ESXi 4.1 error live migration

Similar Questions

• Live migration of HYPER-V Server R2 2012

  Hello

  I have a new Hyper-V 2 built node cluster. Storage is presented through SAN. Live-Migration network, network Public, private network and virtual switches-2 VMS-MGMT. These boxes are hardware identical; HP DL580 G7 with a lot of horses. I am running Windows Server 2012 R2 Datacenter Core on each node. My problem is, I validate cluster, and I get no error at all. This is a brand new clean install, but for some reason any I can only migrate from one node to another and not return without having to reboot a node after live migration. I don't know what I'm going? Has anyone already experienced this? A peer of mine installed the same scenario in a different data center and it does exactly the same thing too. Which leaves me to believe it's OS or hardware related?

  Any help will be greatly appreciated!

  Thank you!

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Error after migration of DPS (Woodwing)

  For the last three nights, I received this error when migrating publishes collections of old DPS (created with Woodwing). Someone else has the same error?

  The collection was not published.

  Publish failed. Please try again later. [pubs-5000]

  Select publish to try again.

  This is just a test, we still use the old DPS for production of. The next edition of morning is still Ok.

  

  After you publish the collection, he appears in products & subscriptions in the portal. But you cannot publish the collection because - I suspect - the Date of Publication of the migrated folio is set in the near future. I think that is why you can publish a collection migrated the next morning. Check the setting of the Date of Publication in your environment of Woodwing. Of course, I could be off the mark here, but it's a possibility.

• Error during migration of BLOB type data

  Hello
  
  I am migrating the data to oracle for oracle and tables soruce and targets have type BLOB field.
  
  I get the error when I will carry out the interface with these blob fields. But my interface is successful if I'm not maaping this blob files.
  
  Here is the error message.
  
  ODI-1217: Session BLOB (162501) fails with return code 942.
  ODI-1226: step BLOB fails after 1 attempt.
  ODI-1240: BLOB stream fails during a load operation. This goal of load flow chart IMAGES.
  ODI-1228: SrcSet0 (load) task fails on ORACLE YAGLD connection target.
  Caused by: java.sql.BatchUpdateException: ORA-00942: table or view does not exist
  
  Thank you
  Patel.

  Duplicate of
  Error during migration of BLOB type data

• Error "cannot migrate automatically.

  Hello

  I am trying to get into one of my hosts esx in maintenance mode but still get the same error, Maintenance Mode 'Enter' is stuck on 2%.

  In the "tasks and events", I see that there is always the same error "Cannot migrate automatically" on the same vm.

  I'm familiar with this error when a CD-ROM is connected or something like that, but this isn't the case.

  When I'm trying manual vmotion this virtual machine and it works fine, without error.

  My vSphere cluster is built from ESX 4 4 U1 servers that are set up to work with DRS and HA.

  DRS recommendation is to close 2 of my servers, so this probably isn't a performance problem.

  Any idea?

  TNX,

  Tal

  Hello

  Not sure if you are still having this problem, but the most common cause of this is that DRS in not "fully automated" value, so DRS is not able to automatically move virtual machines off the coast of the host to allow it to go to maintenance mode.

  I recommend that if you have the DRS in 'manual' or "partially automated" for a particular reason, then you must manually migrate the virtual machines on the host before trying to place it in maintenance mode.

  Hope this helps

  Adam

• Error during migration of business rules

  While trying to use the import/export option in environmental assessments to migrate business rules, we encountered an error.
  The export went very well. When you try to import, it says this: (even if it allows me to select the xml file suitable for import)
  Error during migration of business rules.
  Detail: The import file specified is not a valid trade rules xml file. Import ends.
  Details: Exception occurred. Please check your log file for more details.
  
  I'm sure I used the inherent format to export business rules.
  The old and new systems are version 11.1.2.
  
  The LCM method has failed also to the migration of business rules.
  Any suggetions?
  Thank you
  Elkaïm

  When you export make them sure you don't have "For Calc Mgr" checked, if you then import with failure.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• ESXi 4: error in live migration (VMotion) to the different data store (Local SATA to iSCSI SAN)

  Hi all

  I have a problem during VM migration live in the different data store, the specifications of the virtual machine is just Windows 2003 x 64 installed with the latest VMWare tools.

  Here is the error message:

  Move the virtual machine

  Win2003x64_RST01

  A general error occurred: detected Source this destination could not resume.

  The active state of VM migration

  any idea what could cause this please?

