Event ID 1001 - "bucket Fault 236805788, type 5..." etc. occurring 30 - 50 times per day (and almost never caused by the same component/software)

Similar Questions

• I get a bluescreen error code 1001 reads fault bucket-1514598552

  Original title: I get a blue screen. Overview of event code 1001 bed fault bucket 1514598552. I already disable all third-party software, so it's not the source of the problem.

  I don't know if that helps, but the name of the game is Skyrim. I've already put all the settings down as low as possible for my PC. I am running Windows xp Pro. x 64 edition. I followed all the instructions that I had on the error report to stop the blue screen issue. What could someone tell me is very appreciated. I have a video card GeForce GTX 260 Invidia (driver version) 285.58 and an Intel Core 2 Quad 1333 FSB.

  It can help to look at the files minidump against accidents with a debugger.

  Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?

  The following link has information about the use of Windows Live SkyDrive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop

  In addition, you do not necessarily have compress the minidump files, you can download one at a time.

• How can I use the same graph of façade in several events in a structure of the event?

  I want to display my sensorDAQ signals in a graph.but I have more than one event in the case where the structure to acquire the signal and display it in the first round of graph.the is to acquire signals from threshold and its shown in the graphic as a feedback.after the first event is executed, I'll call the second event, where the other signals are acuired and compared with signals from threshold of event 1 my question is how can I use the same control on front panel in more than two events in the structure of the event? Please answer me I am stuck.

  Hello

  I have attached here an example of doing the same thing using local variables and shift registers. Take a peek inside. Shift register is always a better option than local variables.

  Kind regards

  Amine31

  (Bravo to give good answers, mark it as a solution if your problem is resolved)

• Is it possible to sort the items in a folder by Type, Date, etc is available in Windows XP

  I am trying to sort my photos by file type and name. This does not seem possible. Why would they not incorporate a feature available in XP that was very helpful?

  It works the same as XP.  Do it how you used to.  Put it in the Details view, and then click the file Type column to sort by there.  If you do not see the Type column, right-click a column header and select it.

  There is no difference in him and XP, it works exactly the same.

• I have an error in my event viewer: the fault bucket + 45216 0xD1_athr, type the name of the event 0: BlueScreen. Can someone please explain to me how to solve this problem.

  I have an error in my event viewer: the fault bucket + 45216 0xD1_athr, type the name of the event 0: BlueScreen

  Can someone please explain to me how to solve this problem. My computer shuts down whenever I get on the internet. I need some answers please.

  You have a problem with a driver Atheros.

  It could be the network card is bad or the driver is damaged.

  If it is a wireless card, try to connect to the router with an ethernet cable. See if you can get an updated driver from the computer manufacturer's website.

  http://msdn.Microsoft.com/en-us/library/ff560244 (v = VS. 85) .aspx

• Bucket 2839121332 error, type 5 name of the event: WindowsUpdateFailure

  I have a Server 2008 r2 when it tries to do an update I get this error

  Log name: Application

  Source: Windows Error Reporting

  Date: 02/04/2012 01:30:27

  Event ID: 1001

  Task category: no

  Level: Information

  Keywords: Classic

  User: n/a

  Computer: Petrolla_DPM

  Description:

  Fault bucket 2775118483, type 5

  Name of the event: WindowsUpdateFailure

  Answer: No available

  Cabin ID: 0

  Signature of the problem:

  P1: 7.5.7601.17514

  P2: 80246008

  P3: 0EB586BD-E4D1-4E4B-A4B5-C7BBA7655F7B

  P4: download

  P5: 101

  P6: unmanaged

  P7:

  P8:

  P9:

  P10:

  Attached files:

  These files are available here:

  C:\ProgramData\Microsoft\Windows\WER\ReportArchive\NonCritical_7.5.7601.17514_1beea75889f74fc8da9b304dfb519bcce598789_539e5bb4

  Symbol of the analysis:

  Recheck for solution: 0

  Report ID: f1e861c2-7c84-11e1-b6c3-f4ce460fa530

  State: 0

  The event XML:

   

     

      1001

      4

      0

      0 x 80000000000000

     

      128431

      Application

      Petrolla_DPM

     

   

   

      2775118483

      5

      WindowsUpdateFailure

      Not available

      0

      7.5.7601.17514

      80246008

      0EB586BD-E4D1-4E4B-A4B5-C7BBA7655F7B

      Download

      101

      Unmanaged

     

     

     

     

     

