * / 0/0/0 _Voice_: 15 place
[email protected]/ * / 0/0/0 _Voice_: 15 place
[email protected]/ * / _Voice_GW
[email protected]/ * / _Voice_GW
[email protected]/ * / _Voice_GW
[email protected]/ * / _Voice_GW
[email protected]/ * / _Voice_GW
[email protected]/ * / _Voice_GW
[email protected]/ * / _Voice_GW
[email protected]/ * / _Voice_GW
AD_Voice_GW #.
Since ISDN layer 1 was showing as Deactivated/Shutdown, crc4 framing so could cause.
regds,
Aman
Tags: Cisco Support
Similar Questions
-
Circuits group with cards VWIC2-1MFT-T1/E1 and VWIC3-1MFT-T1/E1
Hi all
I have a router 2821 with 2 cards to VWIC2-1MFT-T1/E1 x connections ppp in a bundle, we replace it by a 2951 but also add a new ppp link, we would like nevertheless to re-use the existing VWIC2 cards and just get a new card VWIC3-1MFT-T1/E1 to add this additional link from the same batch, my question here: would it be possible to have a job with vwic2 and vwic3 maps multiple links?
Thanks for your help.
Hello
I just checked one of my routers. I have the Panel multilink ppp on two different modules. WIC-1dsu-t1-v2 and VWIC2-1MFT-T1/E1. So it should work in your case too.
multiple links are working properly.
It will be useful,
Masoud
-
VWIC3-1MFT-T1/E1 on Cisco 2811
Hello community,
VWIC3- 1MFT-T1/E1 is compatible with router Cisco 2811 (revision 53.51)?
Currently, I get the following error:
WIC Slot 0:
Daughter unknown WAN card
Module WIC unsupported / disabled this slot machine
Hardware revision: 1.0
Number of albums part together: 800-34657-01
Part number: 73-13419-01
Review on board: B0
Deviation number: 0
Version of fab: 05
Serial number of PCB: FOC1624628F
Version identifier: V01
Product number (FRU): VWIC3-1MFT-T1/E1
CLEI Code: COUIA7PCAA
History of the RMA tests: 00
RMA number: 0-0-0-0
RMA history: 00
EEPROM 4 format version
Table of contents EEPROM (hex):
0 X 00:04 FF 40 06 00 01 41 46 03 20 00 87 61 01 C0 ED
0 X 10: 82 49 34 6 B 01 42 42 30 88 00 00 00 00 02 05 C1
0 X 20: 8B 4F 46 43 31 36 32 34 36 32 38 46 89 56 30 31
0X20 30: 2D CB 90 56 57 49 43 33 31 4 46 54 54 31 2D
0X40: 2F 45 31 C6 8 A 43 55 49 41 37 50 43 41 41 03 4F
0 X 50: 00 81 00 00 00 00 04 00 03 40 C1 CB FF FF FF D9
0 X 60 : FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0 X 70 : FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF #
Thank you very much in advance for your quick responses.
George
Hi George,.
Unfortunately not supported on any series 2800
The Cisco® third generation-1, 2 or 4-channel T1/E1 Multiflex Trunk voice/WAN (MFT VWIC3s) support voice and data applications Interface on the Cisco 1921, 1941 and 1941W (data only) and the Cisco 2901 2911 2921, 2951, 3925, 3945, routers to Services integrated 3925th and 3945TH.
Table 1. Supported Cisco MFT VWIC3 platforms and Cisco IOS Software Release requirements minimum
VWIC3-1MFT-T1/E1
VWIC3-2MFT-T1/E1
VWIC3-1MFT-G703
VWIC3-2MFT-G703
VWIC3-4MFT-T1/E1
Slot machines Cisco 1900 chassis EHWIC
(1) M3 15.0, 15.1 (1) T1, 15.1 (2) T
(1) M3 15.0, 15.1 (1) T1, 15.1 (2) T
(1) M3 15.0, 15.1 (1) T1, 15.1 (2) T
(1) M3 15.0, 15.1 (1) T1, 15.1 (2) T
N/A *.
Slot machines Cisco 2900 chassis EHWIC
(1) M3 15.0, 15.1 (1) T1, 15.1 (2) T
(1) M3 15.0, 15.1 (1) T1, 15.1 (2) T
(1) M3 15.0, 15.1 (1) T1, 15.1 (2) T
(1) M3 15.0, 15.1 (1) T1, 15.1 (2) T
15.1 (3) T *.