  Kind regards

  AWT

  Check that the machine ESX4 has prevention performance virtualization and data, indicators enabled in the BIOS. I could move 32 bit machines vmotion Unflagged VT turned on in the BIOS, but 64-bit machines could not begin until I activated the flag of VT in the BIOS.

  Also try to clear the mask of the source of the VM CPU before migrating, providing the hosts have the same hardware.

• Error creating migration of a V.M. in ESXi v3.50

  Hello guys!

  See the image as an attachment...

  I'm trying to migrate a V.M. an ESXi server... The image was created with VMware WorkStation v6.50

  Thanks for your help!

  could be a problem of shared storage... Make sure that your storage space is set up properly...

• Error when migrating from a virtual computer

  I received this error when you try to migration, a virtual machine on a remote server by using Windows Server '8' on both servers:

  PS C:\Users\Administrator > Move-VM-name OnTheMove - DestinationHost $RemoteServer
  Move-VM: virtual machines for 'OnTheMove' migration operation has failed to the migration source "SERVER-1950-01'.» (Virtual
  machine ID 172C44E1-E34B-4896-B450-B41CB037638D)
  The Virtual Machine Management Service could not establish a connection to a migration of virtual machines with the host
  'Server-1950-02': an existing connection was to be closed by the remote host. (0 x 80072746).
  Unable to send data to a migration of virtual machines: an existing connection was to be closed by the remote host.
  (0 x 80072746).
  On line: 1 char: 1
  + Move-VM-name OnTheMove - DestinationHost $RemoteServer
  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  + CategoryInfo: NotSpecified: (Microsoft.Hyper... VMMigrationTask:VMMigrationTask) [Move-VM], Virtualizat
  ionOperationFailedException
  + FullyQualifiedErrorId: OperationFailed, Microsoft.HyperV.PowerShell.Commands.MoveVMCommand

  Any ideas? Thank you.

  Hello

  I suggest you to ask your question at the following link.

  http://TechNet.Microsoft.com/en-us/ms772425

• Error during migration of 2003 standard to 2008 standard on the server.

  Original title: GIVE ME THE SOLUTION

  Dear Sir

  Actually am facing this type of migration of onece 2003 standard error to 2008 standard server.

  Kindly give me suggestion

  Adprep cannot run on this platform because it is not an Active Directory domain controller.
  [Status/consequence]
  Adprep has stopped without making changes.
  [User action]
  On an Active Directory domain controller, run Adprep.

  Thank you & best regards

  K. Raj Kleo

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will support what ask you

  http://TechNet.Microsoft.com/en-us/ms772425

   

  Hope this information is useful.

• Error "Live service is not available" when you try to play Windows Live

  Original title: when I started Tinker or Dawn of War 2, he asks my Windows Live username and password. So I enter, but then it says that the live service is unavaibable. What can I do to get it to connect?

  I downloaded Tinker on my other computer and I can connect to the Live service.  This computer is directly connected to my BTHomehub2.  My computer is wireless to the router.  I tried to open ports.  I can connect to the serviuce direct when im not in the game.

  Hi megasharp,

  See the following articles from Microsoft for troubleshooting connection problems:

   

  Games for Windows LIVE: Games for Windows LIVE to a game connection errors troubleshooting

   

  Games for Windows LIVE: you can not connect to LIVE and you receive an error message

  See also GFWL: Guide for the mistakes of general technique for Games for Windows - LIVE

  If the issue is not resolved, contact live customer support:

  Contact Games for Windows - LIVE customer

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Expression of the Groovy error after migration to 12.1.3.0.0 12.2.1.0.0

  I have a variable binding in a ViewCriteria, who worked at jdev12c (12.1.3.0.0).

  This variable has an expression like this:

  adf.object.applicationModule.parametros.get("NOMBRE_INFORME")
  

  When I upgrade to the new version 12.2.1.0.0. I get this error:

