Ethernet emulation

Similar Questions

• Bluetooth error in loading the firmware - Satellite Pro NB10-A-110 Ubuntu 14.04

  Any suggestions?

  dmesg | grep-i bluetooth

  toshiba_bluetooth 10.051157: found device Toshiba ACPI Bluetooth - RFKill installation manager
  toshiba_bluetooth 10.068193: re-activation Toshiba Bluetooth
  10.310758 Bluetooth: Core worm 2.17
  10.310794: HCI device and connection manager Bluetooth Initialise
  10.310805 Bluetooth: socket initialized HCI layer
  10.310809 Bluetooth: L2CAP initialized SSL
  10.310817 Bluetooth: initialized SCO socket layer
  13.184056 Bluetooth: RFCOMM TTY initialized layer
  13.184074 Bluetooth: initialized RFCOMM socket layer
  13.18409 Bluetooth: RFCOMM ver 1.11
  13.304766 Bluetooth: EXACTLY (Ethernet emulation) ver 1.3
  13.304772 Bluetooth: EXACTLY filters: multicast protocol
  13.305281 Bluetooth: initialized EXACTLY socket layer
  Bluetooth 13.574204: error in the firmware loading err = - 110, len = 448, size = 4096
  13.574303 Bluetooth: the patch file load failed

  Hello

  This laptop is equipped with Atheros WB335 (aka AR9565) WLan / BT combo card.
  I'm not very well why the BT does not work in connection with the kernel 14.04, but I recommend you to check the discussions of the Ubuntu forum on the issues of the Qualcomm Atheros AR9565 m.

  For example:
  http://UbuntuForums.org/showthread.php?t=2172044

• Emulation of the instrument for testing purposes

  Hi all:

  It is a more general question about the design of software systems:

  I have a program, written in C++, which communicates with several instruments OR on different buses - GPIB, Ethernet, DAQmx, series. The program makes certain features of test, control instruments, stores results, etc. Pretty standard stuff.

  However, we continue to make changes to the above programme and, before it can be released to the nature, it has itself to test. What I wanted to do, it's this test script and test some of the components of the program that don't involve not talk to the instruments. This is possible offline on the server to build automatically, for example. But to do this I have to turn off, sort of speak, the instruments beforehand.

  Does anyone have experience in design of support for this kind of instrument emulated mode? What are the General design strategies to do? Warnings to avoid? There may be tools/libraries available than this.

  Thank you

  -Ilya.

  For a single software option, you must use only the IVI drivers for Ethernet/series/GPIB instruments. The IVI specifications require a simulation mode.

  D Biel - the link does not work. Is - this other AE page we see published from time to time?

• EMule is blocked, how to fix?

  Network wireless adapter NIC Ethernet network device
  I HAVE A PROBLEM WTH EMULE, WHICH IS BLOCKED HOW TO FIX THE PROBLEM?
  ELIEL SCHÄFLER

  Hi Eliel,

  You use Microsoft Security Essentials?  If so, how do you know MSE is what blocks EMULE?  What is your Windows version?  When the blocking began?  What has changed recently (hardware, software - added or deleted - updates, reconfiguring the security settings to security programs, changes to network configurations or connections or the router settings)?  If not using MSE, what security software you use (names and versions of all)?  If you receive error messages, they say exactly Word for Word with all the codes for each message that is different?  What exactly told you that EMULE are "blocked" - what is the exact message from Word to Word, which sends you this message and when is it sent?  The message or anything that indicates precisely which files are blocked?  What is the Device Manager say about the NETWORK card (is it showing clearly and work or are there symbols such as a red X or a yellow triangle or a white question mark next to him or any other device - and if so, which device or devices and what to do the details say about mistakes)?

  We need your help to help you.  Please answer these questions (it is unclear who may be the key to identify the cause and the solution) in your next reply.  Although we do not know where to start in terms of help as there are too many possibilities without additional information to narrow things down to something more reasonable.  We are more than willing to try to help you, but we cannot do it without working you too hard we want to solve this puzzle.  The ball is now in your court.

