EtreCheck reveals two subprogrammes [cannot] Adobe.  We're in the LaunchAgents com.adobe.ARMDCHelper... plist and the other is in LaunchDaemmons com.adobe.fpsaud.plist.  Are they important?

Similar Questions

• I have two computers, one running Windows 8.1, the other works in Windows 7.

  I have two computers, one running Windows 8.1, the other works in Windows 7.  I put Premier Pro, or a suite, on both computers at the same time?

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

• backup drive died with all my photos adobe has all my photos as thumbnails how do I get the thumbnails to adobe? where are they that do not have the habit of losing their thanks

  backup drive died with all my photos adobe has all my photos as thumbnails how do I get the thumbnails to adobe? where are they that do not have the habit of losing their thanks

  If you mean that the unit containing your photos is dead and that can still be seen in the catalog, I'm afraid, you can't do anything.

  The thumbnails are stored in a cache file that is a sqlite database. Each thumbnail is stored as a binary field in two very small dimensions: 120 x 160 and 240 x 320 pixels. It is not an image format and I don't think there's a way to extract them.

  The cache file is named thumb.5.cache and is located in the catalog folder. You can locate this file in the menu help/information system of the Organizer.

• Have two networks. One is 'working '. The other is the "homegroup". 'work' to the internet. "residential"local group. IE cannot access the internet. Help

  So here's my problem:

  It is a routing problem.  In short, it comes down to how to get IE (or any application) to use a specific WiFi adapter with Internet and ignore the adapter WiFi that goes to a network is private with no internet.

  This is the situation and what I tried.   No joy.

  PC hardware:

  primePC = Win7-Pro with two WiFi.   WiFi-Internet and WiFi-Local-premium

  tabletPC = Win10-Home with a (currently) WiFi-Local-Tablet (not internet from now).

  Use the Description of PC hardware

  primePC is my laptop that I use for work and all the rest.  It goes where I go.

  Tablet PC is in my mobile office and stay in the van (office) when I'm on-site customer.  I use it for

  things like control my monitors in the van (office).

  Network:

  WiFi-Internet (primePC) is connected Internet router to the Internet.

  WiFi-Local (primePC) is connected via the Local router

  WiFi-Tablet (Tablet PC) is connected via the Local router

  Objective:

  WiFi-Local allows you to share files and use VNC for remote desktop.  (Win10-Home support not native RDP).

  Use wireless Internet to connect primePC Apps IE for example to the internet via WiFi-Internet connected to the Internet router.

  A photo is included.

  

  THE PROBLEM:

  Because primePC has WiFi-Internet and WiFi-Local, applications such as IE are getting confused.

  How can I say (other applications) to use wireless Internet for internet connection?

  What I tried:

  Have you tried ForceBindIP on Win7, but is no longer works.  I'm sure that at some point, it has worked.

  Even if I could make it work, I don't really like it.   There *.   I don't want to link to an IP address.  I want to

  link to a Mac address is the Mac of the WiFi-Internet address.

  Other Options:

  Soft router (ugly) There must be something that can do this.  But I have not found one.  I guess it's a kind of soft router.

  Firewall, routing (still ugly)

  I have a firewall (on average by the way).   Creating a routing table in AVG is not good for the following reason.

  The entire Setup is mobile.    WiFi Internet is constantly connected to different internet routers, so learning new IP address that I have no control over.

  Future:

  Currently, the problem is on the primePC.   But in the end, I have also a problem similar with tabletPC, since the tabletPC is going to have a 3G connection / 4G to the internet.  This connection will go up and down based on (A) if I have internet with WiFi-Internet-router or not.   Using a hub of 3G / 4G for private network will not be good option because (A) the security because it allows access to my tablet, another security van mobile devices (B) cost of using a mobile router WiFi "hot spot" vs just to have two phone lines, both have unlimited data service of attachment (not unlimited hotspot service).

  Hello

  According to the description, I understand that you have a routing problem, you try to get IE to use a specific WIFI adapter with the internet, while ignoring the other WIFI adapter that goes to a private network.