     

     

     

     

     

      C:\ProgramData\Microsoft\Windows\WER\ReportArchive\NonCritical_7.5.7601.17514_1beea75889f74fc8da9b304dfb519bcce598789_539e5bb4

     

     

      0

      f1e861c2-7c84-11E1-b6c3-f4ce460fa530

      0

   

  Hello

  Thank you for visiting the Microsoft answers community site. The question you have posted is related to Windows Server and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.
  http://TechNet.Microsoft.com/en-us/WindowsServer/default.aspx

• BlueScreen - bucket Fault X64_0x9F_3_POWER_DOWN_IMAGE_NETw5v64.sys, type 0

  I often (almost once every two days) meeting of unexpected shutdown of the system when I type 'Sleep '. And occasionally the deadly bluescreen instead of the unexpected shutdown. This scene reproduced once or twice in recent months. I did a search of the event and found this error: error bucket X64_0x9F_3_POWER_DOWN_IMAGE_NETw5v64.sys, type 0.
  I have all the system drivers and installed the software update. Running Windows Vista Edition Home Premium SP2 64 - bit OS.
  
  Here are the event log:
  Log name: Application
  Source: Windows Error Reporting
  Date: 24/06/2012 09:41:59
  Event ID: 1001
  Task category: no
  Level: Information
  Keywords: Classic
  User: n/a
  Computer: XXX
  Description:
  Bucket X64_0x9F_3_POWER_DOWN_IMAGE_NETw5v64.sys of error, type 0
  Event name: BlueScreen
  Answer: http://wer.microsoft.com/responses/resredir.aspx?sid=13803&Bucket=X64_0x9F_3_POWER_DOWN_IMAGE_NETw5v64.sys&ID=35a9e075-845f-404b-b243-e609614f4430
  Cabin ID: 0
  Signature of the problem:
  P1:
  P2:
  P3:
  P4:
  P5:
  P6:
  P7:
  P8:
  P9:
  P10:
  Attached files:
  C:\Windows\Minidump\Mini062412-01.dmp
  C:\Users\XXX\AppData\Local\Temp\WER-103475-0.SysData.XML
  C:\Users\XXX\AppData\Local\Temp\WER6A27.tmp.version.txt
  These files are available here:
  C:\Users\XXX\AppData\Local\Microsoft\Windows\WER\ReportArchive\Report089ec090
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      1001
      4
      0
      0 x 80000000000000
     
      244816
      Application
      XXX
     
   
   
      X64_0x9F_3_POWER_DOWN_IMAGE_NETw5v64.sys
      0
      BlueScreen
      http://WER.Microsoft.com/responses/resredir.aspx?SID=13803 & Bucket = X64_0x9F_3_POWER_DOWN_IMAGE_NETw5v64.sys & ID = 35a9e075-845f - 404 B-B243-e609614f4430
      0
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
  C:\Windows\Minidump\Mini062412-01.dmp
  C:\Users\XXX\AppData\Local\Temp\WER-103475-0.SysData.XML
  C:\Users\XXX\AppData\Local\Temp\WER6A27.tmp.version.txt
    C:\Users\XXX\AppData\Local\Microsoft\Windows\WER\ReportArchive\Report089ec090
   
  
   
  Have found no previous discussions on this particular fault bucket. Someone please guide me to get rid of this problem. Thank you.

  NETw5v64.sys, is the driver for your network.  I would like to re - install the latest driver available.

• Problems with the blue screen, fault bucket 0xD1_nvmfdx32 + 335, type 0

  Hello
  I recently get some problems with my computer bluescreening. I am running windows vista 32-bit Ultimate edition.  The problem started when I installed different ram on the motherboard. I loaded it up after about 1-2 hours with the "Driver IRQL not less where equal" bluescreens and computer error message. Event Viewer gives a bucket fault "fault bucket 0xD1_nvmfdx32 + 335, type 0". What program or driver is this related to? Thank you
  Brett

  nvmfdx32.sys is a NVIDIA driver.

• Fault bucket: Ox9F_3_IMAGE_RTKVHDA.sys, type 0

  My computer freezes intermittently when I stop, and a blue screen appears.  It is the fault bucket, I've been doing.

  I have a Realtek High Definition Audio Sound Device, but I could not find the driver itself.

  I followed the steps that MS suggested and to disable my sound card.

  Any advice?

  Thank you!

  Hello

  References to Vista also apply to Windows 7.
  
