Esxi4 + iSCSI crash test trouble

Similar Questions

• Using NI CompactDAQ for helmet safety Crash Test - case study OR

  Hi all

  I have a question about the counter function in LabVIEW. The example below shows a case study for a test sefaty helmet using CompactDAQ.

  http://sine.NI.com/cs/app/doc/p/ID/CS-785

  They say:

  The helmet is declining, a sensor passes through a barrier of speed, as we use the counter/timer function to measure the speed of helmet just before impact. This triggers the data acquisition system, that measure the acceleration that the head feels upon impact.

  My question is: if they used a photoeletric sensor, what is the purpose of using a meter? Why don't you just simulate the relaxation of trigger.vi DAQmx early?

  I guess that the counter/timer function is to measure the elapsed time between two positions: there should be two-door sensor? To calculate the speed, you can divide the distance between the two doors with the passage of time.

• Data Plug In required format EV5 NHTSA crash test data

  I was hoping that someone could make or link me to a Plug In data for this data type:

  

  The link to the site is here:http://www-nrd.nhtsa.dot.gov/database/aspx/vehdb/testtabledetails.aspx?LJC=7481&existphoto=Y&p_tstno...

  Thank you very much

  Hello Wormspur,

  I have attached a beta version of our NHTSA EV5 use for you.

  To install:

  1. Please check out the attached ZIP file
  
  
  2. Double-click the "NHTSA_EV5.uri".
  
  
  3. The use will be installed and report success
  
  
  4. Open DIAdem, and you should be able to use the EV5 files just like any other DIAdem supported file format of data DIAdem

  If you have any comments on this use, it would be much appreciated.

  Best regards

  Otmar

• data stores configuration and target iSCSI in VMware 5.5U1

  I work inside my lab at home where I have the configuration box a CentOS 6.5 to serve to an iSCSI target. Shows the current configuration:

  [root@localhost ~] # tgtadm - lld iscsi - op show - target mode

  Target 1: iqn.2012 - 10 .cpd .net: san.target01

  System information:

  Pilot: iscsi

  Status: ready

  I_T nexus information:

  Information about the LUN:

  LUN: 0

  Type: controller

  SCSI ID: EIT 00010000

  SCSI SN: beaf10

  Size: 0 MB, size of blocks: 1

  Online: Yes

  Removable media: no

  Prohibit deletion: No.

  ReadOnly: No.

  Type of backup store: null

  Path to store backup: no

  Flags of magazine rack:

  MON: 1

  Type: disc

  SCSI ID: EIT 00010001

  SCSI SN: beaf11

  Size: 268435 MB, block size: 512

  Online: Yes

  Removable media: no

  Prohibit deletion: No.

  ReadOnly: No.

  Type of backup store: rdwr

  Support store path: / dev/sdc

  Flags of magazine rack:

  Account information:

  ACL information:

  192.168.1.200

  192.168.1.201

  Initially, I had only a single device defined within the iqn.2012 - 10 .cpd .net: san.target01 and I was able to create a data store on the ESXi hosts that I have running in my lab. I then added a second disk (LUN 1 above), but I still show that the possibility of having the original data store. When I look at the "storage adapters" on another host, details the software iSCSI card show 1 target connected, 2 devices and 2-way. If I should not be able to mount MON 1 as a second data within the host store?

  I don't use iSCSI anywhere in production and only play with it so that I can familiarize myself with the portion of iSCSI for test VCP5-VTC. Any help would be greatly appreciated. Thank you.

  Has proved to be a problem with tgtd. I actually had to reboot the server to get exports to work properly - the normal command "tgtd restart service" has been leaving some kind of autour artifacts that prevented VMware to see the changes properly.

