ESXi 5 loading new virtual machine ISO

Similar Questions

• ESXi embedded, cannot start the new virtual machine

  We have installed just a Dell PowerEdge 2950 with ESXi embedded.  That part went well.  I am able to connect through the client.  I can create a new virtual machine.  That's where I met problems.  No matter what I tried the machine does not start.  I ' v tried the host device as CDROM, the device as CDROM, and even customer created ISO W2003 CD and downloaded.  I can't understand why he won't start.   Whenever he tried to boot from the network or when he fails he just says "operating system not found" and stays like that.  I started in the bios of the virtual machine and made sure the startup options are correct, etc.  I'm lost.

  I read this forum for like a day and while I see some who have had similar problems, I have not seen this precise question or a question with an answer that applies to my question.  It could be the pre holiday drink

  I hope someone can advise.

  Thank you

  Take a look at this post and try the instructions to boot from an ISO on the side of client - http://communities.vmware.com/message/1106573#1106573.

• . ISO is grayed out when you try to make the new Virtual Machine

  I recently downloaded fusion VM 5 and I am trying to make a virtual machine for windows 7 without using a disc. I use an .iso file that is saved on my mac. When I'm in the new virtual machine Wizard and go click win7.iso I can't because the text and thumbnail are grayed out and won't do anything. Help, please.

  The page you are showing has noting to do with the installation of an ISO Image, it takes to with the virtual hard disk.  The ISO Image is assigned to the CD/DVD in the settings of the Virtual Machine if you don't select it in the wizard at the beginning.

  Documentation (integrated help file).

  1 Select file > new.

  2 the new Virtual Machine Assistant starts.

  3 click on continue without disc to go to the installation media Panel.

  4 in the installation media Panel, click on the image or use operating system installation disc.

  5. use the drop-down menu to locate the file .iso for the operating system.

  6 click Open to identify the file and click on continue to go to control panel of the operating system.

• Change the default options for a NEW virtual machine in ESXI 5.1

  Hello

  I am looking for a solution change the 'default' options for a new virtual machine created in ESXI 5.1

  I want to have parameters such as 'cpu/memory HOT-add' default to enabled instead of disabled.

  There may be more options to change to a new virtual machine.

  All those who have an option to change the 'default' options for new virtual machines?

  THX

  You can change the/etc/vmware/config of vSphere host file and add the lines mem.hotadd = 'TRUE' and vcpu.hotadd = 'TRUE '.
  The settings then apply to any VM on this host when virtual machines are turned on...

  I just tried this on a 5.1 ESXi host and it seems to work perfectly...

  / Rubeck

• Upgrade to ESXi 5.0 to 5.1 - No Hardware 9 option available when creating a new virtual machine

  Greetings,

  I improved my esxi U1 5.0 to 5.1 and attempted to create a new virtual machine in hopes of using the new version of material 9.

  Using the standard and Custom options I been unable to create a Version 9 hardware VM by default.

  The only option I had was manually upgrade to version 9 once the virtual machine was created.

  Any thought or is - this as planned? I need to reinstall from scratch, my host?

  dhayashi

  To create virtual machines with HW version 9, you can use the Web Client, rather than the windows based Client vSphere.

  André

• How to create the new virtual machine vm existing in the data store on ESXI

  I have ESXi and couple of virtual machines.

  I have the vsphere client on Windows 7.

  I then deploy the ovf from the vsphere client vm and it began to import my VM 30 GB.

  In the morning, I realized my vm with a vmdk file file has been transferred in the data store

  But I couldn't see any virtual computer.

  Now I don't know how to turn on this vmdk file that is in my data store

  @King_Robert

  It's a very bad habit of yours to just copy and paste content created by someone else, without even mentioning the source (http://www.mustbegeek.com/create-copy-of-existing-virtual-machine-in-esxi-server/)

  André

• Cannot turn on new virtual machines

  Hello world

  I am running ESXi 5.1.0 (1483097) on a server Dell PowerEdge T300 with 24 GB of RAM and a couple of terabytes of HARD disk space. I have a 64 GB SSD as my default swap file location. I'm unable to turn any VMs created on this server (has only one handful of other virtual machines running on it currently, not more than 4-8GB RAM each). When I try to turn on a new virtual machine, I get the following error:

  An error was received from the ESX host turning on VM <vmname>.

  Has no power on the virtual machine.

  Could not power on VM: insufficient resources.

  Cannot extend the pagefile to 32768 k k 93504.

  Cannot extend the pagefile to 32768 KB 94208 KB.

  There are lots of free RAM available, and I don't have in my pool only resource that all virtual machines live subject. I tried to set the location of the swap file VM to store data of the VM, but that has no effect. Any ideas?

