ESXi 5.1 build 2000251 - unexpected host to start/stop

Similar Questions

• HELP: Module does not not in ESXi 5.1U1 build-1157734 / Cisco C240 M3 / NVIDIA K2 GRID 304.76

  I started a business of pension on it with VMware, but I thought I could put in place here to document the process of solving it more publicly.

  Cisco C240 M3 Server (System BIOS 1.5.3b fw version)

  Card NVIDIA K2 GRID (shipped with the server)

  VMware ESXi 5.1U1 build 1157734

  I installed the last VIB for 2 m from NVIDIA (304.76) GRID, and it installs without problem:

  ~ List of the vib # esxcli software | grep NVIDIA

  NVIDIA-NVIDIA 304, 76 - 1OEM.510.0.0.802205 of VMware_ESXi_5.1_Host_Driver VMwareAccepted 2013-09-27

  but then I try to verify installation:

  ~ # nvidia-smi

  NVIDIA: could not open the file of the device/dev/nvidiactl (no such file or directory).

  NVIDIA-SMI has failed because he could not communicate with the NVIDIA driver. Make sure that this latest NVIDIA driver is installed and running.

  Try to load the kernel module and get this:

  ~ esxcli system #.
  module - NVidia module loading

  Could not load the module/usr/lib/vmware/vmkmod/nvidia: failure

  ~ tail #-10
  /var/log/VMkernel.log

  (2013 09-27 T 02: 13:15.618Z cpu7:21007) bunch of module: initial heap size: 8388608, max heap size: 68476928

  (2013 09-27 T 02: 13:15.618Z cpu7:21007) vmklnx_module_mempool_init: Mempool max 68476928 used for the module: 75

  (2013 09-27 T 02: 13:15.618Z cpu7:21007) vmk_MemPoolCreate passed for 2048 pages

  (2013 09-27 T 02: 13:15.618Z cpu7:21007) bunch of module: using memType 2

  (2013 09-27 T 02: 13:15.618Z cpu7:21007) vmklnx_nvidia bunch of module: creation succeeded. ID = 0 x 410043000000

  NVRM: No found NVIDIA graphics card!

  (2013 09-27 T 02: 13:15.618Z cpu7:21007) nvidia could not load.

  (2013 09-27 T 02: 13:15.618Z cpu7:21007) WARNING: Elf: 2767: Kernel based the nvidia module load failed: failed < Mod_LoadDone is not >

  So I'm stuck.

  I get this error when you try to turn on a Windows 7 guest who has the added PCI device.

  

  It is configured on the host computer, but things are not quite right...

  

  anyone else facing the pleasure like this?

  -wes

  Of course, I have it works very well, but with a Quadro2k and a Quadro4k.

  Take a look in this whitepaper for instructions, be aware that it is not fully supported yet and you might have to tinker a bit to make it work.

  http://www.VMware.com/files/PDF/Techpaper/VMware-horizon-view-graphics-acceleration-deployment.PDF

• Cannot upgrade to ESXi 4 Update 1 via vSphere Host Update Utility 4.0

  Hello

  can someone tell me why I can't update ESXi 4.0.0 build 219382 to ESXi 4 Update 1 via vSphere Host Update Utility 4.0? The doesn´t utility see the update.

  The problem is, I can't download the update on http://downloads.VMware.com/d/info/datacenter_downloads/vmware_vsphere_4/4 because I always get the error

  "I'm sorry, at the moment you are not allowed to download VMware ESXi 4.

  Update 1 Installable.

  You have the following options:

  "

  How can I get the update or the update with the host update utility?

  I already have an activated ESXi 4.0 license!

  219382 is the latest version. You already update 1.

• Upgrade to ESXi 4.0 Build - 398348 to ESXi 4.1

  Hello

  Currently all my servers ESXi 4.0 build 398348. vCenter server 4.1.0 Build 258902.  I also installed on my Update Manager vCenter.  What is the best way to upgrade to ESXi 4.1.  I'm new on this you can give me some instructions.

  So I've upgraded to the latest version to 4.0 before going to the 4.1?

  Thank you.