  Thanks and good luck!

• Hyper V error in Windows Phone 8 emulator

  When I try to run the Windows Phone emulator, it shows this error message:

  The Windows Phone emulator was not able to create the following network switches:

  Something happened during the creation of a switch: virtual Ethernet switch creation failed.

  Connection Ethernet Port '{C311783F-7BDB-456A-9976-06F925FB1185}' failed: catastrophic failure (0x8000FFFF).

  Is it possible to work this autour?

  Hello

  I found a solution. Remove any sharing allowed on your active internet connection.

  See you soon,.

  Magajy

• Name of the Workstation 9 module for ethernet

  Hi, I have Vmware Workstation 9, running Centos 6.3 x 64.

  I wonder what is the name of the Ethernet module in 9 workstation?

  When I run lsmod I don't see a vmxnet or pcnet32

  Cat vmware - tools.conf

  install/sbin/modprobe - q - ignore-install vmxnet pcnet32; / sbin/modprobe-ignore-install $CMDLINE_OPTS pcnet32

  If anyone can tell me the name of the module to the ethernet card?

  Thank you.

  Do you mean what NIC is used inside the guest of CentOS?  The emulated NETWORK card could be one of many.

  I just created a CentOS 64-bit guest in the 9.0.1 Workstation and the emulated network card is the e1000 (as evidenced by the ethernet0.virtualDev = "e1000" line in the .vmx comments configuration file).

  According to this article, the e1000 is "...". An emulated version of the Intel 82545EM Gigabit Ethernet NIC. "( http://kb.vmware.com/kb/1001805 )

• No Ethernet driver

  I spent the last two days and the other a last week trying to resolve this. Maybe I do not enter the correct key words on google.

  I use Workstation 6.5.1 build 126130.

  My host is Windows Vista Business 64-bit with Service Pack 1.

  My guest is Windows XP Professional w / SP2.

  Here's my .vmx file:

  #! / usr/bin/vmplayer

  . Encoding = "windows-1252".

  1. File name: WindowsXPPro.vmx

  2. Generated on 2009-02-03; 21: 41:38 from EasyVMX! 2.0 (beta)

  3. http://www.EasyVMX.com

  1. It is a config Workstation 6 file

  2. It can be used with the drive

  config.version = '8 '.

  virtualHW.version = "6".

  1. Selected for your virtual machine operating system

  guestOS = "winxppro.

  1. displayName is your name for the virtual machine

  displayName = "WindowsXPPro.

  1. These fields are free text description fields

  guestinfo.vmware.product.url = " " http://www.EasyVMX.com/ "" "

  guestinfo. VMware.Product.Class = 'virtual machine '.

  1. The number of virtual processors. Your virtual machine will not

  2. work if this number is greater than the number of physical processors in your

  numvcpus = '1 '.

  1. Size of the memory and other memory settings

  memsize = "1024".

  MemAllowAutoScaleDown = "FALSE".

  MemTrimRate = "-1".

  1. PowerOn/Off options

  gui.powerOnAtStartup = "FALSE".

  gui.fullScreenAtPowerOn = "FALSE".

  gui.exitAtPowerOff = "FALSE".

  1. Unique ID for the virtual machine will be created

  UUID.action = "crΘer".

  1. Settings for VMware Tools

  tools.remindInstall = "FALSE".

  Tools.Upgrade.Policy = "upgradeAtPowerCycle".

  1. Startup advice interferes with automatic start of a virtual machine

  2. This setting has no effect in VMware Player

  hints.hideAll = 'TRUE '.

  1. Enable synchronization of time between the computer

  2. and the virtual machine

  tools.syncTime = "TRUE".

  1. USB settings

  2. This active USB configuration

  USB. Present = 'TRUE '.

  USB. Generic.AutoConnect = "FALSE".

  1. First serial port COM1 physical is available

  Serial0.present = 'TRUE '.

  Serial0.filename = "Auto Detect"

  Serial0.AutoDetect = 'TRUE '.

  Serial0.hardwareFlowControl = 'TRUE '.

