ESXi 4.0 / 4.1 Broadcom iSCSI installation program / Support with unloading iSCSI

Similar Questions

• Query related to multi site VMWare esxi 5 according to the installation program.

  Hi all

  We have several distributed sites based on vSphere 5 according to the installation program which are the ESXi host 5.1, 5.1 vCenter and a storage for each site... Now, we anticipate adding distributed locations all host esx to vCenter built one of our new site.

  So, what should be the best way to achieve this.

  (1) is it advisable to add the distributed over wan to vCenter site on a different location?

  (2) can we also go with modes related? Since all our existing site already live, do we need to re - install vCenter to have bound mode installed?

  Concerning

  Varun Khatri

  Hi, as long as you have enough bandwidth between sites, you can add you remote cluster to vcenter.  I've done this before and I had no problems.  Your approach depends on the configuration of your environment.  If you have existing vCenter installed on each site, you can use the linked modes, and you don't need to reinstall to set up connected mode. vSphere Documentation Centre

• ESXi 5.1 Lab question (resolution/iSCSI discovery)

  I have setup a physical environment 2 node ESXi works as expected.

  iSCSI, WDS/PXE, DHCP, DNS, LDAP are all setup and running on a Windows Server, vCenter (VM) is configured and works perfectly.

  Looking to set up RS using VR through 2 virtual data centers I raised 4 VM I deployed ESXi 5.1 using the WDS/PXE of R2 2013 server and everything worked perfectly (wise deployment).

  The use of Kickstart scripts ESXi hosts are fully deployed to VM with 1 GB of storage (sufficient), IP stack, host name, etc. everything is correct.

  First number using the "Test management network' fails resolve host names of all 4 systems (Pings from the work of gateway and dns addresses.). But if I ssh in the hosts and the use of nslookup I can solve all well? Whats up with that?

  
  

  Second question which I think is related, is that I am setting up an iSCSI S/W to each adapter and you have configured ldevs/LUN with chap authentication identically as I did for the physical data center and I can't auto-discovery or entries static to discover the storage provisioned. the IQN name have the hostname in them which I believe is originally a resolution problem. For the Autodiscover I use the IP address of the iSCSI server so there is on the resolution of current names.

  All them is on a subnet (255.255.255.0) single 10.10.10.x/24.

  Anyone who can get an idea of why this is happening I would appreciate the help!

  Found the problem...

  Have a Gateway Appliance ClearOS which has several interfaces causing a loop.

  It cleared up and removed the questions.

• ESXi on HP BL460C to EVA SAN, Installer does not see the disk non - ESX(I) Although not

  We have a BL460C with qlogic (QMH2462), talk to an EVA 4400 SAN with LUNS = 1 presented for a boot disk and LUN = 2 for the data store.

  San switch is Silkier, if all the paths are visible.  We have installed ESX 3.5.0 u3 on this blade to the same LUN.  The goal is to support an environment entirely multichannel without interaction of zoning, so far all porous bones have been configured to work fine until we tried ESXi

  When we try to install ESXi 3.5.0 u3 for the same logical unit number, the installer décompacte, starts, appears to find the discs and stops with an error "device cannot find support to write... on the image for.

  Is there a driver/known compatibility issue with the ESXi installation program that prevents installation in a multi-channel environment?

  I don't think that ESXi supports booting from SAN.  This is perhaps where the fuse box is.

  You must use the local storage, or possibly a 1 GB (or more) USB stick to boot from.

  Jase McCarty

  http://www.jasemccarty.com

  Co-author of VMware ESX Essentials in the virtual data center

  (ISBN:1420070274) Auerbach

  _{Please consider awarding points if this post was helpful or appropriate}

• Link new installation of thunderbird with the old profile.

  I created a new profile and stored on an external drive, there is a certain messages, I just had to reinstall win7 and do not know how to link a new installation of thunderbird with my old profile. Seems fair to get a host of issues that do nothing.