Slot machines Cisco 3900 chassis EHWIC
(1) M3 15.0, 15.1 (1) T1, 15.1 (2) T
(1) M3 15.0, 15.1 (1) T1, 15.1 (2) T
(1) M3 15.0, 15.1 (1) T1, 15.1 (2) T
(1) M3 15.0, 15.1 (1) T1, 15.1 (2) T
15.1 (3) T
* VWIC3-4MFT-T1/E1is supported by Cisco 2911 2921 2951 and, routers Cisco 3900 Series
http://www.Cisco.com/en/us/prod/collateral/routers/ps5855/data_sheet_c36-609138.html
See you soon!
Rob
"Why don't the best things always go away."
-The band
-
How can I use ODE independently OWD unaided, but showing the record of decision?
Hi all
I want to integrate the OPA with my java application without using the OWD.
But how can I show the record of decision like that of OWD?
Thank you
This should be fairly simple. You can obtain a record of decision of the engine API. The decision paper referred is a tree of nodes that are very similar to the decision in OWD HTML report, it should just be a matter of this tree to market and building an html like structure.
Take a look on example: retrieve a record of decision for an example of how to retrieve a record of decision.
-
is it possible, end point of video recorded in CUCM call standalon SX10 via SIP Trunk?
Dear all,
Need help :)
1.
is it possible, end point of video recorded in CUCM call standalon SX10 via SIP Trunk?
my customers will not buy TP - lic :)
Topology:
8900 (jabber) - CUCM-(SIP) - SX10
2.
Customer, have MCU machine.
If not possible. is it possible, meeting point of MCU use?
Topology:
8900 (jabber) - CUCM - MCU - SX10
1. Yes, but it is not that simple and straightforward that the SX10 can be reached by calling is the public IP address and CUCM does not support the IP address numbering is not a SIP address format...
2. Yes, using the MCU would be much simpler, easier and, in my opinion, a better solution to be implemented. Here is an example of how a stand-alone SX10 could dial the IP address of the MCU standard automatic.
You can also assign a SIP URI address to the meeting point which the SX10 can connect to.
/Jens
Please note the answers and score the questions as "answered" as appropriate.
-
Show only records from OWNER...
Hi developers out there!
Question:
I have 2 users, at least in my application.
They are able to insert records in TableA. On the same page, they have a 'SQL report' that shows the recently inserted rows.
Is it possible to display for UserA as its lines (he inserted), when salvation is connected.
It goes the same for UserB.
I guess it has something to do with #OWNER #.
Best regards
Ruslan.Hi Ruslan,
It is typical to add a standard set of fields to tables:
CREATED_BY
CREATED_DT
UPDATED_BY
UPDATED_DTand these using a trigger that uses SYSDATE to fill the... fields ._DT and v ('APP_USER') for the... ._BY fields. In this way, you can keep track of who inserted/updated files and you can use them to filter the reports by user.
Andy
-
Results page only shows partial recording
Hello everyone: I'm new to this forum and I would like to ask for help. I've searched and searched but cannot find the answer to my problem on this forum or others.
I have a problem is the following;
I have a results page that displays the complete one version a unique story. I'm pulling the story with a simple URL parameter. The Tagus PHP for the assigned field contains a statement simple nl2br and I use not all complex queries to extract data.
When I update registration update page I get no errors of any kind, but when I load the page that displays the record being updated, the value of the field in question is trucated.
I see no problem with any of the code, and I'm pretty baffled by the latter.
Here's the code for the record display
<? PHP echo nl2br ($row_rsNews ['story']); >
And this is the code for the update action
<? PHP
function GetSQLValueString ($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
{
$theValue = (! get_magic_quotes_gpc())? addslashes ($TheValue): $theValue;
Switch ($theType) {}
case 'text ':
$theValue = ($theValue! = "")? « " ». $theValue. "" "": "NULL";
break;
case "long":
case "int":
$theValue = ($theValue! = "")? intval ($TheValue): 'NULL ';
break;
case "double":
$theValue = ($theValue! = "")? « " ». doubleVal ($TheValue). "" "": "NULL";
break;
case "date":
$theValue = ($theValue! = "")? « " ». $theValue. "" "": "NULL";
break;
case "set":
$theValue = ($theValue! = "")? $theDefinedValue: $theNotDefinedValue;
break;
}
Return $theValue;
}
$editFormAction = $_SERVER ['PHP_SELF'];
If (isset {}
$editFormAction. = « ? ». htmlentities($_SERVER['QUERY_STRING']);
}
If ((isset($_POST["MM_update"])) & & ($_POST ["MM_update"] == "updatenews")) {}
$updateSQL = sprintf ("news SET 'date' = %s, subtitle = %s, title = %s, history = %s, image = %s, thumb = WHERE id = %s %s",
GetSQLValueString ($_POST ['date'], 'day'),
GetSQLValueString ($_POST ["'subtitle"], "text").