  1. Optional second serial port COM2 physical is not available

  serial1. Present = "FALSE".

  1. First parallel port, physical LPT1 is available

  parallel0. Present = 'TRUE '.

  parallel0. FileName = "Auto Detect"

  parallel0. AutoDetect = 'TRUE '.

  parallel0. Bidirectional = 'TRUE '.

  1. The sound settings

  Sound.Present = 'TRUE '.

  sound.fileName = "-1".

  Sound.AutoDetect = "TRUE".

  1. Logging

  2. This active configuration logging and guard finally open a session

  logging = 'TRUE '.

  log.fileName = "WindowsXPPro.log".

  log. Append = "TRUE".

  log.keepOld = '3 '.

  1. These settings decides to interaction between your

  2. computer and the virtual machine

  insulation. Tools.hgfs.Disable = "FALSE".

  insulation. Tools.dnd.Disable = "FALSE".

  insulation. Tools.Copy.Enable = 'TRUE '.

  insulation. Tools.Paste.Enabled = 'TRUE '.

  1. Other default settings

  SVGA. AutoDetect = 'TRUE '.

  mks.keyboardFilter = "enable".

  Snapshot.action = "autoCommit".

  1. First network interface card

  ethernet0. Present = 'TRUE '.

  ethernet0.virtualDev = "e1000".

  ethernet0. ConnectionType = "bridged".

  ethernet0. AddressType = 'generated '.

  ethernet0.generatedAddressOffset = '0 '.

  1. Settings for physical floppy drive

  floppy0. Present = "FALSE".

  1. Parameters physical CDROM drive

  IDE1:0. Present = 'TRUE '.

  IDE1:0. DeviceType = "cdrom-raw"

  IDE1:0.startConnected = 'TRUE '.

  IDE1:0. FileName = "G:".

  IDE1:0. AutoDetect = "FALSE".

  1. First IDE drive, size 20 GB

  ide0:0. Present = 'TRUE '.

  ide0:0. FileName = 'WindowsXPPro - 000002.vmdk.

  ide0:0.mode = "persistent".

  ide0:0.startConnected = 'TRUE '.

  ide0:0.writeThrough = 'TRUE '.

  1. END OF EasyVMX! CONFIG

  extendedConfigFile = "WindowsXPPro.vmxf".

  virtualHW.productCompatibility = "hosted".

  checkpoint.vmState = «»

  ethernet0.generatedAddress = "00: 0C: 29.6 c: 17:fd."

  UUID. Location = "56 4 d 04 1f 86 08 0 b bb-13 62 c0 8f 4 c 6 c 17 fd".

  UUID. BIOS = "56 4 d 04 1f 86 08 0 b bb-13 62 c0 8f 4 c 6 c 17 fd".

  debugStub.winOffsets.version = '1 '.

  ide0:0. Redo = «»

  vmotion.checkpointFBSize = "16777216.

  ethernet0.pciSlotNumber = "16".

  sound.pciSlotNumber = "17".

  debugStub.winOffsets.value = ' 0 x 88, 0 x 84, 0x18, 190 0 x, 0 x 174, 16, 0x22c, 0x1f0, 0 x 224, 0 20, 0 x 0, 18 x 18, 0 x 0, 20 x 24, 4.

  ethernet0.VNET = "VMnet0.

  My setting in the file above to ethernet0.virtualdev is e1000. I've never changed that. While I still have just the player (I used one of the vm online creators), I created the virtual machine and install XP without problem. There were a few devices without drivers; I realized that I needed tools and now I am trialing the workstation to install the tools.

  The problem is that the image can not find the Ethernet controller drivers.

  I installed the tools and reinstalled.

  I mounted the windows.iso and tried to look for it manually.

  I tried the search manually the XP cd.

  I was sure it wouldn't matter, but I even tried to get the driver of my host system map cd.

  Any help on what I should do to get the drivers installed for my guest?

  Your vmx selected the (not standard for 32-bit operating systems) e1000 driver virtual ethernet.  The emule a e1000 card Intel Pro/1000.   The e1000 driver is not included in the VMware Tools package.