  It is not possible to connect two computer to the same WIFI cards. You must unmark a WIFI to use the other WIFI adapter.

  You can search using your search engine to find any third party software which may help you.

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  your computer is connected to a network domain?

  If your computer is connected to the domain network, then I would recommend to post your query on TechNet Forum.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  TechNet is watched by other computing professionals who would be more likely to help you.

  Hope this information is useful.

• Two MacBook with a mg6320 - can scan the other cannot

  Hi all

  I have two Macbook Pro, the Mavericks running.  I installed any software of Canon printer on either.  On one of the macbook pro, I can scan my wifi connected MG6320 in construction in Preview app.  On the other hand, I can't.  It is said that "software for this device is not installed."  I have put MG6320 in place on both using Airprint.  What gives?

  Thanks in advance.

  Nevermind, I figured it!  There is a Setup button I could click in the application preview to install the necessary drivers.  It's working now.

• Show the files to the top two places and I cannot delete one without deleting the other

  Hello

  I'm trying to clean up a laptop computer slow execution that is running Windows 7. I transferred a bunch of photo files of my image on an external hard drive folder and then deleted all the photos from my hard drive. Everything seemed to be going great. Then I noticed a bunch of files in my photo folder that shouldn't be there. One was a big file I have on my desk. I deleted it from the photo folder is not there, but it is also removed from my office. I restored the file from the Recycle Bin, and it restored in two places.

  For some reason, several files from other regions (such as the office and downloads) are also appear in my pictures folder. I thought that they were just copies, but they must be the same files just somehow in two places at once, since each copy deletes when I delete one. How to disassociate the and get rid of the excess files?

  I tried to find the answer with a Google search, and I learned that it is not the best idea to save documents and folders on the desktop. I will do that more. But how to untie all of these files so I can delete one and not the other?

  Thanks a lot for your suggestions!

  Jen

  Look carefully at what you use.  The library is entirely different from the image in folder.  The library is just a quick way to see several places at the same time (nothing can ever be "stored" within a library).

  Exercise: Right click in your image library and choose "Properties".  Here you will see all the places that will appear in the display of image library.  You probably, some places are represented in this library that are not intended to be.  No problem, you can remove them from the list.

  Remember that the library is showing a simple view combined all these places you.  The files are always stored in original places and when you remove the library view, you delete the original.

• Apple TV 4 cannot be used simultaneously with the other Apple TV

  We have just added a 4 AppleTV to our collection of the 2nd and 3rd generation AppleTV (all run wifi that we're not wired Ethernet in the House). For the first week or so it was no problem to start the 4 AppleTV and one of the other two, but since yesterday on the AppleTV 2nd generation (just to set market and access to iTunes or my library, not really look anything like that) not only causes the AppleTV 4 deadly freeze, but I end up having to restart the modem and the router with the computer (note that) (, meanwhile, the AppleTV 2 seems to work but I get annoyed at to get the 4 works again and just had to turn off so I don't know how stable, it has been). I have a modem/router Netgear of Cox (even when the AppleTV 4 wasn't running, SpeedTest has returned a normal wifi speed) I only use as a modem and a Terminal Airport Express as my wifi router. My operating system in Windows 10. Nothing updated (other than the Synaptics touchpad software) between when he was working Friday and when he decided to stop playing at the same time on Saturday. Once the computer, the AppleTV 4, the router and the modem has restarted, I once more have access to my iTunes to the AppleTV library and play something.

  I still have intermittent problems where the AppleTV 2 and 3 suddenly decide that they cannot see my library and I have to restart iTunes (which is completely unrelated to the current issue and I'm sure function of the way that Windows treats Hello), but in the case of the AppleTV 4 trying to run at the same time as the AppleTV 2 restart iTunes does nothing. Even with completely disconnected the AppleTV 2, restart iTunes (and even the computer) and restart the AppleTV 4 I'm not even to mirror content access purchases through the iTunes store or iTunes on Windows to the AppleTV, so my conclusion that I had to reboot the router and the modem, which was the only way to return the feature.

