esxi data warehouses sees the other?

Similar Questions

• Data type of the other schema reference

  Hello
  
  I want to reference the data type on the other schema, inv.customer, 1st schema table, 2nd table tran.order.
  
  then, when I declare my package.
  
  
  Procedure p_insertOrder
  (
  p_empid in customer.customerid%type
  p_orderid in tran.order.orderid%type
  );
  
  
  However, it gives me this error message
  
  PLS-00201: identifier 'tran.orde' must be declared.
  
  the following package is located in inv schema. so when I make reference to the customer table, I do not have the diagram for it.
  
  So what is the cause of this?
  
  
  
  ~ vincent.

  what grants do you have enabled on the table?

  Log in as tran or a dba and try:

  grant select on tran.order to inv;
  

  You can also create a public synonym so you don't have to precede the table with the schema name. Beware of the tables of the same name in your current schema if you do it well.

• Cannot see reverse data warehouses in the model

  Hi all
  
  I am trying to reverse both PeopleSoft custom defined in an Oracle database tables and bring them to ODI.
  However, even if the reversal of the process itself (standard and custom) doesn't give any errors, I can't see the data stores in the model.
  
  I connect to the Oracle database using a user id that is not sysadm. This user had only read access to the two tables and sys.dba_objects (initially, while doing a reversal on measure, it was an error which I understand that sys.dba_objects need to access) above.
  I am able to query and read data from tables using sql developer using this new user.
  
  I believe also that the topology has been set up properly and I could do a ping of the database by using the user successfully when you set the physical schema.
  
  Advice as to why I can't see data warehouses in the model even after the overwhelming success?
  Help any will be appreciated.
  
  Thanks in advance,
  Vivek

  Yes,

  The latter request must show any xxxx of the user table, and he did not.

  Take a look if the objects you need to reverse are not synonymous. If that's true, if they are public or private and the true owner of the table referenced by the synonym...

  Cezar Santos
  http://odiexperts.com

• Collection of data warehouses in the Script of commissioning

  Hi all

  First of all, I want to say thank you for all the help provided in these communities.  It has been very valuable in recent years.

  I had the opportunity to work on a configuration script treated for over a week now and have got almost ready for release but got stuck on the type of a basic element - collection of data warehouses.

  The idea is that we can use this to launch several environments identical demand - ripe for automation!

  We get the number of machines required is in $clcount, and $dslist can be equal to something like this...

  Name	FreeSpaceGB	CapacityGB
  SAN-ds-3	3,399.11	5,119.75
  SAN-ds-4	1,275.26	5,119.75
  SAN-ds-2	661.813	5,119.75
  SAN-ds-5	292.342	5,119.75
  SAN-ds-8	273.204	5,119.75

  My method works as long as the number of machines is less than the number of available data warehouses, but fails if the number of machines exceeds available data warehouses.

  $resources = Get-Cluster "Compute 1"
  $OSSpec = Get-OSCustomizationSpec "Base 2012 R2"
  $dslist = get-datastore | where {$_.Name -match "SAN" -and $_.FreeSpaceGB -gt 200} | Sort FreeSpaceGB -Descending
  $folder = Get-Folder "Lab 2"
  $clcount = "17"
  $envn = "Lab2-"
  $OSSpec = $OSSpec | New-OSCustomizationSpec -Name Temp-Spec -Type NonPersistent -Confirm:$false
  foreach ($num in 1..$clcount){
      $suffix = "{0:D2}" -f $num
      $datastore = $dslist[$num-1]
      $OSSpec = $OSSpec | Set-OSCustomizationSpec -NamingScheme fixed -NamingPrefix "APPCL$suffix"
      New-VM -Name $envn"APPCL"$suffix -Template $template -OSCustomizationSpec $OSSpec -Location $folder -ResourcePool $resources -Datastore $datastore
  }
  ##End build Client Machines
  $OSSpec | Remove-OSCustomizationSpec -Confirm:$false
  
  

  I know it would be easy to solve with the clusters and SDR data store, but I believe that would always choose the store of data with the most free space and you can see our environment could be a little unbalanced, so I am trying to build in a little more intelligence in the distribution of these machines in data warehouses.

