ESXi reboot loop after the screen "Loading ISO VMware"

Similar Questions

• Reboot loop after the configuration of the Windows updates

  original title: configuration to update windows, remains at 0% then restarts vista, now stuck in an endless loop, I can't break out of.

  my system is set up as a dual boot... my being main vista home...

  the other day I did my update systematic of windows Vista, everything went well...

  you had to do a reboot to complete the updates. everything went as usual...

  Therefore, curiosity had me look at the optional updates available on the update page, one of them being a graphic driver for my card, I chose that and 2 other small...

  to restart, I received the message "update configuration"...

  Updates 1 & 2 set up, but on the update 3 of 3, he remained on 0% complete... after a minute or 2, just rebooted system... I thought "seems normal.

  However, the reboot, it is came with, configuration of update 3/3, stayed on 0%, then restarted once more...

  It will not be completed, it maintains simply browse the updated 3/restart cycle configuration...

  I tried to boot from a system medion recovery disk, I tried checking a problem to statup, he reported none found...

  I tried a system restore, it had only one, just before the updates, but on trials, all just by me again at the beginning of the update configuration 1 part 3, ending with the update 3 do a repeat of the cycle above...

  I tried a chkdsk /f /r on my vista to boot from my recovery disc... it took forever because it was a 1000 GB drive, but no problem detected...

  is there any way I can get out of this endless configure update/restart loop as I don't want to do a complete vista reinstall from my recovery disc

  Once you have started with the Vista DVD / disque disk recovery, select Service Options, and then select command prompt (no admin password needed in this way)

  Now type:

  C: (or any directory of your system files are located)

  CD windows/winsxs
  del pending.xml

  Then close and restart.  I hope that the problem will be solved.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The Windows Vista startup disk crashes after the screen "loading files".

  I am trying to install Windows Vista on a new computer. The computer recognizes the boot disk and I can go beyond the "Loading files" screen, but when I get to the screen that looks like the standard login screen, the menu to install Windows never appears. The display will be just what it was. Any help would be appreciated.

  Hello Trey

  I suggest you see if there is an update of the bios for the motherboard. You can also check out the link below and see the suggestion given by Tim Quan.
  http://social.technet.Microsoft.com/forums/en-CA/itprovistadeployment/thread/6cb6510d-3e4f-4611-ba73-7e68fc4aa0a6

• Blue screen on Vista after the Green loading bar

  After turning on the computer, the message "loading Windows files" with a white bar in below appears, then the normal green roof bar. Shortly after, the screen becomes fast black, then blue. The mouse arrow stays on the screen and nothing happens, no text appears on the screen. Help! I am somewhat a novice in computer science.

  If Ctrl + Alt + Delete does not work, then there is a deep problem. As we
  Unable to access the computer in any way, we need to use external tools. Are your
  saved documents? You have a CD that came with the computer - which
  What do recovery or Vista? What brand is your computer?
   
  Read more and note the difference between having a CD or not.
  http://www.bleepingcomputer.com/tutorials/tutorial142.html
   
  When you get to the dialog where you choose the tool you want to choose the command
  Command prompt and type
  sfc/scannow
   
  If it does not help choose the system restore.
  --
  ..
  --
  "longy59" wrote in message news: ad7b62a0-f8fb-46c 7-976b - 9759e21b6622...
  > Ctrl + Alt + Del will not work either
   
   

• Problem in reboot loop after updates.

  I have windows XP on an Asus A8V-E-SE motherboard has developed a problem in reboot loop after updates.  It will not go in safe mode either.  Stop at a display of the driver.  I used the recovery console using the XP cd and you can see the update directories in the systemroot folder.  I followed the instructions in the forum to uninstall every update by accessing commands back to the subdirectory spuninst update and then run "Batch spuninst.txt.  I get a bunch of 'access denied' messages for each of them (varies in amount of "access denied" messages by everyone but consistent for each.)  It's not like the batch uninstall for the update does not work.  I tried to uninstall all updates yesterday 10/02/10 (I had 10) even with the "access denied" messages, but it still will not initialize properly.  No way to move the access denied message?

