Support for Windows 2008 R2 in vCenter Server 2.5 U4 and 4.0
I'll have no problem creating models in both versions of vCenter Server. The question arises when you try to deploy the model to the Customization Wizard help. Under 4.0, it immediately comes up as not supported (7 64 windows server). Minus 2.5 U4, there is no tag for Windows 2008 R2 OS.
Support for this OS will be released in a next update on both vCenter servers (specifically the Customization Wizard)?
Windows 7 and Windows 2008 R2 is not supported with vSphere yet but experimental and should be supported subsequently released but they're working on it. You can run the wizard of customization with Windows 2008 however, here's how the instructions http://vinf.net/2009/07/09/how-to-deploy-a-windows-2008-server-from-a-template-with-vsphere/
If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!
Kind regards
Stefan Nguyen
VMware vExpert 2009
iGeek Systems Inc.
VMware, Citrix, Microsoft Consultant
Tags: VMware
Similar Questions
-
Is - this support for Windows 2008 server
Here is, it supports to windows server 2008.
Here is, it supports to windows server 2008.
Hello
Server forums are on the Technet forums. Here is a link to the home page.
Category of the Windows Server:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServerI hope this helps.
Kind regards.
-
Support for Windows 2008 R2 Reporting Services 2000
Hello
We can install Reporting Services 2000 on Windows 2008 R2 Server?, since our reports in RS 2000 and we are planning for the upgrade of the reports, then can we install RS 2000 on windows 2008 R2 Server?
Thank you
Chebli
Please repost your request in a more appropriate in Forum Windows Servers. Thank you!
-
Based on the VMware compatibility page, I can see that Windows Server 2008 R2 is supported, but when I configure the "guest operating system" I see the BONES being listed as: "Microsoft Windows Server 2008 R2 (64-bit) (experimental). Is this correct? We're not 4.0.0 build 208167 who I think is the latest version. Thank you.
update your vCenter to U1, which will probably fix the problem
-
Support for Windows 2008 on ESX 3.5 update 4?
HEY, it's the update of windows server 2008 is supported by Vmware on ESX 3.5, 4 and VC 2.5 uipdate 4?
Thank you
Click here for an official response
http://www.VMware.com/resources/compatibility/search
Host/guest OS tab
http://www.VMware.com/resources/compatibility/tmp/VMware_OS_Compatibility_Guide-partial-4.PDF
-
Support for Windows x 64 on VMware Server 2.02 comments
My VMware host is Windows Server 2003 Enterprise x 64 Edition. I installed VMware Server 2.02. When I tried to create an OS 64 - bit Windows Server 2003 comments, I got the error message:
Attempting to load an x 64 operating system, however this CPU is not compatible with x 64 mode. Please install a 32-bit operating system.
I was wondering if anyone had this problem before and how to solve it.
Thank you
Hello
You can also check this: http://communities.vmware.com/docs/DOC-8978
Maybe help you.
Best wishes / Saludos.
Pablo
Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. MUCHAS gracias!
-
VCB is supported on Windows 2008 64-bit.
VCB 1.5 is supported for Windows 2008 64 Bit edition. I was not able to find any documentation. Running ESX 3.5U3 and VC 2.5
Thank you
Experimental, I think:
http://www.VMware.com/support/VI3/doc/vi3_vcb15_rel_notes.html
Duncan
VMware communities user moderator | VCP | VCDX
-
-
What NIC for Windows 2008? E1000 or VMXNET 3?
In ESXi 4, Windows 2008 SMV seem to want the E1000 NIC model by default when you create a new. However, after reading the KB on this (http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1001805), is seems the 3 new VMXNET is supported for Windows 2008 (and Windows 2003 for that matter).
So, what is the best to use? It seems the VMXNET it the best choice because it has all the latest bells and whistles - but sometimes it's a bad thing also. The KB does not really say what to use, but rather what options are available... unless I forgot.
Any advice?
SB
WARNING: I have worked directly on Vmxnet3, so I'm probably biased.
I advise to use Vmxnet3. More than a simple saw the latest bells and whistles, his overhead is also smaller than e1000 (and therefore its performance are better) and perennial is that further improvements to virtualization will apply permanently above this one. The device was tested intensively for months and the drivers that we provide are of high quality.
I understand the reluctance to use a completely new device, but you will not be disappointed if you give it a try.
-
10.2.0.4 patch for Windows 2008 server enterprise edition
Dear all,
We anticipate an Upgarde to our database located on 10.2.0.4 Server 2003 32-bit Windows on 64-bit Windows 2008 Enterprise Edition.