  Any help or pointers in the right direction would be greatly appreciated!
  

  Use % (remainder of division) to transform $num into something that will be less than the size of option:

  $datastore = $dslist [$num % $dslist.count]

  Then change the ascending sort.

• PowerCLI script for DatastoreCluster, data warehouses and the size info, DataCenter, Clusters

  Hello - I am looking to remove the DatastoreClusters and then list data warehouses as well with their size (total size, used space, free space, put in service, uncommitted space) and the total number of virtual machines on this data store. I would also like to understand what data center and they are on clusters. Is this possible? I might want to limit what is displayed in data warehouses that are 13 percent of free space or less.

  Thank you

  LORRI

  Of course, try this way

  Get-Datastore.

  Select @{N = 'Center'; E={$_. Datacenter.Name}},

  @{N = "DSC"; E = {Get-DatastoreCluster - Datastore $_______ |} {{Select - ExpandProperty name}}.

  Name,CapacityGB,@{N='FreespaceGB'; E = {[math]: tour ($_.)} (FreespaceGB, 2)}},

  @{N = "ProvisionedSpaceGB"; E = {}

  [math]: Round (($_.)) ExtensionData.Summary.Capacity - $_. Extensiondata.Summary.FreeSpace + $_. ExtensionData.Summary.Uncommitted)/1GB,2)}}.

  @{N = "UnCommittedGB"; E = {[math]: tour ($_.)} ExtensionData.Summary.Uncommitted/1GB,2)}}.

  @{N = "VM"; E={$_. ExtensionData.VM.Count}} |

  Export Csv report.csv - NoTypeInformation - UseCulture

• Storage vmotion, between data warehouses when the block size is different

  Hi all

  I would like to know, is it possible to do a vmotion of storage between two data warehouses, when they have different block sizes. The case is as a former vmfs data store 3 which has been upgraded direct to vmfs5 there, but since it has been updated it maintains its own block size. While the newly created vmfs datastore 5 a block size of 1 MB.

  Thus, storage Vmotion will work in this case? It will fail OR will be with degraded performance?

  Finally, storage vmotion is possible even if you do not have a cluster DRS for storage?

  Thank you

  Yes you can!

  Check some info on the effects of block size: http://www.yellow-bricks.com/2011/02/18/blocksize-impact/

• Can you pass offline virtual machines between data warehouses using the 'Migration' with the basic Kit Essentials feature?

  I speak not of Essentials Plus vMotion between hosts or migration of VMS between hosts and data warehouses online. Just curious to know if its possible to off a virtual machine and click the button to migrate to another store of data with the basic Essentials bundle.

  Welcome to the community - Yes you can - it's what we call a cold migration.

• trying to create an ESXi data store on the local drive.  Configuring the host error: unable to update the disk partition information

  I'm a newbie on ESXi and don't know what it takes to get ESXi correctly partition my drive SATA 500 correctly.

  I will implement a laboratory unit to carry out tests for ESXi and ESXi is not quite correctly the disk partitioning or do not see a good partition in order to create a data store.

  This system was able to correctly identify and configure a data store on a small 80 GB seagate SATA disk, however, this isn't quite enough storage so I swapped the hard drive and tried to re - install ESXi on the new hd.

  I use a USB boot ESXi since and it is launched and configures the card intel pro1000 pci ethernet correctly.  also correctly the id of the cpu and memory.  everything seems fine and he is even able to see the hard drive.

  Here are some screenshots of the process that I go through to make my data store...

  on this photo-sous the column titled 'available' is 'none', also said, under the title 'san identifier' he said 'not applicable' - I guess that's not quite right?

  

  

  

  

  and disappointment - failure?

  

  I tried to go into the bios if there are some settings I need to do to get this hard drive set up... I don't understand enough about ESXi to find out why the drive is not found and configured correctly.  is this a bios problem w / my system or a problem of ESXi?

  pls help!