  Updated drivers, BIOS and software control (if any) is a good idea.

  This is my generic how updates of appropriate driver:

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - reset after each
  installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps and happy Hoidays.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• event ID 1000 and event ID 1001 related to casetup32.exe and ImmunetProtectDriver

  Hello world
  I have a question. I run this PC on Windows XP SP3. a few minutes earlier, when installing Immunet 3.0, they kept appearing, several error messages associated with casetup.exe. I checked under Component Services and.
  Failing application casetup32.exe, version 3.0.0.18, failed module ntdll.dll, version 5.1.2600.6055, address 0x00010cce failure.
  Event ID: 1000
  of [note], the above error message 8 x.
  Fault-1991979944 bucket.
  Event ID: 1001
  [note], the error message above appeared x 7.
  After the first installation of Immunet 3.0, I restarted my PC. a message appeared that went something like the following, "an important engine of Immnunet could not load...". "I rebooted my PC once again, the error message still appears. After the third, the error message appears. I don't know yet at latest.
  The next (s) starting or starting system could not load:
  ImmunetProtectDriver
  ImmunetSelfProtectDriver
  Event ID: 7026
  do I need to uninstall and reinstall the program? or something else?

  Here you go:

  http://social.technet.Microsoft.com/wiki/contents/articles/Windows-Server-2008-event-ID-7026-basic-service-control-manager-operations.aspx

  Contact: http://www.immunet.com/contact/index.html

• How can I fix this bucketFault bucket 0xD1_yk60x86 + 1f2c3, type 0?

  Someone at - it experience this kind of problem on Windows Vista SONY VGN-FZ18E?

  In the section reports and problem solutions, it displays found device driver problem. I clicked on it, it shows as follows:
  A problem of Ethernet network

  You have received this message because hardware or software on your computer Windows to close unexpectedly and restart caused. It is a serious problem, commonly called a stop error or blue screen.

  Although the precise cause of this problem is not known, it seems to be related to the Ethernet network.

  What is Ethernet?

  Ethernet is a standard network that uses cables to provide network access. It's the technology more widely installed to connect computers.

  To try to resolve this problem, follow these steps. One step might solve the problem, but if it isn't, then go to the next step.

  Steps to fix this problem

  1. Look for updated network drivers

     Some drivers of hardware networks could be among the optional hardware updates in Windows Update. To find and install the optional hardware updates, follow these steps:

     1. Click here to access the Windows Update Web site online

     2. Click the check for updates in the left pane, and then click view available updates.

        What happens if I see any updates available?

        • If you see you receive updates: managed by your system administrator, you can try clicking on the link to check online for updates from Microsoft Update or Search online for updates from Windows Update, but you should maybe contact your system administrator to get the desired updates.

        • If you do not see the message above and no update is available in Windows Update after clicking on the link check the updates in the left pane, then the available updates have already been installed.

     3. Select the driver for your device updates and more updates to install.

        Note
        We recommend that you install all Important updates and recommended. These updates improve the security and stability of your computer.

     4. Click on install. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

     Note
     If there is no update of network hardware, go online to the website of the manufacturer of your network hardware to search for driver updates. If there is none, we recommend contacting the manufacturer of your computer directly for further assistance. Let them know that it was an error with your Ethernet network components and to ask if updates are available.

  2. Diagnose and repair

     The diagnosis and repair in this version of Windows can help identify and fix network connection problems.

     To run the Diagnostics and repair:

     1. Click on the Start button , then, in the search box, type network.

     2. In the list of search results, double-click network and sharing Center.

     3. In the centre network and sharing, under tasks, click diagnose and repair.

• Wait for Windows Network Diagnostics to identify the problem.

• If a problem is found, take the recommended measures.

• Run diagnose and fix again to confirm that the problem has been resolved.

• Collect information about your computer and search for a solution to Windows Vista communities

  To continue to troubleshoot this problem, you will need to collect more information on your computer and use it to find more information online.

1. Find the name of the device and the name of the driver for your Ethernet network hardware and print information on your system

   1. Click on the Start button , then, in the search box, type msinfo32.exe.

   2. In the list of search results, click msinfo32.exe.

   3. In the left pane, double-click components, double-click networkand then click map. Search no matter which adapter which refers to 'Ethernet' and then, for each of them found, write his name, type adapter, type of product and pilot (in general, the driver will be a file with a .sys file name extension and a name such as Portcls.sys).