For which I downloaded 10gr 2 for Windows 2008 R2 64-bit software of http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
Now, I want to download the Patch for 64-bit Windows 2008 10.2.0.4, I'm getting confused because there because when I select Windows 64 bit Option in the menu of the platform, a lot of results is appreing
Ex: as illustrated below:
The appropriate fix ID or a link would be appreciated12687754 Oracle Database Family: Patch PSE FOR MLR BUG 12664418 ON TOP OF 11.1.0.7.0 FOR GENERIC RDBMS 10.2.0.4 17-FEB-2012 795K 12319379 Oracle Database Family: Patch MERGE REQUEST ON TOP OF 10.2.0.4.0 FOR BUGS 10178675 10195109 10.2.0.4 09-FEB-2012 521K 11874181 Oracle Database Family: Patch MERGE REQUEST ON TOP OF 10.2.0.4.0 FOR BUGS 5184462 8730627 10178675 10195109 10.2.0.4 09-FEB-2012 522K 12914910 Oracle Database Family: Patch ORACLE 10G 10.2.0.4 PATCH 47 BUG FOR WINDOWS (X64) AMD PLATFORM 10.2.0.4 21-OCT-2011 111M 8685215 Oracle Database Family: Patch XSL:SORT GIVES WRONG ORDER BETWEEN ALPHA AND NUMERIC STRINGS 10.2.0.4 04-OCT-2011 13K 12340457 Oracle Database Family: Patch MERGE REQUEST ON TOP OF 10.2.0.4.0 FOR BUGS 6460304 10195109 10.2.0.4 18-AUG-2011 472K 12429521 Oracle Database Family: Patch ORACLE 10G 10.2.0.4 PATCH 45 BUG FOR WINDOWS (X64) AMD PLATFORM 10.2.0.4 29-JUN-2011 111M 8968255 Oracle Database Family: Patch DATAPUMP IMPORT FAILED TO IMPORT INDES STATS ORA-39083 AND ORA-01821 RAISED 10.2.0.4 22-JUN-2011 13K 10649822 Oracle Database Family: Patch EXPDP HANGS WHEN USING EXCLUDE CLAUSE WITH DICTIONARY QUERY 10.2.0.4 21-JUN-2011 110K 12674142 Oracle Database Family: Patch MERGE REQUEST ON TOP OF 10.2.0.4.0 FOR BUGS 6156708 6269507 7722575 10.2.0.4 21-JUN-2011 166K 10357961 Oracle Database Family: Patch GV$SYSTEM_FIX_CONTROL SYNONYM DEFINED IN WRONG WAY 10.2.0.4 07-JUN-2011 107K 9437010 Oracle Database Family: Patch QUERIES ON X$KGLOB TAKING LONG TIME 10.2.0.4 12-MAY-2011 45K 4860137 Oracle Database Family: Patch ELIMINATE THE RANGE RESTRICTION OF WILDCARD_MAXTERMS 10.2.0.4 01-MAY-2011 10K 9360328 Oracle Database Family: Patch ORA-12012: ERROR ON AUTO EXECUTE OF JOB 8950~ORA-06532: SUBSCRIPT OUTSIDE OF LIM 10.2.0.4 29-APR-2011 56K 10243235 Oracle Database Family: Patch CPU Bug 10.2.0.4 14-APR-2011 57K 12328503 Oracle Database Family: Patch ORACLE 10G 10.2.0.4 PATCH 44 BUG FOR WINDOWS (X64) AMD PLATFORM 10.2.0.4 09-APR-2011 111M 11068025 Oracle Database Family: Patch DBMS_REDEFINITION.COPY_TABLE_DEPENDENTS FAILS WITH ORA-936 WHEN USING NAMED LOBS 10.2.0.4 07-APR-2011 19K 11731126 Oracle Database Family: Patch ORACLE 10G 10.2.0.4 PATCH 43 BUG FOR WINDOWS (X64) AMD PLATFORM 10.2.0.4 17-MAR-2011 110M 6641104 Oracle Database Family: Patch FLASHBACK_SCN DOESN'T WORK WHEN USING SYSDATE 10.2.0.4 16-MAR-2011 99K 10195109 Oracle Database Family: Patch ORA-4030 DURING DATAPUMP METADATA EXPORT 10.2.0.4 11-MAR-2011 468K
Thanks in advanceSalvation;
No, the patch is 6810189. Please see:
Quick reference to group of patches Patch [753736.1 ID] numbersRespect of
HELIOS -
I allredy backup data, how to restore backup of key USB for windows 2008 r2 standard?
I allredy backup data, how to restore backup of key USB for windows 2008 r2 standard?
Hello
The question you posted would be better suited in the TechNet Forums. I suggest you to send your query to the TechNet forum for better support.
