Even the number of folder Structure

Similar Questions

• the Windows desktop folder structure

  The standard classification of windows 'computer, desktop, my documents' has been changed and I now several "desktop" and the sub folder 'My documents', containing the same files and documents. If I try to eliminate one, records and documents are also eliminated. By dragging a subfolder in the top folder does not either.  How to eliminate these subfolders and return to the standard vista classification structure for files and documents.

  Do not use 'Old' - simply the old username on its own.  If it is not there, then you have bigger problems because you have lost the profile and which can be difficult to recover.  And you should not need to look for it - just go to it since you know where it is (or where it should be).  It is that the administrator means only something, if it's the only active administrator on the system - you must be an administrator to do.  I gave instructions on the use of the AHA in the case where this is the case and you may need to do that (sorry I can't help you with a French translation, because even if I took the French at school, I forgot the most now - 35 or more years later with essentially no use in the meantime).

  Here are my general guidelines on how to recover lost files and folders in Vista (and it may take some time if you have lost the whole profile and you may have lost some data if you use the HDD in the meantime):

  If you have Vista Business, Vista Ultimate or Vista Enterprise, you can be lucky.  They have so-called saves shadow copies, which are deleted or modified files that can be recovered in case changes/deletions made by mistake.  http://www.Microsoft.com/Windows/Windows-Vista/features/shadow-copy.aspx more information about how to use this feature to: http://blogs.techrepublic.com.com/howdoi/?p=145.

  If you have Vista Basic or Premium of Vista, shadow copies is not available; However, there is an alternative that is free and the shadow copies feature called Shadow Explorer. http://www.howtogeek.com/howto/windows-vista/recover-files-with-shadow-copies-on-any-version-of-windows-vista/.  Although it will not help you this time, it could very well save you in case this happens again.

  In case this does not work (not all files are available through shadow - it occurs periodically), here are some additional free recovery programs that might help:

  http://www.SnapFiles.com/freeware/system/fwdatarecovery.html (first try Recuva)

  http://www.SnapFiles.com/get/DiskDigger.html (try it then if Recuva does not work)

  http://www.SnapFiles.com/get/easusdfr.html

  http://www.SnapFiles.com/get/restoration.html

  http://www.SnapFiles.com/downloads/Recuva/dlrecuva.html

  http://www.SoftPerfect.com/products/FileRecovery/

  http://techpaul.WordPress.com/2008/06/23/how-to-recover-your-lost-files/

  The files are not really deleted until they are crushed (although they are no longer available through conventional methods).  If you decide to try these recovery programs, you should stop using your drive hard immediately in order not to replace the data that you are trying to recover.  He slave on another PC and launch the recovery of this PC.  Even now you have definitely lost some of them if you use the same PC.  If you can not do this (slave on another PC), you run the risk of overwriting the data with every action you do on the PC (but you may still be able to recover some or most or even all files - it's a matter of luck).

  Only you can decide if the data is important enough to take the PC to an expert data recovery to recover files (they will have better programs and hardware to do that none of us do, and I've provided above).  Do NOT go to the Geek Squad or one of these centers of store-, they generally don't know what they are doing - it take for expert data recovery.  It will cost you a little and they generally offer no guarantees.  The decision is yours.

  Good luck and I hope this helps!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Import of files .mts not nested in the camera original folder structure

  The short version:

  Is it possible to import .mts files already copied on a hard disk, without keeping the structure of folders of the camera, in first Pro CS5.5?

  The long version:

  I recently bought an iMac. Years, I edited video on Windows using Sony Vegas and Vegas Home Studio. My camera, the Panasonic Lumix TS2, sequences AVCHD video. Vegas has no problem import and edit files .mts AVCHD from a camera or a hard drive so it was not until I tried to edit a video in Premiere Pro, received the error message "type cuts not supported" and has done some research that I realized the folder structure is Christiane both at work with AVCHD. From what I can tell, the files must be in the PRIVATE sector > AVCHD > BDMV > STREAM > Configuration xxxxxxx.mts to import via the media browser.

  Here's my situation, I have hundreds of .mts files in separate folders, delivered with the photos of the same day or event. I'm on an iMac i7, using an enabled version of first Pro CS5.5 of the Master Collection. Is it possible that I can import and edit these files natively? And in the future, is there a way around to transfer the entire folder structure whenever I want to copy the video files on my hard drive? I use the bridge to import photos and it will just extract the video files of the card and plop them in the same folder. Having to transfer the videos separately, sounds like a ridiculous job around in our modern era. Thanks for any help you can provide.

  AVCHD. MTS files should import just fine without the folder structure. You lose some metadata, code time and covering, but beyond that, the files themselves should work properly.

  You have the presets of AVCHD footage? It is possible that you have lost the ability to import material; PR has a bad habit (especially on Mac) to obtain the format-amnesia when you update. Recently updated to 5.5.2?