  You can directly upgrade to ESXi 4.1 using AUVS

  Check KB1022140 for differernt upgrade methods

• Cannot customize esxi 4.1 build 348481 u1

  I installed esxi 4.1 build on a dell t3500 348481 u1. Installed everything fine. I can access my esx vsphere client on the network. I want to change the name of the server and add another network card. I have restart my esx server and wait until it is completely. Gray screen that indicates the ip address and other. I do not see the "hit F2 to customize." The previous version of esxi 4.1 had this. Am I missing something?

  Welcome to the community,

  can you confirm that you look at the yellow/grey screen? Please press ALT - F2 to see if that changes anything. If not, post a picture of the screen.

  André

• ESXi host refusing to stop/restart (the VI client or ssh), if not in maintenance mode

  Hello

  I'm working on a (free) version without updating ESXi 4 license

  In the unsuppoprted ssh using and scripts of J.Holland I'm programming without supervision of emergency stop (with UPS APC and apcupsd linking VIMA)

  I'm trying the script step by step: after stopping all running vms (with & lt; code & gt; vmsvc/power.shutdown vim - cmd) & lt; / code & gt; I needed to stop graciously host Esxi (a dell PE 2950)

  so I did:

  ~ # /sbin/shutdown.sh
  Stop running from sfcbd-watchdog
  Stop Sfcbd
  Stop wsmand running
  Stop Openwsmand
  Guard-openwsmand dog: watchdog terminal with PID 1557
  Stop sfcbd running
  This operation is not supported.
  Please use start /etc/init.d/sfcbd-watchdog
  Stop slpd
  Stopping slpd
  Stop to spend running
  Watchdog - pass: Terminal watchdog with PID 1475
  Stop running ntpd
  Ntpd stop
  config loaded implicitly
  Saving the current state in /bootbank
  Clock day.
  Time: 09:22:18 Date: 2009-05-20 UTC

  and then:

  ~ #/ sbin/poweroff
  poweroff: No.

  Why the host refuses to stop?

  Thank you

  Guido

  What is the tail after the virtual machine is stopped and then by running poweroff?  No maintenance mode, but any running virtual machine?

  -KjB

  VMware vExpert

• Firefox build 17.0a2 when you start to customize, FF crashes

  17.0a2 build Firefox hangs when you start to customize

  It's the build directly from

  http://Mozilla.debian.NET/ experimental iceweasel-aurora, I'm doing a daily distribution update, when there is a change in the pension, I get it.

  I went into safe mode and the problem was not there. I returned in mode normal and disabled all my Add ons. I restarted each one (with FF) and seemed to have eliminated the problem.

  I can't have his failure...

  Thanks for your help

• Satellite L500D-144 - CCC of the host Application has stopped working

  Ladies and gentlemen,

  My PSLT6E - 007004GR is almost a year.
  This month, there was an update - possibly to leave Microsoft - and since then popt always at startup in Windows 7 this window and look for solutions:
  Catalyst Control Center. The host Application has stopped working, it is looking for a solution.

  A new installation of the driver graphics card and Catalyst Control Center has not changed. Instead, a standard Microsoft graphics card driver is installed.
  Reset of the system for the month of October has also asked nothing, after fresh updates, the problem recurs.
  Is it reproducible.

  Have already reported more customers or I'm the first?

  What can you do to the problem?

  Sincerely,

  CBluebaerchen

  Hello

  > Reset of the system for the month of October has also asked nothing, after fresh updates, the problem recurs.
  To do this the display of Windows Update driver update?

  If so, restore the system to an earlier point and disable this update of the display driver and choose only the updates of Windows. That s enough.

  Otherwise, you can try running CCleaner. It can clean and fix registry problems.

• Want to m6: Catalyst Control Centre: host application has stopped working

  Whenever I start my computer, I get the following message every time that a few months:

  "Catalyst Control Centre: host application has stopped working".

  A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  Please how can I get rid of this or get whatever the problem is solved?

  Thank you.

  Hello

  Try to use Recovery Manager to reinstall your original graphic AMD software package - the procedure to use the Recovery Manager to reinstall the drivers and software is detailed in the document in question on the link below.

  Recovery Manager - Windows 8.

  Recovery Manager - Windows 7

  After reinstalling, restart the laptop.