GetSQLValueString ($_POST ['title'], "text").
GetSQLValueString ($_POST ['history'], "text").
GetSQLValueString ($_POST ['image'], "text").
GetSQLValueString ($_POST ['thumb'], "text").
GetSQLValueString ($_POST ['id'], "int"));
@mysql_select_db ($database_ifbdb, $ifbdb);
$Result1 = mysql_query ($updateSQL, $ifbdb) or die (mysql_error ());
$updateGoTo = "news_list.php";
If (isset {}
$updateGoTo. = (strpos ($updateGoTo, '?'))? « & » : « ? » ;
$updateGoTo. = $_SERVER ['QUERY_STRING'];
}
header (sprintf ("location: %s", $updateGoTo));
}
$colname_rsNews = "-1";
If (isset($_GET['id'])) {}
$colname_rsNews = (get_magic_quotes_gpc())? $_GET ['id']: addslashes($_GET['id']);
}
@mysql_select_db ($database_ifbdb, $ifbdb);
$query_rsNews = sprintf ("SELECT * FROM new WHERE id = %s", $colname_rsNews);
$rsNews = mysql_query ($query_rsNews, $ifbdb) or die (mysql_error ());
$row_rsNews = mysql_fetch_assoc ($rsNews);
$totalRows_rsNews = mysql_num_rows ($rsNews);
? >
I would really appreciate any help that this group has to offer.Hi Gunther:
I'm really very embarrassed, on this subject, but I think I found the problem...
I had a look at the configuration of the table in MySQL Administrator, and he had the problem look me right in the face...
'History' field has been set to varchar (255). I have reset TEXT and everything is fine now!
Please accept my sincerest thanks for your help. Your suggestion to check if I was using a textarea is prompting me to check the datatye again. I don't know how he's changed, but I know now where to check first if it happens again.
Thaks a ton!
-
Working in Lightroom I click with the right button on my photo and edit in Photoshop. I have saved from Photoshop and continued to work, once finished I still saved in Photoshop. Then, I made my way on Lightroom to edit the photo. Now the question here. When I'm looking at the picture in the library or double-click on the photo and the view, I see my most recent save. But the second that I develop, BOOM! My picture back to my previous save. I did this editing process between PS and LR of hundreds of times and have not encountered this problem before. What I am doing wrong? What have I done?
Thank you
Garrett
Hi garrett_s
Which version of Photoshop and Lightroom are you using?
Please uncheck the box "Use Graphics Processor" in preferences > Performance (if you use the CC/6 version)
Restart Lightroom
Let us know if this helps
Concerning
Assani
-
Show all records in the search results, please help
I have this before posting, but had no chance I used my script to search before but tried again and he's back ALL results of the DB... Can you see what I'm missing?
$var_SalaryReq_Recordset1 = '% ';
If (isset($_GET['SalaryReq'])) {}
$var_SalaryReq_Recordset1 = $_GET ['SalaryReq'];
}
$var_skills_offered_Recordset1 = '% ';
If (isset($_GET['skills_offered'])) {}
$var_skills_offered_Recordset1 = $_GET ['skills_offered'];
}
$var_location_Recordset1 = '% ';
If (isset($_GET['location'])) {}
$var_location_Recordset1 = $_GET ['location'];
}
$var_PositionReq_Recordset1 = '% ';
If (isset($_GET['PositionReg'])) {}
$var_PositionReq_Recordset1 = $_GET ['PositionReg'];
}
@mysql_select_db ($database_hostprop, $hostprop);
$query_Recordset1 = sprintf ("SELECT username, name, surname, SalaryReq, PositionReq, location, otherComments, skills_offered FROM think_signup WHERE SalaryReq LIKE %s or PositionReq AS location, AS GOLD skills_offered GOLD AS %s %s %s", GetSQLValueString ("%". ") $var_SalaryReq_Recordset1. '%', 'text'), GetSQLValueString ('%'. $var_PositionReq_Recordset1.) '%', 'text'), GetSQLValueString ('%'. $var_location_Recordset1.) ('%', 'text'), GetSQLValueString ('%'. $var_skills_offered_Recordset1, "text"));
$query_limit_Recordset1 = sprintf ("%s LIMIT %d, %d", $query_Recordset1, $startRow_Recordset1, $maxRows_Recordset1);
$Recordset1 = mysql_query ($query_limit_Recordset1, $hostprop) or die (mysql_error ());
$row_Recordset1 = mysql_fetch_assoc ($Recordset1);
the search fields are
< input name = "PositionReq" type = "text" class = "textfeilds" value = "Job title" size = "32" / >
< input name = "skills_offered" type = "text" class = "textfeilds" value = "Required skills" size = "32" / >
< input name = "SalaryReq" type = "text" class = "textfeilds" value = "Salary offered" size = "32" / >
< input name = "location" type = "text" class = "textfeilds" value = "Location" size = "32" / >
Thanks in advance
Sorry, just need a push of foot. "%"
Thanks for the prompt.