  Hello

  you are indeed running out of space on your destination of swap - you have only 56 MB of free space on your SSD. You're also out of space for swap on datastore1 and 4. I suggest check it and delete all unnecessary data. Please note that by default without reservation, the VM creates a swap file that is equal to the size of RAM allocated to it. If the startup fails with swap on the hard drive, try quick vMotioning or cold - migrate the virtual computer to another storage. Also you could do a lot better with the free space by consolidating all your storage to a single VMFS volume.

• OsCustomizationSpec and OSCustomizationNicMapping they are a good way to set up the new virtual machine for the model

  I build a script to generate auto magicly VM when I have import information from a csv file. I have the latest PowerCli, I am trying to build servers r2 Sever 2012 model.  I tried several OsCustomizationSpec (OCS) of in the hope of getting something to work, but I had no luck so far.  In VCenter, it shows that it applies the OCS, but is not apear to have an impact on the server.  I have disabled UAC since the last time that I tried it so maybe that will make a difference.  I am under ESXi 5.1 update 2, just to try to give all the necessary information.  Ideally, I'd like Sysprep, the value of intellectual property, change the computer name and join the server to the domain.  That's all! lol I have the book "VMware vSphere PowerCLI Reffernece, automating vSphere Administration, I walked through step by step.  The new version of PowerCli seems not have the x 86 limitation as earlier versions of PowerCli.  I tried so many different things, I'm not sure what to put in place as a starting point.

  # Save the object credentials with permission to join the domain.
  $DomainCredentials = get-Credential "domain\testername."
  # Clone our Spec by adding the domain information.
  $Spec = get-OSCustomizationSpec "Windows Server 2012 R2"
  $Spec += get-OSCustomizationNicMapping - Spec $Spec
  #$Spec | Select *.

  # Get our VM
  # Change network settings
  Get - VM BigServername | Get-NetworkAdapter | Together-NetworkAdapter - NetworkName nic - 172.16.25 - VLAN225 - connected: $true '
  -Confirm: $false | out-null
  # Close the comments to make change.
  Stop-VMGuest - VM $VM - confirm: $false | out-null
  # Wait while feedback stops
  While ($vm. ExtensionData.Runtime.PowerState - not "poweredOff")
  {
  Start-Sleep - seconds 1
  $vm. ExtensionData.UpdateViewData ('Runtime.PowerState')
  }
  # Apply Spec customization to apply the new network settings
  Get - VM "BigServername" |
  Set-VM - OSCustomizationSpec "R2 Windows Server 2012" - confirm: $false |
  Start-VM

  I can rebuild the model, or something else, we must do this work.

  OR - is simply not the best way to configure the VM?  If not, what Sysprep?

  Good news, but first, I would really like to know where the log files are on which server to the OsCustomization process.

  I decided to reverse engineer and create a CSOS within vCeneter and once I got to work, I kept creating new CSO via PowerCli until I could get that to work, create a new virtual machine.  Once I got this to work, I have tryied to apply on a cloned vm, with no parameters. I got it works too.  I tried to go back to my original image, but I couldn't get this to work.  Something's wrong with this picture.  He wrath that the problem was related to the permissions on the local client.

  New OSCustomizationSpec - OrgName company OSType - Windows - ChangeSid-Server "vcenter.dom.com" - name PowerCliOnly4 - persistent administrator-Type FullName - AdminPassword! password123 - zone "Eastern (USA and Canada)" AutoLogonCount - 3 - domain dom dadmin - DomainUsername - DomainPassword! password123 NamingScheme - vm-Description "PowerCli Use only" - confirm: $false

  Get-OSCustomizationNicMapping - OSCustomizationSpec PowerCliOnly4 | Game-OSCustomizationNicMapping - Position 1 - IpMode UseStaticIP - IpAddress 10.10.10.98 - 255.255.255.0 - DefaultGateway 10.10.10.1 Dns subnet - mask "10.10.10.10","10.10.10.11" "-confirm: $false

  This seems to be very picky.  Because the area is one of the parameters, you cannot put it in the DomainUsername, no dom\dadmin. The part that I really want to know how to get more, is what happens if your vm has a different local administrator as the administrator account.  It turns out that FullName - is not the account that it to connect locally with tires. When I created the vCenter Medtronic Chondroitin, I put 'me' in the name and information of the Organization and that's what was settled in the FullName property:

