11 flow: Flow 11 touchpad gestures works is not in Windows 10.

Similar Questions

• Touchpad gestures works do not on Samsung series 5 Ultra

  A few months, I bought my laptop and gestures multitouch touchpad worked just fine (scroll, zoom, etc.), but after one of the windows updates, they no longer work. Someone knows why?

  PS. I am running Windows 7

  Hi Zheel,

  First of all that I would say to go to Windows update history and check the obtained updates recently installed. Read the following article to know how to check it and let us know the number of KB updates.

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  I suggest you to update the touchpad drivers and check. Check out the following link to update the drivers.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  I suggest you to download and install the software updates available for the computer. It will install all the drivers updated on the computer. Here is the link for your reference. You'll find it under more downloads in the following link.

  http://www.Samsung.com/UK/support/model/NP540U3C-A01UK-downloads

  You can refer to the section [448891] Smart PC: my touch screen is abnormal behaviour and locks up for a few seconds, what can I do? of the following article for more information on the update of the driver.

  http://www.Samsung.com/UK/support/model/NP540U3C-A02UK-troubleshooting

  Reference:

  The problems with the removal of updates

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-removing-updates

  Let us know the State of the question, so that we can help you.

• TouchPad gestures works do not [Aspire V5]

  So I hope someone who works at Acer reads this. Or someone who is technically advanced.

  So, I first noticed the issue with sensitivity. The mouse is very sensitive. Then I noticed that the gestures do not work either. I can't scroll with the mouse. I went in deep and tried to understand the problem (but no solution).

  So I performed these steps:

  1. Changed the speed of the pointer for the fastest (I didn't like the speed of the slow pointer). The pointer was still quite slow.
  2. Has decided to modify the specific drivers for TouchPad. I go to the tab MOMENTUM under the mouse settings. I look and see that the 'Options' button is greyed out. I also noticed it says "Standard PS/2 Mouse.
  3. I decide to find the software to change the settings and it located in C:\Program Files\Elantech. I open ETDAniConf.exe and decide to do a test. I uncheck the click right left click and some other parameters of scroll. Nothing helps.
  4. Then I decided to uninstall it and install the drivers. Did. Nothing has changed. Modification of the wiretap, the scrolling options button does nothing. The mouse settings still shows as 'Standard PS/2 Mouse' even if the tab says MOMENTUM.
  5. I decided to make a big step and just reinstall Windows 8 altogether using Recovery of Acer. Reinstalled, still faced with the same problem. Always known as "Standard PS/2" mouse
  6. I try another way to try to solve the problem. I'm trying to find the similar driver more up-to-date. I find on that was much more recent (version 2013 rather than 08.2012). To install it, restart computer. Always without success. Always known as "Standard PS/2 Mouse.
  7. I decided to go the final round before asking the question here. I downloaded a copy of Windows 8 Pro from the Microsoft Web site and transferred the ISO in the bootable flash drive. I split the hard drive in a clean score (60 GB) and installed fresh Windows 8 Pro on it, without all the Acer drivers. Of couse I was missing the network drivers, so I had to go to my desktop to download the drivers online. I decided to first download the TouchPad drivers. Downloaded, copied to a Flash drive down them on the Acer laptop. Restarted the computer. Always face the question.

  So here I am at the moment. I had the laptop for a good discount of my work (as a bonus working there). It's a time discount. As you have noticed, I mentioned he was grateful as "Standard PS/2 Mouse. It's huge index that tells me that the drivers are really bugs. The problem here is that the TouchPad drivers are not recognized as if it were a touch pad, but as a mouse. A mouse that can just right click, left click.

  If someone is facing this problem or knows how to fix it, please help me.

  So I worked with a Microsoft Technical Support, and apparently the problem is on the side of the Acer. The automatically installed recovery partition the Elantech Drivers for the TouchPad and downloads Web site showed that the pilots Elantech. After some research, we found the Synaptics drivers on their official website and everything started working normally. Please, please, please, please fix this issue. I am frightened by the number of customers who will have to deal with this issue.

• Touchpad gestures works do not on laptop series 5

  I have a Samsung series 5 NP530U3C-A04AU, recently upgraded to windows 8 with drivers up to date yet my touch gestures (scroll, zoom, charms etc.) do not work. I tried refreshing and resetting windows 8, but the problem persists. Help, please

  I've updated my software of Samsung and drivers using the SW update and have now a touchpad works fully. It's great!

