How to set the parameter "Apply to all folders" never works?

Similar Questions

• How to set the parameter reset?

  I put the (url, clipStartTime, clipEndTime) alone in the StreamingURLResource class

  How to set the parameter reset? I want to NetStreamPlayTransitions.APPEND set

  THX

  Mike.

  This is not currently supported with OSMF.  You use this feature (APPEND) regularly?  If so, you can file a request for improvement with use case here?  Thank you!

• How to set the parameter of the BIOS under XP?

  I'm trying to boot into the recovery console windows using a bootable XP Recovery console CD. But I do not know how to set the BIOS to achieve this. Can someone give me instructions step by step? Thanks in advance.

  A quick search on Google for

  For Lenovo 3000 change boot sequence

  .. .finds a message in the forum of the Lenovo users who said you choose Start and adjust it.

  I can't check it works, but maybe someone who knows the Lenovo will verify that or tell you what to do.

  It seems like a simple process, but some of the discussions on how to boot from a CD are ridiculously long and full of trail and error.  When you get your job, let know us the good way that works and I'll put it in my notes!

  Here is a link to the Lenovo's Support Page:

  http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do?country=us

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• How to set the parameter for the button programmatically via the controller

  Hello
  
  I created a button in the advanced table (seeded page) as a column using customization called 'Submit', I pulled this button via PR in the extended controller action.
  
  Now I want to get the value of SuccessionPlanId (one of the column of this advanced table) when I press the button 'Submit' in the controller.
  
  If I can be able to get this means value of SuccessionPlanId I will then cross this value to the stored procedure, callable statement.
  
  So suggest me how do it in the controller.
  
  or tell me how to add the parameters programmatically to the button.
  
  Thanks in advance,
  
  SAN

  Hello

  package difference

  import

  oracle.apps.per.selfservice.successionmgmt.server.PerSuccPlanSearchVORowImpl . instead of

  oracle.apps.per.selfservice.successionplan.server.PerSuccPlanSearchVORowImpl;

  Thank you
  Pratap

• How to set the common lov for all blocks

  Hai All
  
  I created two block named block 1 and block 2.
  
  And I created a lov for block1 display their name and code.
  
  Now I need the lov even block and how do I fix this lov for block
  
  
  Thanks and greetings
  
  Srikkanth.M

  I have two blocks namely head and employee block

  These two blocks are blocks of database?

  In the next block, I got the employees under the head and the Department

  So that these data are related or using any other means?

  I had a single table and I need to enter the data.
  Table called hierarchy_tree
  Head_Empcode, Emp_empcode, From_Date and To_Date.

  This table is for everyone on the block you used in your form?

  My question is if there are four employee under a head then if possible enter all the used four simultaneously.

  You can enter data simultaneously. But you can post sample data. So it will be easy to say something?

  -Clément

• text too small - how to set the upper size for all windows

  Separated from this thread.

  I NEED LARGE FONT ON MY PC FOR OFFLINE USE, BECAUSE OF ME VISIUALY INPAIRD

  I NEED THIS BAD FOR THE SCHOOL. PLEASE LET ME KNOW AS SOON AS POSSIBLE!

  EZERA Q

  Ezera salvation,

  Thanks for posting your question in the Microsoft Community.

  Screen resolution refers to the clarity of the text and images displayed on your screen. Change the resolution of the screen and check if that helps.

  Change your screen resolution

  http://Windows.Microsoft.com/en-in/Windows7/change-your-screen-resolution

  Hope this helps you. Please let us know if you need assistance.

• dimmed folder "Apply to all folders" view

  For some reason any default folder view changed something I certainly won't.  However, when I go to "Folder Options" to change the display by default, the option "apply to all folders" is grayed out.

  Why is this?  How can I change the display of files by default to what I want?

  Thank you.

  Hi Laurei,

  Thanks for posting in the Microsoft community! You have reached the right forum for your question.

  Method 1
  I suggest you try the steps from the following link:

  How to modify your folder view settings or customize a folder
  http://support.Microsoft.com/kb/812003

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: http://support.microsoft.com/kb/322756

  Method 2
  I suggest you perform the clean boot and check if the problem persists.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note: Make sure that you reset the computer back to normal once the diagnosis is complete.

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Mac Mavericks. Camera raw 9.1. Camera Nikon D810. How to set the default settings of the camera profile standard (now available after downloading the camera profile and copy it into the appropriate file)? Is it possible to apply also in the pictures showe

  Oops... did not write the question where I... How to set the default settings of the camera profile standard (now available after downloading the camera profile and copy it into the appropriate file)? Is it possible to apply too in images showed in the bridge? I'm a newbie in the forums and I'm not sure how to proceed.