  You have generally not, but it might be interesting to start with something like a Linux live CD and then using gparted or other to wipe all the top partition information.

• The list of virtual machines, data warehouses and the folder name by cluster

  
  Hello!!  I hope someone can help me with a PowerCLI script that can pull the info from the object into a file, txt or csv.  In order to get our environment cleaned before our next year Dr. with MRS, I want a list showing each VM and the data store (s) in that it is the name of the folder in the virtual computers view and models.  We keep our VMs organized by creating folder names that correspond to the application running on the virtual machine.  I mention a SRM than last year because our protected groups matched groups of our table of 3PAR Rcopy.  However, we have added over 200 new virtual machines from this era and the members of my team essentially placed these new virtual machines on the first available data store that had enough free space.  Unfortunately, we are not using storage profiles... it's scheduled for next year.

  Information extracted would look like the following:

  ServerName Datastore folder name

  Server1 LUN0 ActiveDirectory

  Server2 LUN0 ActiveDirectory

  Serveur3 LUN1 ActiveDirectory

  Server4 LUN3 Argo

  Server5 LUN7 Argo

  LUN6 Lockbox Server6

  LUN5 Lockbox Server7

  Serveur8 LUN9 Citrix

  etc...

  Any help with the extraction of this info from vCenter would be greatly appreciated.

  Thank you

  Charles

  You can redirect the results to a CSV file, for example

  Get-VM |Select Name,@{N="Datastore";E={[string]::Join(',',(Get-Datastore -Id $_.DatastoreIdList | Select -ExpandProperty Name))}},@{N="Folder";E={$_.Folder.Name}} |Export-Csv C:\report.csv -NoTypeInformation -UseCulture
  

• Movement of data warehouses from the local storage to SAN virtual computer

  Hello

  I have a few VMs that must be moved on our SAN, they are on an ESX 3.5 stand-alone server.

  It seems that the best way to proceed would be to:

  1. turn off the VMs system.

  2. copy and paste all of their files on the SAN data store configuration.

  3. right click on the vmx files, add them to the ESX cluster.

  4. create a new ID when asked.

  5. turn on them and let it run.

  Am I missing tips here? In this way, I still have the original VMs back if something breaks down - they will have a new ID created and if all goes wrong, I can just stop them and the power on the 'old'.

  Any help/advice appreciated as (as always) here are important to keep servers to work correctly!

  rudybrewster wrote:

  Thnaks for the answers, I'll flat some points a bit.

  The reason why I want to do with a copy/paste is to keep the original files intact, if I vMotion them, I won't have the originals are I'm going?

  Stand alone ESX server is a different model, etc. to the cluster, so I don't think I can add in?

  Bascially, I need to be 100% sure that I can get these servers if something happens on copy - and I have thin, that my method is what?

  Yes, when you svMotion them, you can move them.

  You can add any model of a server to a cluster. What might not work is vMotion one guest from one host to another if the CPU do not match.

  If you want to keep the original files, copy them.

  AWo

• 5.5u2 ESXi host will not mount CF data warehouses

  I am the admin in a test lab, so many times I have to "make do" with what I have for the material.  I recently reassigned a R910 Dell with 64 GB memory in a 5.5u2 ESXi host.  It has some storage SAS (2.5 to) and some (CT 11) directly connected FC storage and some FC HBAs for use by VMs to send data to the tape library.

  Recently, we had a power failure, and this host does not reconnect to the CF storage when she returned to the top.  (Duty to "make do" with what I means not having is not the capabilities of UPS).  I can tell the host of HBA see it properly and sees the LUNS on RAID controllers, but refuses to mount.  I go through the add storage Wizard, and he sees that there is a store of data storage VMFS, but always refuses to mount.  I also tried to remove the redirection to the two FC HBA that have been set up for this purpose, but it made no difference.

  I have now three users unable to work because they cannot access their virtual machines on storage of this FC.  I can't even transfer them off to use the SAS storage form.

  I think it might be the cause file system damage, but I'm not sure.  Someone at - it suggestions?