• ESXi4 server on RAID array

  Hi all

  I set up a server of esxi4 as a test centre in our society.

  the installation of thin base - I installed the server on a usb memory

  stick and I can connect to the server with the vsphere client.

  for the data store, I planned a system of raid level 1 of 2 250 GB drives. on

  computer Statup disk there where he is known as level 1 raid (fasttrax

  output of the controller 'raid1 1 x 2 250 GB').

  the problem is that I can't create a store of data with these 2 drives. I have

  always see two disk independently. the same problem during installation

  Progress - I can't choose between the 2 drives a usb memory

  stick.

  to test, I set up a drive as a data store created a virtual

  machine with 10 GB on this subject. the capacy of these degrees of disc the capacy of

  the other is not. so I think that there is an independent.

  Someone has a tip or something for me or can tell me what I am doing wrong?

  Thanks for your help, best looks

  mormen007

  Unfortunaely the controller you have is not a real hardware raid controller and therefore not supported with ESXi.  You must use a raid card material with cache with battery backup as E200 HP or Dell Perc 5i.

  Please give points for any helpful answer.

• address problem complete

  I don't know if I'm looking at the right place, but maybe someone can help with information.

  Previous Verizon DSL, now Frontier DSL for about 2 months (they bought Verizon).

  Until this morning, by entering the url of all that was needed was enough information (ie: "Amazon" for amazon.com.) ("drudge" for drudgereport.com, etc.) then FF would complement the address and ".com", ".net", etc., and then I went to the desired location.

  However, this do when used, rather than fill in the address and arrive at my destination, I would be redirected to a "Yahoo search assist border" page where I could then click on the result and get on the site, I desired. Only by typing the entire URL could bypass the redirect.

  I checked to see if my "true/false" for FF have been in operation required and they were. Scan virus Ran and came clean so contacted technical support online frontier, since Yahoo is the partner of their research and I continued to meet at the border home page.

  After pulling up from my account, the rep online (they have only one, only ONE, for the entire online tech support staff) told me that he has never heard of just by typing in keywords for addresses and that he STILL had to enter in all of the thing.

  O.o

  Then, he suggested I do a Google search for my problem.

  o.O

  Zero I cancelled the session online and called to the 24/7 phone support. At the time where my account information were fired upward with the phone rep, that the problem has disappeared as if by magic.

  O.O

  So my questions. Was it a coincident temporary bug with FF (I'm a beta tester crash test dummy), a bug not taken with my virus/malware scams or... Path of the border to distract me from Yahoo to generate advertising revenue.

  The calendar shows the third option, it's the first and only time this has happened since the online in 2003, but before we get IN. with Frontier, I felt I needed more information.

  Thanks in advance!

  I couldn't find specific information on the border, but many ISPS have begun to use a 'area of assistance Service' for stealing web addresses which do not solve exactly as you typed them. You should ask them how you can unsubscribe from this service.
  
  http://www.theregister.co.UK/2009/07/28/comcast_dns_hijacker

  Here is the page I should use with Comcast to disengage from Comcast 'service '. He seems to stand for 6 to 8 weeks, and then I have to reset this 'service' by the opt-in and then "opting out" all over again the next day.
  
  http://DNS-opt-out.Comcast.NET/Help-index.php

• Acquisition of analog and video synchronized

  Hello experts tiara,.

  I am curious about this example Diadem DAC:

  http://zone.NI.com/reference/en-XX/help/370858M-01/explonl/explonl/explonl_dac_video/

  He claims to be able to acquire analog and video synchronized.  Anyone can determine how to properly synchronize these two data flows are?  Because it is a desk, probably Windows machine and no trigger material between video and analog devices, I'm guessing that the two are, at best, on +-1 second.

  Can anyone solve this problem?  I see in the manual use tiara (here) that NEITHER has done some work in order to study how the clocks are accurate in Diadem.  And they even mention a few points of 100 msec.  But I don't really trust this number when it comes to acquiring analog and video data simultaneously.

  Thank you, John

  Hi John,.

  You ask an interesting question, and I had contact with the developer of R & D responsible for this service and received an explanation on his part on the works of this feature.