concerning
-
Activate a call encrypted on SX80 recorded on CUCM
Hello community,
We have heaps of endpoints SX80 on CUCM. We are trying to activate the encrypted call but cannot work.
On the endpoints SX80 Configuration > conference set us the encryption mode on IT. If we try to point-to-point call, the call is not to connect. The two end points are set to Encryption mode WE. When the best value Effort it works but it says ' do not call encrypted.
Are there settings that we need to check on the side CUCM?
Thank you.
Are you using a non-secure telephone profile or secure?
To enable encryption, you must use a secure phone profile. See the "Encrypted vs encrypted communication" section the Telepresence Endpoints Deployment Guide for CUCM 11.0.1 (CE8.0) on pg 4.
-
How to record outside CUCM endpoint
Lab deployment, we have:
Cisco VCS-E
Cisco VCS - C
Cisco CUCM
IM & P
SX20 Cisco (internal)
Cisco EX90 (external)
I have a problem:
I registed successful Cisco internally BUT EX 90 SX20 cannot save of CUCM from outside. How should I do?
Please, support me.
Thank you!
You must configure your VCS - C and E to do Mobile and remote access (ARM), which will allow to the external endpoints if registered to the CUCM that sits on the network internal. See the VCS configuration guides, for your version of VCS, here's one for VCS X8.5.
-
LOV opened from column in the table always showing only 25 records
Hello. I'm on Jdev 11 g R1.
I have main VO with an attribute with LOV (entry LOV). The LOV VO defined in tuning as 'all lines' and range is set to-1
Main LOV fell into the page and column is made in the form of entry-level LOV as expected. Everything works ok.
But when I opened the LOV is showing 25 records. I have to scroll to the end and click on the button "Search" once again to see the rest of the records (total 48). It shows not all records and scrolls automatically when I start to scroll down, but stops at 25 records.
I can't change the size of the beach of LOV since it is located in the table, so there is no access to the iterator LOV.
How can I force LOV to see all records?
As far as I KNOW, there is a bug in 11.1.2.x (and if you have a support contract, you can request the fix for it)
Also associated with R1: list of input values does not fetch all records of documents only 25 are read
Dario
-
Ask the deptno 20 last record at the end show
Oracle 9i Database
I want to create a query that shows records, Deptno 20 last record at the end.
application of shot show all records that are in the emp table.
I want the resultSQL> select empno,ename,job,deptno, row_number() over (order by deptno) rno from emp; EMPNO ENAME JOB DEPTNO RNO ---------- ---------- --------- ---------- ---------- 7782 CLARK MANAGER 10 1 7839 KING PRESIDENT 10 2 7934 MILLER CLERK 10 3 7369 SMITH CLERK 20 4 7876 ADAMS CLERK 20 5 7902 FORD ANALYST 20 6 7788 SCOTT ANALYST 20 7 7566 JONES MANAGER 20 8 7499 ALLEN SALESMAN 30 9 7698 BLAKE MANAGER 30 10 7654 MARTIN SALESMAN 30 11 EMPNO ENAME JOB DEPTNO RNO ---------- ---------- --------- ---------- ---------- 7900 JAMES CLERK 30 12 7844 TURNER SALESMAN 30 13 7521 WARD SALESMAN 30 14 14 rows selected. SQL>
ConcerningEMPNO ENAME JOB DEPTNO RNO ---------- ---------- --------- ---------- ---------- 7566 JONES MANAGER 20 8 7499 ALLEN SALESMAN 30 9 7698 BLAKE MANAGER 30 10 7654 MARTIN SALESMAN 30 11 7900 JAMES CLERK 30 12 7844 TURNER SALESMAN 30 13 7521 WARD SALESMAN 30 14
with t as ( select 7782 e1,'CKING ' e2 , ' PRESIDENT ' e3 , 10 e4 from dual union all select 7934, 'MILLER' , 'CLERK ' , 10 from dual union all select 7369, 'SMITH ' , 'CLERK ' , 20 from dual union all select 7876, 'ADAMS' , 'CLERK ' , 20 from dual union all select 7902, 'FORD ' , 'ANALYST ' , 20 from dual union all select 7788, 'SCOTT' , 'ANALYST ' , 20 from dual union all select 7788 ,' SCOTT ' ,'ANALYST ' , 20 from dual union all select 7566, 'JONES ', 'MANAGER ' , 20 from dual union all select 7499, 'ALLEN ' , 'SALESMAN' , 30 from dual union all select 7698, 'BLAKE ' , 'MANAGER ' , 30 from dual union all select 7654, 'MARTIN' , 'SALESMAN ' , 30 from dual union all select 7900, 'JAMES ' , 'CLERK ' , 30 from dual union all select 7844, 'TURNER' , 'SALESMAN ' , 30 from dual union all select 7521 ,'WARD ' , 'SALESMAN ' , 30 from dual ) SELECT o.* FROM (SELECT p.*, MAX (CASE WHEN p.e4 = 20 THEN p.rno END) OVER (ORDER BY p.e4) AS mx FROM (SELECT a.*, ROW_NUMBER () OVER (ORDER BY e4) rno FROM t a) p) o WHERE o.rno >= o.mx
-
Toshiba HDD & dvd/VCR recorders record in what format to DVD-R discs?
