Host does not see some data warehouses

Similar Questions

• 5.5u2 ESXi host will not mount CF data warehouses

  I am the admin in a test lab, so many times I have to "make do" with what I have for the material.  I recently reassigned a R910 Dell with 64 GB memory in a 5.5u2 ESXi host.  It has some storage SAS (2.5 to) and some (CT 11) directly connected FC storage and some FC HBAs for use by VMs to send data to the tape library.

  Recently, we had a power failure, and this host does not reconnect to the CF storage when she returned to the top.  (Duty to "make do" with what I means not having is not the capabilities of UPS).  I can tell the host of HBA see it properly and sees the LUNS on RAID controllers, but refuses to mount.  I go through the add storage Wizard, and he sees that there is a store of data storage VMFS, but always refuses to mount.  I also tried to remove the redirection to the two FC HBA that have been set up for this purpose, but it made no difference.

  I have now three users unable to work because they cannot access their virtual machines on storage of this FC.  I can't even transfer them off to use the SAS storage form.

  I think it might be the cause file system damage, but I'm not sure.  Someone at - it suggestions?

  Have you ever tried to set up data warehouses from the command line (see, for example, http://kb.vmware.com/kb/1011387)?

  André

• Windows 7 does not see some games or DVD discs in my DVD - RW drive

  I'm using Windows 7 Home Edition premium for my office, and all of a sudden she refuses to see my game or DVD discs when I put them in the drive. He will see my DVD - RW discs, but nothing else. The games I ran before with no problem at all, and drives that I'm trying will play fine on my Windows XP laptop, so I'm not sure what has changed to make it act like this.

  It looked like from this, after that I burned a disc of pictures of family once, but I'm not positive.

  I tried to uninstall the drivers for the DVD - RW, and reinstall, I don't know what else to do.

  Hi Emiley Tomsen,

  Please return to the article below and review the troubleshooting I would fix it myself :

  http://support.Microsoft.com/kb/982116

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Directory Manager does not see SOME users

  Unity 4.04 SR1 on a CCM 4.12 for a reason any CERTAIN users are not in the Directory Manager.

  We put them as indicated, I tried to remove / save and re check / except that option.

  I confirmed the name DTMF in the Subscriber table is right, but it is not yet that users.

  any ideas?

  Open saweb to these Subscriber pages and make sure that they have a name registered.

• Comments see host on the network, but the host does not see comments

  Hi all

  I'm running Windows 7 Pro as host and have XP as a guest.  I set up a new virtual network (as I saw in another post here) and made sure both host and guest get correct IP addresses.

  The guest can ping on the host, but the host cannot ping the prompt.  I even moved the new VM adapter above the other ones on the host and which still got nothing.

  Any thoughts?

  Thank you

  Craigbert

  > Any thoughts?

  Firewall settings? (turn off for tests)

  Is it time out or say inaccessible?

• single network host does not

  Hello

  the only network of my host does not work for a few days. Before that, he worked.
  I upgraded to 4.0.1 4.0.2 but I don't know if this is the reason.
  Striking is the IP address of the host. That was before the 192.168.106.1. Now, it's in the link-local area.
  My data:
  VMware Player build 4.0.2
  Host: Windows 7 Professional
  Comments: Ubuntu 10.04 LTE, VMware Tools up to date, static ip 192.168.106.12

  ipconfig/all

  Windows IP configuration

  Ethernet VMware Network adapter adapt VMnet1:

  Suffix-Verbindungsspezifisches DNS:

  ... Description: VMware Virtual Ethernet adapt for VMnet1

  Physical address: 00-50-56-C0-00-01

  DHCP aktiviert...: Nein

  Autokonfiguration aktiviert...: Ja

  Verbindungslokale IPv6-address. : fe80::cdae:b6fb:1b1a:3ceb % 23 (Bevorzugt)

  IPv4-address (Auto. (Configuration): 169.254.60.235 (Bevorzugt)

  Subpattern...: 255.255.0.0

  Standardgateway.... :

  DHCPv6-IOOKING...: 352342102

  DHCPv6-Client-DUID...: 00-01-00-01-15-A7-9D-90-F0-DE-F1-70-70-68

  DNS server: fec0:0:0:ffff:1 1%

  FEC0:0:0:FFFF:2 1%

  FEC0:0:0:FFFF:3 1%

  NetBIOS & #129; BER TCP/IP...: Aktiviert

  I agree with the other poster. Please check if the 'VMware VMnet DHCP Service' (vmnetdhcp.exe) is running. You can also try to do a "Restore Defaults" to see if that fixes the problem.

  André

• MO does not see my HD Mactor. But before...