  The target application for this specific feature is not for use cases where the exact synchronization between the measurement and data acquisition are required (i.e. a crash test of vehicles with more than 1000 frames / second video recording). This feature is implemented for users who wish to have the possibility to use webcams to get insight into what their machine or test do any recoding data at the same time. We should ask this 'parallel acquisition data and video' and not 'synchronous acquisition' - which suggests that it is a way to ensure that the data and the video are actually synchronized during the acquisition process. The original entered German aid system speaks 'parallel' instead of 'synchronous' acquisition, the English translation incorrectly uses the word 'synchronous' instead of 'parallel '. I contacted our documentation team to clarify this part of the help system.

  Accurate synchronization to achieve, especially between multiple streams of data acquisition and a camera, the application must use frame grabber hardware - hardware specifically designed to support the capture video or image.

  This is how DIAdem DAC addresses this type of application, I hope this information is helpful to you and others to this feature:

  Tiara DAC is a top priority on the acquisition and the release of the data to and from data acquisition equipment. The video recording feature is less of a priority and is not controlled by tiara constantly. The video recording process is triggered as closely as possible to the data acquisition process. The current local time stamps of two triggers (data and video) is registered allows us to determine the exact time for the two signals of reading according to DIAdem, i.e. If there is a delay in the start of video recording, is considered for reading in MODE of DIAdem.

  Our tests with made with a camera (not multiple, which is supported by MODE of DIAdem) and data acquisition equipment NOR (not several devices, which is also supported by DIAdem). In these tests, that we have seen the video and data were generally synchronous within some frameworks (no real 100% synchronicity) - which was quite thin which this solution based on USB low-cost camera technology was designed for. It is generally better than +/-1 second depending on the application, but also synchronized to the millisecond like material systems would be able to achieve.

  There are several factors that influence the results of the tests carried out in this area of application: PC hardware (CPU, RAM, disk system), the tasks of measures, other software running on the computer chassis, the camera and the framework, software drivers, etc.. There are too many variables beyond the control of tiara that can influence the synchronicity of the acquisition of data and images based on the software only, so true synchronicity can be achieved using equipment designed for this purpose.

  I hope that clarifies the DIAdem DAC functionality a little better. Thank your for having pointed out the misuse of the book 'synchronous' in the help system, going as fixed for the next release of DIAdem. Please let us know if you have any other questions.

  Best regards

  Otmar

• Ms - Accessories import waveform parameters

  Hallo,

  If I try to import a car crash test (ISO TS 13499) Ms format, I get all channels in the form of wave, but without x-property of waveform.

  I show part of Heath a channel in the MS format (taken from the example collection OR):

  Channel code                : 11HEAD0000H3ACXA  (is the name)
  
  Unit                        : m /(s*s)           (is)
  
  Sampling interval           : 0.00012           (must be width x-step waveform)
  
  Time of the first sample        :-0,06             (should be wave x-offset)
  
  Number of samples           : 3001              (East of length)
  
  

  Siegbahn waveform should also be "s" according to ISO TS 13499.

  I would like to ask you how to get the accessories of waveform by another way than to write own use or perform some post process script.

  I pass the values to the wong format?

  Thanks for the tips.

  Radek

  Hi Radek,

  Please do not hesitate to test the plugin data attached. You can save this file somewhere on your local drive. You install the plugin from doubleclicking the file.

  Best regards

  Hans

• Rule WARNING level disabling

  Hi, I am looking to disable the warning level for all rules that are active notifications. Given the thousand rules in the specific case of Foglight, it is impossible to remove manually, so I addressed the issue with a script. I am able to locate all the rules by using the following code, but I don't know how to deal with checking if a warning level is active and if so turn it off.

  def rs = server ["RuleService"]
  def rules = rs.getAllRules)

  sb = def "<>
  for (rule rules) {}
  If (rule.isSuspended ()) {sb< rule.getname()=""><>
  else {}
      
  }
  }

  return of sb

  I think I would need to use the setSeverityEnabled function, but I don't know how to check the level of each rule before that.

  Thanks in advance

  Let me start with a word of caution.