In 2008, I paid £190 on Amazon for a HARD & DVD/VCR player disc with free view, model rd-xv48dtkb.
I've done many DVD-R disc full of TV shows I record with her, but when I take them to friends they don t game!What is the format makes this machine to record videos in mpeg4 or divx for example?
He seems to play avi, divx files ok but what other formats read it? for example, mpeg4, mpeg2 etc...
Can Toshiba or anyone who knows tell me as soon as possible, which is the biggest flaw I've found with the machine.
Also, if I put a DVD in my pc detected disks even not! Serious flaw.What software should I in a pc to detect the Toshiba has decided to use the file format?
Hello
Above all that it is a forum for computer/laptop Toshiba that I doubt there are many people who have experience with your standalone DVD recorder.
But I have some advice for you;
Check the configuration settings. There should be something about the format that is supported.
Check if the HARD drive (where the films are stored) has been chosen correctly.Maybe the videos are saved to the. Standard VOB my writer did.
-
Finder shows do not all files after upgrade to El Capitan
I've recently upgraded the OS on my iMac to Snow Leopard to El Capitan version 10.11.4.
Since the upgrade Finder shows all records.
I used to have a folder called 'Music', containing a large number of MP3 and WMA files, I had transferred my collection of CD so I could listen to them on my Sonos system. These files are still there, I can see them in "My files", but the record they were in shows no more, so the Sonos software cannot find them.
Finder displays 'Favorites', but not records such as users (understand me and the under 'Music' folder) no longer appear.
If I right click on a music file and select 'get info', I see that the old structure of the file is still there, but the Finder does not systematically.
How can I make Finder show all folders on the hard drive?
System information:
iMac (21.5 inch, late 2009)
3.06 GHz Intel Core 2 Duo processor
4 GB 1067 MHz DDR3 memory
Boot hard drive Macintosh disk
NVIDIA GeForce 9400 256 MB graphics card
Open Finder > Preferences and click on the button of the sidebar. Add checks for folders and drives that you want to appear on the sidebar of the Finder.
Maybe you are looking for
-
Satellite P750 - Windows 10 - WiFi does not
Hi all My WiFi stopped working when I upgraded to Windows 10.Someone knows how it be restarted? ~
-
Windows Server 2003 clustering - latest addition hw to the cluster
Hello I have a two-node Windows Server 2003 the material is HP/ProLiant BL45p G1 and cluster support. I bought two new HP/ProLiant BL465c g-7 to replace the old servers with. Is it possible to add new nodes to the cluster and failover of SQL 2000 d
-
After upgrading my computer Windows Vista to Windows 7 (64-bit), my ejection and bass/treble buttons do not work. My volume buttons / mute work however, after I installed HP MediaSmart SmartMenu (sp45140.exe). In any case, I tried to install HP Tone
-
Windows 7 DVD + RW formatting
I tried to format a DVD + RW using an Aspire 5732Z (Windows 7 64 bit) with the "quick format" check box unchecked. The progress bar moves pretty quickly and I get a "full Format" pop-up message after only a few seconds. However, the drive continues t
-
We have a physically inaccessible WAP4410N because of its location on top of a large warehouse. It is online and functioning, but we have no record of the password to login and change the settings of the administrative apparatus. Is it possible to re