  Name: PowerCliOnlyM
  Type: persistent
  ServerId: /VIServer = dom\[email protected]: 443.
  Server: vcenter.dom.com
  LastUpdate: 24/09/2014 13:33:19
  DomainAdminUsername: dadmin NO dom/dadmin here!
  DomainUsername: dadmin
  Description: PowerCli use only, done manually in vCenter.
  AutoLogonCount: 3
  ChangeSid: true
  DeleteAccounts: false
  DnsServer:
  DnsSuffix:
  Domain: vsi
  Full name: me
  GuiRunOnce:
  NamingPrefix:
  NamingScheme: Vm
  OrgName: CompanyTU
  OSType: Windows
  ProductKey:
  Time zone: (USA and Canada)
  Working Group:
  LicenseMode: NotSpecified
  LicenseMaxConnections:
  EncryptionKey: {-126, 3, 48, 108...}
  ExtensionData: VMware.Vim.CustomizationSpecItem
  ID: PowerCliOnlyM
  UID: /VIServer = vsi\[email protected]: 443/OSCustomizationSpec = PowerCliOnlyM /.
  Client: VMware.VimAutomation.ViCore.Impl.V1.VimClient
  AdminPassword: w
  DomainAdminPassword: N
  DomainPassword: N

  DNS: {10.10.10.10, 10.10.10.11}
  Wins                  :
  SpecId: PowerCliOnlyM
  Spec: PowerCliOnlyM
  SpecType: persistent
  NetworkAdapterMac:
  Position: 1
  IPMode: UseStaticIP
  IP address: 10.10.10.98
  Subnet mask: 255.255.255.0
  DefaultGateway: 10.10.10.1
  AlternateGateway:
  VCApplicationArgument:
  ID: /VIServer = dom\[email protected]: 443/OSCustomizationNicMapping = OSCustomizationNicMappingImpl-PowerCliOnlyM-persistent-1.
  UID: /VIServer = dom\[email protected]: 443/OSCustomizationNicMapping = OSCustomizationNicMappingImpl-PowerCliOnlyM-persistent-1.
  ExtensionData: VMware.Vim.CustomizationAdapterMapping
  Client: VMware.VimAutomation.ViCore.Impl.V1.VimClient
  Version: 1

  I think that it is good to know that the virtual machine reboot 4 or 5 times as it goes through this process.  It breaks is you try and do something for the virtual machine that interrupt the process.  I don't know that I'll think more questions in a second.

  In addition, it cost he had some problems with the put between quotation marks, single or double around the password, but I did not check this again, I just know that once I took them, he began to work.  I ran on other issues while testing as I was using a single IP address, so if I do not disable the test VM, the following would not work because of the conflct network, maybe I shouldn't admit that... lol

• VMware workstation, crashes when I try to create a new virtual machine

  Hello

  I never had this problem before, but I didn't create a new virtual machine in a very long time. Last time I created one was making Workstation 9 I think. Some time after the upgrade to Workstation 10 or 8.1 of Windows Update 1 it has started.

  In 10 Workstation running on Windows 8.1, I select the file > new Virtual Machine dialog coming upwards and in a few seconds crashes of VMware workstation and closes.

  So I checked the Windows event logs and find

  Warning "VMware Workstation to function properly, must be reinstalled after the upgrade to Windows."

  So, I upgraded from 10.0.2 to 10.0.3 and it uninstalled and reinstalled but I still get this warning.

  Followed by an error

  ***

  Journal name:	Application
  Source:	Application error
  Date:	15/08/2014 23:33:53
  Event ID:	1000

  Task category: (100)

  Level:	Error
  Keywords:	Classic
  User:	N/A
  Computer:	P7Win8MC

  Description:

  Name of the failing application: vmware.exe, version: 10.0.3.48389, time stamp: 0x539a4fb0

  Name of the failed module: MSVCR90.dll, version: 9.0.30729.8387, time stamp: 0x51ea24a5

  Exception code: 0xc0000005

  Offset: 0x0003bece

  ID of the process failed: 0 x 1788

  Start time of application vulnerabilities: 0x01cfb902de541c11

  The failing application path: C:\Program Files (x 86) \VMware\VMware Workstation\vmware.exe

  Path of the failing module: C:\WINDOWS\WinSxS\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.8387_none_5094ca96bcb6b2bb\MSVCR90.dll

  Report ID: 24d5effb-24f6-11e4-bedd-20cf30780548

  ***

  So I need help to track down what I am not sure what VMware paper to look to maybe see what is happening.

  Thank you

  Rainey

  Well, I found the problem.

  I looked in the UNK file and found a few ISO files wrongs tracks.

  I had mounted some ISO in the past and they have made the entry in this file of preferences such as "isoLocationMRUx".

  I'd change the leter this ISO file player so they could not be found as input, once I corrected the paths I can now create a new virtual machine.

  He is responsible for ion BONE the new virtual machine now.