-
Last week, and now on the longest phone conversation with me this morning, Mon, 22/07/13, phone swindler wants to CHECK the ID NUMBER OF YOUR COMPUTER. A 3rd call repeat 'husband' today, from "Steve Matthew," of "Zircon systems", where the staff is all "Microsoft Certified technicians". Said our PC has been disconnected from the server "universal routing" and needed to check the identification number. Said computer infected and disengaged, errors with malicious files. That 50% of Microsoft applications does not. Finally, after several questions polite but stupid me, as if to say but our computer works OK? the appellant was told that he is temporarily hung up a temporary server! but it must be reconnected... After having his name and telephone number - strongly Indian accented man "Steve Matthew" on the phone # 408-498-3608, and have patiently give me the 888DCA60 etc etc 32 numbers, he indicated that he understood my being suspicious, but it is a Microsoft Certified tech, calling for Windows, have we not Windows 7 or XP or Windows 8, etc.? And he said I could not find the computer ID number easily, it wasn't on our guaranteed purchase paperwork, etc, that I would need to go online with him, to find our location.
Knowing that registrations for computers, go directly to the manufacturer only if you send the information on your purchase, and that no known iin manufacturer sends the modern world 'Oops, you're disconnected' phone calls, it seemed a bit of fun to keep to provide information...
So I explained to Mr. Steve, when he repeated for the 4th time that it has been certified Microsoft Tech and trustworthy and kept warning me that our computer would break soon, that, by analogy, certified Subaru Techncians had simply taken a few classes to automotive Subaru training and were not necessarily qualified or guaranteed to work on my car the certification does not matter, you should still consult your dealer, the garage, make sure it's good reputation. Then, I asked him directly, so, on a phone call from me, a total unknown, he would be willing to send me or transfer to me $2 000,00. He actually misses, in dismay. So I repeated it-$ 2,000, say, in US dollars, would it send it to me, if I had called and told him his bank account had been disconnected from his bank, and I needed to reconnect it? He ate and asked me ' you mean $2,000! $? ' so I said yes, would he give me or transfer to me on this amount, based on a phone call? He said absolutely not. End of quote. I told him how we would check with some type IT geek friends we know, took his phone, name and said I would be back to him and please DON'T NOT CALL BACK IN AN HOUR, BUT PUT us WE HIS DO NOT CALL LIST.
At this point, I googled Zircon systems - and there is no such American society less than a jeweler or invest co. in Illinois), although I had a systems Zicom in India, which seems to be the sale of legitimate & electronic security systems and then I googled the identification number, find some great ads about what happen and asks what will be PayPal scam, if one agrees with the appellant and goes online and follow their directions.
(See mutation 2012 of a David Jacoby to http://www.securelist.com/en/blog/208193750/ , who described a telephone scam quite similar, with the technical information, copy requested screens, orders). Maybe giving a technical support genuine or scam to support people on your side, an idea of what was going on my caller to walk me through, if I had fallen for the Universal Server disconnected claim it does?
Hope this helps to update your information, files.
In any case, this is my first time ever having reported a telephone scam. Thought it would do, seems since then I received a call from update and more sophisticated scam. My husband simply hung up on the caller last week - he knows little re our PC, I ask more tech-savvy people to help if necessary. But then, the scammer called back, too. If something had to be done to put an end to the process?
Don't forget, if you get that kind of call, simply ask the crook to trust YOU, say that you are a certified technician to bankruptcy with years of training from the IRS. Ask if he is personally prepared to transfer $2 000,00 to you (via Paypal, do not give your bank account to him for any potential future direct deposit!), but preferably by cheque of... And it must be sent to the address of your worst enemy in life, as you need the alimony to a former spouse. Or to a mailbox in a different city than your... And then tell him you'll telephone him with the identification number of your computer, once you have verified that the money is in hand.
Done politely, in a pleasant soft voice, you would be surprised how unprepared the scammer or snow must be befriended as a simple employee, but itself for you send funds then asked? I'm looking seriously for the money from them here - I'm not asking in fact send me $2,000, but I said that I was trying to explain by analogy, with auto - trained technicians and requests for money, why I wanted to check with the best-known people before giving identification numbers. Analogies, it seems well understand what we hear - an example? I just him speechless when I wanted a large amount of course him sent me instead...
Uh, Mr. Steve Matthew, Zircon systems, technical support for Windows company, also clearly didn't "want to send me a few thousand, and he hung up, after I suggested that he does not call again, asked him to put us on the list of subscribers do not call... Clearly a new variant, although, in the wick on the Microsoft Certified Tech claims, the name of Zircon systems company and so I thought after that.