• Keep the drive hard folder Structure...

  So one thing that always annoyed me about the feature of backup/restore with Adobe Elements is that she didn't have to keep the folder structure.  For example, I keep all my photos in Pictures\ \Weddings \Events \Etc.   That way if I want to quickly browse the hard disk a file without using Adobe I know what sound file in.

  The last time I used the Adobe restore function, it just restored all in 1 folder.  Is there a way to get around this or changed in version 10?

  Thank you

  See the help file:

  http://help.Adobe.com/en_US/elementsorganizer/using/WSae2ea3b149d0c3591ae939f103860b3d59-7 f4d_WIN.html

  who has the following (emphasis added):

  Specify a location for the restored catalog and files:

  • Select the original location to restore your catalog, photos, video files, PDF files, projects, and audio clips to their original location.

  • Select the new location to restore the catalog and pictures to a new drive or folder. Click Browse to select a location. Select restore folder original Structure to preserve the hierarchy of the folders and subfolders containing your catalog, photos, video files, files PDF, projects and audio clips

  Ken

• Restore failed image because of the message error "system cannot find the specified file (0 x 80070002). Is my file of the backup OK folder structure?

  I had to reinstall clean Windows 7 64-bit because of the failure of the RAID 1. I have a picture of my original installation system, but I can't restore it; everything I try, I get the message "system cannot find the specified file (0 x 80070002).  I work through a number of possible solutions, without success so far.

  According to the kb/951002 (that is for Vista but I can't find an alternative for Win 7) I made sure that the SYSTEM account has read permission for the backup folders and subfolders.  However, the file structure of the specified in the above article backup folder is different from my image file structure.  Specifically, article specified a structure of 'N.zip' file for the backup files but mine are a mixture of XML documents and VHD - i.e. no "zip" files Also, my GlobalCatalog file does not what kind of file, for example, it wouldn't ".wbcat" required file type specified in the article.

  The differences above could explain the inability to restore the image and if so, any ideas on what to do about it?

  Kind regards

  Ian

  Thanks Mick, will redirect the request.

  Kind regards

  Ian

• [JS] How to get the number of folder?

  Hello.

  I want to get a number of files to a specific directory.

  var folderCount = Folder("C:/test/file/").getFiles (?);    Is this what are the values required?

  Alert (folderCount.length);

  If this method is wrong, please tell me the opposite.

  Thank you

  Hello

  Download all files in the folder, and then check if it is a file or a folder. Try this one

  var myFileList = Folder("D:/Test").getFiles();)

  var folderCount = GetFoldersCount (myFileList);

  $.writeln (folderCount);

  function GetFoldersCount (fileList)

  {

  var folderCount = 0;

  for (var i = 0; i)< filelist.length;="">

  {

  var myFile = myFileList [i];

  If (instanceof file myFile)

  folderCount ++;

  }

  return folderCount

  }

• My disk cleanup not in system tools, hard disk and even the 32 system folder properties. Need help

  I have problems with my drive cleanup.exe, I try to cleapup my hard drive with disk cleanup but there is no diskcleapup in my hard drive directory, real estate system tools and also my system 32 folder...

  I just format and install the new windows xp sp3 operating system, but the disc cleapup sad does not... IDK what's going on...
  Any solution for this?

  Hi HafizAkira,

  You can try the open disk of cleaning of

  1. start-> all programs-> Accessories-> system-> disk cleanup tool.

  2. my computer-> right click on your Local C drive-> properties-> tools-> disk cleanup.

  3. click on start-> run, type &-> cleanmgr.exe-> Ok.

  I hope this helps.

• Rearrange the folder Structure

  I have used Lightroom since it came out and have always used a new folder for each new import name. As you can imagine there are a lot of folders which I would now like to compact into folders as little as possible. For example, landscape, Sport, events & family picture files. That would cover my organizational needs.

  I know that I can create these "Parent" folders and move the relevant folders in these new files, but I want only to move the images and get rid of the current structure of folder for tidy my list of files. I see no Lightroom that will allow?

  I hope it's clear and someone will have an answer. I know that in the grand scheme of things, there no matter I can find any image I want to use the filter library. This just a tidy, as the number of cases is annoying me now. He walked into a mess and a beginning 'spring clean' is necessary.

  I use Lightroom 2.6 on Windows 7.

  David.

  Move individual or even several images from one folder to another is relatively simple using drag / move. First thing you need to do is to create the new destination in the folders Panel. In the grid, click on one of the existing folders that contains your pictures, do a Select All Cmd / Ctrl +, drag the images selected in the new folder in the folders Panel.

  Lightroom can be a bit slow when moving files, so be careful to not rush things or you will end up in a tangle.

  Note also that it is probably easier and safer that move you folders in subfolders of the lowest level (that is, the folder that contains the images) rather than above the folder hierarchy.