  At one point we tried to replace the AppleTV 4 with 3, and he was unable to work as the AppleTV 2 and these two have been exploited in tandem for about 3 years now generally without interference other than a problem when we suddenly decides that he cannot see my sharing even if the other is played.

  If someone has any ideas as to why I am suddenly unable to run two AppleTV at the same time, I would like to know. I don't have time to get into it tonight we try to watch a movie, but I think to restore the AppleTV 4 factory settings and see if that solves this problem. I'm also fooling around with the configuration of the 3 units when I have the House to myself and are not trying to keep anyone entertained. I'll post back tomorrow if I can get 2 & 3 or 3 & 4 at the same time. I hope I get lucky and be able to operate in any combination again.

  Just a quick suggestion. Have you given different names mountain BIKING? Apple protocols for colocation and AirPlay are based on these names and get confused if devices with different IPs claim the same name.

• I have two disks, a load with Vista 64, the other Vista 32. Can I integrate the 32 in the 64?

  I would like, with a minimum of functions software loss as Nero, etc are my new old VIsta 32 part, instead, a 64 bits two order install. Any suggestions?

  N °

  They are 2 different operating systems.

  You cannot merge together.

  You can delete one or the other.

  See you soon.

  Mick Murphy - Microsoft partner

• Connect between two different applications. A call to the other application.

  I would like to know if it is possible to connect between two different applications in oracle apex IE appeal one request for the other? If the applications are allowed even say LDAP.

  Yes,

  Refer to the post office, requested by me and answered by fac586

  How to use one login for all applications in one only workspace

• can I use my license on two machines? being a macbook pro the other a windows office

  Can I use my license cc on two PCs is a macbook pro, and the other a windows desk top. \ ?

  Yes.

  Mylenium

• A computer, two users. You can get online, the other cannot.

  This is not a new set up. Has been connected to the internet for a while. This problem just started. Can you help me?

  If you go to start | Programs | Accessories | System tools you entered on the system restore?  You can restore to a point in time (yesterday? Last week?) before that the problem started?

  See if this helps: http://www.officeforlawyers.com/tips/sysrestore.html

  -B-
  http://www.officeforlawyers.com | http://www.OneNote-tips.com
  Author: Guide to counsel for Microsoft Outlook

• Windows Update: failed. __Code 643 windows Update encountered an unknown error. _ * AND * __I cannot repair Windows 7 with the disc either. My guess is: these issues are related...? __

  I have THREE questions which PEUVENT all be linked togther... What do you think?

  [I am slot as Windows 7 Ultimate (free upgrade to Dell PC w/purchase) on a Dell 64 bit PC XPS435]
  I've upgraded from Vista about 3 weeks ago.

  #1 - Two weeks ago I had a problem with the installation of Nero/LiquidTV-TiVo to my PC... (this is also when the problem started).
  To get the "Nero" thing figured out, I took the advice of someone on the Forum/Blog of Nero. The person has provided a lenghty explanation how to uninstall LiquidTV completely by removing the registry files... I don't really know what I'm doing in the registry, but everything that I helped my problem of Nero, but I couldn't tell you WHAT I deleted OR if I have deleted any bad subfolders or whatnot!... the next time I started my PC is when the NEW NUMBER is right.

  #2 - On my next BOOT, Windows Update has found an IMPORTANT update:

  A security update for Microsoft XML Core Services 4.0 Service Pack 2 for x 64 systems (KB954430)

  .. .and it fails every time, it tries to install saying this:

  Windows Update - failed

  Code 643 Windows Update encountered an unknown error.

  "Get help with this error" provides little or no help... but it says this:
   "WindowsUpdate_00000643" "WindowsUpdate_dt000"
  
  All the research I did, the problem seems to be with Microsoft .NET Framework... .and all the solutions I found talking about it, "UNINSTALL all THE .NET FRAMEWORK & REINSTALL" ... I tried and there is no .NET Frameworks listed in Add/Remove, and when I press on ' VIEW INSTALLED UPDATES'... " on my PC it says, "no updates are installed on this computer"... what the _____?