  groovy.lang.MissingPropertyException: No such property: applicationModule for class: oracle.jbo.common.VariableImpl$VariableExprValueSupplier
    at oracle.jbo.script.InternalSecurityPolicyEnforcer.checkProperty(InternalSecurityPolicyEnforcer.java:209)
    at oracle.jbo.script.InternalSecurityPolicyEnforcer.checkProperty(InternalSecurityPolicyEnforcer.java:179)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
    at java.lang.reflect.Method.invoke(Method.java:497)
    at org.codehaus.groovy.reflection.CachedMethod.invoke(CachedMethod.java:90)
    at groovy.lang.MetaMethod.doMethodInvoke(MetaMethod.java:324)
    at org.codehaus.groovy.runtime.callsite.StaticMetaMethodSite.invoke(StaticMetaMethodSite.java:43)
    at org.codehaus.groovy.runtime.callsite.StaticMetaMethodSite.call(StaticMetaMethodSite.java:88)
    at org.codehaus.groovy.runtime.callsite.CallSiteArray.defaultCall(CallSiteArray.java:45)
    at org.codehaus.groovy.runtime.callsite.AbstractCallSite.call(AbstractCallSite.java:108)
    at org.codehaus.groovy.runtime.callsite.AbstractCallSite.call(AbstractCallSite.java:124)
    at com_edisa_libra_informes_ejecutor_informes_model_adfbc_views_GiInfUsuariosGuardadosDefView_DynamicCodeSource.pTipoDespliegueInforme_expression_Variable(com_edisa_libra_informes_ejecutor_informes_model_adfbc_views_GiInfUsuariosGuardadosDefView_DynamicCodeSource.groovy:8)
  

  How can I get bindvariable ApplicationModule?

  JDeveloper 12.2.1.0.0

  Finally, the error was the transientExpression a attribute trustMode = "not reliable."

  Migration process modify this attribute to untrusted value sometimes. There's a bug in there.

• Classic report shows wrong "could not parse the SQL query: ORA-00942" error after migrating app to the new environment

  After migrating my APEX 4.1 application to a new environment, one classic report displays a "cannot parse the SQL query: ORA-00942: table or view does not exist" error when the page is displayed. Change the region to report SQL source to somehow (e.g., remove spaces, changing the order of the variables in the WHERE clause) immediately solves the problem, but by returning to the source of the region causes the report error again (the source region valid code without error, however).

  Throw the error message:

  Select v.id,

  v.Col1

  of view_vw v

  where (: P1_FILTER is null or)

  v.col2 = :P1_FILTER)

  Do not throw error:

  Select v.id,

  v.Col1

  of view_vw v

  where (:P1_FILTER is null or)

  v.col2 = :P1_FILTER)

  Changing the order of column in the report has the same effect; i.e. He arranges, but return back to the original column order causes the error to display.

  It's as if a cached result for the correct select statement used by the report is displayed. However, the application does not use the caching of page/region. Any ideas of what could be the cause?

  He solved. Ultimately, all that was necessary was to clear the DB cache using:

  alter system flush shared_pool;

• Compilation error after migration from 9i to 10g Jdev workspace

  Hello

  Nice day.

  We have a few custom pages OFA under EBS 11i developed using Jdeveloper 9i, now we migrate these EBS 12.2.4 page.

  After you open the old workspaces, the tool asked me to convert these packages to 10g, so I selected Yes.

  Now, when I try to compile the workspaces, I get the below error:

  Error(26,8): class oracle.jdbc.driver.OraclePreparedStatement is not public; cannot be accessed from outside of package package driver
  

  The original line of Java is:

  import oracle.jdbc.driver.OraclePreparedStatement;
  

  Help, please

  Thank you

  JTK1977,

  Your code should use the package oracle.jdbc instead of the package oracle.jdbc.driver used in earlier versions of Oracle. Using the package oracle.jdbc.driver is now deprecated, but will continue to be supported for backward compatibility.

  All that is needed to convert your code is to replace " oracle.jdbc.driver "by" oracle.jdbc " in the source and recompile. This can be done Isoquant. You must convert all classes and interfaces that are referenced by an application. Conversion is not required, but is highly recommended. Future releases of Oracle may have features that are not compatible with the use of the package oracle.jdbc.driver .

  See the link below:

  Oracle.JDBC (Oracle database JDBC Java API Reference)

  Change your declaration of import as below:

  import oracle.jdbc.OraclePreparedStatement;
  

  See you soon

  AJ

• Error after migrating APEX app to a different database instance

  Oracle EE 11 GR 2

  APEX 4.2.x

  ------------------------

  After the migration of an APEX application and underlying database objects into a new database, I get the following error (blackened my name of component specific to the application and the id for security reasons):

  

  In APEX, this error occurs when you try to run the application after logging in the workspace of the application.

  A specific to APEX table might be damaged or not migrated as it should have?  No tables starting with APEX were imported.

  No, these can be customized (self defined) so it's to the application developer.

  If you go to the request of the manufacturer and open the application and go to "shared components", then the "authorisation schemes' and open the schema with the name mentioned in your error message (behind" component name: ') you should see the authorization code that fails somehow. Search for the tables and the data mentioned in this piece of code.