  You can right click and copy the settings on an image that has the right profile. Then highlight all the images that you want to edit, right click and paste the settings. On the list that is displayed, simply choose the camera calibration.

• How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?

  How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?

  Here is the error

  Failure of deployment: Info: request shipment: install and launch
  Info: Action: install and launch
  News: Native debugging: on
  Info: File size: 219949
  Info: Installing com.example.UIBB10AppTest1.testDev_B10AppTest15dd51c62...
  Info: Treatment 219949 bytes
  actual_dname:
  actual_id:
  actual_version:
  result::failure 881 the application author does not match the author token of debugging

  The author information is located in the bar - descriptor.xml in the tab "General". But the information must be defined automatically. In addition, you must install the token debug on your device.

  If everything is configured properly there is only one problem that happened to me. I had several chips debugging Momentics. I had to remove all chips debugging and leave alone the I want to use. Perhaps, you have also several debugging chips installed in Momentics. This seems to be a bug in Momentics who can't handle several chips debugging.

• How to set the & quot; setContentPath & quot; with a URL parameter

  Hey,.
  I have a video player (video_player.swf) with the component playback flv in it. I was wondering how to use the URL to set the parameter "setContentPath". While I didn't have to make a separate video player for ever flv on the site. I didn't know if I could add a listener to the URL or something so that I could put it like /player/video_player.swf?video_id=1
  
  Thank you very much people P.S. I need that's before the end of the month.

  OK, here's the html part of the process:
  http://www.polar-lights.com/FLA/URL.html

  Here is the flash part:
  vid.contentPath = _level0.movie;

  vid is the name of the instance of the FLVPlaybackComponent
  _level0. Movie is a variable passed in the url string - it would look like:
  http://www.yoursite.com/filename.html?movie=flvfilename.FLV
  See how after the html page you ger the? film - which is the variable passed in flash. Be sure to use the HTML code on the top of the sample page in order to pass the variable into the SWF.

• How to set the path of the report in a plugin for model

  I'm trying to figure out how to set the path of the report in a plugin process model. I can't find a way to have access to it. It seems this would be a reasonable thing to do since the plug-ins are for the treatment of the results. Does anyone know how to do this? We generally use the sequential process model, but I try to keep my plug-in as independent as possible.

  Thank you.

  If I understand correctly, you want your plug-in, when enabled, change the settings of all other instances of the report OR plugin as their reports share the same directory that your plug-in is configured to use.

  If so, your plug-in can access and change the settings of all other instances of plugin. All instances are passed to all the points of plugin entries in the subproperty of the plugins of the ModelConfiguration parameter table. You can browse this table. Any element of the array with an equal to "NI_ReportGenerator.seq" Base.SequenceFilename is an instance of the report OR plugin. Its report options are stored in the element under PluginSpecific.Options.

  You can change the report options to what you want. Note that the recall of the ReportOptions model is called from template-plugin Initialize entry point, then you might want to ensure that your changes are applied after that, so they are not replaced. To do this, you could make your changes in the Initialize entry point of your plugin and make sure your plugin runs last. To rotate the last, you can set the FileGlobals.ModelPluginComponentDescription.Default.Base.RunOrder in your file of plug-in with a value greater than 0, for example 1.0 (see Help for TestStand > Fundamentals > process template Architecture > plug-in for the model process Architecture > Structure of the plugin sequence files > plugin model of entry Points > Order Execution of Point of entry at run time).

• How to set the size of OpenFileDialog and make permanent

  Whenever I have use openfiledialog I need to resize again. Also when I select the 'details' mode it does not stick and I have to choose it again whenever I open it

  Hi EmadRamsey,
   
  When you select a particular display for files and folder, make sure that apply you the view to all folders.
   
  Follow this step to do the same thing:
   
  a. open the Explorer. The folder set to details.
  b. click on tools > Folder Options > (tab) display and select apply to all folders. Click OK.
   
  How to arrange files using folder views in Windows XP
   
  By default, Windows Explorer will remember the last window size before its closure.
   
  When you resize the box open the file, hold down the 'Ctrl' key, then exit the Explorer by clicking on the icon 'close' at the top right of the screen (not quit Explorer by clicking on exit on the file menu).
  Release the "Ctrl" key and then reopen the window and check.

• Jdev jpr file: set the parameter ${maven:maven.local.repo}

  Hi all

  I use Maven (3.0.5) to compile and deploy complex Applications of ADF (12.1.3).

  I noticed that, contrary to what is said in this discussion of adf Group Google by a member of the ADF team

  «To 12.1.2 we introduced Maven plugins for ojmake and ojdeploy.» It still requires an Oracle executable on your build server, but 1) avoids having to invoke the crafts Maven ant tasks and 2) allows to ojmake/ojdeploy use the dependencies declared in the POM rather hardcoded references to libraries of JDeveloper.«,»

  ojmake still seems to need a reference hardcoded for external dependencies in the JFL Elf, he uses.

