ESXi 5 - Set Roundrobin multipathing policy on all LUNS

Similar Questions

• Apple Extreme, Time Capsule and Express on the same system, what is the best way to set it up so that all devices smoothly from one end of the House to another?

  Apple Extreme, Time Capsule and Express on the same system, what is the best way to set it up so that all devices smoothly from one end of the House to another?

  I'm going to assume that you plan to have wireless devices.

  Let's say that the Capsule is your "main" router  If this is the case, then it must be located in the House, so that the distance between the time Capsule is the same for the outside walls of the House.

  Then, on the 'left' side of the House, looking for an airport to midway between the Capsule and time of the outer wall of the House. Do the same thing the 'right' side of the House.

  In other words, each of the two airports that "extend" the wireless signal are located at equal distance from the Capsule of time... but they are in opposite ends of the House.

  If you intend to interconnect all the airports and Time Capsule using a permanent, Ethernet wired... which by far is the 'best' way to put in place a network in terms of performance and reliability... then you can locate one of the devices anywhere you want.

• How can I set password lockout policy on the XP Home Edition...

  How can I set password lockout policy on the XP Home Edition...

  Hi Gafoor0,

  The question you have posted is better suited in the TechNet forums. Please see the following link for more information.

  Windows XP IT Pro category

  You can also check:

  Microsoft Windows XP - account lockout policy

  The passwords and policies in Windows Server 2003

• While on internet, set Windows Firewall to 'block all '.

  Original title: Firewall Windows 'block all '.

  With the help of windows Firewall in Win7.

  Is there a way to easily set the firewall to 'Block All' (comings and goings) activity while I'm connected to the internet.

  I'm used to the use of 3rd party firewall and some have the choice of check "block all activity" on a right click of the icon 'taskbar '.

  I will use if go to leave the PC while on the net for more then a few seconds.

  I ask because firewalls 3rd party having this option does not work well with windows7.

  I don't want a process such as the control panel / advanced settings/unnecessary procedures / make / do that / go away/come back / freeze the system.

  Then having to do it all again in reverse to be reconnected.

  A simple one click / two click process that works.

  Anyone?

  Hello

  Thank you to provide us with an opportunity to help Microsoft Community, we are happy to help you.

  A firewall can help prevent hackers or malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers.

  If you want to block all connections using the Windows Firewall, please follow the steps mentioned below.

  1. Open the start menu.
  2. In the search box, search for "Windows Firewall".
  3. In the search results, select "Firewall with Advanced Security Windows".
  4. In the 'Présentation' section, check to see which profile is active. By default, it should 'private profile '.
  5. Click on the link marked "Windows Firewall properties.
  6. Select the tab 'private profile '.
  7. Make sure that "Firewall State" is set to "on (recommended)."
  8. Under "Incoming connections" click the menu drop down and select "Block all connections."
  9. Under "Outbound connections" click the menu drop down and select "block".
  10. Next to "Protected network connections", click on the button "Customize".
  11. Make sure all of the checkboxes are marked, especially 'Connection to the Local network' and 'Wireless network connection' (as appropriate).
  12. Click on the OK"" button. Closing this dialog box, click on the 'OK' button on the next dialog box.

  For more information, please see the link below.

  Windows Firewall with Advanced Security Properties Page

  Hope that the information provided is useful. Keep us updated on the State of the question, so that we can help you further.

• I've just updated to creative cloud cc, I need backup of my set of creative suite (cs5 all) and remove it from my mac - i need the operation space what I do

  I've just updated to creative cloud cc, I need backup of my set of creative suite (cs5 all) and remove it from my mac - i need the operation space what I do

  I don't want to just to the top of my plug ins I want to back up all of the following can I do this?

  TKS in advance

  Don't forget to keep your serial number.  If you do not track your Adobe account online in the section products - I recommend that you keep a copy of it for each time you call home.  The installation files are currently available through...

  CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

• The strategy of repetition alternated on all LUNS

  Hello:

  I want to implement a policy of RR on all my LUN at a time (VI4)...

  I thought this script should do (I got it from http://blogs.vmware.com/vipowershell/2008/07/managing-storag.html):

  $VCimpl = to connect-VIServer 'VCenter.

  $policy = new-object VMware.Vim.HostMultipathInfoFixedLogicalUnitPolicy

  $policy.policy = "rr".

  $storageSystem.StorageDeviceInfo.MultipathInfo.lun |

  where {$_.} {Path.Length - gt 1} |

  foreach {$storageSystem.SetMultipathLunPolicy ($_.ID, $policy)}

  But it does nothing, no error either...

  How can I set it to RR set able one all LUNS.