  Look at https://support.mozilla.org/en-US/kb/profiles-tb#w_how-to-find-your-profile and then go to the directory corresponding to your external drive to find your old * *.default file.
  Copy your old profile to the directory where your current profile is stored.
  See https://support.mozilla.org/en-US/kb/using-multiple-profiles to switch to your old GOLD "profiles.ini" edit profile to change the 'path' in the name of your old profile.
  Restart Thunderbird.

• Problems when I want to update my complete system Mavericks using a USB key with the installation program.

  I want to "Refresh" my Mavericks home cleaning system and I still have a USB key with the complete installation program.

  With this USB key, I installed successfully already before Mavericks. Now, I want to repeat the installation by booting from USB key. But when the installation starts early an alert appears, said something like "... the verification failed - something is changed on the volume...". "and the cant of the installation continues.

  I've archived the original "OS X Mavericks installieren.app" from the app store and I have properly prepared another USB key using the terminal app, referencing the original installer, but I still get this alert when I try to install with this new USB.

  It is necessary for me to work with the Mavericks, because it's the latest version of the system on which I can run Adobe Creative Suite CS6 correctly. With the later versions of OS X, I get problems on my Mac Pro (end of 2008).

  I wonder what could happen with my first USB data, as I have already installed Mavericks successfully with it under the same conditions and after that he never touched the stick again so far. What can I do? What is the reason for this? Y at - there a site where I can get help or advice to solve the problem or if necessary can I re-download an Installer 'fresh '?

  Thank you and what is Berlin

  You can make a bootable USB to install using this free program that will do all the work for you. Try running disk utility/repair disk be before installation.

  Bootable USB Flash Drive-Diskmaker X

• Recovery disk Tecra M2 installs but happens with incomplete installation

  Tecra M2 worked fine, it's a good little machine without running out of space.
  I tried to install a new drive HARD 160 GB (Seagate) was 60 GB (Hitachi).
  I used the recovery on the new HARD drive disk, it formats the drive sets up XP Professional, gets that me recorded by Microsoft OK, but when the laptop wants to run Windows it bombards gives me a blue screen ('dumping' memory etc.).
  When the laptop reboots, in "Safe Mode" message pops up that the 'Installation was incomplete. Re-install Setup.
  First question: -.
  Is it possible to 'fix' the installation with the recovery disk?
  Another disk of Windows XP CD - seems unable to repair the installation.

  Then
  Second question: -.
  I tried to do a complete reinstallation from scratch, with the Windows CD - no problem. But then I need to install the drivers - got the support of Toshiba OK and I see the recovery disc has a whole bunch of the 'fix' but the June 10, 2006 forum thread "necessary driver after installation of Windows on TecraM2, gives the order of installation: no problem except that I cannot locate"Microsoft Windows XP Professional Step by Step Interactive"anywhere - I looked everywhere for it?

  Hi Ollienz,

  I'm a little confused about your Mr. ad you want to install Windows from Toshiba Recovery disk or normal drive of Microsoft? What do you do now?

  Theoretically, the recovery disk might be scratched so that installation can t be completed so successfully in your case, I would like to try a Microsoft Windows XP disk.

  I did a Google search for this Microsoft Windows XP Professional Step by Step Interactive and I found it s an update of safety for interactive training but it doesn t seem to be important for the driver installation:
  http://support.Microsoft.com/kb/898458

• Satellite L300 - product recovery disk hangs on step 2 of the installation program

  The product recovery disk will not work, it hangs on step 2 of the installation program.

  Help appreciated

  Hello

  Do you mean you cannot create the recovery disk or do you mean that you cannot complete the installation of recovery procedure?

  If you can not finish to create the recovery disk, then you must test different drives from different manufacturers. In most cases, this helps

  I m with Verbatim DVD-R

• Including the old versions of the runtime of the CVI in one installation program after the upgrade of CVI

  Hello

  I have a computer with CVI 2010SP1 that I recently installed CVI 2012 on.  I've noticed now that every time that I create an installer with CVI 2010SP1 which includes the runtime of the ICB, it's now, including the 2012 CVI runtime engine.  My guess is that this is because the installation program of the ICB 2012 updated modules of fusion in C:\Program Files\Fichiers communs\Merge Modules that it seems like the two versions of the CVI go when building their installers.  My first thought is to some how get a copy of the merge 2010SP1 CVI modules and manually add those to the installer.  Would this work, or there at - it an easier way, I'm missing?  Thank you.