  Have you ever tried to set up data warehouses from the command line (see, for example, http://kb.vmware.com/kb/1011387)?

  André

• Disk space reduced after deleting and creating SATA data warehouses

  I was experimenting with measurement feature multiple with a host ESXi 5.0 (build 515841), which has two 2 TB SATA drives connected to the motherboard SATA controller. For the test, the first hard drive was installed with a VMFS5 data store and the second disc was added as an additional measure. The ability to store data went up 3.62 to as expected (individual drives show up 1.81 TB in VMware). After the test, I deleted the data store to configure the drives as of separate data warehouses. The second disc correctly displays a 1.81 TB of available space, but the first drive shows only a maximum of 256 GB of available space. The structure of the disc shown before creating the data store on the first hard disk shows 1.81 TB of free space. Additional free space can be recovered without having to reinstall ESXi? Thank you.

  I didn't not experiment a lot with VMFS-5 me yet, but I have had a few discussions with other users. What they say, you can be able to increate the VMFS partition of size (in stages) by using partedUtil, and then run vmkfstools to cultivate the datatore. See for example Re: cannot increase the capacity of VMFS 5.54 data store

  With your layout of the partition, it would be s.th. as these two commands:

  partedUtil resize "/vmfs/devices/disks/vml.01000000002020202020204d4e313232304633304d41553544486974616368" 3 10229760 3907029167
  vmkfstools --growfs "/vmfs/devices/disks/vml.01000000002020202020204d4e313232304633304d41553544486974616368:3" "/vmfs/devices/disks/vml.01000000002020202020204d4e313232304633304d41553544486974616368:3"
  

  André

• Keep two very large synchronized data warehouses

  I look at the options to keep a very large (potentially 400GO) datastore TimesTen (11.2.2.5) in sync between a Production Server and [sleep].

  The replication was abandoned because it does not support compressed tables, or table types creates our closed code (without PKs not null) application

  1. I did some tests with smaller data warehouses for the indicative figures, and a store of 7.4 GB data (according to dssize) has resulted in a set of 35 GB of backup (using ttBackup - type fileIncrOrFull). This surge in volume should, and would it extrapolate to a 400 GB data store (2 TB backup set?)?
  2. I have seen that there are incremental backups, but to keep our watch as hot, we will restore these backups and what I had read and tested only a ttDestroy/ttRestore is possible, that is full restoration of the full DSN every time, which takes time. Am I missing a smarter way to do this?
  3. Y at - it other than our request to keep two data warehouses in the construction phase, all other tricks we can use to effectively keep the two synchronized data stores?
  4. Random last question - I see "datastore" and "database" (and to a certain extent, "DSN") apparently interchangeable - are they the same thing in TimesTen?

  Update: the 35 GB compress down with 7za to slightly more than 2.2 GB, but takes 5.5 hours to do this. If I take a fileFull stand-alone, it is only 7.4 GB on the disc and ends faster too.

  Thank you

  rmoff.

  Post edited by: rmoff - add additional details

  It must be a system of Exalytics, right? I ask this question because compressed tables are not allowed for use outside of a system of Exalytics...

  As you note, currently the replication is not possible in an Exalytics environment, but that is likely to change in the future and then he will certainly be the preferred mechanism for this. There is not really of another viable way to proceed otherwise than through the application.

  With regard to your questions:

  1. a backup consists mainly of file of the most recent checkpoint, more all the files/folders that are newer than this file logs. Thus, to reduce the size of a backup complete ensure

  that a checkpoint occurs (e.g. "call ttCkpt" a ttIsql session) just before starting the backup.

  2. No, only the restore is possible from an incremental backup set. Also note that due to the large amount of rollforward needed, restore a large incremental backup set can take quite a long time. Backup and restore are not really intended for this purpose.

  3. If you are unable to use replication, then a sort of application-level synchronization is your only option.

  4 data store and data mean the same thing - a physical TimesTen database. We prefer the database of the expression of our days; data store is a legacy term. A DSN is something different (Data Source Name) and should not be swapped with the data/database store. A DSN is a logical entity that defines the attributes of a database and how to connect. It is not the same as a database.