• Are you limited the number of subfolders that can be added to a current folder within the document library?

  Original title: new folders

  Are you limited the number of subfolders that can be added to a current folder within the document library? I tried to add folders using the new folder tab and it will create not one. I hope I make this clear enough question. I'm not computer savy.  Thanks for your help.

  If you cannot create a new folder anywhere, this could apply.
   
   
  Do, or you have installed Chrome? It appears that an update of Chrome, (mid April 2013), is responsible for the loss of the option new folder. Even if Chrome has not been installed, here are two patches.
   
  
  How to remove and restore the default context Menu items 'New' in Windows 7 and Windows 8
  http://www.SevenForums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html
   
   
  If for any reason, the zip file doesn't work for you, check out the 'response' by Linda Yan in this thread.
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf/#99395761-56de-4a76-8C2A-eab498ad735a
   
   
  Tip: When you save the text in Notepad, the default file format is .txt. Replace all files.

   

• Folder structure of Smartphones from blackBerry for music in the storm

  Hello

  OK, this question is related to the functioning of the storm records. Specifically, on the SD in my Storm.

  I finally got a few songs on my Storm and they play very well. However... I don't like the way 'standard' storm affects up to my music files. Normally, I like to create/name my own files with associated music in each of them.

  I can open my Storm SD card or folders in Windows Explorer and change them around and rename and all that. I can also do it in the (Roxio) Media Manager. HOWEVER... once I've made these changes, name changes to folder/don't take place on the phone.

  The ideas people?

  Thanks for your help!

  avimia

  OK, I'm not an expert on such things, but have gone through a lot of the same pain.

  1 JSanders is correct, BB will organize and display music files based on data associated with files.  Your directory structure does not control that.  You don't need even a structure of directory on your SD card.

  2 Save. you the trouble and stop using Roxio, VCast or any other desktop as a means of file transfer application to and keeping them on your BB.  Use a music library of your choice - RealPlayer, Windows Media Player application, some - to organize your library Office in this folder structure you like.  Use this application in addition to set the file attributes you want to see reflected on the BB - that is to say in your kind of title, Album, say alternative Office library, no matter what.

  3. connect your BB to the office using mass storage Mode - if you don't know how to do this, there are other threads that address it, if I can explain it.  This essentially will allow to see and interact with the BB as if it were just another drive.  Open the two explorers windows containing the (office computer) source and destination locations of directories (BB SD card, L: drive on my machine), delete all music from your BB and start drag and drop your music as well as its directory structure of your hard drive on your SD card.

  4. to logout, BB will take a few seconds to minutes to read the files in his PB.  Once you could see things in the way that you expect.

  5. However, if not, or if there is always stray files not organized as expected, you can go to every file on your hard drive. Do a right click and properties; GoTo Summary tab and click on advanced if it is the first time, you've been there; directly replace the attributes of the file that are presented in the screen that ensued.  Click Ok.  Then repeat steps 3 and 4 above, or at least for files, you have edited this way.

  Let me know if this is not clear and if Yes if it works.

• How to get read the vsphere client in Perl folder structure?

  Hi all

  the vsphere Windows client shows a folder structure. How can I check this folder via the Perl API structure?

  See you soon,.

  Moritz

  It is built in function that does this for you.  It recursively traverses the path to the root.  It is not the best in terms of performance, but if you're not in large environments in bulk to a large number of managed entities, it will work fine.

  #! / usr/bin/perl

  use strict;

  use warnings;

  use VMware::VIRuntime;

  Use Data::Dumper;

  My % opts =)

  vmname-online {}

  type-online "s =",

  variable-online "VMNAME",.

  help-online "full name of the virtual machine.

  necessary,-online 1

  },

  );

  OPTS::add_options (%OPTS);

  OPTS::parse();

  OPTS::Validate();

  Util::Connect();

  my ($vm, $name, $path);

  $name = Opts::get_option ('vmname');

  $vm = Vim::find_entity_view (view_type-online 'VirtualMachine", filter-online {name-online $name});

  Die 'Can't find the virtual machine with the name '$name' ' unless $vm;

  $path = Util::get_inventory_path ($vm, Vim::get_vim());)

  print ' VirtualMachine '$name': $path\n ";

  BEGIN {}

  $ENV {'PERL_LWP_SSL_VERIFY_HOSTNAME'} = 0;

  }

  Perl vm-path.pl--username=administrator@vlab--password = VMware1! -Server = 172.16.254.81 - vmname = DC2_C4_RP3_VM36

  VirtualMachine 'DC2_C4_RP3_VM36': DC2/vm/DC2_C4_RP3_VM36

  You can also watch some scripts circulating in the samples, it made its own recursive function to back up the tree to get the names of data center.

  http://communities.VMware.com/docs/doc-9614

  You can modify this script to get similar results.