  I'm on the chat live on the site of Samsung and me the link to download from here the support person.  (Can't seem to find it through their site).
  Good luck!

• Touchpad gestures works do not correctly on Z510 with W8.1

  I think the problem is that if I go into settings / mouse and touchpad, it does not recognize that I have a touchpad of accuracy if I can't change anything. The important thing that is missing is edge by scanning and pinch of course etc.

  It used to work ok but suddenly doesn't have.

  Any suggestions?

  Problem solved. After having tried many suggestions, I finally fell the Windows troubleshooting tool and select 'system '. She finds that some hardware changes had gone not recognised and without 2 minutes the touchpad did not work properly. Thanks for your comments.

• Function keys not working do not after Windows 7 installation

  Function keys not working do not after Windows 7 installation. After I installed Windows 7 on a Sony VAIO laptop, the function (brightness, volume) keys stop working. is - anyone know how to fix this in windows 7? Thank you

  What can I do with this? I want to re install windows. ?

  Hello

  This thread offers you everything you need to install the right keyboard control drivers and utilities for your function keys working again:

  http://www.geek.com/forums/topic/Sony-VAIO-fn-keys-no-longer-work

  Don't forget to keep your model number of the laptop at hand for the page of the driver from the Sony site.

• Satellite L855 and Win8.1 - Touchpad stops working after the login window

  New laptop running windows 8.1 Touchpad works for about 30 seconds after windows starts and then stops. I have tried downloading drivers the most recent of the Toshiba site, but it does not solve the problem. Tried the function keys of the touchpad, but it's not the question. Called Toshiba support and they suggest to send it in for a factory reset.

  I have also a problem with AMD graphics will split after that computer screen goes into sleep state. Downloaded and installed drivers more recent for it on the advice of Tech support, but not fixed, or the other.

  I'm a little worried because a research shows these two problems are not uncommon and IV ' e spent a lot of time to copy data and install the software, don't want to lose him and wasting time waiting for factory reset if I need to return ot.

  Anyone have any ideas?

  Factory reset is the best way to solve this problem, but you have upgraded your machine following the instructions step by step http://www.toshiba.eu/innovation/generic/windows8_1-message/?

• Ss15 Touchpad stop working, do not show in the devices

  Touchpad appearing is not in the device, yes already tried Fn /F7 Manager, reinstalled fix driver: No... He is a recent problem, works very well with Windows 10.  I have read several posts on this topic. I think remember that unit must first discover the device (touchpad) and THEN you install the driver, or update the driver.  DOE this "Momentum" driver also update the driver of the "mouse"? The reason why I have ask when I go into the driver information for my mouse, it shows today's date.  My mouse is logitech USB wireless.

  I'm just not used to have a device simply disappear from the Device Manager! any ideas?

  Thanks in advance for any help!

  Ron

  Click the driver. This is Logitech, MS, or momentum.

  Go to Control Panel / programs and features/view installed updates and see if the Logitech

  a updated Windows Update.If Yes, that was the missing touchpad?

• Camera work is not on Windows 10

  Hi, after installing Windows 10 on some PCs, I have no access to the camera on them in Skype. If I open the camera app, it works and not exceeding not black comes from the camera when using Skype

  I can see the camera as in the forecast program of Skype and Skype on the WEB. If you check on permisions them privacy camera on Windows, Skype is not in and overview of Skype is here

• Satellite A300 - FN key doesn't work is not in Windows 7

  I just upgraded my laptop Windows 7 64 bit.
  Since I upgraded the keys FN "F1 - F12" did not work, light on the keyboard lights up when I press the 'FN' key so the button seems to work and the front NATIONAL arow and keys still work but not the keys "F1 - F12.

  Anyone know how to fix this?

  Hello

  Have you installed the package of value added?
  If this isn't it!

  In addition, you should check if the Flash from Toshiba card utility is enabled/activated.
  You can check this in Programs\Toshiba\ Flash Card Utility

  Check it!

• Theme Hospital, set of 16 bits works is not on Windows 7 64 bit

  coupl'a day there, I tried inttalling one of my favorite games ever hospital theme but is a set of 16 bits and I have a 64 bit system could there be an update for win 7 64-bit to fix this quite annoying version of windows or not?