  Everything you do, please try this standalone Foglight Server just to make sure that it works properly and works as expected (the script is 2009). Keep in mind that once you run a script the changes stick then please test scripts results several times and test on a server foglight you can remove/resintall until you make sure you've got the right result.

  This is a script that came from Geoff Vona, thanks to Darren Briefcase to find it.

  Again, I can't emphasize enough, Please make sure that you use this very carefully and test several times on a stand-alone server (environment crash test) to check what you want him to do, he does. It should help you to get at least to the proper syntax.

  com.quest.nitro.service.sl.interfaces.rule import. *;

  def suspendRule (rule) {}

  try {}

  def ruleService = server.get ("RuleService");

  print the 'Rule' + rule.getName () + "has only one condition to WARNING, suspend the rule."

  ruleService.suspendRule (rule.getId ())

  }

  catch (Exception e) {}

  e print;

  }

  }

  def disableCondition (condition, rule) {}

  try {}

  def ruleService = server.get ("RuleService");

  Print "rule deactivation WARNING level to" + rule.getName ();

  condition.setDisabled (true);

  ruleService.saveRule (rule);

  }

  catch (Exception e) {}

  e print;

  }

  }

  def ruleService = server.get ("RuleService");

  (rule in {ruleService.getAllRules ())}

  try {}

  print rule.getClass ();

  print rule.getName ();

  If (rule instanceof SeverityFamilyRule) {}

  print 'found gravity family rule. "

  WARNING ConditionalSeverity = ((SeverityFamilyRule) rule) .getWarning ();

  Criticism of ConditionalSeverity = ((SeverityFamilyRule) rule) .getCritical ();

  Fatal ConditionalSeverity = ((SeverityFamilyRule) rule) .getFatal ();

  If {(warning)

  If ((! criticism &! fatal) |)

  ((criticism & critical.isDisabled ()) & (fatal & fatal.isDisabled ())) {

  suspendRule (rule);

  }

  else {}

  disableCondition (warning, rule);

  }

  }

  }

  }

  {} catch (ClassCastException EAC)

  print the EAC;

  }

  }

• T410s - slow 1.8 "disk drive, terribly autonomy - for 2 lbs of weight?

  A few days ago, got my T410s with hard disk of 250 G and 8 GB of RAM.  Replaced my X201s since the small monitor was too small. I selected the T410s the T410 because he was supposed to be the lightest of 2 books and more "thin".

  The T410s is a big disappointment - 1.8 hard drive "tiny is slow and you will find many periods where the system crashes all disk hard icon turns on (which is the point of a proc i5 and 8G of ram if the disc drags?).  Yes, Yes, I know I should have bought the SSD from $1,000, etc etc but why sell this shit with a disk 1.8 "anyway when he can't follow.

  Lets talk about the battery life - with my CPU set to maintain 25% and aggressive display and disk etc. in about 2 hours, I hit the 'nervous' area - the battery indicator is less than 50% and down fast and you start wondering if you have to last an hour or 2 hours.  Very frustrating, especially when I see Macbook my wife just chugging along for 5 hours without his having to this button and press and kill the display.

  So after paying a premium of $500 on the T410, I feel really disappointed with this T410s.  Its probably 2 lbs of lighter than the T410, but 1 lb of is probably shorter battery and with a slow 1.8 "drive is just a complete waste of time and money.  It should be sold ONLY with a SOLID-STATE drive, which could give him a better battery life anyway.

  And Yes, I am a die hard fan of Thinkpad as the rest of the world - if only they use since the mid-1990s... But then I think I really need magnesium alloy display cages crash tested at 4000 feet on my mobile daily regular?

  Grrr, just about the evacuation and stuck with this stupid machine for the next 2-3 years after paying all that money and after spending days setting up this crap drive 1.8 ".

  -vic

  Hey vic,

  Just discovered cela Engadget, how about a T420 with up to 30 hours of usuage? Now you can work 24 hours, or even 15 hours if we consider that only 50% of it?

• Windows fails to load. That it recharges on normal startup. Hangs on a black screen with a cursor in repair mode.