  See the RESPONSE (by Kevin Hau) message in this thread: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/73cea559-ebbd-4274-96bc-e292b69f2fd1

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Stopping everything in a loop after the last element of a 2D array

  How to stop a while loop after the last element of a 2d array.  I tried an uninitialized matrix wiring constant and comparison with table 2d, which has been indexed to a 1 d table, but that did not work.

  Hahaha, Hey, it's true what they say, a picture is worth a thousand words

  

• stop all loop after the last element of the array

  I want to stop a while loop after the last element of an array. I can't use table size because the size of the array can change within the program.  What should I do?

  Why not use the function empty array like this...?

  

• Why preview iOS app is stuck on the screen "Loading your image?

  I have a PSD is open in Photoshop, but iOS Preview application is always stuck on the screen "Loading your image.

  We fixed some bugs related to the screen "Loading your image" displays forever.  To get the patch, install the latest updates of Photoshop CC 2015. If you have Photoshop 2015.1 and you still see the problem, please contact us at [email protected].  It would be awesome if we could get your PSD and if you could provide reproducible measures or a video of your actions in Photoshop screenshot when the problem occurs.  If the Photoshop update does not resolve the problem, the only solution is to save the PSD > close the PSD > then re - open the PSD.

• I'm stuck in reboot loop after trying to install one of the service packs, my cd rom is not working and I don't have a windows cd anyway, I tried to disable automatic reboot, but it does not work, I am running vista

  get service pack was not installed recovery changes and restart without end, once more I have no cd of windows and my rom is not working anyway, it really is _ me off, my computer was useless for days now and I have a very important job out there which is essential to my work. Thanks a lot for windows, I'll be switching os very soon

  Hi Asdlfjasdfjlasdf,

  How did you install ServicePack initially?

  You can try to start safe mode and try to perform a system restore.

  Step 1:

  For a safe boot, you can follow the below given steps:

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the Start button, click the arrow next to the button lock and then click on restart.

  2. do one of the following:

  a. If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  b. If your computer has multiple operating systems, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  3. in the display Advanced Startup Options, use the arrow keys to select the option of safe mode you want and press ENTER. For more information about the options, see startup options (including safe mode).

  4 log your computer with a user account with administrator rights.

  When your computer is in safe mode, you will see marked Safe Mode in the corners of the screen. To leave safe mode, restart your computer and let Windows start normally.

  If you are able to boot to the desktop in safe mode try doing a restore of the system at a point when the computer was working fine.

  For more information on Safe Mode, follow the link below:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next

  4. click on finish

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  For more information, please follow the below given link:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212/

  After you perform a restore of the system try to boot into normal mode and then download the standalone vista service pack and try to install.

  How to obtain the latest Windows Vista service pack

  http://support.Microsoft.com/kb/935791

  Once it is finished downloading the pack of autonomous before installing the service pack disable security software, the system n clean boot, and then install the stand-alone pack. Once the installation is complete normal startup mode and re activate the security software.

  If you are not able to perform the above steps then you will need to take your computer to the technical workshop and get it rectified.

  The steps to perform a clean boot are given below:

  1 log on to the computer using an account with administrator rights

  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue

  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

  Once you restart to try Office Outlook and see if you get the same error message. If not then follow the divide and conquer method mentioned in the article about which program is causing the problem.

  For more information about the clean boot, follow the below given link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  When you have completed the installation of the service pack, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Reboot loop after integrated at startup

  I searched for nearly two hours on the net looking for a way to solve this problem and I did not find anything, so I hope that if I post my own situation, I'll help.