  PS just wonderin

  You cannot run 16-bit applications on a 64-bit system. Try dosbox (www.dosbox.com), a program of emulator BACK (32-bit = works on x 64), version 0.73 is compatible with Theme Hospital (1997).

  There is nothing to blame "this quite annoying version of windows. Some older programs require direct access to material which is prohibited on modern systems, some require drivers that do not work on 64-bit. Backward compatibility to the stone age could be achieved with a lot of programming but no 64-bit OS do that (not just Windows), because the affected applications are too few and mostly out of use.

• Microphone doesn't work is not in Windows 7

  my sounds work but microphone doesn't work on my win 7, I have a driver realtek hd audio, please give me solution, please...

  Hello

  What application you use to record microphone?

  Method 1: Run the troubleshooter and check if the problem is solved or not.

  Open the troubleshooting of Audio recording

  Method 2 : perform the steps in the article and see if the problem is resolved or not.

  Adjust the microphone volume

  Method 3 : record the sound of the sound recorder and see if it works or not.

  Record audio with Sound Recorder

  Hope that helps.

• Special character key and keys doesn't work is not in Windows 8

  Original title: just installed win8.  more funny - number and @ sign willnot work trying to reset my pw etc but works fine on my applications. can u solve this problem?

  Installed Win 8 and now numbers and symbols do not work when I try to change my pw or make changes to my account MSFT. BUT they all work very well in all my applications like Word, Outlook, etc. I have a HP laptop dv7. Is there a solution?   It is ironic that I have to use the sign @ to try to get help from MSFT because that's exactly the problem - I can't get the @ sign in my account with them when

  Hi Richard,
  
  Welcome to the Microsoft community.
   
  It resembles that of the number keys and @ key will not work after you install Windows 8. I understand that this can be embarrassing.
  
  You can follow these steps to search for a program called detector of key journal constant guard or the constant guard of Comcast.
  
  (a) press "Windows +R" and then type "appwiz.cpl" and press ENTER.
  (b) locate the program constant guard here.
  (c) make a right click on it and select Uninstall.
  (d) to restart your computer.
  
  It will be useful. Feel free to get back to us if you have any other questions.

• Headset microphones Ozone Attack works is not in Windows 8.

  Original title: external microphone does not work do not

  My external microphone does not work correctly.

  OS: Windows 8 pro

  Computer: Dell Inspiron 15R SE N7520

  Helmet: Ozone Attack

  Troubleshooting methods performed so far:

  Tested the microphone on another computer works perfectly.

  Uninstalled and reinstalled the sound drivers.

  When I plugged another headphone microphone worked. It made me check again the previous helmet on another computer and sound can be heard some time while talking.

  Although there is no driver problem, I realized that the problem was with helmet, where the lead wire for a wire has been broken.

  My apologies for the inconvenience.

• HP LaserJet CP1025nw: HP LaserJet CP1025nw color work is not with windows 10

  I have recently upgraded to windows 7 to 10 on a single computer, purchased another and the 3rd was Windows 10 all year that we had.  I have a LaserJet CP1025nw which worked fine until the last few weeks.  The new computer, it is not recognized to install, one that was just upgraded, it is still listed, but it's not working and the laptop which was windows 10, it is printed in the last month, now, without modification, only an update of windows, the printer disappeared and will not re - install.  Attach the USB cord is not working and I checked on the HP site, for more than 5 hours looking for a solution, and even if it is supposed to be updated drivers to download, when I download them, the file for the 1025 installs the drivers for the 1020.  Nothing works and I'm at my wits end.  The printer is not that old, and I have several refills that I would use because I do not use the printer much at all.  Tips for good drivers would be very much appreciated.

  @Tanster , welcome to the Forums of HP, it's a great place to get help, find answers and advice.
  Thanks for posting your request, I'll be more than happy to help you.

  I understand that your HP LaserJet Pro CP1025nw color printer does not work after upgrade to Windows OS 10.

  Don't worry because I have a few steps that should help you to solve this problem.
   
  And here's the step by step guide for you in the links below:
   
  1. update the Firmware on the printer

  2. using your printer with Windows 10
   
  Let me know how it works.
  I wish you a good day ahead.