  Thank you

  If you cannot use

  Get-ScsiLun -VmHost (Get-VMHost $esxName) -LunType disk |  Set-ScsiLun -MultipathPolicy "roundrobin"
  

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Get-Content are PowerCLI to apply the settings to the OPS / s on all LUNS

  Hello

  I want to change the settings of IOPS / s by default all LUNS, I found it a bit tedious to do it for each LUN. What I want to do is put all the WWN LUN name to a file and read the file to apply

  esxcli storage nmp psp roundrobin deviceconfig set --type=iops --iops 1  --device=
  

  Get-Content C:\LUNPaths.txt | esxcli I do not know how to do it in esxcli.

  Thank you

  You can read the name WWN in a table and then use the Contains operator to check if the current device belongs to your list of targets.

  Something like that

  $wwn = Get-Content -Path C:\WWN.txt
  $esxHosts = Get-VMHost -Location $mycluster | Sort Name foreach($esx in $esxHosts)
  {
      $esxcli = Get-EsxCli -VMHost $esx    $esxcli.storage.nmp.device.list() | where {$wwn -contains $_.Device}| %{
          $esxcli.storage.nmp.psp.roundrobin.deviceconfig.set($null,$_.Device,1,"iops",$null)
      }
  }
  

• Set the path preferred on a lun by naa ID or lun number

  I'm looking for a script to set the path for a lun or 2 at a time. I would like to by lun or naa id #.  the LUNS are rdm if this is important.

  I searched, and only scripts seen that the value all LUNS a hba for preferred path.   ESXi 4.1 if hosting is important

  Mike

  It's strange, that the cmdlet Get-ScsiLun takes an HBA from the pipeline object.

  You can get help for all Select-Object parameters with

  Get-Help Select-Object-parameter *.

  To get the 2nd object, you could do

  Select-Object - Index 1

  BTW you're on PowerCLI 5.0.1 now?

• MultiPath policy set to VMW_PSP_FIXED_AP gets error

  Hi, I am running the following script and get the below error

  # Get the user information

  $vc = Read-Host "Please enter the name of the vCenter server:
  $uname = Read-Host "Please enter the user name to connect to vCenter server:
  $upass = Read-Host "Please enter the password that is associated:
  $clusterName = Read-Host "Please enter the name of the Cluster:
  Write-Host "Connection to the server vCenter $vc, please wait." - black BackgroundColor - ForegroundColor white
  SE connect-VIserver $vc - user $uname - password $upass | Out-Null

  ###

  # Recover clustered ESX hosts

  $VMHosts = get-Cluster $clusterName | Get-VMHost

  # Go through this loop for each host in the cluster

  foreach ($VMHost to $VMHosts)
  {
  $luns = @($VMHost | get-scsilun-luntype disque | where-object {$_.) {ConsoleDeviceName-like ' / vmfs/devices/drives/naa * "} | Sort-Object CanonicalName)
  $firstLUNPaths = get-ScsiLunPath - ScsiLun $luns [0]
  $numPaths = $firstLUNPaths.Length
  $count = 0
  foreach ($lun to $luns)
  {
  If ($count - ge $numPaths)
  {
  $count = 0
  }
  $paths = @(get-ScsiLunPath-ScsiLun $lun)
  $lun | Game-ScsiLun - MultipathPolicy VMW_PSP_FIXED_AP - PreferredPath $paths [$count]
  $count += 1
  # Sleep for 30 seconds to avoid saturation of the picture.
  Start-Sleep - 30 seconds
  }
  }

  Here is the error

  
  Game-ScsiLun: cannot bind parameter 'MultipathPolicy '. Cannot convert value "VM".
  W_PSP_FIXED_AP' type 'VMware.VimAutomation.ViCore.Types.V1.Host.Storage.Scsi '.
  . ScsiLunMultipathPolicy' due to invalid enumeration values. Specify one of the
  following enumeration values, then try again. The possible enumeration values are
  "Fixed, MostRecentlyUsed, RoundRobin, unknown".
  In C:\Program Files (x 86) \VMware\Infrastructure\vSphere PowerCLI\scripts\fixedp
  olicy.ps1:31 tank: 36
  +         $lun| Game-ScsiLun - MultipathPolicy < < < < VMW_PSP_FIXED_AP - PreferredPa
  Th $paths [$count]
  + CategoryInfo: InvalidArgument: (:)) [game-ScsiLun], ParameterBin)
  dingException
  + FullyQualifiedErrorId: CannotConvertArgumentNoMessage, VMware.VimAutomat
  ion.ViCore.Cmdlets.Commands.Host.SetScsiLun

  It doesn't seem like the VMW_PSP_FIXED_AP of the PSP, even if I can put it in the GUI. I'm under a Clariion CX4 and move to this policy rather than alternating repetition to get an automatic restore of LUN. Am I missing something? The script works fine if I use 'FIXED' but I want to use VMW_PSP_FIXED_AP for ALUA.