  Chris

• How to change alerts on data warehouses?

  Greetings! I have a situation where I know that one of my data stores will be almost full all the time but it never filling so I'm not worried to watch but there a mistake I want to disappear. On the other hand, I don't want to follow all the other data stores. The problem is that it seems that I can't include some data warehouses under the definition of an alert and another store of data under another definition. Does anyone know how do you allocate the alert definitions, some for specific data warehouses and another to monitor another data store? I am using vCenter Server 4.1.

  Thank you!

  Christopher Beard

  You can turn off the alarm level of vCenter, then go in your storages of data display in your inventory and facility alarms there. However, you will need to do this for each data store.

• Host does not see some data warehouses

  I add a new host in a cluster of ESX 4.  ISCSI Storage Adapter on all hosts (old and new) detects all available Lun, 10 in total.  However, 2 of the LUNS appear not in the list of data stores in the new host.  Thus, guests see 10 stores of data.  Guests are running live virtual machines that reside on the 2 "missing" data warehouses.  The new host sees only 8 of the 10 stores of data.

  I see the text "detected can be a snapshot" and "not open device"4c19dd2e-f64dfcc4-f94f-a4badb4fcdb6"to probe: no such target on the map.

  "in/var/log/vmkernel.  What to do with these averages of message?

  4126) LVM: 7165: found device naa.60a98000572d4374433450444335486d:1 can get to be a snapshot:

  18 June-15:47:28 corpesx2 vmkernel: 0:00:03:39.125 cpu16:4126) LVM: 7172: questioned disk ID:

  18 June-15:47:28 corpesx2 vmkernel: 0:00:03:39.226 cpu16:4126) Vol3: 1488: could not open device "4c19dd2e-f64dfcc4-f94f-a4badb4fcdb6" to probe: no such target on the map

  18 June-15:47:28 corpesx2 vmkernel: 0:00:03:39.226 cpu16:4126) Vol3: 608: could not open device "4c19dd2e-f64dfcc4-f94f-a4badb4fcdb6" open volume: no such target on the map

  18 June-15:47:28 corpesx2 vmkernel: 0:00:03:39.226 cpu16:4126) SFS: 3702: pilot no. FS claimed device '4c19dd2e-f64dfcc4-f94f-a4badb4fcdb6': unsupported

  June 18 at 15:47:30 corpesx2 vmkernel: 0:00:03:40.594 cpu2:4098) NMP: nmp_CompleteCommandForPath: command 0 x 12 (0x410007114b80) for device NMP 'mpx.vmhba1:C0:T0:L0' failed on the physical path 'vmhba1:C0:T0:L0' H:0 x 0 D:0 x 2 P:0 x 0 valid sense data: 0 x 5 0 x 24 0 x 0.

  June 18 at 15:47:30 corpesx2 vmkernel: 0:00:03:40.594 cpu2:4098) ScsiDeviceIO: 747: command 0 x 12 for the device "mpx.vmhba1:C0:T0:L0" has no sense H:0 x 0 D:0 x 2 P:0 0 valid x-data: 0 x 5 0 24 x 0 x 0.

  I see the text "detected to be a snapshot" and "Could not open device.

  "4c19dd2e-f64dfcc4-f94f-a4badb4fcdb6" to probe: no such target on

  adapter

  "in/var/log/vmkernel.  What to do with these averages of message?

  It could be due to various reasons:

  1. lost on the host partition table.  Check with fdisk-lu < devname >

  2 LUNS can be detected as snapshot.  -> esxcfg-volumes - l should show snapshot volumes.

  esxcfg-volumes - M < Datastore UUID >

  This will force up the volume.

  vmkfstools v

  to refresh the storage.

  then if all goes well, you should be good to go.

  3. corruption of LUN. -> Please contact VMware support or support from the SAN vendor to fix it.

  Please consider awarding point if this information is useful.