Hello
I had a similar call from Indian women (?) strongly accented called 'Janet' of 'Zedconnsystems', based in Floria, USA. She had called asking to speak with my roommate to tell her at the computer (which is mine) showed the error messages. She shook off the usual garbage and was unable to answer most of the questions I asked, but gave his phone number as 4084983608.
As far as scams go this one seems rather transparent, but mention on the off chance someone saves a load of hassle!
-
support for Windows xpsp3
Mozilla has not announced a given as to when support for WinXp SP3 will end.
-
Support for Windows 10 in Qosmio X 70 - has
Hello
I have a X 70-a, and according to the plan of Toshiba support, full support for Windows 10 only will be available January 31, 2016 ('coz that's what you get when you pay 1500-2000 euros for a cell phone, right?)
Any who tried to win 10 on a similar laptop? Personally, I don't see what is the hold up and do not understand why they need half a year to offer support because most of the drivers Windows 8.1 should be available (assuming that they were well written in the first place).
"That's what I get for a laptop of 1,500 euros" is exactly what I had in mind when searching for this Web site in order to get my windows 10 drivers only to find out that I am not on the priority of Toshiba.
Keep the windows 10 update has an option to restore your old windows for a month (available in recovery at startup menu), I took the plunge by installing Windows on my 770 - 13F X 10.
Here are the problems I encountered (I guess I'll find out later):
-Windows installed a bad driver for the wifi adapter (Qualcomm Atheros) that makes the BSOD on startup. I manually installed a Windows 8.1 driver found on a non official (atheros.cz) in safe mode, with a second PC and a USB key.
Win 10 then start over, but I can not activate wifi, both front panel and fn + F8 key for wifi doesn't seem to work. If anyone has a solution or just a hint...-The main Win 10 Search bar doesn't seem to be functional. It's weird and annoying.
-
Satellite L50Dt - Support for Windows 7
Hello
I'm not a fan of Windows 8 (which is not safe) and I want to install windows 7 on my new laptop. The details are:
M # L50Dt-A Satellite
P # PSKM2A-009005Is someone can you please tell me if it is possible to find all the Windows 7 drivers needed for this particular laptop.
I don't want to remove the file system if it is not possible because I delete the backup partition in doing so.
Any help on this would be greatly appreciated.
Thank you.
Hello
I checked the Australian support page for your laptop model Win7 drivers do not exist so there is no support for it so I think you should stay with Win8 and check if drivers will be offered following weeks or months.
Please before make you anything create recovery (DVD or USB) media so that you can install original Win8 whenever you want.Of course, you can try to install Win7 and check if you can use the drivers available for other models of laptops, but it is hard work and you need to know the specification of the exact material.
-
Technical support for Windows 7
I have a HP computer factory Windows 7 installed. Where can I get support for problems with Windows? Microsoft does not seem to give him, because it is an OEM license, but the HP technical support claim that they offer no support for Windows or!
Y at - it no support for this kind of factory installed Windows?
Escalate the problem and ask for a Manager. The technical support people general HP still don't know the facts that they should. You are a paying customer, so keep pushing and demanding support under your warranty.
Maybe you are looking for
-
My CPU runs at 100% without no reason and programs take a long time to open.
A FEW TIMES WHEN I TRYING TO OPEN A PROGRAM FOR EXPLORER MOMENT HE TAKES A LOT OF TIME IT OPENS original title: RUN MY CPU to 100% BY MOMENTS AND PROGRAM TAKES a long TIME TO LOAD what COULD BE WRONG
-
Can I hide or change the print window not pop up when printing?
Original title: hide or print shown window? Can I hide or change the print window not pop up when printing? I want to still print but just to hide so it does not appear.Is it still possible?Thanks for all help
-
Configure BEFSR41 V.2.1. to use as switch with ADSL ZTE Modem in Bridged mode
I found a thread of 2009 who has a link that could help me with this configuration, but the link does not work. I have a Linksys BEFSR41 V.2.1 and need to set it up, so I can use it as a switch with our ZTE 831 ADSL Modem, which is in bridged Mode. T
-
Im getting a smart test failed on the hard drive - HDBIO-8 faults - contact HP support. Help
I have an office of A6500f. I had starting problems. I have run the smart test and had a disk failure with error HDBIO-8 contact HP support. I tried to reload the default configuration and all other means to boot the machine, but it crashes on the W
-
If you choose for online backups rman, what a $ORACLE_HOME
Hello ladies.I am rewriting our backup procedure. I learned that shortly the company will need the backups online (for the moment, we have the luxury of a backup of cold 03:00).I would like to use rman, must justify the vultures/managers and why it i