  I was in my class and hit the computer on the desk. I turned it and then turn it on again now, this problem occurs. It's a Toshiba, and Toshiba normal screen comes up and takes me to the screen "windows failed to load. When I choose to start windows normally, it hangs on the Green loading bar before you restart thereafter. I have it on the repair of the system right now, but he is suspended on a black screen with a cursor and nothing else.

  Hello

  Since then, he has been the "Crash test" the help of a computer store real (not the leeks and glances at a BestBuy
  or other BigBox stores) or the system manufacturer support is probably needed. The underlying problem is probably
  material and it is doubtful that all the efforts of software will work even if it is remotely possible.

  The problem may come from the damage or corruption of the hard drive for the next message will be directly related to
  This question.

  --------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• the start-up of the plant of Win8 0xc000000e

  I need emergency aid. I recently had winxp on my pc and I enjoyed a little more win7, but now I want to upgrade my Windows XP desktop computer to win8. I've been trying, but I get this really annoying 0xc00000e error instead of the splash screen when I had Windows XP. So I thought I would try a little experiment and do a clean install of win7. Still the same message appears. I try to repair through loading win7 dvd and enter the repairs and open the command prompt. I have try the suggestion of youtube videos that suggest commands like bootrec /fixboot then bootrec /fixmbr and finally bootrec /buildbcd in the repair install of win7. But I still get the annoying message. I had a backup hard drive (crash-test dummy, I call it) so I took my drive hard win7 and set in the test dummy always the same message. I'm installing to a flash drive and tried all the bootrec strings that I said previously the flash player and my win7 (not that I really expected it work). Could someone help me please?

  P.S., It might be useful to specify that the disks loading but my perfectly working usb and the reader are not currently allowed. Most recently before trying on my desk, I installed win8 on my sisters laptop computer mind precisely these same tools.

  Danel salvation,

  Thanks for posting your query in the forums of Windows.

  I understand that you found a 0xc000000e error when you try to start. We're really sorry for the inconvenience caused to you.

  This error code occurs when there is a problem with the hardware or drivers. I suggest to remove all devices from the computer (except the mouse, the keyboard and monitor) and start to see if the problem resolves. Because you are using an old computer that almost all of the drivers on the computer should be overcome. So I suggest you to update the latest drivers before trying to upgrade to Windows 8 and then check. If the problem persists even after the update of the drivers, it would be better if you go for a machine with a better Setup.

  You can read the following Microsoft article to find out the system requirements for Windows 8.1.

  The system configuration required

  http://Windows.Microsoft.com/en-us/Windows-8/system-requirements

  I hope this helps.

  Please post back if you have problems related to Windows and we will be happy to help you further.

• Driver Matshita DVD Ram UJ8B0AW

  My machine: ASUS A43S i5 (bought in August 2012)
  Original OS: Windows 7 (now upgraded to Windows 8)
  Problem:
  (1) after upgrading my DVD does not work
  (2) is unable to read any kind of CD/DVD software or audio videos
  (3) cannot even see the device in Windows Explorer
  (4) if I insert a disc in the DVD it drive will only spin for a few seconds and stop
  (5) ran all the tests available diagnostic built inside Windows 8 as reinstall, hardware test, trouble shoot, fix auto, bah bah bah. Tried every thing as available as possible AND MY PROBLEM WAS NOT FIXED. I tried everything already!

  He said only "Matshita DVD Ram UJ8B0AW has a driver problem" and that it has NOT been FIXED.

  I downloaded the latest driver from ASUS and Matshita and reinstalled manually and it is still DO NOT SET

  Even though I can start from ground zero and reinstall using F12 initially upwards and insert a window 7 or 8 disk, I fear my DVD will not move and cannot reinstall Windows no matter what.

  What can I do?

  Try to remove the GEARAspiWDM entry.

  To remove the GEARAspiWDM entry double-click UpperFilters and, under value data, delete GEARAspiWDM > OK

  Create a system restore point beforehand and restart the computer after.