   4. In the left pane, click System summary.

   5. Click file, click print, select a printer, and then click print.

      If you don't have a printer and you want to copy information from the system, click Edit, click select all, press CTRL + C, open a program paste the information (for example, WordPad) and then press CTRL + V.

2. Use Event Viewer to search for specific information on this issue

   The event viewer is an advanced tool that displays detailed information about important events on your computer. It can be useful when troubleshooting problems and errors with Windows and other programs.

   1. Click on the Start button , then, in the search box, type Event Viewer.

   2. In the list of search results, double-click Event Viewer. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

   3. In the left pane of Event Viewer, double-click Windows logs, and then click Application.

   4. In the Actions of the right side of the window pane, click Search.

   5. In the find dialog box, type bluescreen, and then click Next. When a blue screen event is located, close the find dialog box.

      Note
      If there are no blue screen event, it is probably because a problem report was not submitted to Microsoft. The blue screen event and its fault bucket are created that after that the problem report is submitted, so if the blue screen error occurs again, remember to choose the shipping option in the report.

   6. In the action pane, click properties of the event.

   7. Click the general tab, then search for and note the Fault bucket. A bucket of fault example is "0xD1_W_portcls!" CPortWavePci: notify + 12. »

3. Windows Vista communities can solve this problem

1. Access to Discussions in the Windows Vista Hardware and devices website: Discussions in the Windows Vista Hardware and devices
2. In the Search box, type the name of the fault bucket, and then click OK. This will give you a list of positions that include this bucket of fault. From the results, you might be able to determine if someone else also knows this problem. If you get no results, try searching for the name of the driver or the name of the sound card. If you get too many results, you can add other keywords, such as your system information, to refine your search.

3. If you don't find a solution to your problem in the search results, you can post your own question by clicking new. To ask questions, you need a Windows Live ID. We recommend that you provide as much system information about your computer as possible with your question.

Go online to get a Windows Live ID

What is one?

If you have one, or account, you already have an account. You can go online to connect with your current account information and start using

Log in now

If you don't have a Windows Live ID account, you can go online to get a Windows Live ID to register.

Get a Windows Live ID

• If you don't find a solution to your problem in Windows Vista communities, you can go online to search on the Internet for the fault bucket name or the name of the driver. If you find troubleshooting steps for your problem, we do not recommend after them unless they are for your make and model of computer.

Steps to work around this problem

Warning
These measures are intended to solve a specific problem, but could do so by temporarily disabling or removing some features on your computer.

1. Disable Receive Window Auto-Tuning

   Receive the automatic setting of the window is a feature in this version of Windows that improves network performance when using newer networking hardware, but the feature could cause problems with a hardware more previous network. Disable receive window auto might solve your problem.

   To turn off the automatic setting of the receive window:

   1. Click on the Start button , then, in the search box, type cmd. In the list of results, right-click cmd , and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

   2. At the command prompt, type netsh int tcp set global autotuninglevel = disable, and then press enter.

• When the process is complete, restart your computer. If this procedure does not resolve the problem, you can enable the setting automatic window of return receipt by repeating the steps a and b of this procedure, typing netsh int tcp set global autotuninglevel = normal, and then press enter.

• Disable your Ethernet network card

  I tried step 1,2 and 3.
  Step 3b - fault bucket 0xD1_yk60x86 + 1f2c3, type 0
  How to solve this problem?

  If you are unable to solve this problem, or if the error persists, you can disable your Ethernet network card. Once the card is disabled, you are not networking on your computer, but the error should occur. Note that this action does not affect all other networking options you may have on your computer (for example, wireless), which can be used as another way to connect to your network.

  To disable your Ethernet network card, follow these steps:

  1. Click here to open the Device Manager if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. Double-click network adapters. The name of your Ethernet network card will be displayed here. Note that there could be multiple NICs listed. If this is the case, write all the names of network card, because you may need them when you contact the manufacturer of your computer.

• Right click on the name of the network Ethernet card which is the cause of the problem, and then click disable. When the confirmation dialog box appears, click Yes. You may need to repeat this step for each listed Ethernet network.

After you disable your Ethernet network adapter, we recommend contacting the manufacturer of your computer for support.

How can I find the manufacturer of my computer?

Click on the Start button , type msinfo32 in the start search box and press ENTER. The manufacturer of your computer is listed as the manufacturer of the system in the right pane of the system information window.



   

Hello

I suggest you to uninstall and reinstall the network card and check.