  You can either delete the "ethernet0.virtualDev ="e1000"" line completely, which will be then by default your comments to map virtual ethernet supported by VMware tools, or you can download the driver for the card Intel Pro 1000 on Intel here support site: http://downloadcenter.intel.com/filter_results.aspx?strTypes=all&ProductID=1878&OSFullName=Windows *XPprofessional & lang = eng & strOSs = 44 & submit = Go %21

  Since you say that you have access to all of the VMware Tools, I'd say just remove the "ethernet0.virtualDev ="e1000"" line of your VMX file and then put it back in place the tools in your comments.

• Ethernet, says "cable disconnected".

  Ethernet, says "cable disconnected" I looked at a few posts... but they are old messages and say, update to 3.28.2, mine is Articles 3.30.1

  Referring you to update to 3.28.2? Where do you get this error message? Your iMac still running OS X Lion mountain 10.8.1? What exact model is your iMac?

• After the upgrade to USB 3 Hub Ethernet Sierra is no longer works

  On my mid-2015 15 "MBP, I have a Sitecom CN - 340 USB 3 Docking station. Apart from all kinds of outputs, it has an Ethernet port, which I've been using for the last 6 months without any problems... until the update for Sierra. Since then, the report of control center that the cable is not connected. I am now connected via Thunderbolt. Has anyone noticed this too? And then knows how to fix? The latest drivers are February 2016.

  Kind regards

  Oliver Holmes

  It turns out that the problem is so the driver being old-fashioned. The chipset is the AX88179 and the manufacturer provides its own drivers here: http://www.asix.com.tw/download.php?sub=driverdetail & PItemID = 131

  So, all is well again.

  See you soon,.

  Oliver Holmes

• Ethernet USB adapter does not work after update to sierra mac

  Ethernet USB adapter does not work after update to mac sierra.

  Please solve this problem as soon as POSSIBLE

  Hello guatamshah,

  If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.

  The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
  Reset the management system (SCM) controller on your Mac.

  https://support.Apple.com/en-us/HT201295

  How to reset the NVRAM on your Mac.
  https://support.Apple.com/en-us/HT204063

  If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
  OS X: about system information and System Profiler

  https://support.Apple.com/en-us/HT203001

  If she does not appear in the information system, see the articles below.
  macOS Sierra: If a USB device does not work

  https://support.Apple.com/kb/PH25343

  macOS Sierra: check your device's USB connection

  https://support.Apple.com/kb/PH25567

  However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.

  macOS Sierra: Add a network service
  https://support.Apple.com/kb/PH25279

  If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!

  Kind regards.

• How can Hello I just transfer program from a laptop to a desktop iMac computer using an Ethernet cable

  Hello

  How can I transfer a single program and its content from a laptop computer to an iMac using an Ethernet cable

  You can network or target mode a mac computer

  OS X Lion mountain: connect to shared computers and servers for files on a network

  Share files between two computers with target - Apple Support disk mode

  However, to transfer a program is not the user data (music, photos, etc.), you must follow the directions of developers and license agreements. Some programs need to be seen to withdraw their authorization, some don't, but most require a clean install to write the necessary components in the correct places, otherwise if you are 'slide' from one place to another, you can easily inherent problems of this method.

• Ethernet to the airport also on?

  I have my Mac connected directly to our home Airport Extreme via an ethernet cable. That same Airport Extreme acts as our main wifi router. Until recently, I didn't cause to turn on the wifi of the handiest airport on my Mac, but I have to if I want to use the new Sierra "unlock with Apple Watch" and copy and paste between the characteristics of devices, that which I want to be able to use.

  My question is, is my default Mac using the connection of the cable as my internet source or have two internet connections active will complicate things?  Is there a way to prevent the Mac to use the wifi for the internet, but still have it on for the other features it offers?

  Thank you.