• USB HDD as a data store and storage of VMS and new virtual machines

  I have a server Esxi 4.1 with 1 TB RAID 5 storage and 3 virtual machines. The storage is full and no space for another HARD disk, so my question is: would it be possible to use a USB HDD as a data store and could be included as a storage for new virtual machines or the VM? If so, could someone let me know how to do it because I'm not able to detect the HARD disk on the host itself.

  No, it is not possible to use a USB drive as a data store.

  Linjo

• Failed to create new virtual machines on ESXi4.1 due to the error of slot

  Hi people,
  I am unable to create new virtual machines more on ESXi4.1 host due to the error of the slot. Its shows error "number of devices virtual exceeeds the maximum controller. In a cluster, we have 3 host ESXi 4.1.
  Each ESXi is IBM 3850 M2 / x 3950 M2, CPU Cores 24 CPUsx2.665 GHz.Processor Intel Xeon x 7460 @ 2 .66GHz CPU Type

  Please find the attached screenshot. Any help will be much appreciated.

  Thank you
  vmguys

  See http://kb.vmware.com/kb/1016221

• New virtual machine cannot reach gateway all-in-olders Yes

  Hi, I'm using ESXi for a year with no problems, but now I'm having a very strange situation. New virtual machine cannot reach the front door, while the 'old'. New virtual machine can ping olders VM and vice versa, but new looks as private. I tried different OS and still have the same question.

  That's what I have:

  Reference DELL R610 with RAID - 1 and RAID-5

  ESXi free 348481 4.1.0

  1 card NETWORK connected

  IPs public 16

  4 VM (W 2008 32bits, W 2008R2 64, 32 2008 W, W 2008 64) works perfectly

  All VM are stored on the local Datastore2 (raid-5)

  Last week, I installed:

  1 Openfiler ESA (gateway problem)

  1 W 2008 R2 (gateway problem)

  1 W XP 32 (gateway problem)

  1 W 2008 32 (gateway problem)

  Older VM never lose connection with gateway and beyond

  New never manage to bridge

  I can't manually add gateway IP/mac address (error 5) in the new.

  Anyone can figure it out and how to solve? I'm really lost.

  Thank you

  New virtual machine can ping olders VM and vice versa...

  This excludes actually questions 'virtual '. The vSwitch has no restrictions.

  What kind of physical switch are you using? If this is a CISCO switch to ensure that the port is configured as a port of access (or trunk port) and spans tree portfast is. Some CISCO switches have a "macro"set desktop on their ports which limits the number of MAC addresses that are allowed on the port.

  André

  PS: Please don't ask me. Did you check the address of the gateway AND subnet mask are correct for the new virtual machines?

• Could not start the new virtual machine or VM remove a data store

  Hi guys,.

  I'm not new with ESXi, but my knowledge with vCenter and Clustering must be improved, so here's my problem.

  We have a Cluster of 2 ESXi 4.1 hosts on a San with 2 VMFS.

  My first problem is when I created a new virtual machine and try to start it, I got an error message similar to the one included with this post.

  My Second problem is more picky. Since I am unable to start my new virtual machine, I had removed from drive and I had created a new. But when I took a peek in the data store where was deleted VM, the directory with all the files are still there. When I try to delete it, I got an error message telling me that it is impossible to proceed.

  Q please?

  Best regards

  Stéphane

  82% of failure can be other issues.  The article below

  http://KB.VMware.com/kb/1006052

  Also, I saw, where bad records DB for your ESXi hosts can cause weird problems as well.  The host with the problematic guest, can you do a right click on it and "disconnect"?  Try to get out of the bunch at the data center level.  If you get an error vCenter, that means return folder DB.  From there, while the host is in a disconnected state, remove the host to vCenter, then "add host". This will update the DB record.  Maybe worth it?

• Windows 7 Edition Home Premium (student edition) x 64: how to do a clean install into a new virtual machine?

  After downloading Windows 7 Home Premium 64-bit student supply store online, I have now three files: Win7-HP-Retail-en-us-x64.exe, Setup1.box, Setup2.box.

  How to create an installation disk or an ISO image of these files, so that I can do a clean install of Win7 in a new virtual machine?

  It turns out that it's a known issue:

  http://www.mydigitallife.info/2009/10/23/how-to-create-and-make-bootable-Windows-7-ISO-from-exe-plus-Setup1-box-and-setup2-box-files/

  I hope this helps.

  Please give the points if you found it useful.

  http://www.1zero1.NET

• Default directory for the creation of new virtual machines

  Is it possible to change the default folder for new virtual machines in the data store? Then, instead of esxi always create virtual machines directory under / you can have create the folder in a subfolder.

  Must be removed. I just watched ghetto HA script a lamw to see if she could be easily adapted to do. I don't think it would take a lot. It would automate the task of the cancellation of registration, travel and re-entry.