  Hello

  I have 1 TB HD Mactor. And I used it as TimeMachine for a long time. But after the last software update, MacBook started does not see the external hard drive. And he said: "the disk you inserted is not readable by this computer. What can I do? I don't want to lose the datas in HD using disk utility.

  Please help me.

  Kind regards

  ......

  All hard disks have finishes by fail.  Which may occur to your 1 TB HDD Mactor.

  Save your MBP on another HARD disk.

  Then look for hardware problems.  Using different USB ports.  Try different USB cables.  Remove the HARD drive and install in another known functional pregnant.  Test it on another Mac.

  If no success, then test it using disk utility > first aid.

  Ciao.

• Firefox 4 does not save form data after sending form and pressing the previous button

  Firefox 4 does not save form data after sending form and pressing the back button... It's very annoying that it erases all data. It worked fine on FF3.

  See:

  • Firefox or tools > Options > privacy > History: "don't forget to search and form history."
  • Check if Firefox automatically fills in forms

• Tecra M5 does not record the date and time - battery RTC or CMOS checksum is inconsistent

  My Tecra M5 PTM50E reverend new does not record the date and time. I loaded RTC battery for 8 hours when electricity is on in the said user's manual. I don't know where is the problem. The BIOS settings are respect after power is on.

  When I change any value in the BIOS, the changes are saved properly but date & time system restored to their value 01/01/2000, 00:00 every time when I get out of turning off more of 2-3 min. Message "RTC battery is low or CMOS checksum is inconsistent.

  Press [F1] to set Date/time"does not appear when I power on the computer. Any suggestions?

  Hi guys

  Usually this problem appears only if the CMOS (real time clock) battery is empty or corrupted.
  The real time clock battery powers the internal clock in real time and calendar. It also maintains the system configuration. If the RTC battery is completely discharged, the system loses these data and the real-time clock. In this case, the message RTC battery is low or CMOS checksum is inconsistent appears.

  So I see only two possibilities:
  Either you will charge the battery for real-time clock, or you ask the technician for replacement.

  Generally, the battery must be completely charged after 8-9 hoers but try to connect the laptop to the power adapter for a long time.
  If it will not help solve the problem if you contact the ASP for the RTC battery replacement.

• RALink RT3290 does not "see" the 5 GHz networks (802.11n)

  I just bought a HP Pavilion 17 Notebook PC (number of product F9M00UAR #ABA) with victory 8.1 x 64 installed and the wireless card does not 'see' any 802.11n networks.  The driver installed is 5.0.37.0 with a date of 25/11/2013.

  I've seen problems with upgrades to 8.1 affecting the adapter, but nothing works not properly out of the box on a new machine from 8.1 to WIN.  Can anyone offer any suggestions on how to force it to see 802.11n?

  Thank you

  Mark

  Hello:

  The WLAN RT3290 card is only a single band (2.4 GHz).  He can not find the 5.0 GHz band.

  Whenever you see a suffix of bgn on a description of the wireless card, it means that it is a map only single band (2.4 GHz).

  Cards N whose suffixes ending with abgn or agn wireless dual band (2.4 GHz/5.0 GHz).

• my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.

  my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.

  HI - try the following steps:

  On your iPhone close application of activity and also, if it runs in the background, the health app (you can close open apps, including the app shows):

  -Double-click the Home button, and then drag upward on each of the app previews to close.

  It can help to restart your iPhone and your watch. Turn on both devices off the power together first, and then restart your iPhone before restarting your watch:

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

  -To switch on: press and hold the side button until you see the Apple logo.

  If this does not resolve the problem, try next disconnect and rematching of your watch:

  -L'app shows on your iPhone shows backups automatically, including a new when the unpairing via the application.

  -Choose to restore the watch (backup restore) when provided the opportunity during the whole.

  -Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).

  - Pairing your Apple Watch and Support Apple - iPhone

  - Set up your Apple Watch - Apple Support

• ENVY 4520: Computer does not see section scanner WANT

  Last weekend, I bought a 4520 want TO replace a malfunctioning Lexmark all in one. I quickly learned that the software for this printer avaulable was not available for Mac OS X 10.7.5 (Lion). However, I followed the instructions on the Apple and this site and downloaded the appropriate drivers for the 4500 series. I am able to print wireless from my Mac, but when I attempy yo scan, the 4520 does not appear. In fact, printing and control panel Scan sees not the 4520 otherwise than as a printer no scan option available. Utility HP 'sees' the fevice but offers no adjustment of parameters. The application of scanning HP, does not see it no more.

  While printing is the main reason I bought this unit, the scan function is also valuable and I would like to be able to use it. Of course the current HP software does not support my Mac and OS (Lion) - are there any ear; first versions of installation scanning software partitions. If not, do you have suggestions for () maybe) generic software that will allow me to use the scanner?