  Nevermind, I found the answer outside this area communities:

  http://www.Macworld.com/article/3039842/Macs/can-you-use-Wi-Fi-and-Ethernet-on-a - mac-to-the-same-SystemRoot\Cluster\Reports\Validation

  You can dictate the order of preference for which network source is used in settings > network on your Mac. By moving "Ethernet" upward, your Mac always uses the Ethernet Wifi or any other sources listed below, as long as the Ethernet is an active connection. If something happen with your Ethernet connection (cable comes off, maybe) your default settings for Mac to the next source in the list that has an active connection.

  Apparently there is nothing wrong with having active ethernet and wifi connections at the same time.

• Ethernet questions

  So I don't know what is happening but I had an internet outage the other day for about 36 hours when some construction cut my ISP ADSL line and never feel things acted like weird, but from what I can tell it's my 4th gen time capsule at fault.

  Only 1 of the 3 ethernet ports seems to put on the internet. I use the other to my basement, and it sometimes says it's on the right of the network with no internet access, but most of the time just says unidentified network, no internet access. He worked all day but seems to just decide he doesn't want to chance.

  The other problem is that the TC itself appears to be loss of connection randomly with flashing orange. When reset, it works again. Don't know what is happening here. I use a PPPOE set up to connect via the TC; the ADSL modem is connected via Ethernet. Nothing has changed on my end, this could be a service provider because of the failure?

  Thank you

  Also, the modem is a router?

  What is the make and model?

  I use it as a router and try again with just the bridge the TC.

  PPPOE can be problematic.

  Ethernet ports can blow... If you get a tip to the top of the line... then we can take any ethernet port connected to both... If that includes the Port of the TC WAN no longer functions as a router.

  You have a little work to understand the question... but another router is key.

• Unable to connect to the internet using Ethernet

  I have a Mac mini as I try to connect via Ethernet cable to a modem Comcast Arris TG862. I was connected via Wifi without problem (with the exception of the slower speeds). I know that the Ethernet ports on the back of the modem seem to work, since I can listen to my TV, etc. In settings > network Ethernet shows as green and connected and gives me an IP address, but as soon as I turn off Wifi no web page doesn't load.

  What I am doing wrong? I thought that it would just connect. On the Ethernet port lights, which I think means data transfer. Otherwise, I need to tell Firefox or Chrome to turn to the Ethernet connection?

  Thank you!

  The default configuration is to have the WiFi over Ethernet in the Service order.

  The order must be set such that the (desired) primary service is at the top of the list and the backup service is below.

  If you look at the order of service when it is connected to the network, the higher is the provision of access Internet one (or at least, he thinks Yes).

  To set the order, click on the menu of the machine and choose the order of Service. Move Ethernet to the top of the list. This should make it primary unless he loses the connection.

  However, it must move up Ethernet and provide a connection when you have turned off the WiFi. When you disable WiFi on the Mac, the Ethernet connection move to the top of the list and show a green connection?

• set up a branch to the main ethernet using Airport Extreme network

  Could someone help me with this network configuration please?

  I rent an office and we have an ethernet cable coming into our building to the main network (a fiber broadband building next door). The ethernet line give you IP addresses and internet link.

  I would like to set up our own network in our building-

  1 / would put an Airport Extreme there is the ethernet cable and then plug the cable into the WAN port

  2 / I would implement the EA to distribute IP addresses, but using a different pool - so if the main building uses 192.168.1.1 to 192.168.1.256, I would be created my AE to use 10.1.1.1 to 10.1.1.256

  3 / I would then run an ethernet cable between the port LAN on EI to my Netgear 24 port switch.

  4 / I would connect all our other airport extreme and express again our Ethernet switch and put them all to 'bridge mode '. The switch ethernet cables may be connected to the WAN ports on these airports.

  Anyone see any problem here? We would just to have control over our own IP addresses and be able to restart our Airport Extreme, if we must, do not rely on the building next door to the distribution of intellectual property. I know still need to answer on them for the internet connection, but that's fine.

  Thank you!

  It should work. It would be the basis of a network of mobile type.

  A word of caution. With the exception of the "main" AirPort Extreme that performs as a router, connect the other base stations using their respective ports of LAN. We found some inconsistencies when a base station is in bridge mode and the connection is their WAN port.