  For example, addition of guava as a dependency in the file pom of an ADF project configured in Jdev to use Maven, will result in a similar entry in the JPR file:

  < list n = "libraryDefinitions" >

  < hash >

  < list n = "classPath" >

  < Protocol url = 'file' path = "/${maven:maven.local.repo}com/google/guava/guava/17.0/guava-17.0.jar"/ > "

  < / list >

  < value n = v "deployedByDefault" = "true" / >

  < value n = "description" v="com.google.guava:guava:17.0:jar"/ >

  < value n = 'id' v="com.google.guava:guava:17.0:jar"/ >

  < value n = v 'locked' = "true" / >

  < / hash >

  < / list >

  My question is: what is this variable in the JPR file decided to? How we set the value of ${maven:maven.local.repo} from project pom file?

  The maven variable ${settings.localRepository} did not help.

  PS: what seems to be needed on our server of Jenkins, on which to perform the installation on Jdev 12.1.3 has been installed locally in order to get the ojmake, ojdeploy and they hide dependencies. The user who installed Jdev being another than that actually run the maven jobs (jenkins). In addition, its local maven repository is not the value default ~/.m2/repository but /srv/.m2/repo21

  Thank you very much in advance for your time and help.

  Jeremiah

  Thank you all for your contributions.

  I found it. In case the Jdev Installation is on a CI server, without starting Jdev itself, the following file should be added to allow to use another system as the default file Maven ~/.m2/settings.xml settings:

  • ${ide.pref.dir}/system***/o.jdeveloper/product-prefences.xml

  I have this file, the absolute path to the Maven settings file can be set via:

  http://xmlns.Oracle.com/IDE/hash">

  That's all!

  Please don't tell me that Oracle did not REAL PLUGINS MAVEN (standalone) for ojmake and ojdeploy with the maven as optional parameter settings file.

  This a shame for such an expensive having framework to do what 'kitchen '!

• How to set the timeout property Web Service partner link in the new version of the SOA Suite, it is missing

  Hello

  I have a use case in which I'll call synchronous external Web Service and the form of this service, I get the answer after 80 seconds.

  I know that this console form EM soa-infra-> SOA Administration-> BPEL proprieties-> under 'more BPEL Configuration Properties..' in SyncMaxWaitTime can I change the default 45 second in 80 seconds, but it will apply to all synchronous services in this area, and I want only the value appeal of Web Service of particular external reference (link partner).

  For the limit of timeout for the particular web service (partner of external reference link):

  I saw a post at < http://www.mandsconsulting.com/asynchronous-vs-synchronous-bpel-processes > in which there is an option in 'Link partner Edit' form property tab dialog box, we can add "timeout" property but in SOA Suite11.1.1.7 I am not able to find this property form the list.

  on this post < http://abhishek-soablog.blogspot.in/2010/06/timeout-for-partnerlink.html > is also described the same way, but it's just the source code of the highest way of GUI to set the timeout property and it does not work with a new version.

  Can someone please tell me in a new version (11.1.1.7) of SOA suite, which is how to set the timeout for the particular web service (partner of external reference link).

  Thank you

  Can someone please tell me in a new version (11.1.1.7) of SOA suite, which is how to set the timeout for the particular web service (partner of external reference link).

  VR;

  Click em-> composite-> Services and references-> select need to reference and click on-> properties: 'HTTP Timeout of read' and 'HTTP timeout.

  developing composites:

  Click on a reference-> property inspector-> link properties-> plu green and add oracle.webservices.httpConnTimeout with the necessary value and oracle.webservices.httpReadTimeout with the necessary value

  for the same domain defined: oracle.webservices.local.optimization = false

  You can watch

  Administration of Web Services - 11g Release 1 (11.1.1.7)

  How to set a timeout for a Web Service in SOA 11 g (Doc ID 979683.1)

  SOA 11 g: political malpractice not to intercept 'service Endpoint unreachable' error (Doc ID 1503989.1)

• How to set the default duration through the effects of the dissolution?

  How to set the default duration through the effects of the dissolution? I use it on all the titles I would add, and I add a large number of titles on my clips and change the duration of each crossing simple dissolution effect is a little easy, but a lot of time.

  Or if there is simply a way to add titles giving cross them dissolve effect in case of default of a predefined, which would also be very useful. Enjoy all the tips

  Go to Preferences > general, then set it to "video Transition default Duration", but many executives you want it to be.

  Note that this applies to everything that you set your default transition, which is chained by default.

  Hope that helps!