  Hi tstanley,

  Unfortunately for this case as CVI 2010 was made before the install side-by-side feature, it is recommended that if you want to create an application that uses only the CVI 2010 Run Time you will have to downgrade of the CVI Run-Time installation of the development machine (which has some aspects to know as mentioned in the article) or have a separate computer that can be used to create the 2010 CVI based distributions.

• How to generate installation program

  Hello

  I have LabView 2014 and in existing building and installer of a vi.

  I met the attached mistake1. If I click on OK or build, he asks way multimedia (error2).

  I don't know what it means and how to proceed.

  Any help is appreciated

  Thank you

  To develop on the suggestion of GerdW, when you install the Toolbox items / with your LabVIEW installation, it does not include "Redistributable" part which is what gets grouped in the installation program.

  The first time you create a Setup program that uses a component (for example DAQmx), it will ask you the location of your installation media of NOR (DVD, network drive, etc.) so that it can copy the redistributable parts in your Setup program.

  In my view, there is an option that will "save in the local cache" so you can just do it the first time that include you each component.

• Error 0 x 80040201 event could not rely on any of the subscribers. The installation program will end now

  I get this error when you try to uninstall Creative Sound Blaster Audigy 2 ZS. Uninstall stops around 60%, then the error message (see post title), then Setup ends.

  I have now all sound and cannot take place.

  I looked online and there were a few messages mentioning reg fixes of corruption that had solved the problem. Recently, I installed a couple of mounting aps, so I thought that this feeling a bit made of new video. So I downloaded ccleaner v 3.05.1409 CNET, done a reg scan and set ONLY the entries that had to do with Creative, rebooted, but I still get the error if I try to modify, repair, or uninstall the Creative suite. (I don't have ccleaner difficulty all other entries) So the clean reg did not no diff.

  Now I can't install or uninstall.

  I am running XP SP3 all updates. Other than the sound, my system works perfectly.

  Help!

  Thank you!

  Mark

  Hello

  To resolve the above error message, follow the procedures below.

  a. close all open windows and programs.

  b. Click Start and then click Run. The Run dialog box is displayed.

  (c) as shown in this illustration, type MSCONFIG and click OK.

  d. the System Configuration utility appears. Click BOOT. INI, check the "/ SAFEBOOT" option, and then click OK.

  

  e. When you are prompted to restart the computer. Click on restart.

  f. the computer restarts in safe mode. (This may take several minutes, and its display will appear different from normal).

  g. mode safe mode, click Start, Control Panel, then add/remove programs. Select the programs you wish to uninstall, for example, Sound Blaster Audigy 2. Must uninstall successfully without error "the installer cannot invoke any of the subscribers.

  h. once the uninstall is complete, close the control panel and open windows explore.

  i. in Windows Explorer, click on TOOLS, then Folder Options. In Folder Options, click the view tab and choose the option view the hidden files and folders, under Advanced Options. Also, uncheck Hide extensions of the file types that you want to know. Click on apply, then OK.

  j. in Windows Explorer, navigate to the folder C:\Program Creative , while C: is the drive where the software is installed and remove subfolders associated with the software you are trying to uninstall. If you have a single creative hardware, you can remove the creative brief.

  j. in Windows Explorer, look for C:\Program InstallShield Installation Information------folder. In this folder, you will see strange named directories that contain information about the installation of the application and the material / uninstall information.

  

  To find which directories contain information on Creative products. Open a directory at a time and watch the installation. INI file. This file should open in Notepad.