  If you get the paths for a large number of entities in a large environment, you might want to look forward and generate a map of hash of all the parent property and the name, then walk that yourself instead of calling back to vCenter every time.

• How can I get my folder structure in Lightroom to replicate the structure of the folder on my hard drive?

  My problems is that after Aperture import, my Lightroom folder structure does not match the structure of my file on my hard drive.  In particular, instead of being structured as in my hard drive:

  
  

  2015 (folder)

  -> 2015 - 01 - 30 (subfolder)

  -> 2015 - 02 - 15 (subfolder)

  -> 2015 - 03 - 03 (subfolder)

  
  

  All picture files are listed separately as:

  2015 01-30

  2015-02-15

  2015-03-03

  
  

  In addition, a number of files have been created in the form 01a2a201aff9c8c684928629ea41221c0fa5930ab7 where no folder does exist on my hard drive in this form and the image contains the metadata on the right date.

  
  

  I have photos dating back to 2005 and a large number of photos on different days, that makes records discovers unmanageable.

  
  

  I finished the migration of the opening in two steps (that I have not enough space to reproduce images in motion through to Lightroom)

  
  

  1 move images original opening to be references to Managed (with the structure of the file above)

  2. then used the Lightroom plug in import library of the opening (which has been copied successfully through metadata and my folder structure + edits since Aperture)

  
  

  Does anyone know how to fix this?  In particular:

  (1) addition to the folder from 2015 to structure level?

  (2) removing all off the records 01a2a201aff9c8c684928629ea41221c0fa5930ab7?

  
  

  Many thanks in advance,

  
  

  Joe
  

  In the 'files' pane, right click on the folder that you see and select "show parent folder. Repeat if necessary.

• Import of images with the folder structure

  Hello

  I want to import images into Lightroom that are on my hard drive but keeping the existing folder structure.  When I try this, even if I check include subfolders, import images, but everything in the parent folder - all subfolders are ignored.

  Is there a way to get around this?

  Thank you very much

  You select 'Add' at the top of the import dialog box when you import?  Which preserves the folder structure by adding them to the Lightroom catalog on the spot.

• Get-file provides an account of all virtual machines in the folder structure.

  Hi all

  Tried a few searches in the community, but impossible to find exactly what I was looking for.  We have a configuration folder structure in vCenter.  We have some companies that we bought over time and we set up a folder, separate them with a top-level folder and folders nested for different types of virtual machine below, something like:

  CompanyX

  -Mail servers

  -Web servers

  -DB servers

  For the purposes of internal billing, asked me to get a count of all virtual machines for each company.  I can get the count for virtual machines directly in the "CompanyX" folder, but it does not include virtual machines in subfolders.  This is the script I used so far:

  Write-Output "VM enumeration for CompanyX VMware environment Total: $((Get-dossier 'CompanyX' |)). "(Get-VM) .count) | out-file "D:\ScriptResults\CompanyX.txt" - append

  As I said, that works very well for the virtual machines in the head in the parent folder, but it does not go down to the next layer.  Is there a way to get folder do that?

  I am a novice PowerShell/PowerCLI, so forgive me if I'm missing something obvious.

  Thank you

  Bob

  Hi Bob,

  I don't know if it was different in previous versions, but in the latest PowerCLI version 4.1 U1 if you

  Get-file "CompanyX" | Get - VM

  It will retrieve the VM in the top folder and all subfolders. You can easily check this with:

  Get-file "CompanyX" | Get - VM | Select-Object - Property Name, folder

  If you only want the virtual machine in the top folder you can use:

  Get-file "CompanyX" - NoRecursion. Get - VM

  The following script will get the VM number for all companies and write the result to a .csv file.

  $ExcludeFolders = "Discovered virtual machine","other folder to exclude"
  Get-Folder vm | Get-Folder -NoRecursion | `
  Where-Object {$ExcludeFolders -notcontains $_.Name } | `
  ForEach-Object {
    $Folder = $_
    $Report = "" | Select-Object -Property Company,"Number of VM's"
    $Report.Company = $Folder.Name
    $Report."Number of VM's" = ($Folder | Get-VM | Measure-Object).Count
    $Report
  } | Export-Csv -Path CompanyVMsCount.csv -NoTypeInformation -UseCulture 
  

  If there is high records of the page you want to exclude from the list you can add them to the $ExcludeFolders variable in the first line of the script. The second line of the script gets all the 'vm' top of the folders page. The third line filter unwanted records. A few lines create the output objects. And the last line written objects in a .csv file.

  I added the Measure-Object cmdlet for the ($Folder |) Get - VM | Measure - Object). Account because otherwise you will get an error if the number is 0 or 1.

  Best regards, Robert

• Can Notes show the number of records with each folder?

  Can Notes show the number of records with each folder?

  No it can't. It would be nice tho.