  Kind regards

  DP - K

• Issue of satellite A300 Catalyst Control Centre - host application has stopped working

  At startup, and whenever I try to open the Catalyst Control Center, Windows displays the error message ' Catalyst Control Centre: host application has stopped working ".

  Has anyone else with similar problems.
  I tried to reinstall the drivers on the toshiba site, and install the new drivers on the ATI site and all I could think about. Given that the two pilots do not work im not able to exceed the resolution 1024 x 768.

  Any suggestions?

  Hello

  I googled for this error message and found many people having this problem.
  It s not related to the laptop, but for the driver
  Who knows why.

  In any case, in most cases the people solved this problem by the new driver Catalyst installation.
  You should do this;

  -upgrade your Vista to the last State
  -remove the old system catalyst
  remove/uninstall the graphics since the device manager driver
  -Restart the computer and reinstall the driver and catalyst

  Should work!

• Why my Catalyst Center: the host application has stopped working?

  When I log on my computer, a window opens in two separate occasions stating that Catalyst Center: the host application has stopped working... How can this be repaired?

  Hi Missy,

  This probably isn't a problem MSE or malware.  It could be a problem with the video software (which is otherwise commonly) and I have it on my system as well for my ATI graphics card.

  This just started recently - as the last day or more?  If so, try a system restore to before it started to see if that helps. If you use Windows 7, seehttp://www.sevenforums.com/tutorials/700-system-restore.html. If you are using Vista, seehttp://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. If you are using XP, seehttp://support.microsoft.com/kb/306084. Sometimes this simple process made the rounds and sometimes that doesn't help - but it is easy and worth if she has recently begun.

  Good luck!

  Kosh

• Catalyst Control Center host Application has stopped working

  I get this promt twice when I start the computer. I tried something that has been recommended who was clicking on tools in CCleaner and see if it was on the list that he was. I deleted it then as recommended but the guests still appear.

  Check these related discussions

  Catalyst Control Centre: host application has stopped working - Windows 7 Pro
  Catalyst Control Centre: host application has stopped working disk failure / hard
  Catalyst Control Centre: host application has stopped working
  Catalyst Control Centre: host application has stopped working
  Catalyst Control Center has stopped working: the Application host

• Catalyst Control Centre: host application has stopped working Windows xp prefessional

  Catalyst Control Centre: host application has stopped working Windows xp prefessional. ididnt get what do that means.

  Catalyst Control Center is a Radeon video card component. I recommend that you go into Add/Remove programs and uninstall. Once you have uninstalled it click HERE to download and enable the parser should automatically detect and install the appropriate driver. If the installation of the latest version does not resolve the problem, you should scan your computer for malware using Malwarebytes. Make sure that you update the parser prior to analysis.

• using win vista sp2 64-bit overpriced home, the catalyst control center host application has stopped working

  Using windows VISTA Home overcharging sp2 64-bit, the catalyst control center host application has stopped working

  Hello

  You will need to download the correct drivers for the graphics card. You can also contact the manufacturer for assistance on this issue.

  Support for drivers &

  http://support.AMD.com/us/pages/AMDSupportHub.aspx

• Catalyst Control Centre: host application has stopped working

  What does the error message ' Catalyst Control Centre: host application has stopped working "means and how to fix it?

  Maybe it's the solution you're looking for.

  Recently, I removed the malware recovery Vista of another of our mobile phones of the company Center. It installed ATI graphics card. This malware cache most of the files on the PC to try to trick into thinking that your PC is really damaged as he reports. Remove malware does not cancel the hidden aspects. In Vista, the folder of' your profile name (usually the owner) " c:\Users\ contains the subdirectory AppData required by the Catalyst Control Center to access in order to operate. If this directory is hidden, CCC cannot locate the files needed to launch. To resolve this problem, I use the following steps.

  Go to c:\ and right-click on the users. Select Properties. On the general tab, look down to the hidden selection. If not, there is a box to tick in the box, place a check mark. Hit apply, select Yes to apply to all subdirectories. If you click ok, you may notice that he disappeared in the pane on the right, once it ends. It should always appear in the tree view on the left. Right click on it again. This time, remove the check mark and apply to all subdirectories. Once it's over, your files in the Users directory should reappear and Catalyst Control Center should function normally again. It worked in all cases that I have hitherto encounterd. I hope this works for you as well...