  In the file, locate the AppName =, for example, the AppName =Creative MediaSource. If the installation program. INI contains information on the creative product you are trying to remove, remove the directory as the Setup program. INI has been found. Continue to go through all the directories and remove the most creative in the InstallShield Installation informationfolder n.

  k. after the creation of directories are deleted. Restart the computer in Normal mode. To do this, repeat steps 1 to 5, but in step 4, uncheck "/ SAFEBOOT"

  a. restart the computer and reinstall the application.

  Refer to this article for help:
  http://support.creative.com/kb/showarticle.aspx?url=http://Ask.Creative.com:80/SRVS/cgi-bin/WEBCGI.exe/,/?St=425,E=0000000001318352054,K=3345,SXI=5,Answer51608=obj(51608):obj(51637)

• I had a bad copy of XP, caught a virus, bought a new genuine copy of XP, now the installation program tells me that it cannot find my hard drive. any suggestions?

  I had a bad copy of XP, caught a virus, bought a new genuine copy of XP, now the installation program tells me that it cannot find my hard drive. any suggestions?

  You try to install through the Explorer windows, not good... Try to install

  XP CD, reboot the pc. At this point, the value of the BIOS pc boot xp cd (cdrom), defined as 1

  boot device, set the hd as the second, boot to a cd. On the menu of the xp cd, select "Install xp", remove

  the partition, create one, let xp format & install auto. It is a clean installation, also, once she

  housing starts, do not touch any keys or mouce until xp asks for the product key #...

  You can read about it here. http://TechNet.Microsoft.com/en-us/library/bb457062.aspx

• Why do I get a popup with Windows Installer when I open a program used with Explorer.

  Original title: pop-up Windows Installer

  Can anyone help with why I get a Windows Installer popup on opening a program used with Explorer.  Does not happen with Google Chrome.

  Hello

  1. is it that occur when you use internet Explorer?

  2. don't you make recent changes?

  I suggest you try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

• shortcut for deskjet 8600 pro has disappeared. Re-run the installation program does not help. How can I get that back?

  When I bought and installed my Pro Deskjet 8600 in last July, a wonderful control program has been installed. However, the shortcut on the desktop for this program has disappeared, and I can't. Re-run the installation program does not help. How can I get that back. All I have now is an older version of the HP Solution Center, which does not have the features that I got into the habit of.

  Hello

  Uninstall the software by following programs > HP > HP Officejet Pro 8600 > Uninstall.

  Then download and install the latest version of the software below, it is a more recent software and should solve the problem you are experiencing:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-3&cc=us&DLC=en&LC=en&OS=4131&product=4323659&sw_lang=

  Shlomi

• Reinstalling windows xp sp2 when I got an error that says that the installation program could not copy migregdb.ex_ from the cd.

  Setup cannot copy files?

  I did a reinstall of windows xp sp2 when I got an error that says that the installation program could not copy migregdb.ex_ from the cd. Please make sure the disk is in the e: drive and try again. I can locate the file and find no problem sound on the disc. Here is a list of the files that gave this same error.

  migregdb.ex_
  icwconn1.ex_
  ICWCONN2.ex_
  INETWIZ.ex_
  icwhelp.dl_
  icwutil.dl_
  icwrmind.ex_
  ICWDL.dl_
  icwx25a. COURIER
  icwx25b. COURIER
  icwx25c. COURIER
  ICWIP. COURIER
  Phone.ic_
  Phone.ve_
  State.ic_
  MSICW.is_
  MSN.is_
  support.ic_
  Msobshel.ht_
  ISIGNUP.ex_
  icwtutor.ex_
  icwres.dl_
  trialoc.dl_
  Oobeinfo.in_
  Oemlogo.gi_
  Mouse.ht_
  ISP.ht_
  Oempriv.ht_

  I know that the volume control does not work, and that the windows sounds are not listed, if you try to change the sounds on the system. As the noise of opening and closing session. The drive installed on a different hard disk on the same computer without error, it should not be dirty or damaged. If anyone can help with this please?

  JOEY

  To the file copy stage of the registry would be game.  It could be a permissions issue, you could mount the drive in a different Windows NT installation type and set the permissions.

  John