  My laptop was not entitled to the left, so I plugged in the charger before turning on. While she has been commissioning, more precisely on the loading screen (you know, the green/yellow bar with "Microsoft collaboration" or something like that below), I accidentally pulled the charger out and it is turned off. Replace, it works again and I received a message (I'm sorry I don't remember the message itself, I don't have a lot of attention at the time) it gave me two options, I could either start windows normally or repair the system. I chose the system repair because I thought I could have damaged the phone somehow. So he asked me to do a system restore and I did it, it was restarted, loaded all the way to the Office and just as I was about to go about my business, a blue screen with white flashed writing for a fraction of a second (I couldn't read at all) and it restarts again.

  This time, he gave me a new black screen sent me three Mode options safe mode (Safe Mode, with networking SM, SM with command Menu), and then start windows normally. I started windows normally and it happened all over again.

  Now, I'm in Mode safe mode with networking. Everything works perfectly well in Mode safe.

  I have no CD or whatever this is supplied with the laptop, as it was given to me by a person around a year ago.

  I tried to access the Mode safe via the F8 option as well, just to see if something would be no different, but that didn't work either.

  Anyone know how I can go about fixing myself? ANY help apreciated if you really! :)

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Yoga - Thinkpad receiver of messages shortcut hot keys 30% CPU use and after the screen lock or sleep

  Hello! After returning from standby or locking screen, a process called 'Receiver of Thinkpad messages for shortcut shortcut keys' begins to use about 30% of the CPU. Time to go upo to battery of 60 to 70 degrees is running out very quickly. This process does not stop until I finish using the Task Manager. The end in this way, once it restarts even if I use sleep or lock the screen. Need help with this!

  I do not have this problem as a month ago or not. Has probably seen the day after some updates.

  

  On the edge of the T series, there is an update for this: https://forums.lenovo.com/t5/T400-T500-and-newer-T-series/t540p-high-cpu-usage-by-shtctky-exe-ThinkP...

  I installed on the yoga. After the first reboot, a program called 'tposd.exe' used about 30% of cpu. I thought that this update does not work. But after the second restart that is not more. Shtctky.exe is not also using the cpu after sleep or lock. So I think we have a solution.

• Computer does not start after the screen goes blank & Compaq.

  Hello

  A few weeks ago, I turned on my PC and it showed at the Compaq screen and then went to a blank screen & would not respond. I held the switch button to turn it off and after 4 attempts, it start fine. Next time, it took 20 attempts to initialize and now it does not start, it will be maybe if I try like 100 times he can do... The problem is when the Compaq screen comes up it comes only for like a second so I know that it does not start, if the Compaq screen stays for a few seconds as 3 + I know it will load windows and start.

  History > the computer originally had XP and has been replaced with VISTA memory was 2 * 512MB, but it was a bit slow and I was advised to upgrade. I bought 2 * 1 GB memory and put it in my PC a few months there may be 5 + had no problem so far.

  I tried the following:

  Remove the memory and replace it. Remove the 2 * 1 GB of memory and its replacement by the Moose 2 * 512MB to check if the memory is at fault.

  Cleaning of the dust around the fan (at this point, I removed the fan over the CPU and cleaned the thermal compound from the CPU to make it nice and shiny, only tried to start one time after that for a few seconds heard blowing fan and turend it took off. Depuis_lors, I realized that it wasn't just muck and had a purpose na derwiche put a little more on)

  Remove the battery of the BIOS for half a day

  Move jumpers CMOS from1, 2 to 2, 3 positions

  I can not get into the same if BIOS start and hold F1 he will show me the BIOS for a second and then go to a black screen.

  Specifications of the computer

  Compaq Presario SR1629UK desktop PC

  Details can be found in the following link

  http://support.HP.com/us-en/document/c00579251

  Your help would me much appreciated...

  Hi guys,.

  Thanks for your help, I wanted to just give you a batch update. After the grueling process of verifying the destop, memory suppression, cleaning it & all the other techo checks. I gave my pc to somone to look to the he tried not to turn on he opened it removed cleaning my thermal paste back on and told me it was working fine.

  When I bought home all happy, I realized that I had the same problem, I borrowed another monitor and found it worked well! So the question is with my monitor, if anyone has the same problem first check another monitor.