  However, if you have an application that uses the GEARAspiWDM, like iTunes, just install the latest version of hardware drivers (4.020.5) and that no changes to the registry:

  http://www.GearSoftware.com/support/drivers.php

  Updated speed drivers should also correct the mistake.

• Parascrolling, points of failure and accidents!

  I could really do with little help, advice and a long cool drink.

  I agree finish a site yesterday for a company of new friends, that was before I realized there was an update for Muse!

  I got it in my head that I wanted to do, which included some Parallax scrolling, nothing too complicated because I do this for free. After working some relearning problems, new things, moved the articles, etc, I started to draw.

  I have a 27 "iMac, so I like to draw things to adapt to the big screen. I admit that when I saw the new breakpoints, I thought, 'ok, what they are? I've not played with Muse for 6 months. So, I watched a video with Adobe Dani Beaumont on jumps again and how they work, so I thought. It looked simple enough, but she was using an existing site and there were also Dani Beaumont!

  I started by creating the page with images, adjusting the width of the browser, including the width of 1200 page. But this does not seem to fill the browser, just the 1200, so I did 2500, with breaks to 1200, 600 and 300. After working on some bugs with my scrolling effects I finally finished my drawing. Now, on breakpoints, I was not prepared for what he has done! That was to move all the items of my paper to the top of the page, stacked one on the other. So I have now gone through and set everything, once again. All, repositions. But now I have my logo, which works perfectly on the larger version, but on the 1200 now randomly scrolled upwards, even if she has the same position as the largest 2500?

  I'm afraid now to design the design of the Tablet and smartphone. Flicking just between two larger sizes was enough.

  But all the way through this Muse crashed several times, usually by clicking in between sizes. Even more annoyingly, saving my document I went exploring tricks to get things to work, ruining my document in the process, but it's ok, I thought that I won't have to save, for Muse to crash and autosave my document.

  If I could really do with some advice on how I should approach designing a site for several devices size and how to address breakpoints. Why did he did everything move to the top of the page and all the battery?

  Hello APK1972,

  Please see this tutorial by one of our widget partner who could give him more insight in the design of websites adapted to Muse.

  Construction of a sensitive site in Adobe Muse | Adobe Muse CC 2015.1

  And to deal with the issue of crash test by performing the steps mentioned here - Re: Adobe Muse slow and crash

  Let me know if this helps you.

  Thank you

  Ankush

• I have a PROBLEM with Adobe Flash Player

  I use Windows 10 Pro UPDATE with the latest updates.

  My system is a processor intel Core Duo CPU E8500 @3. 16 GHz with 3 GB or Ram.

  I use Fire Fox Version 47.0b8

  I have the latest version of Adobe Flash Player Version 21.0.0.242

  I asks me to update my drivers window, I.

  I asks me to update my video drivers, I.

  I asks me to update my Adobe Flasy Player, I.

  Adobe suggest for me to uncheck the "enable hardware acceleration". Yes, I did.

  When my Flash Player freezes or crashes. I send error reports.

  I spend hours looking for answers to my questions with nothing doesn't.

  

  If you notice there are a few missing details about these error messages. They tell us SQUAT about what is the problem or error.

  Why Adobe cannot put it on a stable Flash Player which does not crash or freeze?

  From what I've read on this issue, since a problem going on Windows 7

  I'm sick and tired of trying to do something on my computer when your program crashes or freezes. If you would put a program to help us diagnose the problem. It would help us. But instead, we send your company only intel to help make it better. Well guess what... I'm tired of being a Crash Test Dummy for Adobe. My comments are not good for Adobe.

  I found the problem why adobe flash player freezes or crashes.

  There is a glitch in 10 Windows this software from 3rd party effects like adobe and causes windows to freeze or crash.

  reezing-my-computer-randomly/5113f79a-6511-4f26-8ae3-0d331394fb0d?page=4 http://Answers.Microsoft.com/en-US/Windows/Forum/windows_10-performance/Windows-10-Keeps-f