A network adapter is automatically reinstalled after you have uninstalled the network card in the Device Manager on a Windows Vista-based computer

http://support.Microsoft.com/kb/945399

• BSOD Save Dump Event ID 1001 STOP 0x100000d1 after uninstalling software

  I recently decided to uninstall Avira Antivir & Comodo Firewall due to complicated updates, without success.  Uninstall was messy & unfinished.  Then, I installed Avast Antivirus, & tried to install PC Tools firewall, which was unable to complete the installation and is causing BSOD on a loop.

  The event viewer displays the following text:

  Event type: Information
  Event source: Save Dump
  Event category: no
  Event ID: 1001
  Date: 22/10/2011
  Time: 19:46:12
  User: n/a
  Computer: HOME-vvvvvvvvvvvv

  Description:
  The computer was restarted after a bugcheck.
  The bugcheck was: 0x100000d1 (0x00000002, 0x00000001, 0 x 00000018, 0xf735c716).

  A dump was saved in the: C:\WINDOWS\Minidump\Mini102211-01.dmp.

  Could someone show me how to interpret the minidump and determine where the problem (s) was/is?

  I have a Dell Inspiron 600 m, XP SP3 and can operate in Mode without failure.

  Thank you very much.

  Yes, you said that... :)

  In Support of Comodo Forums, there are many, many uninstall problems which go back several years and go on for pages and pages and pages - try things, perhaps, could be, could be, etc.

  Some type AV programs have their own special uninstall tools.  I don't know whether or not the Comodo.  I checked my notes and I don't have to Cómdo.

  When uninstall fail, some people have luck with this product:
  http://www.GlarySoft.com/products/utilities/absolute-uninstaller/

  Some people seem to reinstall everything and then try again to uninstall, and sometimes it market.

  I found this link on their forums that has a few Comodo uninstall ideas:

  https://support.Comodo.com/index.php?_m=Knowledgebase&_A=viewarticle&KBArticleID=10

  If none of this works, you can continue this Comodo problem in their forums.  Tell them you found this BSOD, here is my info, here is my report discharges BSV, etc. and how uninstall you Comodo, during the uninstallation has failed?  Clearly your BSOD come from their product.

  I hope you understand that I am not a great help because I do not use Comodo and won't install to try to understand why it does not uninstall it and what to do about it.

  Right now, I would say that you have a problem with Comodo - is not an XP problem.

  If the links above do not help, I would take it to them in their forums, where they have the Comodo product experts who work on this stuff throughout the day.

• Event ID 1001 when you try to delete a file or folder.

  Hi out there. Trying to remove a results file in a pop-up window: "Windows Explorer has encountered a problem and needs to close. We are sorry for the inconvenience. »
  and event id 1001. By clicking on the link says what SQLite requires an update - why this should affect the deletion of a file? If I have to update it, where should I save it?

  Responses received with gratitude – thank you.

  Gerry: thank you by subscribing to what I had just decided to do. I replaced the version of SQLite3 dll most recent, and restarted - that did the trick. I suspect it has something to do with Genie Timeline, which installed a recent, but not later, SQLite3.dll version - I installed a few days ago, but haven't configured it yet (it run in the background, tracking the evolution of certain folders, etc.) my external drive has just developed a fault and is replaced! To watch the files I'm trying to remove and wants to check if they have been saved, where the use of SQLite. My wife actually reminded me of this facility, so I'm very grateful to her.
  Thanks for your help, especially since I see that you have been very busy trying to help others.
  Merry Christmas.
  NotSmartinMartin.

• Update error. Failed to check the updates. Event ID 1001

  Update error. Failed to check the updates. I rebooted the PC and the Windows Update service (it is activated and automatic when you restart).  Is there an event ID 1001 in the event log that shows when I try to run WinUpdate.

  Can anyone help solve this?

  Thank you.

  How to reset windows update components

  http://support.Microsoft.com/kb/971058

• lack of screen blue bucket IP_MISALIGNED_athr.sys, type 0

  Projection of my laptop under that Windows Vista keeps blue. The last absence of blue screen bucket where the Viewer is: IP_MISALIGNED_athr.sys, type 0

  Can someone tell me how to solve this problem?

  Hello

  ATHR.sys is part of the Atheros WiFi drivers - search for updates or reinstall the present
  those to your system manufacturer (manufacturer of motherboard for customized systems) or the real
  site of the manufacturer of the device.

  If you need more troubleshooting:

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  I hope this helps.