• Crash of Windows Vista after the SCREEN of HOME Toshiba

  Greetings,

  My father work laptop, a Toshiba Satellite L300D, running on Windows Vista, seems to have fallen, and it is promised (because he recently ordered a new laptop) that if I fix it it gives me.

  The problem is that as soon as the laptop turns on, after the start of toshiba, but before the vista screen start loading screen, the system stops and everything is white '_' in the top left corner that flashes and disappears, leaving me with an empty black screen. I tried all below, in vain.

  • Press F8, no matter how long, when and how many times, seems to have no effect. After pressing it enough times, the laptop starts beeping for a second every time I press another key.
  • Removing the battery and pressing the power button for 60 seconds seem to have no use either.
  • The recovery disks do not work. After that they load, the screen empty boring, with the small '_' rises again.

  Please note that before any loading screen, it crashes. I tried going in the system (by pressing F2) Setup and see if there is a way of fixing it. I don't see a possible solution.

  Help, please!

  Create a Ubuntu Live CD ( http://www.ubuntu.com/desktop/get-ubuntu/download ) put it in your CD-ROM drive, and then try to start with it (go to the start menu, use the arrow keys and enter to select your CD-ROM drive), and then selecttry without any change to your computer.

  If you can boot from this summer with success, it means that it is certainly a software or a hard drive problem.
  replace the hard drive will correct these two questions (you will need to get a new operating system) or you can try to clean the drive with a live Ubuntu CD and just buy a new OS (or use ubuntu).

  to retrieve all the files you need are on the disk, read this article http://www.howtogeek.com/howto/15761/recover-data-like-a-forensics-expert-using-an-ubuntu-live-cd/

  teengeek.freehostingcloud.com

• Reboot loop after a Hotsync operation

  Help, please!  I had to replace my 700 p (Sprint) with an another 700 p and when I went to sync the new phone, after that the synchronization has been completed, the phone went into a reboot loop.  It's like a soft reset.  The only way I can get it to stop is to do a hard reset.  I did the hard reset and resynchronize a certain number of times, but the phone was still in a loop.  Any ideas on what's going on?  What is a 'new' bad phone?

  Hard reset rename old files backup folder. THEN synchronize. (C:/program files/Palm / * hotsync username/backup)

  Message relates to: None

• Computer does not start after the screen of the bios, Compaq Presario SR1023WM

  Ok. Trying to fix a friend's computer and seem to have met a strange barrier.

  Problem: The computer does not start after the bios screen.

  Details: When you turn on the computer, the compaq logo with intel inside is and has the < F1 Setup > and < F10 System Recovery > options listed as well.  And that's it as far as the computer becomes.  After that the computer just locked up, no work of buttons on the keyboard lights keyboard ect ect.  I tried the puree on the F1 key, as soon as I turn on the computer and I can handle so he can say * entering setup * but it freezes again after this point.  I already tried to eliminate the possible sources of the problem, removed all expansion cards, HDD and Dvd Rom module only disconnected, only memory (256 MB ddr 2700), power, vga and keyboard connected.  Ive also used the jumper on the motherboard to clear the cmos, hoping that would solve the problem without success.  I tried using a different memory stick and different memory as well...  Tried to use both a ps2 and a usb keyboard... Ive even tried pulling the rider for the protection of the bios password (even if she did not have a password on it, just try everything I can think of).

  The installed bios version is 3.1, and that's all that I know on the computer at this point, except that the website tells me to him.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=411354 & LC = on & CC = US & DLC = in & Submit.y = 5 & Submit.x = 3 & lang = to & CC = US <-link to the Web page for the model #.

  I'm basically at a loss on this one, so if someone feels scroll line-by-line of their brains on this one, I'd be very happy.

  I have a pretty strong understanding of computer repair, so feel free to give me something to try.

  If you need more information out of me, let me know as well.

  Try to clear the CMOS again but this time remove CMOS battery and hold the power button on a few seconds. Replace the battery, then try to start back to the top.

  At the back of the pc is the condition of the PSU led green or flashing?