  -colin

  Hi Colin,

  Sorry for the frustration you must be feeling.  I did some checking and confirmed that HP only provides drivers scan of your product on OS X 10.8 and later versions.  This product also supports the Apple AirPrint (scan) functionality, which allows you to scan without HP software, but still this support is only available on OS X 10.10 and later versions.

  I am not familiar with the features of 3rd party scan applications.  My only suggestion would be to consider upgrading the version of the OS on your Mac (if possible) because this opens up your options considerably.

• MAX does not see the cards as DAQmx

  I have three cards OR in my machine: PCI-6602, 6120-PCI and PCI-MIO-16-4 (aka PCI-6040E).  For some reason any my measurement & automation explore (MAX) does not see them I expect.  He sees the card PCI - MIO in the DAQmx and NOR-traditional DAQ records, but he sees that the other two in the traditional NO-DAQ folder.  I should be seeing them all DAQmx AFAIK.  I read in a post on this forum that I can be a corrupted database MAX; so, I renamed and restarted does not.  I have applications that I programmed in Delphi that see, acess and use all three cards using traditional DAQ, so I know they work, at least to some extent.  When I use LabVIEW, he sees only the PCI - MIO map for operations of DAQmx and I'd like to find a way to make all three of them consider DAQmx.  I believe all three cards are compatible with traditional DAQ or DAQmx.  My installed software versions are: LabVIEW 7.0, MAX 4.2.1.3001, NOR-Spy 2.0.0.16, 1.70 OR-488. 2 NOR-DAQmx 7.0.7f0, NOR-PAL 2.0.0 OR-SWITCH 2.00.49156, NI-VISA 3.1, NOR-DAQ 7.4.4f7 traditional (I also tried 6.9.3f4 version without success).

  I hope that it is something with a simple fix.

  Thanks in advance to those who take the time to read and respond to this message.

  Thank you

  Neil

  Did you look in the Readme for DAQmx 7.0? It was the first version and these devices were not yet supported. The latest version of DAQmx you can perform with LabVIEW 7.0 is version 8.1. These cards are listed as being supported.

• HP 13 X 2 Split does not see the Micro HD card

  I got no problem with Micro HD card.  I use it to back up my work.  All suddenly the computer does "not see" it.  I tried to get out, but it does not "Spring".  Two part question, how do you remove and reinsert the card.  Usually, the map is to push and it comes out for the withdrawal.  Secondly, there is a setting that needs to be reset.  No changes have been made to the system.  The card just stop working.

  Windows 8.1

  Processor Processor Intet Core i3-4020Y @ 1.30 GHz

  Installed memory 4.00 GB

  Process system Type 64-bit x 64

  Pen and touch: Ful window Touch support with 10 points of contact

  Hey @Sugarwood ,

  Welcome to the HP Forums!

  If the card was already working the first thing that we should try is a system restore. A system restore back the PC to an earlier date without deleting your personal files. It will however updates to software and the driver of the room, uninstall any software recently installed after the date selected.

  Do to run a system restore, please see the following guide: use Microsoft System Restore (Windows 8). Try to restore to be for it started and let me know if it works.

  To remove the microSD card: you are right. Based on the microSD card should eject as if spring loaded.

  Thank you!

• Does anyone know how to connect a Garmin GPS to the EOS 7 d? The camera does not see.

  When I plug in my Garmin GPS on my EOS 7 d and go into the GPS settings in the menu. The camera does not see all I get is "GPS not connected indication." The GPS turned on and functional. Someone at - it ideas?

  Once I had an application that you had photographed the display of a GPS device (the type that a rider could use because they observe "breadcrumbs" trail of your itinerary) on #1 chassis (they wanted to just make sure that you have a picture of the time on the GPS display.

  You then go about your day taking photos with the GPS running indepdently.

  At the end of the day, you import the images and it asks you to enter the time displayed on the first photo.  It uses the display of GPS time and calculates the offset of the time, the camera recorded in the EXIF data (just in case the clocks were not perfectly synchronized).  Then she uses the breadcrumbs on the GPS track and apply the GPS position, data for each photo from your camera roll.

  It was a bit complicated and app tried to take over your App "photo management" (which I didn't... "I wanted just the position data added to the existing images), but it worked.

  The fact is... I was able to add correction of position information to each photo and it did not require actually integrate the GPS to the camera (it was quite after the fact).

  Today, I own the module GPS Canon (MUCH more convenient), so I don't deal with that more.

  hikeray2 wrote:

  When I plug in my Garmin GPS on my EOS 7 d and go into the GPS settings in the menu. The camera does not see all I get is "GPS not connected indication." The GPS turned on and functional. Someone at - it ideas?