  #3 - Today, I thought I would just pop the WINDOWS 7 installation disc and do a repair/upgrade... It will not be upgraded.
  He cycles most of the way through, then he Has STOPPED and says this:

  The following problems prevent upgrade Windows. Cancel the upgrade, perform each task, (it lists only a SINGLE task), and then restart the upgrade to continue.

  • Windows needs to be restarted if necessary to system files can be changed before you continue.

    Does not help restart. He tried 3 times and he ends up doing the same thing.
    Is it possible I deleted something out of the register so far here and which is cause of all this?
    If so, is it possible to fix WITHOUT doing a new install of Windows 7?
    OR... anything can be a problem... Please HELP!

    (And please note: I am a first year student college with specialization in computer science... but I just started last semester, so I don't know what I should... yet. - though, I SHOULD have known better than to mess with the registry!) My bad).

    Thanks a lot for your time in advance, and I look forward to hear from you!  VikeMike4
    

  Erwan,
  You must read this entire thread and the State, if you have tried the steps listed here or that you tried to fix the problem.  Take a look at this article, because it has a solution for 643 errors: KB971187
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Using two monitors - application continues to pass to the other monitor

  I use two monitors.  Whenever I press the '2' key (or key keyboard 10) program that I work moves to the second monitor.  If I press '1' he moves back to the monitor 1.  I don't want to move!  Sometimes when using Quickbooks, Word, Excel, but not Internet Explorer (?).   I don't know when this started and what happened to do - so I can't "Cancel."  Help, please! :)

  Hello

  Make sure that the video card drivers are updated if they are then I suggest to uninstall and reinstall the latest graphics card drivers on the manufacturer's Web site and check if that helps.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Bluetooth connected phone can hear the ring and answer, but cannot hear or talk to the other party

  Nokia 710

  Motorola h730 Bluetooth

  Hello

  Since the issue is with Unit equipment, I suggest you contact the respective support.

  Motorola support: https://Motorola-global-portal.custhelp.com/app/product_page/FAQs/p/1422, 2690,7687

  Nokia support: http://www.Nokia.com/us-en/support/contact/

  Hope this information is useful.

• "This action cannot be completed because the other program is underway"... what?

  This dialog box "cannot complete this action because the other program is busy. Choose ' switch to ' to activate the busy program and correct the problem' open LR6 will not start. "
  I gave two options "switch to"... which takes me right in my start (Windows 7 Pro) Menu to choose whatever program I want to (apparently)) or 'Retry' which doesn't do anything.
  'Cancel' is there, but greyed out, so not really there.
  
  I just got a 2 hours with tech support chat where their only suggestion was to make me go to

  "C:\Program Files (x 86) \Common Files\Adobe, find the folder Cache SL and place it on your desk.

  They then told me to record and then try again (alas, without modification), and then told to try this "Creative Cloud Cleaner. So I downloaded that and asking him to remove 'Creative cloud' only, and Photoshop CS6 now throws as Extended CS6, I do not have and do not want. But the Extended CS6 activation dialog box wants my serial number, which are not good for Extended CS6 because 1. This is not what I paid for and 2. This isn't what have installed on this computer. I had Photoshop CS6 (not CC) and Lightroom (not CC) 6.

  Somehow, CC got installed when I updated to LR6, but not by any deliberate by me. It has been installed automatically by Adobe and now I have no way to access my files 140 thousand image dating back to 2001, which have all their adjustments made in Lightroom v6.

  I've been on Photoshop since it was in Lightroom and Aldus since v1.  Clueless on Chat at Adobe people sent me here because they have "done all steps"... sigh.

  Anyone know how I can just go back to where I was yesterday, CS6 and LR 6, no CC, on my computer Windows 7 Pro?

  Thank you, I have many customers who do not need it.

  Tom Meyer

  Creative Cloud Files is a storage space that you get on the creative cloud.

  Don't do all problems.