  Any help would be greatly appreciated. Thank you!

  OK, I see. In this case, you can use the Get-EsxCli cmdlet.

  See the post of Arnim, called ESXCLI the PowerCLI, for a detailed description.

• See Multipathing policy

  
  How can I check the policy of Multipathing through all hosts on my cluster?

  Take a look at 3 Re: multichannel policy statement  

  Instead of making for all ESXi hosts in a cluster, you can just do a Get-VMHost to cover all ESXi hosts.
  

• ESXi 5 setting up Cluster after the fact

  I have 4 ESXi 5 servers in VMware ESXi 5 environment; each server has 6-8 Windows 2003/2008 comments servers. It is on for about 1 year. I would now like to create 1 cluster that would include all 4 ESXi servers. I want to do to ensure that we can take full advantage of HA capacity and failover. Now, I know that I should have put in place from the beginning. If I had to do it now is there anything else I should look out for. Should I close all my guests, first of all, if I the not to scream on all clients will there be any problems? I'm looking for the best approach to move forward with this. Also, I found documentation on blogs etc regarding what parameters to set when the configuration of the cluster, but they do not seem to agree so if someone has VMware's official recommendations for the specific parameters of the cluster that would be appreciated as well.

  There is no need of customers stop to add a host in a cluster.

  You just have dark cluster first. (Do not enable the cluster first by tick HA or DRS)

  Drag and drop the hosts one by one to the cluster.

  Once guests are part of the cluster go edit cluster and select the cluster.

  My advice for you is to get some advice on the design of the cluster.

  Since its so easy how vmware did create cluster in vsphere people tend to fund groups and add hosts to them and a difficult time finding the cluster settings and some tring to understand why some virtual machines have not restarted because of a faliure.

  then a friend do your first planing.

  Good luck...!

  NJ

• Set up a wireless HP all-in-one printer on your desktop with Windows XP Pro Version 5.1 SP3

  Recently, I uninstalled Solution Center HP from my desktop PC with Windows XP Pro Version 5.1 SP3.  The program worked very well and was connected wireless to my HP Photosmart all-in-One 309 g.

  Now, when I downloaded the latest software feature full HP and installed, it has completed the installation but could not connect to the wireless printer.  Setting up the wireless printer, he did 'see' the HP 309 g printer and I chose this but it gave me a dialog box saying that there was no installation configuration.  I also, tried the control panel "Add Hardware", but he couldn't 'find' the printer.  What should I do?

  You have an icon for the 309 g Photosmart in Start menu > printers and faxes?

  If so, right-click on it, select Properties, and click the Ports tab.
  By ensuring NOT to click inside the list, use the scroll bar on the right until you see the line highlighted and verified with the port used for this printer.  That said this line in the columns 'Port' and 'Description '?

  Note that you may need to click and drag on the small vertical line between 'Port' and 'Description' in the header line to make the column wide enough to read the entire entry.

  Click Cancel to exit the printer properties dialog box.

• Why used to address changes Proxy stick of group policy for all users in Active Directory?

  We re-installed the Customer Site Proxy on a BDC service, we published all the strategies of Active Directory for the new DC IP address group however for many users in Internet Explorer LAN settings always keep coming back to the old address when adding in group policy, any ideas of what we missed?

  Hi MikeButterworth,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet forum.

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

• Copy replace (Yes all), can I set up a 'no to all '.

  That I've updated the files with the new files and copy memory stick to the folder I get something like: "this file already exists you do want to overwrite ', everyone saw him. Rather than saying 'Yes to all' I want to say 'no to all' and just copy the new files to configure Windows XP to do this?

  Thank you

  I'm sorry, but I don't know how to do this.

  To avoid this problem, I recommend to use a synchronization program files, like second copy , Microsoft SyncToy or Replicator from Karen , who can compare two sets of files and copy only those who is new or changed. Boulder computer Maven
  Most Microsoft Valuable Professional

• How to set the parameter "Apply to all folders" never works?

  Should we wait for an SP1 update or something?  It worked fine under XP!  He is broken in Vista and I was hoping that Microsoft fixed in 7 but it still does not work?

  I just want all my files in the LIST format display everytime I open a new window to the Solution Explorer, but no matter how many times I click "Apply to all folders", it does not work.

  TAGS: change, default, view, windows Explorer

  He asked how to apply a setting to all folders. You said how to define a view in a folder TYPE (which, btw, does not seem to work either). If you do not answer the question, why say anything at all? : P

  Microsoft is always disappointing me. I just bought a laptop with Windows 7 and I can't do a lot of things I did in XP (the configuration mentioned above, for example). I don't understand why they would remove operating characteristics, good. But they do... :(

  See http://en.wikipedia.org/wiki/List_of_features_removed_in_Windows_7 for a reference.